Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package mpg123 for openSUSE:Factory checked in at 2025-07-30 11:40:55 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/mpg123 (Old) and /work/SRC/openSUSE:Factory/.mpg123.new.13279 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "mpg123" Wed Jul 30 11:40:55 2025 rev:46 rq:1295977 version:1.33.1 Changes: -------- --- /work/SRC/openSUSE:Factory/mpg123/mpg123.changes 2025-06-10 08:56:42.530145187 +0200 +++ /work/SRC/openSUSE:Factory/.mpg123.new.13279/mpg123.changes 2025-07-30 11:40:58.047761693 +0200 @@ -1,0 +2,16 @@ +Sun Jul 27 18:59:58 UTC 2025 - Luigi Baldoni <[email protected]> + +- Update to version 1.33.1 + * Finally formatted README. Maybe do it in Markdown sometime, + as that's the fashion. + build: + * The ports/cmake only installs manpages for BUILD_PROGRAMS now. + * The configure gives better hint if pkg-config was missing + during generation + mpg123: + * Replace usage of signal() in terminal code with our + sigaction() wrapper to fix repeated handling for --sigusr1 + and --sigusr2, which got subtly broken on Linux + glibc by a + feature test macro change in mpg123 1.31. + +------------------------------------------------------------------- Old: ---- mpg123-1.33.0.tar.bz2 mpg123-1.33.0.tar.bz2.sig New: ---- mpg123-1.33.1.tar.bz2 mpg123-1.33.1.tar.bz2.sig ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ mpg123.spec ++++++ --- /var/tmp/diff_new_pack.kEiOvv/_old 2025-07-30 11:41:00.719872151 +0200 +++ /var/tmp/diff_new_pack.kEiOvv/_new 2025-07-30 11:41:00.735872813 +0200 @@ -18,7 +18,7 @@ %define sover 0 Name: mpg123 -Version: 1.33.0 +Version: 1.33.1 Release: 0 Summary: Console MPEG audio player and decoder library License: LGPL-2.1-only ++++++ mpg123-1.33.0.tar.bz2 -> mpg123-1.33.1.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/AUTHORS new/mpg123-1.33.1/AUTHORS --- old/mpg123-1.33.0/AUTHORS 2025-06-07 17:57:49.000000000 +0200 +++ new/mpg123-1.33.1/AUTHORS 2025-07-27 20:04:28.000000000 +0200 @@ -14,9 +14,11 @@ Current maintainers with various sorts of contributions: Thomas Orgis <[email protected]> + Taihei Momma <[email protected]> + +Past maintainers mainly for MS Windows platform: Patrick Dehne <[email protected]> Jonathan Yong <[email protected]> - Taihei Momma <[email protected]> Co-initiator of the revived mpg123 project, but not that involved anymore: Nicholas J Humfrey <[email protected]> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/INSTALL new/mpg123-1.33.1/INSTALL --- old/mpg123-1.33.0/INSTALL 2025-06-07 17:57:49.000000000 +0200 +++ new/mpg123-1.33.1/INSTALL 2025-07-27 20:04:28.000000000 +0200 @@ -7,20 +7,22 @@ - a C99 compiler (moderate C99 support) -- an (UNIX-like) operating system with standard tools; MinGW32 and +- an (UNIX-like) operating system with standard tools; mingw-w64 and Cygwin are working for Microsoft Windows, too. We also have users happily - on OS/2. + playing on OS/2. - For the library only, you may get lucky with MSVC++ using CMake and - ports/cmake as source directory. You can also use CMake on other + ports/cmake as source directory. You can also use CMake on UNIX-like platforms for a full build, but its main purpose is for portability where autotools don't do the trick. -- For other exotic platforms, also see ports/ +- There used to be some additional ports in ports/, now there is a single + CMake structure there that handles most systems that cannot use autotools + to at least build the decoder library. - If building from direct source code repository checkout, as opposed to a release or snapshot tarball, you need GNU autotools installed - (see Developer Build below). + (see Developer Build below) or have cmake present for ports/cmake/. You want: @@ -158,38 +160,57 @@ You can then find the library itself under src/lib*123/.libs (libtool likes to hide things there). +Alternatively, you can use --disable-components and --enable-foo for +building only component foo (like libmpg123). + 4. Exotic platforms -See the ports/ directory for some help for building at least libmpg123 -without the UNIX shell / autotools. The main strategy is to write -a config.h to replace what configure would generate and then have a -correct listing of all source files involved in that configuration -(there are optional files for different decoder choices, for example). - -Then compile objects, link. - -Instead of manually curated MSVC project files, there is a CMake port -now in ports/cmake to build mpg123 with the MS compilers. It might be -helpful for other platforms, too. But the main build system for -POSIX-like systems is the autotools one. - - -4a. Preparing Win32 binary packages. - -Caution: You should make sure to use some gcc >= 4.2.0, even if it's -still the experimental package for MinGW32. -This helps preventing incompatibilities between generated DLL files and -other compilers (it's about stack alignment). - -Get MinGW/MSYS installed, run the MSYS shell. -Enter the mpg123 source directory. -Execute sh ./windows-builds.sh . +There used to be (and still are in revsion control history) special +ports for some platforms or language bindings in the ports/ directory. + +Right now, there is only ports/cmake for an alternate CMake-based +build, mainly for libmpg123 itself, but also libsyn123 and possibly +the full set if the platform is UNIX-like. + +If autotools and also ports/cmake do not do the trick, you need to +construct a src/config.h and build and gather the object files you want. +The autotools input files should help here, too. + +4a. Microsoft Windows + +Under Windows, you can use Cygwin, MSYS2 or probably also the WSL +environment to build mpg123 binaries. If you want binaries that +work nicely stand-alone, and also at least being able to force correct +printout of UTF-8 text using chcp 65001 and mpg123 --utf8, the MSYS2 +UCRT64 shell and accompanying toolchain seem to work (see MSYS2 +documentation on how to set up, it is not that hard). + +To generate a set of binary builds matching the erstwhile official mpg123 +binaries, run + + sh ./windows-builds.sh x86 + +or + + sh ./windows-builds.sh x86_64 + +(optionally followed by a number to indicate the count of parallel make +tasks). After some time, you should have some relevant files under releases/ (or releases\, for Windows people;-). You don't just get one build -- there are several variants, corresponding -to what usually is to be found under http://mpg123.org/download/win32 . +to what usually was to be found under https://mpg123.org/download/win32/ and +https://mpg123.org/download/win64/ . + +Notet hat, depending on you msys/mingw variant, you might have to copy +libwinpthread-1.dll to the respective release directory. This is a quirk +of the toolchain which insists on linking in a threading runtime. You +might be able to statically link it in with some extra magic. + +You can also run this script on a Linux host with mingw-w64 cross toolchain +installed, with arguments x86-cross and x86_64-cross. 5. Note on large file support @@ -206,6 +227,11 @@ In both large-file and normal mode, the library should just work for your app. +In the meantime a portable API with fixed 64 bit integers (and some irony +on top) also was added. You can limit yourself to that api by defining +MPG123_PORTABLE_API in client code. + + 6. Security If you consider installing the mpg123 binary or any program using diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/NEWS new/mpg123-1.33.1/NEWS --- old/mpg123-1.33.0/NEWS 2025-06-07 17:57:48.000000000 +0200 +++ new/mpg123-1.33.1/NEWS 2025-07-27 20:04:28.000000000 +0200 @@ -1,3 +1,17 @@ +1.33.1 +------ +- INSTALL updated with hints for Windows, mainly. +- Finally formatted README. Maybe do it in Markdown sometime, as that's + the fashion. +- build: +-- The ports/cmake only installs manpages for BUILD_PROGRAMS now. +-- The configure gives better hint if pkg-config was missing during generation + (bug 378). +- mpg123: +-- Replace usage of signal() in terminal code with our sigaction() wrapper + to fix repeated handling for --sigusr1 and --sigusr2, which got subtly + broken on Linux + glibc by a feature test macro change in mpg123 1.31. + 1.33.0 ------ - mpg123 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/README new/mpg123-1.33.1/README --- old/mpg123-1.33.0/README 2025-06-07 17:57:49.000000000 +0200 +++ new/mpg123-1.33.1/README 2025-07-27 20:04:28.000000000 +0200 @@ -1,41 +1,56 @@ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * mpg123 - MPEG 1.0/2.0/2.5 audio player * -* README for version 1.x.y, dated at 14.06.2009 * +* README for version 1.x.y, dated at 29.06.2025 * * * * ...still the fastest MPEG audio player for UNIX ;) * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -(This file has very long lines - die-hard terminal nostalgists can be satisfied by `fmt -s -w 75 < README | less`. I think it's better to let the reader's preference rule than to preformat the stuff to some arbitrary width.) - 0. Stuff For building/installation info see INSTALL. -The mpg123 project was started by Michel Hipp and is now being maintained by Thomas Orgis and Nicholas J. Humfrey, who initiated the Sourceforge project. -The source code contains contributions from quite a few people - see AUTHORS for more info. -It is Open Source software licensed mostly under the LGPL with some parts restricted to GPL. See COPYING for details. -As for every mp3 player, some of mpg123's functionality may be covered by patents in a country where these are valid. See PATENTS for details. +The mpg123 project was started by Michel Hipp and is now being maintained +by Thomas Orgis. The source code contains contributions from quite a few +people - see AUTHORS for more info. + +It is Open Source software licensed mostly under the LGPL v2.1, COPYING +for details. Patents on MPEG audio used to be an issue, but around 2017 +the last patents should have expired. I'm no lawyer, that is just my +opinion, of course. Get your own to make sure (opinion or lawyer, whatever +you prefer). Project's official website URL is - http://mpg123.org -(or http://mpg123.orgis.org as fallback address if there is a problem with the DNS forwarding) + https://mpg123.org + +(or https://mpg123.orgis.org as fallback address if there is a problem +with the DNS forwarding) for the traditional home page and - http://sourceforge.net/projects/mpg123 + https://sourceforge.net/projects/mpg123 -for sourceforge.net based services like download mirrors, mailing lists and bug/feature trackers. -Please use the sourceforge download mirrors when possible to minimize load on the mpg123.org server. +for sourceforge.net based services like download mirrors, mailing lists +and bug/feature trackers. 1. Introduction -This is a console based decoder/player for mono/stereo mpeg audio files, probably more familiar as MP3 or MP2 files. -It's focus is speed. We still need some low-end benchmarks for the current version, but playback should be possible even on i486 CPUs. There is hand-optimized assembly code for i586, MMX, 3DNow, SEE and 3DNowExt instructions, while generic code runs on a variety of different platforms and CPUs. -It can play MPEG1.0/2.0/2.5 layer I, II, II (1, 2, 3;-) files (VBR files are fine, too) and produce output on a number of different ways: raw data to stdout and different sound systems depending on your platform (see INSTALL). -Most tested are Linux on x86 and Alpha/AXP and MacOSX on ppc as the environments the current developers work in. -We are always thankful for user reports on success (and failure) on any platform! +This is a console based decoder/player for mono/stereo mpeg audio files, +probably more familiar as MP3 or MP2 files. +It's focus is speed. We still need some low-end benchmarks for the +current version, but playback should be possible even on i486 CPUs. There +is hand-optimized assembly code for i586, MMX, 3DNow, SEE and 3DNowExt +instructions, while generic code runs on a variety of different platforms +and CPUs. +It can play MPEG1.0/2.0/2.5 layer I, II, II (1, 2, 3;-) files (VBR files +are fine, too) and produce output on a number of different ways: raw +data to stdout and different sound systems depending on your platform +(see INSTALL). +Most tested are Linux on x86 and Alpha/AXP and MacOSX on ppc as the +environments the current developers work in. +We are always thankful for user reports on success (and failure) on +any platform! 2. Contact @@ -44,7 +59,7 @@ [email protected] [email protected] -or +or [email protected] long: see doc/CONTACT @@ -56,7 +71,8 @@ 3.1 Simple Console Usage -Mpg123 is a console program - normally it just plays a list of files you specify on command line and that's it. See the included manpage or +Mpg123 is a console program - normally it just plays a list of files +you specify on command line and that's it. See the included manpage or mpg123 --help @@ -64,15 +80,22 @@ mpg123 --longhelp -on command line syntax/options. I encourage you to check out the --gapless and --rva-album/--rva-mix options:-) - -In the simple "mpg123 file1.mp3 file2.mp3" mode, the only thing you can do to interact is to press Ctrl+C to skip to next track or end the whole playback if pressing it twice. +on command line syntax/options. I encourage you to check out the --gapless +and --rva-album/--rva-mix options:-) -Note that this Ctrl+C behaviour is special to this mode; when any of the following is activated, Ctrl+C will just kill the program like you would expect normally (this changed from earlier versions). +In the simple "mpg123 file1.mp3 file2.mp3" mode, the only thing you can +do to interact is to press Ctrl+C to skip to next track or end the whole +playback if pressing it twice. + +Note that this Ctrl+C behaviour is special to this mode; when any of +the following is activated, Ctrl+C will just kill the program like you +would expect normally (this changed from earlier versions). 3.2 Advanced Console Usage -You can specify the option -C to enable a terminal control interface enabling to influence playback on current title/playlist by pressing some key: +You can specify the option -C to enable a terminal control interface +enabling to influence playback on current title/playlist by pressing +some key: -= terminal control keys =- [s] or [ ] interrupt/restart playback (i.e. '(un)pause') [f] next track @@ -98,7 +121,8 @@ [c] or [C] pitch up (small step, big step) [x] or [X] pitch down (small step, big step) [w] reset pitch to zero -[k] print out current position in playlist and track, for the benefit of some external tool to store bookmarks +[k] print out current position in playlist and track, for the benefit +of some external tool to store bookmarks [h] this help [q] quit @@ -106,41 +130,76 @@ Note: This interface needs not to be available on _every_ platform/build. -Another note: The volume up and down is performed by changing the scale factor (like the -f parameter) ... so the audio is scaled digitally in the given range of the output format (usually 16bits). That means the lowering the volume will decrease the dynamic range and possibly lessen the quality while increasing volume can in fact increase the dynamic range and thus make it better, if you deal with a silent source and no clipping is necessary. -It is a good idea to use RVA values stored in the file for adjusting low volume files, though - mpg123 handles that in addition to your volume setting. +Another note: The volume up and down is performed by changing the scale +factor (like the -f parameter) ... so the audio is scaled digitally in +the given range of the output format (usually 16bits). That means the +lowering the volume will decrease the dynamic range and possibly lessen +the quality while increasing volume can in fact increase the dynamic +range and thus make it better, if you deal with a silent source and no +clipping is necessary. +It is a good idea to use RVA values stored in the file for adjusting +low volume files, though - mpg123 handles that in addition to your +volume setting. 3.3 Control Interface for Frontends -There used to be several interfaces for frontends left over from that past, but only one of them remains for the present and future: +There used to be several interfaces for frontends left over from that +past, but only one of them remains for the present and future: The Generic Control Interface -It contains of communication of textual messages via standard input to mpg123 and responses to standard output unless the -s switch for output of audio data on stdout is used - then the responses come via stderr. +It contains of communication of textual messages via standard input to +mpg123 and responses to standard output unless the -s switch for output +of audio data on stdout is used - then the responses come via stderr. See doc/README.remote for usage. 4. Speed -mpg123 is fast. Any faster software player is probably based on some hacked mpg123;-) -MPlayer included mpg123 source code in it's mp3lib and we have to be thankful for the MPlayer folks adding SSE, 3DNowExt and AltiVec optimizations over the years, which we were able to backport. +mpg123 is fast. Any faster software player is probably based on some +hacked mpg123;-) +MPlayer included mpg123 source code in it's mp3lib and we have to +be thankful for the MPlayer folks adding SSE, 3DNowExt and AltiVec +optimizations over the years, which we were able to backport. + +mpg123 includes the AltiVec optimization since version 0.61 and the SSE +and 3DNowExt optimizations since 0.66 . +Also, version 0.66 adds the merged x86 optimization build, which includes +every applicable optimization for x86 cpus except the one for i486, +wich is a bit special. + +Now mpg123 catched up with MPlayer's mp3lib concerning decoding speed +on my Pentium M (which supports SSE): +Decoding a certain album (Queensryche's Rage for Order) to /dev/null took +22.4s user time with mpg123-0.66 compared to 24.7s with MPlayer-1.0rc1 . + +Also, beginning with mpg123 1.8.0, there are fresh x86-64 SSE +optimizations (provided by Taihei Monma) which make mpg123 the fastest +MPEG audio decoder in my knowledge also on current 64bit x86 systems. +Manual optimizations continued with AVX probably being the last vector +instruction set that makes sense to implement the decoder for. + +In 2025, a Core i7-10710U CPU needs 5.97 s for Queensryche's Rage for +Order with the AVX decoder, 6.01 s with x86-64 (SSE) and 9.05 s with +generic C code from the Ubuntu 22.04 build of mpg123 1.29.3. -mpg123 includes the AltiVec optimization since version 0.61 and the SSE and 3DNowExt optimizations since 0.66 . -Also, version 0.66 adds the merged x86 optimization build, which includes every applicable optimization for x86 cpus except the one for i486, wich is a bit special. - -Now mpg123 catched up with MPlayer's mp3lib concerning decoding speed on my Pentium M (which supports SSE): -Decoding a certain album (Queensryche's Rage for Order) to /dev/null took 22.4s user time with mpg123-0.66 compared to 24.7s with MPlayer-1.0rc1 . - -Also, beginning with mpg123 1.8.0, there are fresh x86-64 SSE optimizations (provided by Taihei Monma) which make mpg123 the fastest MPEG audio decoder in my knowledge also on current 64bit x86 systems. 5. Accuracy -The mpg123 engine is able to decode in full compliance to ISO/IEC 11172-3, for all three layers, using floating point or integer math (the latter since 1.8.1). -Accuracy of 16bit output depends on specific optimization in use and compile-time choice about the rounding mode (which is performance relevant). - -The ISO test suite is incorporated in the mpg123 subversion repository under svn://orgis.org/mpg123/test, nightly tests of a build (with high-quality 16bit rounding) are published on the mpg123 website. +The mpg123 engine is able to decode in full compliance to ISO/IEC 11172-3, +for all three layers, using floating point or integer math (the latter +since 1.8.1). +Accuracy of 16bit output depends on specific optimization in use and +compile-time choice about the rounding mode (which is performance +relevant). + +The ISO test suite is incorporated in the mpg123 subversion repository +under svn://orgis.org/mpg123/test, nightly tests of a build (with +high-quality 16bit rounding) are published on the mpg123 website. -Dithered 16bit output is available as an option (the --cpu choices ending with _dither). See +Dithered 16bit output is available as an option (the --cpu choices ending +with _dither). See http://dither123.dyndns.org @@ -148,57 +207,103 @@ 6. History -A looooong time ago (mid-90s), Michael Hipp wrote some initial mpg123 and made it _the_ Unix console mp3 player in the following years. -The exact date of birth is fuzzy in human memory, but according to the master himself (Michael) mpg123 started in 1994 as an MP2 player which a year later, 1995, gained MP3 ability. -The core decoder files have mostly 1995 as their birth year listed, so one can say that mpg123 as the layer1,2,3 player was born in 1995. -In any case, that is a looooong time ago for a media player - especially for one that is still alive! +A looooong time ago (mid-90s), Michael Hipp wrote some initial mpg123 +and made it _the_ Unix console mp3 player in the following years. +The exact date of birth is fuzzy in human memory, but according to the +master himself (Michael) mpg123 started in 1994 as an MP2 player which +a year later, 1995, gained MP3 ability. +The core decoder files have mostly 1995 as their birth year listed, +so one can say that mpg123 as the layer1,2,3 player was born in 1995. +In any case, that is a looooong time ago for a media player - especially +for one that is still alive! This is the historic description: - This isn't a new player. It's a fully rewritten version originally based + This isn't a new player. It's a fully rewritten version originally + based on the mpegaudio (FHG-version) package. The DCT algorithm in the - synthesis filter is a rewritten version of the DCT first seen in the maplay - package, which was written by Tobias Bading ([email protected]). The - rewrite was necessary, because the GPL may not allow this copyright mix. - The mpegaudio package was written by various people from the MPEG/audio - software simulation group. The maplay is under GPL .. You can find the - original source code and the mpegaudio package on: ftp.tnt.uni-hannover.de. + synthesis filter is a rewritten version of the DCT first seen + in the maplay + package, which was written by Tobias Bading + ([email protected]). The + rewrite was necessary, because the GPL may not allow this + copyright mix. + The mpegaudio package was written by various people from the + MPEG/audio + software simulation group. The maplay is under GPL .. You can + find the + original source code and the mpegaudio package on: + ftp.tnt.uni-hannover.de. - Especially layer3.c common.c and mpg123.h is based on the dist10 package. + Especially layer3.c common.c and mpg123.h is based on the + dist10 package. The code is fully rewritten but I'm using sometimes the same variable names or similar function names as in the original package. - In the current layer3.c I'm using a DCT36 first seen in Jeff Tsay's + In the current layer3.c I'm using a DCT36 first seen in Jeff + Tsay's ([email protected]) maplay 1.2+ package. His code is under GPL .. I also tried the enhancement from Mikko Tommila. His code is also in layer3.c (but it's disabled at the moment, because - it was slightly slower than the unrolled 9 point DCT (at least on - _my_ system)). Theoretically it should be faster. You may try it on + it was slightly slower than the unrolled 9 point DCT (at least on + _my_ system)). Theoretically it should be faster. You may try + it on your system. Well, that's how it started... -Official development ceased due to the typical lack-of-time syndrome around 2002 and the free-floating patches began to seize the day. +Official development ceased due to the typical lack-of-time syndrome +around 2002 and the free-floating patches began to seize the day. -But before that, Michael wrote or rewrote the essential code; others contributed their bits. +But before that, Michael wrote or rewrote the essential code; others +contributed their bits. The main message is: -Code is copyrighted by Michael Hipp, who made it free software under the terms of the LGPL 2.1. +Code is copyrighted by Michael Hipp, who made it free software under +the terms of the LGPL 2.1. -Please see doc/ROAD_TO_LGPL, COPYING and AUTHORS for details on that. Note that the only notable legacy non-LGPL file was the old alsa output that didn't work with alsa 0.9/1.0 anymore. -Also, there has been a libao output in the betas 0.60 for a short period. Libao being generally problematic for us because of its GPL license, this output is not distributed anymore in the release packages. There is now a new, LGPLed alsa output that made both the old alsa and libao obsolete for our purposes. -So, the distributed mpg123 releases actually only contain LGPL code, but you get the other files from our subversion repository if you checkout the trunk / version tags. - -There has been quite some confusion about the licensing and "freeness" of mpg123 in the past. -The initial "free for private use, ask me when you want to do something commercial" license caused some people to avoid mpg123 and even to write a replacement mimicking the interface but using a different decoding engine - what was not actively developed for too long but entered the "free" software sections. - -The Debian (non-free section) and Gentoo distributions cared about the last stable and the last development release of mpg123 over the years with mainly applying security fixes. Thanks go to the distribution maintainers for not letting it alone to bitrot over the years. - -Thomas Orgis started to hack on mpg123 in 2004 while working on his personal audio experience with mixplayd and later DerMixD, utilizing the generic control interface. In Feb 2005, he crammed control interface improvements together with Debian's r19 fixes and released the personal fork/patch named mpg123-thor. -Little later that year, Nicholas J. Humphrey independently created the sourceforge project and released an autotooled 0.59r under official GPL flag with Debian and MacOSX fixes. -In the beginning of 2006, Thomas finally decided that he could work "officially" on mpg123 and contacted Michael Hipp for taking over maintainership. -Michael was all-positive about letting mpg123 really live again (and perhaps see version 1.0 some time;-) and also pointed at the sourceforge project that didn't see much activity since the initial release. -A lot of emails and some weeks later there was the two-developer team of Nicholas and Thomas working on merging their mpg123 variants as well as adding some features and fixes to let it shine again. +Please see doc/ROAD_TO_LGPL, COPYING and AUTHORS for details on that. Note +that the only notable legacy non-LGPL file was the old alsa output that +didn't work with alsa 0.9/1.0 anymore. +Also, there has been a libao output in the betas 0.60 for a short +period. Libao being generally problematic for us because of its +GPL license, this output is not distributed anymore in the release +packages. There is now a new, LGPLed alsa output that made both the old +alsa and libao obsolete for our purposes. +So, the distributed mpg123 releases actually only contain LGPL code, but +you get the other files from our subversion repository if you checkout +the trunk / version tags. + +There has been quite some confusion about the licensing and "freeness" +of mpg123 in the past. +The initial "free for private use, ask me when you want to do something +commercial" license caused some people to avoid mpg123 and even to write +a replacement mimicking the interface but using a different decoding +engine - what was not actively developed for too long but entered the +"free" software sections. + +The Debian (non-free section) and Gentoo distributions cared about the +last stable and the last development release of mpg123 over the years +with mainly applying security fixes. Thanks go to the distribution +maintainers for not letting it alone to bitrot over the years. + +Thomas Orgis started to hack on mpg123 in 2004 while working on his +personal audio experience with mixplayd and later DerMixD, utilizing +the generic control interface. In Feb 2005, he crammed control interface +improvements together with Debian's r19 fixes and released the personal +fork/patch named mpg123-thor. +Little later that year, Nicholas J. Humphrey independently created the +sourceforge project and released an autotooled 0.59r under official GPL +flag with Debian and MacOSX fixes. +In the beginning of 2006, Thomas finally decided that he could work +"officially" on mpg123 and contacted Michael Hipp for taking over +maintainership. +Michael was all-positive about letting mpg123 really live again (and +perhaps see version 1.0 some time;-) and also pointed at the sourceforge +project that didn't see much activity since the initial release. +A lot of emails and some weeks later there was the two-developer team +of Nicholas and Thomas working on merging their mpg123 variants as well +as adding some features and fixes to let it shine again. And there we are now... diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/configure new/mpg123-1.33.1/configure --- old/mpg123-1.33.0/configure 2025-06-07 17:58:29.000000000 +0200 +++ new/mpg123-1.33.1/configure 2025-07-27 20:05:17.000000000 +0200 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.71 for mpg123 1.33.0. +# Generated by GNU Autoconf 2.71 for mpg123 1.33.1. # # Report bugs to <[email protected]>. # @@ -621,8 +621,8 @@ # Identity of this package. PACKAGE_NAME='mpg123' PACKAGE_TARNAME='mpg123' -PACKAGE_VERSION='1.33.0' -PACKAGE_STRING='mpg123 1.33.0' +PACKAGE_VERSION='1.33.1' +PACKAGE_STRING='mpg123 1.33.1' PACKAGE_BUGREPORT='[email protected]' PACKAGE_URL='' @@ -858,9 +858,6 @@ PULSE_CFLAGS JACK_LIBS JACK_CFLAGS -PKG_CONFIG_LIBDIR -PKG_CONFIG_PATH -PKG_CONFIG HAVE_ARM_FALSE HAVE_ARM_TRUE HAVE_GETCPUFLAGS_ARM_FALSE @@ -1012,6 +1009,9 @@ LDFLAGS CFLAGS CC +PKG_CONFIG_LIBDIR +PKG_CONFIG_PATH +PKG_CONFIG AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V @@ -1157,6 +1157,9 @@ ac_precious_vars='build_alias host_alias target_alias +PKG_CONFIG +PKG_CONFIG_PATH +PKG_CONFIG_LIBDIR CC CFLAGS LDFLAGS @@ -1166,9 +1169,6 @@ CCASFLAGS CPP LT_SYS_LIBRARY_PATH -PKG_CONFIG -PKG_CONFIG_PATH -PKG_CONFIG_LIBDIR JACK_CFLAGS JACK_LIBS PULSE_CFLAGS @@ -1727,7 +1727,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures mpg123 1.33.0 to adapt to many kinds of systems. +\`configure' configures mpg123 1.33.1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1798,7 +1798,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of mpg123 1.33.0:";; + short | recursive ) echo "Configuration of mpg123 1.33.1:";; esac cat <<\_ACEOF @@ -1980,6 +1980,11 @@ default, but can be used for HTTP, too. Some influential environment variables: + PKG_CONFIG path to pkg-config utility + PKG_CONFIG_PATH + directories to add to pkg-config's search path + PKG_CONFIG_LIBDIR + path overriding pkg-config's built-in search path CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a @@ -1992,11 +1997,6 @@ CPP C preprocessor LT_SYS_LIBRARY_PATH User-defined run-time library search path. - PKG_CONFIG path to pkg-config utility - PKG_CONFIG_PATH - directories to add to pkg-config's search path - PKG_CONFIG_LIBDIR - path overriding pkg-config's built-in search path JACK_CFLAGS C compiler flags for JACK, overriding pkg-config JACK_LIBS linker flags for JACK, overriding pkg-config PULSE_CFLAGS @@ -2077,7 +2077,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -mpg123 configure 1.33.0 +mpg123 configure 1.33.1 generated by GNU Autoconf 2.71 Copyright (C) 2021 Free Software Foundation, Inc. @@ -2622,7 +2622,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by mpg123 $as_me 1.33.0, which was +It was created by mpg123 $as_me 1.33.1, which was generated by GNU Autoconf 2.71. Invocation command line was $ $0$ac_configure_args_raw @@ -3992,7 +3992,7 @@ # Define the identity of the package. PACKAGE='mpg123' - VERSION='1.33.0' + VERSION='1.33.1' printf "%s\n" "#define PACKAGE \"$PACKAGE\"" >>confdefs.h @@ -4098,6 +4098,140 @@ ac_config_headers="$ac_config_headers src/config.h" +if test 2 -lt "$(grep "PKG_"CHECK_MODULES "$0"|wc -l)"; then + as_fn_error $? "Pkg-config was absent when generating this configure script. + Re-run autoreconf with pkg-config installed top get a working one." "$LINENO" 5 +fi + + + + + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_path_PKG_CONFIG+y} +then : + printf %s "(cached) " >&6 +else $as_nop + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir$ac_word$ac_exec_ext" + printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +printf "%s\n" "$PKG_CONFIG" >&6; } +else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf "%s\n" "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_path_ac_pt_PKG_CONFIG+y} +then : + printf %s "(cached) " >&6 +else $as_nop + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir$ac_word$ac_exec_ext" + printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +printf "%s\n" "$ac_pt_PKG_CONFIG" >&6; } +else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf "%s\n" "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +printf %s "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf "%s\n" "yes" >&6; } + else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf "%s\n" "no" >&6; } + PKG_CONFIG="" + fi +fi # You get strange symptoms like jack module build failing because the AC_C_CONST failed to detect the working const support. # In that case, the test failed because -Werror, not because no const there... @@ -17723,8 +17857,6 @@ if test "x$ac_cv_header_wincon_h" = "xyes" then : -else $as_nop - printf "%s\n" "#define HAVE_WINCON_H 1" >>confdefs.h fi @@ -18797,137 +18929,6 @@ check_modules="$check_modules dummy" fi - - - - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_path_PKG_CONFIG+y} -then : - printf %s "(cached) " >&6 -else $as_nop - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_path_PKG_CONFIG="$as_dir$ac_word$ac_exec_ext" - printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -printf "%s\n" "$PKG_CONFIG" >&6; } -else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf "%s\n" "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_path_ac_pt_PKG_CONFIG+y} -then : - printf %s "(cached) " >&6 -else $as_nop - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir$ac_word$ac_exec_ext" - printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -printf "%s\n" "$ac_pt_PKG_CONFIG" >&6; } -else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf "%s\n" "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -printf %s "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf "%s\n" "yes" >&6; } - else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf "%s\n" "no" >&6; } - PKG_CONFIG="" - fi -fi - # Now go through the modules to check and do the chores. for m in $check_modules do @@ -22467,7 +22468,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by mpg123 $as_me 1.33.0, which was +This file was extended by mpg123 $as_me 1.33.1, which was generated by GNU Autoconf 2.71. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -22535,7 +22536,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config='$ac_cs_config_escaped' ac_cs_version="\\ -mpg123 config.status 1.33.0 +mpg123 config.status 1.33.1 configured by $0, generated by GNU Autoconf 2.71, with options \\"\$ac_cs_config\\" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/configure.ac new/mpg123-1.33.1/configure.ac --- old/mpg123-1.33.0/configure.ac 2025-06-07 17:57:49.000000000 +0200 +++ new/mpg123-1.33.1/configure.ac 2025-07-27 20:04:28.000000000 +0200 @@ -80,6 +80,13 @@ AM_INIT_AUTOMAKE([subdir-objects]) AC_CONFIG_HEADERS([src/config.h]) +dnl You tell me how quoting this normally would work to avoid expansion! +if test 2 -lt "$(grep "PKG_"CHECK_MODULES "$0"|wc -l)"; then + AC_MSG_ERROR([Pkg-config was absent when generating this configure script. + Re-run autoreconf with pkg-config installed top get a working one.]) +fi +dnl For some reason, this has to be after the check above. +PKG_PROG_PKG_CONFIG([]) # You get strange symptoms like jack module build failing because the AC_C_CONST failed to detect the working const support. # In that case, the test failed because -Werror, not because no const there... @@ -1471,7 +1478,7 @@ void *v = &ReadConsoleInput; ])],[ac_cv_header_wincon_h=yes],[ac_cv_header_wincon_h=no]) AC_MSG_RESULT([$ac_cv_header_wincon_h]) -AS_IF([test "x$ac_cv_header_wincon_h" = "xyes"],[],[AC_DEFINE([HAVE_WINCON_H],[1],[Define to 1 if you have the <wincon.h> header file.])]) +AS_IF([test "x$ac_cv_header_wincon_h" = "xyes"],[AC_DEFINE([HAVE_WINCON_H],[1],[Define to 1 if you have the <wincon.h> header file.])],[]) term_type=none if test "x$ac_cv_sys_posix_termios" = "xyes"; then @@ -1926,8 +1933,6 @@ check_modules="$check_modules dummy" fi -PKG_PROG_PKG_CONFIG([]) - # Now go through the modules to check and do the chores. for m in $check_modules do diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/mpg123.spec new/mpg123-1.33.1/mpg123.spec --- old/mpg123-1.33.0/mpg123.spec 2025-06-07 17:59:14.000000000 +0200 +++ new/mpg123-1.33.1/mpg123.spec 2025-07-27 20:05:34.000000000 +0200 @@ -3,7 +3,7 @@ # - devel packages for alsa, sdl, etc... to build the respective output modules. Summary: The fast console mpeg audio decoder/player. Name: mpg123 -Version: 1.33.0 +Version: 1.33.1 Release: 1 URL: http://www.mpg123.org/ License: GPL diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/ports/cmake/CMakeLists.txt new/mpg123-1.33.1/ports/cmake/CMakeLists.txt --- old/mpg123-1.33.0/ports/cmake/CMakeLists.txt 2025-06-07 17:57:49.000000000 +0200 +++ new/mpg123-1.33.1/ports/cmake/CMakeLists.txt 2025-07-27 20:04:28.000000000 +0200 @@ -53,18 +53,8 @@ "${CMAKE_CURRENT_BINARY_DIR}/libsyn123.pc" DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig") if(BUILD_LIBOUT123) -install( - FILES - "${CMAKE_CURRENT_SOURCE_DIR}/../../man1/mpg123.1" - "${CMAKE_CURRENT_SOURCE_DIR}/../../man1/out123.1" - DESTINATION "${CMAKE_INSTALL_MANDIR}") - install( FILES "${CMAKE_CURRENT_BINARY_DIR}/libout123.pc" DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig") - install( - FILES - "${CMAKE_CURRENT_SOURCE_DIR}/../../man1/out123.1" - DESTINATION "${CMAKE_INSTALL_MANDIR}") endif() diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/ports/cmake/src/CMakeLists.txt new/mpg123-1.33.1/ports/cmake/src/CMakeLists.txt --- old/mpg123-1.33.0/ports/cmake/src/CMakeLists.txt 2025-06-07 17:57:49.000000000 +0200 +++ new/mpg123-1.33.1/ports/cmake/src/CMakeLists.txt 2025-07-27 20:04:28.000000000 +0200 @@ -456,7 +456,14 @@ ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}/" LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}/" RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}/") - endif() + + install( + FILES + "${CMAKE_CURRENT_SOURCE_DIR}/../../../man1/mpg123.1" + "${CMAKE_CURRENT_SOURCE_DIR}/../../../man1/out123.1" + DESTINATION "${CMAKE_INSTALL_MANDIR}") + + endif() endif() configure_file(config.cmake.h.in config.h) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/src/term_posix.c new/mpg123-1.33.1/src/term_posix.c --- old/mpg123-1.33.0/src/term_posix.c 2025-06-07 17:57:48.000000000 +0200 +++ new/mpg123-1.33.1/src/term_posix.c 2025-07-27 20:04:28.000000000 +0200 @@ -112,10 +112,10 @@ { mdebug("setup on fd %d", term_fd); - /* One might want to use sigaction instead. */ - signal(SIGCONT, term_sigcont); - signal(SIGUSR1, term_sigusr); - signal(SIGUSR2, term_sigusr); + INT123_catchsignal(SIGCONT, term_sigcont); + INT123_catchsignal(SIGUSR1, term_sigusr); + INT123_catchsignal(SIGUSR2, term_sigusr); + struct termios tio = *pattern; tio.c_lflag &= ~(ICANON|ECHO); tio.c_cc[VMIN] = 1; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/mpg123-1.33.0/src/version.h new/mpg123-1.33.1/src/version.h --- old/mpg123-1.33.0/src/version.h 2025-06-07 17:58:02.000000000 +0200 +++ new/mpg123-1.33.1/src/version.h 2025-07-27 20:04:43.000000000 +0200 @@ -16,7 +16,7 @@ // only single spaces as separator to ease parsing by build scripts #define MPG123_MAJOR 1 #define MPG123_MINOR 33 -#define MPG123_PATCH 0 +#define MPG123_PATCH 1 // Don't get too wild with that to avoid confusing m4. No brackets. // Also, it should fit well into a sane file name for the tarball. #define MPG123_SUFFIX ""
