On 03/12/2009 09:48 PM, Gennadiy Nerubayev wrote: > On Thu, Mar 12, 2009 at 3:21 PM, James Cammarata <[email protected]> wrote: > >>> $SNIPPET('post_install_network_config') >>> >> It didn't seem to interpret it at all. Any modifications made to the >> snippet that would cause the render to fail? >> > > Right, that's the problem. As mentioned in the original email, the only time > it renders at all is in profile view. No modifications have been made; I did > a diff against the latest git just in case which confirmed no changes. > > >>> Note: I used the sample kickstart as my own one contains quite a bit of >>> internal stuff, but the effect of the problem is the same. I also just >>> noticed that the gateway setting gets applied to both interfaces, which >> is >>> rather undesirable.. hmm. > > > That does seem odd... and probably a bug. The gateway should only be >> applied to the interface that actually shares that network. >
The gateway should go to /etc/sysconfig/network, and should not be applied to individual interfaces. I thought I wrote it that way, if not, that should be fixed. Calculating on which network said gateway belongs is way too complicated, so I really think we should stick with /etc/sysconfig/network. Gennadiy, could you try removing the static route from the interface, or try /24 instead of /255.255.255.0? -Jasper -Jasper _______________________________________________ cobbler mailing list [email protected] https://fedorahosted.org/mailman/listinfo/cobbler
