Yes the HDMI screen is connected to the pandaboard, I only see the penguin at the top left of the screen. I have a 16Go usb fash disk and for the SD Card it's ok because I was able to launch a single android.
-----Message d'origine----- De : Amit Mahajan [mailto:amit.maha...@b-labs.com] Envoyé : vendredi 30 septembre 2011 16:17 À : Julien SIMONE Cc : codezero-devel@lists.l4dev.org Objet : Re: [codezero-devel] Demo android-linux-mmc-usb > > I tried to launch the android_linux-mmc-usb simulation on a pandaboard > but it seems that the android container doesn't want to run.. > > My configuration: > > - On my sd card: 2 partitions: 1 for the MLO, U-Boot.bin, final.elf > (FAT) and 1 for the linux rootfs (EXT3) > > - On my USB flash disk: android rootfs (EXT3) > > > > The linux partition is well-launched but for android one nothing > happens... > Hi Julien, Have you connected the HDMI screen to panda board? Do you see anything there? Android is having the control of HDMI, if you can share some more details then will be great. -- Regards, Amit Mahajan _______________________________________________ codezero-devel mailing list codezero-devel@lists.l4dev.org http://lists.l4dev.org/mailman/listinfo/codezero-devel_lists.l4dev.org
