This is a random video example of the double nut. She does a pretty good job.
https://youtu.be/HRHWF6JWqko?si=-iCkHyuGNaktHnpZ For particularly difficult studs where the nut have difficulty locking together sufficiently to not spin you can us flanged lock nuts pictured in the link below. The flanges kind of ratchet-lock against one another when installed flange to flange. https://www.tapcoinc.com/images/uploads/92/large_flange_serrated_lock_nut__hero.png Jun 23, 2025 08:27:17 Dennis C. via CnC-List <cnc-list@cnc-list.com>: > The most common method of removing studs is to double nut it. That is, screw > a nut down on the exposed threads then screw a second nut down on top of the > first. Use two wrenches to tighten the nuts together. Then use a wrench on > the first nut to try to loosen the stud. In theory, the second nut will keep > the first from loosening and allow it to turn the stud. > > -- > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > On Mon, Jun 23, 2025 at 6:57 AM David Knecht via CnC-List > <cnc-list@cnc-list.com> wrote: >> Hi Douglas- I thought about replacing the studs as one is likely thread >> damaged, but I have no idea how to do that. They are supposed to be >> threaded into the manifold. Any suggestions? Dave >> >> David Knecht >> >
Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
