> On 14 Jan, 2019, at 12:54 pm, Rodrigo Alvarez Dominguez <[email protected]>
> wrote:
>
> I would like to know if it is possible to have the following configuration
> where there is a rate limit and codel algorithm configured over the same
> interface
>
> tc qdisc add dev r1-eth0 root handle 1: htb
> tc class add dev r1-eth0 parent 1: classid 1:1 htb rate 10000kbit burst 15kbit
> tc qdisc add dev r1-eth0 parent 1:1 handle 10: fq_codel limit 1000 target
> 5000 interval 10000 noecn
> tc filter add dev r1-eth0 protocol ip prio 1 u32 match ip dst 0.0.0.0/0
> flowid 1:1
Yes, this is an extensively tested configuration. Have you tried it?
You could also just use Cake, which does all the above, better, with only one
tc invocation:
tc qdisc replace dev r1-eth0 root handle 1: cake bandwidth 10000kbit
besteffort flows
- Jonathan Morton
_______________________________________________
Codel mailing list
[email protected]
https://lists.bufferbloat.net/listinfo/codel
