Hello community,
here is the log from the commit of package raspberrypi-firmware.14954 for
openSUSE:Leap:15.1:Update checked in at 2020-11-14 18:28:31
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Leap:15.1:Update/raspberrypi-firmware.14954 (Old)
and
/work/SRC/openSUSE:Leap:15.1:Update/.raspberrypi-firmware.14954.new.24930 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware.14954"
Sat Nov 14 18:28:31 2020 rev:1 rq:847774 version:2019.11.19
Changes:
--------
New Changes file:
--- /dev/null 2020-11-12 01:11:43.462704170 +0100
+++
/work/SRC/openSUSE:Leap:15.1:Update/.raspberrypi-firmware.14954.new.24930/raspberrypi-firmware-config.changes
2020-11-14 18:28:35.700387386 +0100
@@ -0,0 +1,390 @@
+-------------------------------------------------------------------
+Wed Jan 8 14:48:14 UTC 2020 - Matthias Brugger <[email protected]>
+
+- Update to 6e4a7232c (2019-11-19):
+ - Add support for CM3+ (bsc#1157822)
+
+-------------------------------------------------------------------
+Tue Mar 12 13:03:58 UTC 2019 - Nicolas Patricio Saenz Julienne
<[email protected]>
+
+- Remove rpi3-hdmi overlay from config.txt (bsc#1127537)
+
+-------------------------------------------------------------------
+Thu Apr 5 17:07:29 UTC 2018 - [email protected]
+
+- Allow user defined config options (bsc#1088356)
+- Move HDMI workaround to rpi3 section (fixes RPi2 HDMI output)
+
+-------------------------------------------------------------------
+Wed Mar 14 09:34:05 UTC 2018 - [email protected]
+
+- Update to 3347884 (2018-03-13)
+ - Add support for new RPi3 B+ (bsc#1085262)
+
+-------------------------------------------------------------------
+Mon Feb 19 10:48:28 UTC 2018 - [email protected]
+
+- Add overlays to match previous U-Boot provided DT
+- Add Recommends: on dt and config packages
+
+-------------------------------------------------------------------
+Fri Feb 16 13:50:46 UTC 2018 - [email protected]
+
+- Update to 445b6a8 (2018-02-09)
+
+-------------------------------------------------------------------
+Wed Jan 31 12:54:22 UTC 2018 - [email protected]
+
+- Avoid bashisms in %post
+
+-------------------------------------------------------------------
+Mon Jan 22 10:23:06 UTC 2018 - [email protected]
+
+- Merge config.txt files into a single config.txt with subsections
+- Set GPU memory usage to 32MB, this is enough for vc4 (boo#1074566)
+- Update to 050175d (2018-01-17)
+
+-------------------------------------------------------------------
+Sat Nov 25 19:03:08 UTC 2017 - [email protected]
+
+- Add rpi0w sub-package and config (boo#1069828). Derived from rpi3.
+- Update to abfb4be3e1 (2017-11-17)
+
+-------------------------------------------------------------------
+Thu Oct 12 08:47:43 UTC 2017 - [email protected]
+
+- Update to a88e126a (2017-10-11)
+
+-------------------------------------------------------------------
+Wed Aug 23 14:01:08 UTC 2017 - [email protected]
+
+- Update to 8fe001e (2017-08-22)
+
+-------------------------------------------------------------------
+Wed Apr 19 04:14:55 UTC 2017 - [email protected]
+
+- Update to b038854 (2017-04-04)
+
+-------------------------------------------------------------------
+Mon Feb 20 18:12:19 UTC 2017 - [email protected]
+
+- Update to 2b495ac (2017-02-20)
+
+-------------------------------------------------------------------
+Thu Jan 12 14:24:06 UTC 2017 - [email protected]
+
+- Update to e44f66a (2017-01-10)
+
+-------------------------------------------------------------------
+Fri Nov 18 16:18:56 UTC 2016 - [email protected]
+
+- Update to 64996b0 (2016-11-16)
+
+-------------------------------------------------------------------
+Tue Oct 25 07:52:59 UTC 2016 - [email protected]
+
+- Update to 4a0e54e (2016-10-20)
+
+-------------------------------------------------------------------
+Wed Oct 12 13:33:31 UTC 2016 - [email protected]
+
+- Update to a021d6e (2016-10-11)
+
+-------------------------------------------------------------------
+Tue Sep 27 09:09:10 UTC 2016 - [email protected]
+
+- Increase from 64 MB to 96 MB of RAM for GPU for RPi with 256 or
+ 512 MB of RAM to be able to decode a 1080p h264 video in kodi
+
+-------------------------------------------------------------------
+Tue Sep 27 08:53:46 UTC 2016 - [email protected]
+
+- Update to ad8608c (2016-09-21)
+
+-------------------------------------------------------------------
+Thu Sep 15 08:53:28 UTC 2016 - [email protected]
+
+- Use "avoid_warnings=1" in config-rpi{,2,3}.txt (bsc#998973)
+
+-------------------------------------------------------------------
+Mon Sep 12 13:30:41 UTC 2016 - [email protected]
+
+- Clean up config-{rpi2,rpi3}.txt, dropping rpi1 defaults
+* On the rpi1 Model B rev. 2 performance results are similar
+ with and without defaults, so in doubt leave our settings in
+ config-rpi.txt until proven the defaults work better somewhere.
+
+-------------------------------------------------------------------
+Tue Sep 6 08:33:28 UTC 2016 - [email protected]
+
+- Use default frequencies in config-rpi{2,3}.txt (bsc#989511)
+* Defaults work well on rpi2
+* Allow much higher frequencies on rpi3
+
+-------------------------------------------------------------------
+Fri Sep 2 15:29:14 UTC 2016 - [email protected]
+
+- get-from-git.sh: Update for -config-rpi* sub-packages
+- Update to 334f548 (2016-09-02)
+- Add post-install scripts to copy files to /boot/efi where needed.
+ /boot/vc may be the mountpoint for boot.scr based installations
+ or a symlink to /boot/efi. (bsc#996064)
+
+-------------------------------------------------------------------
+Wed Aug 24 13:21:26 UTC 2016 - [email protected]
+
+- Update to d0bc6ce (2016.08.23)
+
+-------------------------------------------------------------------
+Thu Jul 21 19:59:56 UTC 2016 - [email protected]
+
+- Update to 051aed7 (2016.07.15)
+- Simplify spec file a bit
+
+-------------------------------------------------------------------
+Thu Jun 16 15:51:19 UTC 2016 - [email protected]
+
+- Fix last changelog entry
+- Run format_spec_file in pre_checkin.sh to fix spec file header
+- Restore silently dropped defattr that breaks older builds
+
+-------------------------------------------------------------------
+Mon Jun 6 11:44:28 UTC 2016 - [email protected]
+
+- remove branding-openSUSE subpackage and split config
+ into the 3 variants for (rpi, rpi2, rpi3)
+
+-------------------------------------------------------------------
+Tue May 31 09:59:59 UTC 2016 - [email protected]
+
+- Update to ac0c0bf (2016-05-20)
+
+-------------------------------------------------------------------
+Tue May 10 17:58:12 UTC 2016 - [email protected]
+
+- mark package as noarch (adds rpmlintrc)
+- split extra bootloaders into separate -extra subpackage
+
+-------------------------------------------------------------------
+Wed May 4 19:37:54 UTC 2016 - [email protected]
+
+- Enable aarch64 builds for Raspberry Pi 3
+
+-------------------------------------------------------------------
+Fri Apr 29 08:49:32 UTC 2016 - [email protected]
+
+- Update to 20958cd (2016-04-27)
+
+-------------------------------------------------------------------
+Wed Apr 6 12:11:46 UTC 2016 - [email protected]
+
+- Update to c065500 (2016-04-05)
+
+-------------------------------------------------------------------
+Mon Mar 7 14:41:14 UTC 2016 - [email protected]
+
+- Revert to last actual change b48c36f (2016-03-04)
+- Fix version bug found by Guillaume by using git-log (as intended)
+
+-------------------------------------------------------------------
+Mon Mar 7 12:54:59 UTC 2016 - [email protected]
+
+- Update to 845eb06 (2016-03-05)
+
+-------------------------------------------------------------------
+Mon Mar 7 12:50:58 UTC 2016 - [email protected]
+
+- Fix get-from-git.sh to get version even when packaged files are
++++ 193 more lines (skipped)
++++ between /dev/null
++++ and
/work/SRC/openSUSE:Leap:15.1:Update/.raspberrypi-firmware.14954.new.24930/raspberrypi-firmware-config.changes
New Changes file:
--- /dev/null 2020-11-12 01:11:43.462704170 +0100
+++
/work/SRC/openSUSE:Leap:15.1:Update/.raspberrypi-firmware.14954.new.24930/raspberrypi-firmware.changes
2020-11-14 18:28:35.776387462 +0100
@@ -0,0 +1,385 @@
+-------------------------------------------------------------------
+Wed Jan 8 14:48:14 UTC 2020 - Matthias Brugger <[email protected]>
+
+- Update to 6e4a7232c (2019-11-19):
+ - Add support for CM3+ (bsc#1157822)
+
+-------------------------------------------------------------------
+Thu Apr 5 17:07:29 UTC 2018 - [email protected]
+
+- Allow user defined config options (bsc#1088356)
+- Move HDMI workaround to rpi3 section (fixes RPi2 HDMI output)
+
+-------------------------------------------------------------------
+Wed Mar 14 09:34:05 UTC 2018 - [email protected]
+
+- Update to 3347884 (2018-03-13)
+ - Add support for new RPi3 B+ (bsc#1085262)
+
+-------------------------------------------------------------------
+Mon Feb 19 10:48:28 UTC 2018 - [email protected]
+
+- Add overlays to match previous U-Boot provided DT
+- Add Recommends: on dt and config packages
+
+-------------------------------------------------------------------
+Fri Feb 16 13:50:46 UTC 2018 - [email protected]
+
+- Update to 445b6a8 (2018-02-09)
+
+-------------------------------------------------------------------
+Wed Jan 31 12:54:22 UTC 2018 - [email protected]
+
+- Avoid bashisms in %post
+
+-------------------------------------------------------------------
+Mon Jan 22 10:23:06 UTC 2018 - [email protected]
+
+- Merge config.txt files into a single config.txt with subsections
+- Set GPU memory usage to 32MB, this is enough for vc4 (boo#1074566)
+- Update to 050175d (2018-01-17)
+
+-------------------------------------------------------------------
+Sat Nov 25 19:03:08 UTC 2017 - [email protected]
+
+- Add rpi0w sub-package and config (boo#1069828). Derived from rpi3.
+- Update to abfb4be3e1 (2017-11-17)
+
+-------------------------------------------------------------------
+Thu Oct 12 08:47:43 UTC 2017 - [email protected]
+
+- Update to a88e126a (2017-10-11)
+
+-------------------------------------------------------------------
+Wed Aug 23 14:01:08 UTC 2017 - [email protected]
+
+- Update to 8fe001e (2017-08-22)
+
+-------------------------------------------------------------------
+Wed Apr 19 04:14:55 UTC 2017 - [email protected]
+
+- Update to b038854 (2017-04-04)
+
+-------------------------------------------------------------------
+Mon Feb 20 18:12:19 UTC 2017 - [email protected]
+
+- Update to 2b495ac (2017-02-20)
+
+-------------------------------------------------------------------
+Thu Jan 12 14:24:06 UTC 2017 - [email protected]
+
+- Update to e44f66a (2017-01-10)
+
+-------------------------------------------------------------------
+Fri Nov 18 16:18:56 UTC 2016 - [email protected]
+
+- Update to 64996b0 (2016-11-16)
+
+-------------------------------------------------------------------
+Tue Oct 25 07:52:59 UTC 2016 - [email protected]
+
+- Update to 4a0e54e (2016-10-20)
+
+-------------------------------------------------------------------
+Wed Oct 12 13:33:31 UTC 2016 - [email protected]
+
+- Update to a021d6e (2016-10-11)
+
+-------------------------------------------------------------------
+Tue Sep 27 09:09:10 UTC 2016 - [email protected]
+
+- Increase from 64 MB to 96 MB of RAM for GPU for RPi with 256 or
+ 512 MB of RAM to be able to decode a 1080p h264 video in kodi
+
+-------------------------------------------------------------------
+Tue Sep 27 08:53:46 UTC 2016 - [email protected]
+
+- Update to ad8608c (2016-09-21)
+
+-------------------------------------------------------------------
+Thu Sep 15 08:53:28 UTC 2016 - [email protected]
+
+- Use "avoid_warnings=1" in config-rpi{,2,3}.txt (bsc#998973)
+
+-------------------------------------------------------------------
+Mon Sep 12 13:30:41 UTC 2016 - [email protected]
+
+- Clean up config-{rpi2,rpi3}.txt, dropping rpi1 defaults
+* On the rpi1 Model B rev. 2 performance results are similar
+ with and without defaults, so in doubt leave our settings in
+ config-rpi.txt until proven the defaults work better somewhere.
+
+-------------------------------------------------------------------
+Tue Sep 6 08:33:28 UTC 2016 - [email protected]
+
+- Use default frequencies in config-rpi{2,3}.txt (bsc#989511)
+* Defaults work well on rpi2
+* Allow much higher frequencies on rpi3
+
+-------------------------------------------------------------------
+Fri Sep 2 15:29:14 UTC 2016 - [email protected]
+
+- get-from-git.sh: Update for -config-rpi* sub-packages
+- Update to 334f548 (2016-09-02)
+- Add post-install scripts to copy files to /boot/efi where needed.
+ /boot/vc may be the mountpoint for boot.scr based installations
+ or a symlink to /boot/efi. (bsc#996064)
+
+-------------------------------------------------------------------
+Wed Aug 24 13:21:26 UTC 2016 - [email protected]
+
+- Update to d0bc6ce (2016.08.23)
+
+-------------------------------------------------------------------
+Thu Jul 21 19:59:56 UTC 2016 - [email protected]
+
+- Update to 051aed7 (2016.07.15)
+- Simplify spec file a bit
+
+-------------------------------------------------------------------
+Thu Jun 16 15:51:19 UTC 2016 - [email protected]
+
+- Fix last changelog entry
+- Run format_spec_file in pre_checkin.sh to fix spec file header
+- Restore silently dropped defattr that breaks older builds
+
+-------------------------------------------------------------------
+Mon Jun 6 11:44:28 UTC 2016 - [email protected]
+
+- remove branding-openSUSE subpackage and split config
+ into the 3 variants for (rpi, rpi2, rpi3)
+
+-------------------------------------------------------------------
+Tue May 31 09:59:59 UTC 2016 - [email protected]
+
+- Update to ac0c0bf (2016-05-20)
+
+-------------------------------------------------------------------
+Tue May 10 17:58:12 UTC 2016 - [email protected]
+
+- mark package as noarch (adds rpmlintrc)
+- split extra bootloaders into separate -extra subpackage
+
+-------------------------------------------------------------------
+Wed May 4 19:37:54 UTC 2016 - [email protected]
+
+- Enable aarch64 builds for Raspberry Pi 3
+
+-------------------------------------------------------------------
+Fri Apr 29 08:49:32 UTC 2016 - [email protected]
+
+- Update to 20958cd (2016-04-27)
+
+-------------------------------------------------------------------
+Wed Apr 6 12:11:46 UTC 2016 - [email protected]
+
+- Update to c065500 (2016-04-05)
+
+-------------------------------------------------------------------
+Mon Mar 7 14:41:14 UTC 2016 - [email protected]
+
+- Revert to last actual change b48c36f (2016-03-04)
+- Fix version bug found by Guillaume by using git-log (as intended)
+
+-------------------------------------------------------------------
+Mon Mar 7 12:54:59 UTC 2016 - [email protected]
+
+- Update to 845eb06 (2016-03-05)
+
+-------------------------------------------------------------------
+Mon Mar 7 12:50:58 UTC 2016 - [email protected]
+
+- Fix get-from-git.sh to get version even when packaged files are
+ not in the last commit
+
+-------------------------------------------------------------------
+Tue Mar 1 14:49:16 UTC 2016 - [email protected]
+
++++ 188 more lines (skipped)
++++ between /dev/null
++++ and
/work/SRC/openSUSE:Leap:15.1:Update/.raspberrypi-firmware.14954.new.24930/raspberrypi-firmware.changes
New:
----
config.txt
get-from-git.sh
pre_checkin.sh
raspberrypi-firmware-2019.11.19.tar.bz2
raspberrypi-firmware-config.changes
raspberrypi-firmware-config.spec
raspberrypi-firmware-rpmlintrc
raspberrypi-firmware.changes
raspberrypi-firmware.spec
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ raspberrypi-firmware-config.spec ++++++
#
# spec file for package raspberrypi-firmware-config
#
# Copyright (c) 2020 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via https://bugs.opensuse.org/
#
Name: raspberrypi-firmware-config
Version: 2019.11.19
Release: 0
Summary: Configuration for the Raspberry Pi firmware loader
License: MIT
Group: System/Boot
URL: https://github.com/raspberrypi/firmware/
Source: config.txt
BuildRequires: raspberrypi-firmware
Requires: raspberrypi-firmware = %{version}
Conflicts: otherproviders(raspberrypi-firmware-config)
Provides: raspberrypi-firmware-branding-openSUSE = %{version}
Obsoletes: raspberrypi-firmware-branding-openSUSE < %{version}
Provides: raspberrypi-firmware-config = %{version}
BuildArch: noarch
Provides: raspberrypi-firmware-config-rpi = %{version}
Obsoletes: raspberrypi-firmware-config-rpi < %{version}
Provides: raspberrypi-firmware-config-rpi0w = %{version}
Obsoletes: raspberrypi-firmware-config-rpi0w < %{version}
Provides: raspberrypi-firmware-config-rpi2 = %{version}
Obsoletes: raspberrypi-firmware-config-rpi2 < %{version}
Provides: raspberrypi-firmware-config-rpi3 = %{version}
Obsoletes: raspberrypi-firmware-config-rpi3 < %{version}
%description
This package configures the Raspberry Pi boot process.
Note: config.txt can be used to set some params (gpu_mem, etc.)
%prep
%build
%install
install -D -p -m 0644 %{SOURCE0} %{buildroot}/boot/vc/config.txt
%post
if mountpoint -q /boot/efi && [ ! -L /boot/efi ]; then
[ -f /boot/efi/config.txt ] && cp /boot/efi/config.txt
/boot/efi/config.txt.rpmsave
cp /boot/vc/config.txt /boot/efi/config.txt
fi
%files
%defattr(-,root,root)
%config /boot/vc/config.txt
%changelog
++++++ raspberrypi-firmware.spec ++++++
#
# spec file for package raspberrypi-firmware
#
# Copyright (c) 2020 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
# upon. The license for this file, and modifications and additions to the
# file, is the same license as for the pristine package itself (unless the
# license for the pristine package is not an Open Source License, in which
# case the license is the MIT License). An "Open Source License" is a
# license that conforms to the Open Source Definition (Version 1.9)
# published by the Open Source Initiative.
# Please submit bugfixes or comments via https://bugs.opensuse.org/
#
Name: raspberrypi-firmware
Version: 2019.11.19
Release: 0
Summary: Binary bootloader and firmware files for Raspberry Pi
License: SUSE-Firmware
Group: System/Boot
URL: https://github.com/raspberrypi/firmware/
Source0: raspberrypi-firmware-%{version}.tar.bz2
Source1: get-from-git.sh
Source99: %{name}-rpmlintrc
BuildRoot: %{_tmppath}/%{name}-%{version}-build
BuildArch: noarch
Requires(post): util-linux
Recommends: raspberrypi-firmware-dt
Recommends: raspberrypi-firmware-config
%description
Binary bootloader and firmware files for Raspberry Pi
%package extra
Summary: Extra bootloaders for Raspberry Pi
Group: System/Boot
Requires: raspberrypi-firmware = %{version}-%{release}
Requires(post): util-linux
%description extra
This package provides the console, experimental and debug
firmware files for Raspberry Pi
%prep
%setup -q
%build
%install
mkdir -p %{buildroot}/boot/vc
cp -a boot/start.elf boot/start_*.elf %{buildroot}/boot/vc
cp -a boot/fixup.dat boot/fixup_*.dat %{buildroot}/boot/vc
cp -a boot/*.bin boot/LICENCE.broadcom %{buildroot}/boot/vc
%post
if mountpoint -q /boot/efi && [[ ! -L /boot/efi ]]; then
for f in start.elf fixup.dat bootcode.bin; do
cp /boot/vc/$f /boot/efi/
done
fi
%post extra
if mountpoint -q /boot/efi && [[ ! -L /boot/efi ]]; then
for suffix in _cd _db _x; do
cp /boot/vc/start${suffix}.elf /boot/efi/
cp /boot/vc/fixup${suffix}.dat /boot/efi/
done
fi
%files
%defattr(-,root,root)
%dir /boot/vc
/boot/vc/start.elf
/boot/vc/fixup.dat
/boot/vc/bootcode.bin
%doc /boot/vc/LICENCE.broadcom
%files extra
%defattr(-,root,root)
/boot/vc/start_cd.elf
/boot/vc/start_db.elf
/boot/vc/start_x.elf
/boot/vc/fixup_cd.dat
/boot/vc/fixup_db.dat
/boot/vc/fixup_x.dat
%changelog
++++++ config.txt ++++++
# Get more options/information on http://elinux.org/RPiconfig
# or on https://www.raspberrypi.org/documentation/configuration/config-txt.md
#
# !!!!! This file will get overwritten by updates. Please use !!!!!
# !!!!! extraconfig.txt if you want to set additional !!!!!
# !!!!! configuration options or add dt overlays. !!!!!
# Our kernels are located on a Linux partition. Chainload U-Boot to load them.
kernel=u-boot.bin
# Use 32 MB for GPU for all RPis (Min 16 - Max 192 MB)
# We don't need that much memory reserved for it, because we drive most hardware
# from Linux, not the VPU OS
gpu_mem=32
# Turbo mode: 0 = enable dynamic freq/voltage - 1 = always max
force_turbo=0
# Start in turbo mode for 30 seconds or until cpufreq sets a frequency
initial_turbo=30
# DO NOT overvoltage manually to not void warranty!
over_voltage=0
# Fix mini UART input frequency, and setup/enable up the UART.
enable_uart=1
# Disable warning overlays as they don't work well together with linux's
graphical output
avoid_warnings=1
# These are not applied automatically? Needed to use respective upstream
drivers.
dtoverlay=vc4-kms-v3d
dtoverlay=dwc2
# This overlay fixes divergences between the RPi device tree and what
# upstream provides
dtoverlay=upstream-mmc
dtoverlay=upstream-aux-interrupt
[pi1]
# Max ARM freq (default 700 MHz)
arm_freq=840
# Max core (GPU) freq (default 250 MHz)
core_freq=375
# SDRAM freq (default 400)
sdram_freq=400
[pi3]
# Boot in AArch64 (64-bit) mode
arm_control=0x200
[all]
# Allow user overrides of config options
include extraconfig.txt
++++++ get-from-git.sh ++++++
#!/bin/bash
# this is a huge hunk of stuff, so reuse the local repo if possible
if [ -d firmware/.git ]; then
cd firmware
git pull
cd ..
else
set -e
git clone --depth 1 https://github.com/raspberrypi/firmware.git
set +e
fi
TOPDIR=$(pwd)
SOURCES="README.md boot/LICENCE.broadcom boot/*.elf boot/*.bin boot/*.dat"
cd firmware
LINE=$(git log --format=format:"%h %ai" -- ${SOURCES}|head -n 1)
set -- $LINE
REV=$1
DATE=$2
VER=${DATE//-/.}
set -e
git archive --prefix=raspberrypi-firmware-$VER/ -o
$TOPDIR/raspberrypi-firmware-${VER}.tar master -- ${SOURCES}
cd $TOPDIR
osc rm -f raspberrypi-firmware-*.tar.bz2 || true
bzip2 --force raspberrypi-firmware-${VER}.tar
osc add raspberrypi-firmware-${VER}.tar.bz2
for f in raspberrypi-firmware.spec raspberrypi-firmware-config.spec; do
sed -i "s/^Version:.*/Version: $VER/" $f
done
osc vc raspberrypi-firmware -m "Update to $REV ($DATE)"
sh pre_checkin.sh
++++++ pre_checkin.sh ++++++
#!/bin/bash
ln -f raspberrypi-firmware.changes raspberrypi-firmware-config.changes
osc service localrun format_spec_file
++++++ raspberrypi-firmware-rpmlintrc ++++++
# These are binaries not executed on the CPU but on the graphics card
addFilter('.*arch-independent-package-contains-binary-or-object.*/boot/vc/.*.elf')
_______________________________________________
openSUSE Commits mailing list -- [email protected]
To unsubscribe, email [email protected]
List Netiquette: https://en.opensuse.org/openSUSE:Mailing_list_netiquette
List Archives:
https://lists.opensuse.org/archives/list/[email protected]
