Hi Dawid,
I already had connected the PandaBoard to my Ubuntu and tracked the
outputs via Serial-To-USB on minicom.
I know the "su" command, and so had tried to get root access this way,
but unfortunately it didn't work for me either.
Thank you for the link. The idea of hacking the init.rc script sounds
very interesting. I'll definitely give it a try.
Sebastian
Am 19.09.2012 17:30, schrieb [email protected]:
On Wed, Sep 19, 2012 at 5:17 PM, [email protected]
<[email protected]> wrote:
thank you for your quick response.
Is it possible to activate Ethernet in prebuilt Codezero Android for
PandaBoard?
I tried, but in Android itself I did not find any option.
When I try to switch it on via Android terminal, e.g. as eth0, Android tells
me, it is not possible. I think this happens due to not gaining root access.
I have no way to test this ATM, but I think the ethernet was
DHCP-enabled in the demo.
If it's not, you must hack Android init script for this to work or
issue the neccessary commands yourself:
http://ask.linaro.org/questions/508/how-to-configure-ethernet-on-linaro-landing-for-pandaboard/522
If anything requires root access, you should use "su" command.
Also, in case of reporting any issues, please paste the exact output
that you're getting on the console. A advise using serial cable to
Panda's outputs and shell.
Regards,
_______________________________________________
codezero-devel mailing list
[email protected]
http://lists.l4dev.org/mailman/listinfo/codezero-devel_lists.l4dev.org
