I found a problem:
Cocoon takes all available memory after ~ 500-600 accesses to
http://localhost:8080/cocoon/xsp/simple
and Resin crashes:
#
# An EXCEPTION_ACCESS_VIOLATION exception has been detected in native code outside the
VM.
# Program counter=0x50397707
#
Clearly, something is wrong with XSP... Some resources are not released.
cocoon.log file does not have any errors.
Berin,
could you verify this behaviour?
Vadim
> -----Original Message-----
> From: Berin Loritsch [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 09, 2001 12:24 PM
> To: [EMAIL PROTECTED]
> Subject: Re: IT WON'T BREAK!!! (was Re: New Excalibur--Time to redo your Cocoon Load
>Tests)
>
>
> Vadim Gritsenko wrote:
> >
> > > -----Original Message-----
> > > From: Berin Loritsch [mailto:[EMAIL PROTECTED]]
> > > Sent: Thursday, August 09, 2001 11:23 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: IT WON'T BREAK!!! (was Re: New Excalibur--Time to redo your Cocoon Load
>Tests)
> > >
> > >
> > > Berin Loritsch wrote:
> > > >
> > > > My initial JMeter load tests show no error messages and plenty of reason to
>smile.
> > > > I simulated 20 users each hitting the server every 300ms. When the JVM was in
> > > > a garbage collection cycle, the longest response time was 842ms. During normal
> > > > opperation, responses were between 0ms and 20ms (55% at 0, 40% at 10, 5% at 20)
> > > > with occasional spikes around 100ms.
> > > >
> > > > I am going to up the JMeter load test to allow for 100 simultaneous users just
>to
> > > > try and break it.
> > >
> > > I ran it with 100 simultaneous users--and the longest processing times were still
> > > less than 1.6 seconds (my magic "it takes too long on the server" time).
> > >
> > > I wasn't satisfied, so I went with 200 simultaneous users. My longest processing
> > > time was 3.135 seconds with one Resin Server through Apache, on a 750 MHz Athlon
> > > and 256 MB RAM.
> > >
> >
> > I assume this results are for static resource (/welcome?), how about dynamic
>resources?
> > (simple sql or esql)?
>
> I'll let you know in a bit. in the mean time, run some tests of your own and give
>some
> feedback.
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, email: [EMAIL PROTECTED]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, email: [EMAIL PROTECTED]
