Our mast was built by Offshore Spars. I think that was an option. Perhaps the regular mast was different.
Our boat was built in 1990 Ken H. On Tue, 17 Jun 2025 at 19:16, John McCrea <johnmcc...@comcast.net> wrote: > On our former 1989 37xl we had two jib and two spin. > > On Jun 17, 2025, at 5:56 PM, Ken Heaton via CnC-List < > cnc-list@cnc-list.com> wrote: > > > On our 37/40 XL the middle halyard (on our boat this one is blue) we use > for the Genoa, which lives on the Roller Furler. The two outside ones, > port (which is a red halyard), and starboard (which is green), we use for > Spinnakers. Ours exit on the opposite side of the mast to where they are > at the top. No extra external Block at the mast top for the spinnakers, > just the internal sheeves in the masthead, port and starboard. > > Ken H. > > On Tue, 17 Jun 2025 at 17:44, Edd Schillay via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I believe two are for jib halyards so you can change headsails on the >> track while racing without pulling the other down first. The other is for >> spinn. >> >> All the best, >> >> Edd >> >> ———————————————- >> Edd M. Schillay >> Captain of the “Starship Enterprise” >> Bayliner 3788 | NCC-1701-C >> Venice Yacht Club | Venice Island, FL >> ———————————————- >> 914.774.9767 | Mobile >> ———————————————- >> Sent via iPhone 16 Pro >> iPhone. iTypos. iApologize >> >> >> On Jun 17, 2025, at 3:36 PM, Languid Refiner via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> >> Hi Everyone, >> >> We are currently trying to assemble the mast (My son Oden and myself), >> but we are not exactly sure where everything goes and what everything is >> for, lol. A lot was disassembled when the boat was trucked from Buffalo and >> we are familiarizing ourselves with this rig. >> >> I have three lines coming out of the top of my mast facing the bow, and I >> was wondering if anyone knows what they are all for? The one in the middle >> is for the jib halyard, but I am not sure about the other two. Spinnaker? >> >> I am also wondering about the spinnaker setup for this mast. Is there >> supposed to be a block at the top of the mast for the spinnaker? And does >> the spinnaker halyard run on the outside of the mast, or does it go through >> the inside? >> >> I can get more photos too and we're back at the boat now. >> >> Thanks in advance for any help, >> >> Noah and Oden >> Your contributions help pay the fees associated with this list and help >> to keep it active. Please help by making a small contribution using PayPal >> at: https://www.paypal.com/paypalme/stumurray All contributions are >> greatly appreciated. >> Your contributions help pay the fees associated with this list and help >> to keep it active. Please help by making a small contribution using PayPal >> at: https://www.paypal.com/paypalme/stumurray All contributions are >> greatly appreciated. > > Your contributions help pay the fees associated with this list and help to > keep it active. Please help by making a small contribution using PayPal > at: https://www.paypal.com/paypalme/stumurray All contributions are > greatly appreciated. > >
Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
