>>   
>>     
>
>
> i have also tried to to add them before the
>
> #for dhcp_tag in $dhcp_tags.keys():
>
> but the same result - where should they go ?
>
>   

sorry and the template..

# ******************************************************************
# Cobbler managed dhcpd.conf file
#
# generated from cobbler dhcp.conf template ($date)
# Do NOT make changes to /etc/dhcpd.conf. Instead, make your changes
# in /etc/cobbler/dhcp.template, as /etc/dhcpd.conf will be
# overwritten.
#
# ******************************************************************

ddns-update-style interim;

allow booting;
allow bootp;
#if $omapi_enabled
omapi-port $omapi_port;
#end if

ignore client-updates;
set vendorclass = option vendor-class-identifier;

subnet 192.168.10.0 netmask 255.255.255.0 {
     option routers             192.168.10.1;
     option domain-name-servers 192.168.10.4;
     option subnet-mask         255.255.255.0;
     range dynamic-bootp        192.168.10.100 192.168.10.254;
     filename                   "/pxelinux.0";
     default-lease-time         21600;
     max-lease-time             43200;
     next-server                $next_server;
}

host non-cobbler-host {
    hardware ethernet 00:12:17:91:06:b1;
    fixed-address 192.168.10.49;
}

#for dhcp_tag in $dhcp_tags.keys():
    ## group could be subnet if your dhcp tags line up with your subnets
    ## or really any valid dhcpd.conf construct ... if you only use the
    ## default dhcp tag in cobbler, the group block can be deleted for a
    ## flat configuration
# group for Cobbler DHCP tag: $dhcp_tag

group {
        #for mac in $dhcp_tags[$dhcp_tag].keys():
            #set iface = $dhcp_tags[$dhcp_tag][$mac]
    host $iface.name {
        hardware ethernet $mac;
        #if $iface.ip_address:
            fixed-address $iface.ip_address;
        #end if
        #if $iface.subnet:
            option subnet-mask $iface.subnet;
        #end if
        #if $iface.gateway:
            option routers $iface.gateway;
        #end if
        #if $iface.netboot_enabled:
            filename "$iface.filename";
            ## Cobbler defaults to $next_server, but some users
            ## like to use $iface.system.server for proxied setups
            next-server $next_server;
            ## next-server $iface.next_server;
        #end if
    }
        #end for
}
#end for
_______________________________________________
cobbler mailing list
[email protected]
https://fedorahosted.org/mailman/listinfo/cobbler

Reply via email to