On Tue, Jul 17, 2001 at 04:41:07PM +0000, [EMAIL PROTECTED] wrote:
> codasrv 2432/tcp codasrv
> codasrv 2432/udp codasrv
> codasrv-se 2433/tcp codasrv-se
> codasrv-se 2433/udp codasrv-se
> codaauth2 370/tcp codaauth2
> codaauth2 370/udp codaauth2
>
> is on the "/etc/services" of the two machines.
You don't need,
codasrv 2432/tcp
codasrv-se 2432/tcp
codaauth2 370/tcp
And you're missing,
rpc2portmap 369/udp
venus 2430/tcp
venus 2430/udp
venus-se 2432/udp
But all of that shouldn't matter much because we have hardcoded most of
these IANA assigned portnumbers in case the getservbyname lookup fails.
It was a far too common reason for problems.
> Portmap is running on the two machines. The server runs:
>
> portmap
We don't use the ONC/SUNRPC portmapper, different protocol.
> auth2
> rpc2portmap
> updatesrv -p /vice/db
This is most likely wrong, the updatesrv should work fine when it is
started without any options, or with '-p /vice'. Now the updateclnt is
monitoring changes to non-existing files like '/vice/db/db/files'
instead of the existing '/vice/db/files'. But all of this should not be
important if you have a single-client, single-server setup.
> And the client runs:
>
> portmap
Again, we don't rely on a ONC/SUNRPC portmap daemon.
...
> 15:26:16 GetRootVolume: can't get root volume name!
>
> each 30 seconds.
>
> The server does perceive nothing on his logs, what should mean that it is
> not connecting client and server in any way. The two see between them with
> ping, telnet and ftp.
Ok, that would be the first RPC2 call that the client makes. What is
configured as 'rootservers' in /etc/coda/venus.conf? It should be,
rootservers="server", but it probably is configured to try and connect
to our testserver here at CMU.
On the other hand, when vice-setup is done with the 'static' server
configuration, there are no volumes created automatically. vice-setup
gives list of commands that will 'finalize' the setup.
- create your root volume: createvol_rep <rootvolume> E0000100 [<partition>]
- setup a client: venus-setup <servername> 20000
- start venus: venus
- enjoy Coda.
- for more information see http://www.coda.cs.cmu.edu.
So perhaps you are just missing this one final step on the server,
createvol_rep `cat /vice/db/ROOTVOLUME` E0000100
Jan
