<snip> > Obviously the main problem is the Qube only has 1 serial > port. Both the > modem and UPS software work fine through the on-board serial > port, and the > UPS software can easily be configured to use a different port > other than > ttyS0 > > Does anyone know of a PCI serial card compatible with the Qube3. > > My prefered solution would be an Internal serial card. > > I've tried a PCI serial board, but it required setserial to > configure it > which isn't shipped in the Qube's software. > > But anything which works will be appreciated. </snip>
I've never tried this myself, so unsure how the results will go, but your first suggestion of a PCI serial card should do the trick. You should be able to install setserial from rpm by doing: rpm -Uvh ftp://ftp.rpmfind.net/linux/redhat/6.2/en/os/i386/RedHat/RPMS/setserial-2.15-3.i386.rpm And then continue to configure the card. (I use a PCI serial card at home on a SuSE system and had no problems activating the card for use in Linux) Hope that helps. Regards, Andy [EMAIL PROTECTED] http://www.raqpak.com <-- Unofficial FAQs and PKGs _______________________________________________ cobalt-developers mailing list [EMAIL PROTECTED] http://list.cobalt.com/mailman/listinfo/cobalt-developers
