Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package hamlib for openSUSE:Factory checked in at 2023-04-11 13:51:55 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/hamlib (Old) and /work/SRC/openSUSE:Factory/.hamlib.new.19717 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "hamlib" Tue Apr 11 13:51:55 2023 rev:17 rq:1078383 version:4.5.5 Changes: -------- --- /work/SRC/openSUSE:Factory/hamlib/hamlib.changes 2023-01-14 00:03:03.729656527 +0100 +++ /work/SRC/openSUSE:Factory/.hamlib.new.19717/hamlib.changes 2023-04-11 13:52:03.543673473 +0200 @@ -1,0 +2,43 @@ +Sun Apr 9 08:07:38 UTC 2023 - Wojciech Kazubski <[email protected]> + +- Update to version 4.5.5 (2023-04-05) + * Add park to rotorez.c + * Fix rig power on/off from rigctl cmd line and rigctld + * Enable async mode by default to prevent WSJT-X crash on IC9700 + with transceive on + * Fix IC7610 get_powerstat to disable it -- cannot read power status + * Fix K3 K22 command error for remote operations + * Fix Gemini DX1200 gemini_set_level + * Fix async I/O to not call flush + * Change EX startup commands for Yaesu rigs to allow + errors...Win4Yaesu not recognizing EX commands + * Fix jst145 set_freq and get_freq + * Restore tcflush as some odd behavior was seen that tclush fixes + * Fix XG3 operations + * Separate the validation cmd in newcat.c to allow rig + post_write_delay to be in effect + * Increase post_write to 20ms for FT710 + * Add attenuator level control for TS890 + * Update SMeter/SWR tables for TS890 + * Add fix for TMD700 + * Improve FT-857 get_vfo response when error occurs + * Allow FT-857 to use cached vfo on get_vfo when error + occurs reading EEPROM + * Fix FTDX10 FT710 set_level AF + * Fix FT-450D detection + * Fix VFO A/B swapping for gpredict -- hopefully better + behavior for VFO swapping rigs. Should avoid setting RX freq + while TX and avoid TX freq while RX + * Fix QRP QDX PTT to new TQ command due to firmware changes + * Remove EX103 check for FTDX5000 + * Fix K3/K3S VFOB setting of mode/width + * Fix AGC level display in rigctld + * Change FTDX10 to no serial handshake + * Add TS2000 to has_ps exception + * Add FT991 to 60M exception + * Fix get_powerstat bad call in rigctl_parse.c + * Really fix CM108 ptt_bitnum usage + * Fix Elecraft power2mW precision/accuracy + * Fix power on/off/on for Icom rigs with rigctld power_on=0 + +------------------------------------------------------------------- Old: ---- Hamlib-4.5.4.tar.gz New: ---- Hamlib-4.5.5.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ hamlib.spec ++++++ --- /var/tmp/diff_new_pack.oAtERP/_old 2023-04-11 13:52:04.287677784 +0200 +++ /var/tmp/diff_new_pack.oAtERP/_new 2023-04-11 13:52:04.291677806 +0200 @@ -18,7 +18,7 @@ %define sover 4 Name: hamlib -Version: 4.5.4 +Version: 4.5.5 Release: 0 Summary: Run-time library to control radio transcievers and receivers License: LGPL-2.1-only ++++++ Hamlib-4.5.4.tar.gz -> Hamlib-4.5.5.tar.gz ++++++ ++++ 4400 lines of diff (skipped)
