me again.. I've now collectd working with rrdcached.. BUT, (always there's a BUT), graphs delay almost 8 min to show... My collectd clients send info in 30 sec... any ideas?
regards Israel. On Thu, May 27, 2010 at 11:53 AM, Israel Garcia <[email protected]> wrote: > well, I found errors con collectd and daemon starts, but rrdcached > can'nt connect to unix socket: See below: > > rrdcached plugin: rrdc_connect (unix:/var/tmp/rrdcached.sock) failed > with status 2. > > my new collectd.conf: > > LoadPlugin network > FQDNLookup true > Interval 60 > > TypesDB "/opt/collectd/share/collectd/types.db" > TypesDB "/opt/collectd/etc/types.db.custom" > > <Plugin network> > Server "xx.xx.xx.xx" "25826" > Listen "xx.xx.xx.xx" "25826" > </Plugin> > > LoadPlugin cpu > LoadPlugin df > LoadPlugin disk > LoadPlugin interface > LoadPlugin load > LoadPlugin memory > LoadPlugin swap > > <Plugin "interface"> > Interface "lo" > Interface "sit0" > IgnoreSelected true > </Plugin> > > <Plugin "df"> > MountPoint "/lib/init/rw" > MountPoint "/dev/shm" > MountPoint "/dev" > IgnoreSelected true > </Plugin> > > #LoadPlugin rrdtool > > #<Plugin rrdtool> > # DataDir "/var/lib/collectd/rrd" > # CacheFlush 7200 > # CacheTimeout 256 > # StoreRates false > #</Plugin> > > LoadPlugin rrdcached > > <Plugin "rrdcached"> > DaemonAddress "unix:/var/tmp/rrdcached.sock" > DataDir "/var/lib/collectd/rrd" > # CreateFiles true > </Plugin> > > LoadPlugin "syslog" > <Plugin "syslog"> > LogLevel "debug" > </Plugin> > > Now ??? :-( > > regards > Israel. > > On Thu, May 27, 2010 at 11:26 AM, Israel Garcia <[email protected]> wrote: >> Hi, I want to start using rrdcached instead rrdtool plugin. My setup: >> >> - Debian lenny >> >> - collectd 4.10 compile from source >> collectd 4.10.0, http://collectd.org/ >> by Florian octo Forster <[email protected]> >> for contributions see `AUTHORS' >> >> >> - rrdtool package installed from lenny-backports >> # dpkg -l |grep rrdtool >> ii rrdtool 1.4.3-1~bpo50+1 >> time-series data storage and display system >> # dpkg -l |grep librrd >> ii librrd-dev 1.4.3-1~bpo50+1 >> time-series data storage and display system >> ii librrd4 1.4.3-1~bpo50+1 >> time-series data storage and display system >> ii librrds-perl 1.3.1-4 >> Time-series data storage and display system >> >> - collectd.conf >> LoadPlugin network >> FQDNLookup true >> Interval 60 >> >> TypesDB "/opt/collectd/share/collectd/types.db" >> TypesDB "/opt/collectd/etc/types.db.custom" >> >> <Plugin network> >> Server "xx.xx.xx.xx" "25826" >> Listen "xx.xx.xx.xx" "25826" >> </Plugin> >> >> LoadPlugin cpu >> LoadPlugin df >> LoadPlugin disk >> LoadPlugin interface >> LoadPlugin load >> LoadPlugin memory >> LoadPlugin swap >> >> <Plugin "interface"> >> Interface "lo" >> Interface "sit0" >> IgnoreSelected true >> </Plugin> >> >> <Plugin "df"> >> MountPoint "/lib/init/rw" >> MountPoint "/dev/shm" >> MountPoint "/dev" >> IgnoreSelected true >> </Plugin> >> >> LoadPlugin rrdtool >> >> #<Plugin rrdtool> >> # DataDir "/var/lib/collectd/rrd" >> # CacheFlush 7200 >> # CacheTimeout 256 >> # StoreRates false >> #</Plugin> >> >> <Plugin "rrdcached"> >> DaemonAddress "unix:/var/tmp/rrdcached.sock" >> DataDir "/var/lib/collectd/rrd" >> CreateFiles true >> </Plugin> >> >> LoadPlugin "syslog" >> <Plugin "syslog"> >> LogLevel "debug" >> </Plugin> >> >> >> When I start collectd I see this: >> >> Starting statistics collection and monitoring daemon: collectdtype = network >> file = /opt/collectd/lib/collectd/network.so >> option = FQDNLookup; value = true; >> option = Interval; value = 60.000000; >> Done parsing `/opt/collectd/share/collectd/types.db' >> Done parsing `/opt/collectd/etc/types.db.custom' >> network plugin: sockent_open: node = xx.xx.xx.xx; service = 25826; >> network plugin: network_set_ttl: network_config_ttl = 0; >> network plugin: network_set_interface: interface index = 0; >> network plugin: sockent_open: node = xx.xx.xx.xx; service = 25826; >> fd = 4; calling `bind' >> type = cpu >> file = /opt/collectd/lib/collectd/cpu.so >> type = df >> file = /opt/collectd/lib/collectd/df.so >> type = disk >> file = /opt/collectd/lib/collectd/disk.so >> type = interface >> file = /opt/collectd/lib/collectd/interface.so >> type = load >> file = /opt/collectd/lib/collectd/load.so >> type = memory >> file = /opt/collectd/lib/collectd/memory.so >> type = swap >> file = /opt/collectd/lib/collectd/swap.so >> type = interface, key = Interface, value = lo >> to add entry: lo >> cf_dispatch: return (0) >> type = interface, key = Interface, value = sit0 >> to add entry: sit0 >> cf_dispatch: return (0) >> type = interface, key = IgnoreSelected, value = true >> cf_dispatch: return (0) >> type = df, key = MountPoint, value = /lib/init/rw >> to add entry: /lib/init/rw >> cf_dispatch: return (0) >> type = df, key = MountPoint, value = /dev/shm >> to add entry: /dev/shm >> cf_dispatch: return (0) >> type = df, key = MountPoint, value = /dev >> to add entry: /dev >> cf_dispatch: return (0) >> type = df, key = IgnoreSelected, value = true >> cf_dispatch: return (0) >> type = rrdtool >> file = /opt/collectd/lib/collectd/rrdtool.so >> type = rrdcached, key = DaemonAddress, value = unix:/var/tmp/rrdcached.sock >> Found a configuration for the `rrdcached' plugin, but the plugin isn't >> loaded or didn't register a configuration callback. >> type = rrdcached, key = DataDir, value = /var/lib/collectd/rrd >> Found a configuration for the `rrdcached' plugin, but the plugin isn't >> loaded or didn't register a configuration callback. >> type = rrdcached, key = CreateFiles, value = true >> Found a configuration for the `rrdcached' plugin, but the plugin isn't >> loaded or didn't register a configuration callback. >> type = syslog >> file = /opt/collectd/lib/collectd/syslog.so >> >> >> What is it? Can you help me? >> >> -- >> Regards; >> Israel Garcia >> > > > > -- > Regards; > Israel Garcia > -- Regards; Israel Garcia _______________________________________________ collectd mailing list [email protected] http://mailman.verplant.org/listinfo/collectd
