Hmmmm … so if I have 12 blades to build, is there a quicker way to do this? I 
would like to boot from ISO (the same ISO for all 12 systems) and have cobbler 
take over. I don’t think this will work without PXE based on what you’re 
telling me.


Regards,

Sam

From: [email protected] 
[mailto:[email protected]] On Behalf Of Dan White
Sent: Tuesday, March 19, 2013 1:45 PM
To: cobbler mailing list
Subject: Re: [cobbler] Assigning a system to a profile

The default behavior of the ISO is to boot from local media after a delay

Look at a file : <iso root>/isolinux/isolinux.cfg
“Sometimes I think the surest sign that intelligent life exists elsewhere in 
the universe is that none of it has tried to contact us.”
Bill Waterson (Calvin & Hobbes)

________________________________
From: "Sam Sen" <[email protected]<mailto:[email protected]>>
To: "cobbler mailing list" 
<[email protected]<mailto:[email protected]>>
Sent: Tuesday, March 19, 2013 1:36:07 PM
Subject: Re: [cobbler] Assigning a system to a profile



When the system boots up and loads the ISO, I thought it would automatically 
force the system to load a profile. In theory since there is no OS installed, 
it will start the OS installation without having you select from the cobbler 
menu.



Is this feature not available for non-pxe boot?



Dan White <[email protected]<mailto:[email protected]>> wrote:


So what is happening that should not happen ?

Contrarywise, what is not happening that should ?
“Sometimes I think the surest sign that intelligent life exists elsewhere in 
the universe is that none of it has tried to contact us.”
Bill Waterson (Calvin & Hobbes)

________________________________
From: "Sam Sen" <[email protected]<mailto:[email protected]>>
To: "cobbler mailing list" 
<[email protected]<mailto:[email protected]>>
Sent: Tuesday, March 19, 2013 1:22:47 PM
Subject: Re: [cobbler] Assigning a system to a profile
It’s there …


[root@phl-00-cobbler iso]# cobbler profile list
   ORACLE


Regards,

Sam

From: 
[email protected]<mailto:[email protected]>
 [mailto:[email protected]] On Behalf Of Dan White
Sent: Tuesday, March 19, 2013 1:12 PM
To: cobbler mailing list
Subject: Re: [cobbler] Assigning a system to a profile

What does the command "cobbler profile list" return ?

If one of the lines is not "ORACLE", then that is your first problem.
“Sometimes I think the surest sign that intelligent life exists elsewhere in 
the universe is that none of it has tried to contact us.”
Bill Waterson (Calvin & Hobbes)

________________________________
From: "Sam Sen" <[email protected]<mailto:[email protected]>>
To: [email protected]<mailto:[email protected]>
Sent: Tuesday, March 19, 2013 1:06:56 PM
Subject: [cobbler] Assigning a system to a profile

Not sure what I’m missing but I’m attempting to automatically install the OS 
with our new blade systems using a cobbler iso (generated by buildiso). The 
cobbler menu shows up with the list of available systems, but I want it to 
automatically install when it loads the ISO. I don’t have DHCP hence the use of 
the buildiso command.

I added a new system by running the following command. Please note, the install 
works fine when I select the system but that’s not what I want. Notice I have 
the “mac” specified and I went as far as using the mac address of eth0 as the 
name for the system. Both times, I’m greeted with the menu and I’m forced to 
choose.

cobbler system add --name=blade1 –mac=XX:XX:XX:XX:XX:XX --profile=ORACLE 
--interface=bond0 --interface-type=bond --bonding-opts="mode=6 miimon=1000" 
--ip-address=172.31.20.45 --hostname=blade1.domain.com --ksmeta='server_type=DB 
disk_layout=BLADES_ORACLE' --subnet=255.255.255.0 --gateway=172.31.20.250 
--kopts='ksdevice=eth0 ip=172.31.20.45 netmask=255.255.255.0 dns=172.31.10.220 
gateway=172.31.20.250' --static=1



--
Sam Sen
Sr Systems Administrator
215.913.4797

Aria Systems, Inc.
600 Reed Road, Suite 302
Broomall, PA 19008
www.ariasystems.com<http://www.ariasystems.com/>


_______________________________________________
cobbler mailing list
[email protected]<mailto:[email protected]>
https://lists.fedorahosted.org/mailman/listinfo/cobbler

_______________________________________________
cobbler mailing list
[email protected]<mailto:[email protected]>
https://lists.fedorahosted.org/mailman/listinfo/cobbler

_______________________________________________
cobbler mailing list
[email protected]<mailto:[email protected]>
https://lists.fedorahosted.org/mailman/listinfo/cobbler
_______________________________________________
cobbler mailing list
[email protected]
https://lists.fedorahosted.org/mailman/listinfo/cobbler

Reply via email to