RaQ XTR will not boot/progress past setup
* Solution: RMA (only); electrical disturbance on the first
production line (faulty/deffective).
RaQ XTR will not recognize extra drives for RAID array
* Solution: perform OS restore XTR with all drives present
RaQ XTR does not work with 4 memory modules:
* Solution: Unknown; temporary fix: limit RAM to placement
in only 2 modules (possible later RMA).
RaQ XTR has re-occuring excessive CPU usage
* Solution: telnet in, run top, kill process manually
RaQ XTR has re-occuring RAID-1 and RAID-5 failures
* Solution: (?) 2.6.17 firmware update (unconfirmed). Any
idea where to obtain this with detail instructions?
To re-use any drives (which aren't faulty), you need to
remove them, and run fdisk on them to earse any partition.
*DO NOT* re-use without doing this, as it will screw up
the RAID-1/5 arrays.
RaQ XTR has serial ports reversed in manual
* Solution: reverse diagram on page 237 of XTR manual
RaQ XTR PCI SCSI card isn't recognized
* Solution: unknown.
RaQ XTR has 250-site imposed limit (undocumented)
* /usr/lib/perl5/site_perl/5.005/Cobalt/Product_raq.pm,
locate "$Site_Max" and change. Reboot server.
Please feel free to add to the (growing) list...
---
Jay Tingley, BlackSun
[EMAIL PROTECTED]
_______________________________________________
cobalt-developers mailing list
[EMAIL PROTECTED]
http://list.cobalt.com/mailman/listinfo/cobalt-developers
