Noahs? https://noahsmarine.com/en-us/collections/marine-plywood-and-panels/products/teak-holly
On Mon, Jul 21, 2025, 10:18 AM Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > Maybe Exotic Lumber near Annapolis > > Joel > > > > On Mon, Jul 21, 2025 at 9:48 AM David Knecht via CnC-List < > cnc-list@cnc-list.com> wrote: > >> I talked to Boulter and they confirmed that they can't get Teak and Holly >> plywood either. They have a few sheets of 3/8" left and that is it. Looks >> like I may be looking at synthetic (Plasteak etc.). Dave >> >> David Knecht >> S/V Aries >> 1990 C&C 34+ >> New London, CT >> >> [image: pastedGraphic.tiff] >> >> On Jul 21, 2025, at 8:58 AM, Danny Haughey via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >> David, >> Did you try Boulter Plywood up near Boston. They may have some old stock >> laying around. I replaced the entire Salon soul in my Tartan 40 through >> them. They even cut the pieces down for me and made my work load a little >> less cumbersome! The tartan did have 2, actual rectangular pieces that >> made up most of the replacement. I measured the striping and they matched >> it perfectly. >> >> >> Thank you, >> Daniel Haughey >> 839 >> 401-743-0522, >> >> >> ---------- Original Message ---------- >> From: "paul.hood via CnC-List" <cnc-list@cnc-list.com> >> To: CnC CnC discussion list <CnC-List@cnc-list.com> >> Cc: "paul.hood" <paul.h...@rogers.com> >> Subject: Stus-List Re: Teak and Holly >> Date: Sun, 20 Jul 2025 19:54:35 -0400 >> >> >> David >> >> I took out my flooring and I put down what I remember as being Plasteak >> about 13 years ago and love it. Haven't touched it, easy to clean and >> looks great. I'd do that again in a heartbeat. >> >> Paul Hood >> 416.799.5549 >> >> >> >> >> -------- Original message -------- >> From: David Knecht via CnC-List <cnc-list@cnc-list.com> >> Date: 2025-07-20 6:06 p.m. (GMT-05:00) >> To: CnC CnC discussion list <CnC-List@cnc-list.com> >> Cc: David Knecht <davidakne...@gmail.com> >> Subject: Stus-List Teak and Holly >> >> >> I was considering replacing a delaminated floor panel in my boat, and the >> local wood supplier told me that they could not get teak and holly plywood >> anymore due to some import restriction. Has anyone else encountered this >> or know a way around it? Dave >> >> David Knecht >> S/V Aries >> 1990 C&C 34+ >> New London, CT >> [image: pastedGraphic.tiff] >> Your contributions help pay the fees associated with this list and help >> to keep it active. Please help by making a small contribution using PayPal >> at: https://www.paypal.com/paypalme/stumurray All contributions are >> greatly appreciated. >> >> >> Your contributions help pay the fees associated with this list and help >> to keep it active. Please help by making a small contribution using PayPal >> at: https://www.paypal.com/paypalme/stumurray All contributions are >> greatly appreciated. > > Your contributions help pay the fees associated with this list and help to > keep it active. Please help by making a small contribution using PayPal > at: https://www.paypal.com/paypalme/stumurray All contributions are > greatly appreciated.
Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
