Hi All, I want my v5 client compatible with both v4 and v5 servers.
Reading the doc: >MaxPacketSize 1024-65535 >Set the maximum size for datagrams received over the network. Packets larger >than this will be truncated. Defaults to 1452 bytes, which is the maximum >payload size that can be >transmitted in one Ethernet frame using IPv6 / UDP. > >On the server side, this limit should be set to the largest value used on any >client. Likewise, the value on the client must not be larger than the value on >the server, or data will >be lost. > >Compatibility: Versions prior to version 4.8 used a fixed sized buffer of 1024 >bytes. Versions 4.8, 4.9 and 4.10 used a default value of 1024 bytes to avoid >problems when sending >data to an older server. It is not clear if MaxPacketSize affects also the client mode for datagrams sent. If i put MaxPacketSize 1024 on my v5 client, do i have the warranty that my client will be compatible with both v4 and v5 servers? R, Emeric _______________________________________________ collectd mailing list [email protected] https://mailman.verplant.org/listinfo/collectd
