hey chris - great to hear from you and I hope things are going well for
you...
as for the data types, they are indeed KBytes/sec and this IS saying you
are breaking the laws of physics so congratulations.
seriously though, I'm always saying collectl is pretty stupid and simply
reports what the kernel tells it to. therefore I'd be willing to bet
ethtool lying or perhaps more realistically the drive it lying to ethtool
about what speed it negotiated with the other end?!?
the easiest way to verify all this is to look at /proc/dev/net before and
after the test OR do an ethtool -S before/after. Other than that I'm
afraid I can't offer much more.
-mark
On Wed, Oct 17, 2012 at 12:18 PM, Christopher Maestas
<[email protected]>wrote:
> Apologies for the formatting, but I have nodes on a 100Mb link and am
> trying to understand the actual reading here. If it's in Kbits, then it
> could make sense, but in KBytes, I don't see how 100Mb can do more than 12
> MB/s.
>
> #<----------Disks-----------> <----------Network---------->
>
> #KBRead Reads KBWrit Writes KBIn PktIn KBOut PktOut
> 0 0 11448 90 21821 14098 575 6850
>
>
>
> This is on a FC17 system with the latest kernel update as of yesterday.
>
> $ rpm -q collectl
> collectl-3.6.3-2.noarch
>
> uname -r
> 3.6.1-1.fc17.x86_64
>
> $ ethtool p1p1
> Settings for p1p1:
> Supported ports: [ TP MII ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Supported pause frame use: No
> Supports auto-negotiation: Yes
> Advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> Advertised pause frame use: Symmetric Receive-only
> Advertised auto-negotiation: Yes
> Link partner advertised link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> Link partner advertised pause frame use: Symmetric
> Link partner advertised auto-negotiation: Yes
> Speed: 100Mb/s
> Duplex: Full
> Port: MII
> PHYAD: 0
> Transceiver: internal
> Auto-negotiation: on
> Cannot get wake-on-lan settings: Operation not permitted
> Current message level: 0x00000033 (51)
> drv probe ifdown ifup
>
>
>
> ------------------------------------------------------------------------------
> Everyone hates slow websites. So do we.
> Make your web apps faster with AppDynamics
> Download AppDynamics Lite for free today:
> http://p.sf.net/sfu/appdyn_sfd2d_oct
> _______________________________________________
> Collectl-interest mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/collectl-interest
>
>
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct
_______________________________________________
Collectl-interest mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/collectl-interest
