ok my issue got resolved with this method. Thank you to the list who had the good intentions of helping me out.
https://fedorahosted.org/cobbler/ticket/606 Best Regards Sahibzada .Z. Ahmad System Administrator cell: 1(678)267-0265 (US) cell: 1(647)339-5434 (Canada) From: [email protected] To: [email protected] Subject: RE: [cobbler] unable to see cobbler pxe menu Date: Mon, 21 Apr 2014 17:31:14 +0000 Ok i noticed something else as well. my pxelinux.0 in /var/lib/tftpboot directory is 0 bytes. I tried to copy it from another directory and when i run "cobbler sync" again it zeros it out. Best Regards Sahibzada .Z. Ahmad System Administrator cell: 1(678)267-0265 (US) cell: 1(647)339-5434 (Canada) From: [email protected] To: [email protected] Date: Mon, 21 Apr 2014 16:12:33 +0000 Subject: Re: [cobbler] unable to see cobbler pxe menu It does not get to pxe menu.but i was playing around with the tftp configs and now i get this error. PXE-T02: Forbidden directory PXE-E3C: TFTP error - Access violation Best Regards Sahibzada .Z. Ahmad System Administrator From: [email protected] Date: Mon, 21 Apr 2014 21:11:42 +0530 To: [email protected] Subject: Re: [cobbler] unable to see cobbler pxe menu Hi, No, its not necessary. If your cobbler is configured properly and your systems are configured to boot from network, you will get the default pxe boot menu. Let me know your system are able to load pxelinux.0 or not after getting the IP address from dhcp server. On Mon, Apr 21, 2014 at 8:03 PM, Zulkifal Ahmad <[email protected]> wrote: Hi santosh ! 1. is it necessary to have a system listed in dhcp config. I made a pool of ips and the client system is getting its ip from it? unless you need to ask about any specific configuration. 2. The /etc/xinetd.d/tftp file has the parameter changed to "disable=no" 3. xinetd is running 4.iptables and selinux are disabled. Best Regards Sahibzada .Z. Ahmad System Administrator cell: 1(678)267-0265 (US) cell: 1(647)339-5434 (Canada) From: [email protected] Date: Sat, 19 Apr 2014 08:42:21 +0530 To: [email protected] Subject: Re: [cobbler] unable to see cobbler pxe menu Hi Sahibzada, Please check the following: => make sure the system is listed in the dhcp configuration. => check the tftpd configuration, make sure it is not disabled. => make sure xinetd daemon is running. => at last disable selinux and re-check. Regards Santosh Kumar Gupta On Sat, Apr 19, 2014 at 1:01 AM, Zulkifal Ahmad <[email protected]> wrote: Hi List, I dont know if anyone has posted this before., but I setted up a cobbler server on CentOS65 and the command cobbler check gives no error. created a distro,profile and added a system but when I network boot the system to be installed it goes to this balck screen where it shows the client ip, dhcp /cobbler server ip MAC address of client machine and wait there without proceeding forward. At this point I dont know how to troubleshoot , what is wrong with my configuration to see that menu screen,where I can select my profile. Any help is highly appreciated. Best Regards Sahibzada .Z. Ahmad System Administrator _______________________________________________ cobbler mailing list [email protected] https://lists.fedorahosted.org/mailman/listinfo/cobbler _______________________________________________ cobbler mailing list [email protected] https://lists.fedorahosted.org/mailman/listinfo/cobbler _______________________________________________ cobbler mailing list [email protected] https://lists.fedorahosted.org/mailman/listinfo/cobbler _______________________________________________ cobbler mailing list [email protected] https://lists.fedorahosted.org/mailman/listinfo/cobbler _______________________________________________ cobbler mailing list [email protected] https://lists.fedorahosted.org/mailman/listinfo/cobbler
_______________________________________________ cobbler mailing list [email protected] https://lists.fedorahosted.org/mailman/listinfo/cobbler
