Hi all. I have a RAQ4r which is telling me the Raid 1 array has failed. All it says is 'A Hard Drive Has Failed...' and not if it is the left or right.
mdstat has the following info... [root /proc]# cat mdstat Personalities : [linear] [raid0] [raid1] [raid5] [translucent] read_ahead 1024 sectors md1 : active raid1 hdc1[1] hda1[0](F) 3072256 blocks [2/1] [_U] md3 : active raid1 hdc3[1] hda3[0](F) 1536128 blocks [2/1] [_U] md4 : active raid1 hdc4[1] hda4[0](F) 35375680 blocks [2/1] [_U] md6 : active raid1 hdc6[1] hda6[0](F) 131456 blocks [2/1] [_U] unused devices: <none> [root /proc]# I assume the Right hand hard drive is hda (Primary) and the Left hand hard drive is hdc (Secondary). can anyone tel me if there is a way of telling if it is the right or left hard drive from the above. Does the [_U] indicate that hda has failed and [U_] would indicate hdc has failed ? Is there anywhere else that holds some more info ? there is mo mdadm or raidtools on the RQA4r that I can find. Any help would be welcome. Cheers Paul.
_______________________________________________ Cobaltfacts site list [email protected] http://list.cobaltfacts.com/mailman/listinfo.cgi/cobaltfacts
