Hey C&C Sailors - I’ll be replacing my fixed Martec prop with a folding 2-blade prop this winter when it’s time to haul out.
I’m being asked by Flex-o-Fold what my ‘Shaft Taper’ is. According to the boat user manual the taper is ‘standard’ but my understanding is that ‘standard taper’ can mean 1/10, 1/16, or 1/20. According to Flex-o-fold they need this shaft taper info for the correct adapter sleeve. The following info applies: \-=-=-= 1\. Boat - Make and Model C&C 30, Mark II 2\. Engine - Make and Model - Yanmar 2GM20F 3\. Transmission Reduction Gear Ratio - 2.62 : 1 4\. Displacement (Weight) 8300 lb 5\. Water Line Length 25.75 ft 6\. Shaft Size or Sail Drive Model - 1 inch conventional shaft 7\. Propeller Rotation left hand or right Hand - Right Hand 8\. Current Propeller Size and Type (i.e. fixed 3-blade, feathering, etc...) Martec RH 15D x 11P X1 (photo attached) I have also attached photos of the shaft drawing (from user manual) and Martec fixed prop. [Martec Prop Photo](https://photos.app.goo.gl/tWbUW7CscPQz38MZ7 "Martec Prop Photo") https://photos.app.goo.gl/tWbUW7CscPQz38MZ7 [Shaft Diagram Photo](https://photos.app.goo.gl/WwZiFewzcUVDwdL87 "Shaft Diagram Photo") https://photos.app.goo.gl/WwZiFewzcUVDwdL87 Thanks! \-Eddie Wills C&C 30 Mark II ‘Mystic Star’
Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
