Hi Guys,
I have a Qube3 which is on a LAN with a separate internet gateway.
Currently if the gateway goes down I get a message indicating that the
gateway is not reachable.
What I'd like to do is add a capability to monitor the external address of
the gateway as well as (or instead of) the internal address.
Why? I have some clients who would like to use and Apple AirPort Base
Station as their internet gateway. Due to their location, the intention is
to use the builtin modem. All is well except that although the Apple
AirPort Base Station can be set to never disconnect, it will not reconnect
if there is a dropout ... it will reconnect only when it "needs" to. Since
my clients have static IP addresses for their modem connections all that is
needed is some traffic to the "external" address to initiate a reconnection.
A simple solution would be to have a cron job ping the address. This would
work, but I'd like the Active Monitor to advise me when the connection went
down and when it was re-established. It would be really nice to have a GUI
screen to enter the IP address to be monitored.
Has anyone done this before?
Can I simply replicate the code which monitors the existing gateway address
and modify it to monitor the external address?
Cheers, Malcolm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Information Alchemy Pty Ltd
ACN 089 239 305
Canberra, Australia
Malcolm McLeary Mobile: 0412 636 086
Managing Director Email: [EMAIL PROTECTED]
This message was sent using Outlook Express 5.0 for Macintosh.
_______________________________________________
cobalt-developers mailing list
[EMAIL PROTECTED]
http://list.cobalt.com/mailman/listinfo/cobalt-developers
