We have installed 1 GB RAm in our RaQ4-machines, and it works .. so i am a bit suprised about your message..
regs, Thorsten > -----Urspr�ngliche Nachricht----- > Von: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]Im Auftrag von Chris > Johnson > Gesendet: Mittwoch, 9. Januar 2002 22:29 > An: [EMAIL PROTECTED] > Betreff: Re: [cobalt-developers] Ram Upgrade on RaQ4 > > > > > From : "LISTAS" <[EMAIL PROTECTED]> > > Subject : [cobalt-developers] Ram Upgrade on RaQ4 > > > > I�m planning to upgrade the ram memory of my raq4. > > Can I damage the box if i use 133Mhz ram?. I think cobalts > > use the 100 Mhz ones. > > Cobat says the box accept maximun 512 MB > > Did anybody try to plug 2 x 512 MB modules?. > > PC133 is a superset, so use whatever you have that works. > There is a slight risk that the memory chip geometry may > not be supported but if the system boots and sizes memory > there is a really good chance you are fine. > > The 512 MB restrction is from the North bridge. The ALI > hardware only goes up to 512 MB. > > If you plug in 2 512 MB modules, it may be an interesting > experiment. I know you will not see 1 GB of memory. The > question is how much memory would be found, whether it will > fail, and would the failure be exciting :-). > > cj* > > _______________________________________________ > cobalt-developers mailing list > [EMAIL PROTECTED] > http://list.cobalt.com/mailman/listinfo/cobalt-developers > > _______________________________________________ cobalt-developers mailing list [EMAIL PROTECTED] http://list.cobalt.com/mailman/listinfo/cobalt-developers
