Pull the hose off the exhaust elbow. If water flows there with engine running, the exhaust elbow is plugged or the exhaust hose inner liner is collapsed.
If no water at the exhaust elbow inlet, disconnect the hose on the discharge of the pump. If no water there, impeller is not spinning. -- Dennis C. Touche' 35-1 #83 Mandeville, LA On Fri, May 30, 2025 at 2:34 PM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I noticed today when i turned the engine on that i could not hear water > coming out the transom port. Just air bubbles. Also the temp gauge read > zero which i am guessing would happen with no water near sensor. Opened > intake strainer cap and water comes in when seacock is opened. Took cover > off sherwood water pump and looks normal inside. No missing vanes. Opened > seacock and water came out of hose from the intake. I’m stuck. Any ideas? > C&c 34+ > Universal m4-30 > Thanks. Dave > > Sent from my iPhone > Your contributions help pay the fees associated with this list and help to > keep it active. Please help by making a small contribution using PayPal > at: https://www.paypal.com/paypalme/stumurray All contributions are > greatly appreciated.
Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
