All, If I use Cobbler 2.0 to install RHEL to a ProLiant DL380=G6 or BL460-G6, everything works fine. If I use Cobbler 2.2 to install the same RHEL (imported from ISO) to the same ProLiant, the install itself is okay, but when PXE tries to switch to booting from the HD it fails with a red screen saying "Illegal OpCode" and a bunch of hex information. If I intervene to boot directly from the HD, or if I make PXE (NIC boot) no longer first in the list, it boots fine, so the HD itself seems to be okay. Both machines have current BIOS and firmware (as reported by the iLO).
Does this ring any bells? Regards, Doug ---- MC Linux Infrastructure, 970-898-4860, Fort Collins 3UR8 (MS 57) "If you keep trying, you will occasionally do something worthwhile." -- Seymour Cray _______________________________________________ cobbler mailing list [email protected] https://fedorahosted.org/mailman/listinfo/cobbler
