Greg
Updated the kickstart, same error
accepteula
install --firstdisk --overwritevmfs
# RootPassword is taken from the default setting of cobbler
rootpw --iscrypted $$default_password_crypted
reboot
%include /tmp/networkconfig
%pre --interpreter=busybox
# extract network info from bootup
VMK_INT="vmk0"
VMK_LINE=$$(localcli network ip interface ipv4 get | grep "$${VMK_INT}")
IPADDR=$$(echo "$${VMK_LINE}" | awk '{print $$2}')
NETMASK=$$(echo "$${VMK_LINE}" | awk '{print $$3}')
GATEWAY=$$(esxcfg-route | awk '{print $$5}')
Error in the Python code which Cheetah generated for this template:
================================================================================
EOL while scanning string literal
(cheetah_DynamicallyCompiledCheetahTemplate_1336515429_59_40496.py, line 81)
Line|Python Code
----|-------------------------------------------------------------
79 |
80 | try:
81 | return eval('''VFFSL(SL,"echo",True) "$${VMK_LINE}" | awk
'{print $$2}'''', globals(), localsDict)
^
82 | return self._CHEETAH__errorCatcher.warn(exc_val=e, code=
u'VFFSL(SL,"echo",True) "$${VMK_LINE}" | awk \'{print $$2}\'' , rawCode=
u'$(echo "$${VMK_LINE}" | awk \'{print $$2}\')' , lineCol=(22, 9))
83 |
84 | def __errorCatcher4(self, localsDict={}):
================================================================================
Here is the corresponding Cheetah code.
** I had to guess the line & column numbers, so they are probably incorrect:
Line 11, column 21
Line|Cheetah Code
----|-------------------------------------------------------------
8 |install --firstdisk --overwritevmfs
9 |
10 |# RootPassword is taken from the default setting of cobbler
11 |rootpw --iscrypted $$default_password_crypted
^
12 |
13 |reboot
14 |
Thanks
John
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Greg Swift
Sent: 08 May 2012 22:36
To: cobbler mailing list
Subject: Re: [cobbler] KS generation error
On Tue, May 8, 2012 at 3:51 PM, John Paget Bourke
<[email protected]> wrote:
> Greg & List,
>
>
>
> Thanks for the reply. I have finally got back to it. Not sure the
> error is reporting the right location in the script.
>
>
>
> I am back to square one with this. When I have 1 $ I get an error and
> when I have 2 $ I get an error. Raw data and error below.
>
>
>
> Here is the raw kickstart file
>
>
>
>
>
> # Sample kickstart for ESXi 5.0
>
> # William Lam
>
> # www.virtuallyghetto.com
>
> #########################################
>
>
>
> accepteula
>
> install --firstdisk --overwritevmfs
>
>
>
> # RootPassword is taken from the default setting of cobbler
>
> rootpw --iscrypted $default_password_crypted
>
>
>
> reboot
>
>
>
> %include /tmp/networkconfig
>
>
>
> %pre --interpreter=busybox
>
>
>
> # extract network info from bootup
>
> VMK_INT="vmk0"
>
> VMK_LINE=$$(localcli network ip interface ipv4 get | grep
> "$${VMK_INT}")
>
> IPADDR=$$(echo "$${VMK_LINE}" | awk '{print $$2}')
>
> NETMASK=$$(echo "$${VMK_LINE}" | awk '{print $$3}')
>
> GATEWAY=$$(esxcfg-route | awk '{print $$5}')
try that?
I'd assume that the templating engine is going after all the $'s not just the
first one in the line. So thus you error cause it doesn't know what $VMK_INT,
$VMK_LINE, $2, $3, and $5 are.
-greg
_______________________________________________
cobbler mailing list
[email protected]
https://fedorahosted.org/mailman/listinfo/cobbler
_______________________________________________
cobbler mailing list
[email protected]
https://fedorahosted.org/mailman/listinfo/cobbler
