You can also try the cleaner used on ceramic cooktops. It has a very fine abrasive of about 1000-2000 grit / micron range.
/John > On Nov 1, 2025, at 8:29 PM, Andrew Burton via CnC-List > <[email protected]> wrote: > > Try toothpaste. Honestly. It works with headlights. > Andy > > Andrew Burton > 26 Beacon Hill > Newport, RI > USA 02840 > > http://sites.google.com/site/andrewburtonyachtservices/ > +401 965-5260 > >>> On Nov 1, 2025, at 20:26, Matthew Wolford via CnC-List >>> <[email protected]> wrote: >>> >> >> Janet: >> >> The first thing I noticed in your photo was the screws, which on my 42 >> Custom were the main sources of leaks. Per the SOP from this list, I >> eliminated the screws and screw holes by replacing each lens. With the lens >> removed, I cleaned up the cavities first using a putty knife to remove old >> sealant then using wire brushes, shop rags, and acetone. I also filled the >> screw holes with an epoxy mixture. Once the holes were filled and the >> cavity was fully clean, I applied 3M double-sided tape and put each >> replacement lens in place using the “tape hinge” method. After that, the >> Dow 795 is used. My windows haven’t leaked since (10 years or so). >> >> Matt >> Your contributions help pay the fees associated with this list and help to >> keep it active. Please help by making a small contribution using PayPal at: >> https://www.paypal.com/paypalme/stumurray All contributions are greatly >> appreciated. > Your contributions help pay the fees associated with this list and help to > keep it active. Please help by making a small contribution using PayPal at: > https://www.paypal.com/paypalme/stumurray All contributions are greatly > appreciated.
Your contributions help pay the fees associated with this list and help to keep it active. Please help by making a small contribution using PayPal at: https://www.paypal.com/paypalme/stumurray All contributions are greatly appreciated.
