Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package libqmi for openSUSE:Factory checked in at 2021-03-10 08:49:01 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/libqmi (Old) and /work/SRC/openSUSE:Factory/.libqmi.new.2378 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "libqmi" Wed Mar 10 08:49:01 2021 rev:36 rq:876406 version:1.28.2 Changes: -------- --- /work/SRC/openSUSE:Factory/libqmi/libqmi.changes 2021-01-18 11:26:22.704420537 +0100 +++ /work/SRC/openSUSE:Factory/.libqmi.new.2378/libqmi.changes 2021-03-10 08:49:17.346395625 +0100 @@ -1,0 +2,90 @@ +Mon Mar 1 19:39:14 UTC 2021 - Martin Hauke <mar...@gmx.de> + +- Update to version 1.28.2 + * libqmi-glib: + + Fixed build with GLib < 2.58. + + Simplified the qmi_wwan add_mux/del_mux logic assuming there + is no delay in the creation and deletion of the net links. + +------------------------------------------------------------------- +Tue Feb 23 06:58:56 UTC 2021 - Paolo Stivanin <i...@paolostivanin.com> + +- update to 1.28.0: + * The QmiDevice interfaces to work with the expected data format and the wwan + interface name should now be considered to be specific to QMI devices exposed + by the upstream 'qmi_wwan' kernel driver. If the device is exposed with a + different driver (e.g. PCIe or QRTR) these methods will always fail. + * The QmiDevice now supports configuring the 'pass_through' sysfs setting in + the network interfaces exposed by the 'qmi_wwan' kernel driver, with a new + 'qmap-pass-through' expected data format type. In this mode, the network + device will be managed by the rmnet kernel driver. A new method is also + provided to check in runtime whether a given expected data format value is + supported by the kernel or not. + * The QmiDevice now includes methods to list, create and delete links on the + network interface, that can be used to setup QMAP based multiplexing of + different data streams, e.g. connected to different APNs. When using the + 'qmi_wwan' kernel driver, the link management logic depends on the configured + expected data format: + ** rmnet netlink operations will be used if 'qmap-pass-through' expected + data format is configured. + ** add_mux/del_mux operations will be used if 'raw-ip' expected data format + is configured. + * New services: + ** New 'SAR' (Specific Absorption Rate) service, with support for the "Set RF + State" and "Get RF State" request/responses. + * New request/response/indications: + ** uim: implement "Refresh Register" request/response. + ** uim: implement "Refresh Register All" request/response. + ** uim: implement "Refresh Complete" request/response. + ** uim: implement "Refresh" indication. + ** loc: implement "Get Engine Lock" request/response. + ** loc: implement "Set Engine Lock" request/response. + ** nas: implement "Get DRX" request/response. + ** nas: implement "Get PLMN Name" request/response. + ** wms: implement "Send Ack" request/response. + ** wds: implement "Bind Data Port" request/response. + ** wds: implement "Get Max LTE Attach PDN Number" request/response. + ** wds: implement "Get LTE Attach PDN List" request/response. + ** wds: implement "Set LTE Attach PDN List" request/response. + ** wds: implement "Set LTE Attach PDN List" indication. + ** wds: implement "Get LTE Attach Parameters" request/response. + ** wds: renamed "Get Default Profile Num" to "Get Default Profile Number", + and provided compat symbols to avoid breaking API. + ** wds: renamed "Set Default Profile Num" to "Set Default Profile Number", + and provided compat symbols to avoid breaking API. + * New TLVs supported in existing messages: + ** nas: added the "Rx Chain 2/3 Info" TLVs in "Get Tx Rx Info". + ** nas: added the "LTE Info Timing Advance" TLV in "Get Cell Location Info". + ** nas: added the "LTE Voice Domain", "CDMA Registration Zone ID", "GSM + Routing Area Code", "WCDMA Routing Area Code" and "CDMA Resolved MCC" + TLVs in "Get System Info". + * libqmi-glib: + ** Added support for 'embedded' and 'pcie' endpoint types. + ** Added support for QMAPv5 data aggregation type. + * qmicli: + ** When built with QRTR support, the '--device' option now allows QRTR URIs + (e.g. 'qrtr://0'). + ** New '--link-list', '--link-add', '--link-delete' and '--link-delete-all' + commands. + ** New '--uim-monitor-refresh-file' command. + ** New '--uim-monitor-refresh-all' command. + ** New '--wds-bind-data-port' command. + ** New '-loc-get-operation-mode' and '--loc-set-operation-mode' commands. + ** New '-loc-get-engine-lock' and '--loc-set-engine-lock' commands. + ** New '--wds-get-lte-attach-parameters' command. + ** New '--wds-get-max-lte-attach-pdn-num' command. + ** New '--wds-get-lte-attach-pdn-list' and '--wds-set-lte-attach-pdn-list' + commands. + ** Updated the '--wds-start-network' command with a timeout of 180s. + ** Updated the '--wds-stop-network' command with a timeout of 120s. + ** Updated the '--dms-set-firmware-preference' command to use a key-value + pair based input instead of predefined fields. + * collections: + ** basic: added UIM event registration commands. + ** basic: added UIM slot management commands. + ** basic: added UIM refresh related commands. + ** basic: added WDS bind data port commands. + ** basic: added WDS initial LTE bearer management commands. + ** basic: added NAS PLMN name commands. + +------------------------------------------------------------------- Old: ---- libqmi-1.26.8.tar.xz New: ---- libqmi-1.28.2.tar.xz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ libqmi.spec ++++++ --- /var/tmp/diff_new_pack.5klMxj/_old 2021-03-10 08:49:18.034396335 +0100 +++ /var/tmp/diff_new_pack.5klMxj/_new 2021-03-10 08:49:18.038396339 +0100 @@ -20,7 +20,7 @@ %define _soname libqmi-glib5 Name: libqmi -Version: 1.26.8 +Version: 1.28.2 Release: 0 # NOTE: The file headers state LESSER GPL, which is a mistake. The upstream intended license is LIBRARY GPL 2.0+ Summary: Library to control QMI devices ++++++ libqmi-1.26.8.tar.xz -> libqmi-1.28.2.tar.xz ++++++ ++++ 89362 lines of diff (skipped)
