I'm planning to install a server farm of coda servers (5.3.19) here for various purpose.
Actually i have 3 servers with 1,8T of Raid 5 each one.
I would use a configuration like that.
SCM
/dev/sda1 20Gb /
/dev/sda3 2Gb /vice
/dev/sda4 500M RVM LOG Partition
/dev/sda5 60Gb RVM Metadata
/dev/sda6 1,6T /vicepa
Other 2 servers are similar that..
Now... my questions are:
1) The RVM LOG partition is too big or not ? howto say don't use more then 30M ?!?! But i have 1,6T of possible datas.
2) The RVM Metadata partition should be 4% of the Storage Area so about 60G but howto say don't use more then 315M
3) After installing the libraries and all for coda i started what it say
Congratulations: your configuration is ready...and now
to get going do the following:
- start the auth2 server as: auth2
- start rpc2portmap as: rpc2portmap
- start updatesrv as: updatesrv
- start updateclnt as: updateclnt -h tva-coda-3
- start the fileserver: startserver &
- wait until the server is up: tail -f /vice/srv/SrvLog
- create your root volume: createvol_rep coda:root E0000100 /vicepa
- setup a client: venus-setup tva-coda-3 20000
- start venus: venus
- enjoy Coda.
- for more information see http://www.coda.cs.cmu.edu.
The venus client is not more into coda ? why i don't find it anymore ?
Thanks for any reply,
I'll be active soon on that maling list reporting lot of information..
Simone Sestini [ SS971-RIPE ]
Plug IT s.p.a. - Technical Office
Via Galileo Ferraris 216
52100 Arezzo
Titles:
System and Network Administrator
Data Transmission Manager
Fax
Web
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
