Script 'mail_helper' called by obssrc
Hello community,
here is the log from the commit of package python-flake8-isort for
openSUSE:Factory checked in at 2026-11-09 16:04:51
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/python-flake8-isort (Old)
and /work/SRC/openSUSE:Factory/.python-flake8-isort.new.3759290 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "python-flake8-isort"
Mon Nov 9 16:04:51 2026 rev:9 rq:1396208 version:7.1.0
Changes:
--------
--- /work/SRC/openSUSE:Factory/python-flake8-isort/python-flake8-isort.changes
2026-02-17 18:14:21.609465166 +0100
+++
/work/SRC/openSUSE:Factory/.python-flake8-isort.new.3759290/python-flake8-isort.changes
2026-11-09 16:05:33.548115368 +0100
@@ -1,0 +2,8 @@
+Sun Nov 8 23:01:34 UTC 2026 - Dirk Müller <[email protected]>
+
+- update to 7.1.0:
+ * update supported python versions (3.11 to 3.15) @gforcada
+ * improve CI speed by using `uvx` and `prek` @gforcada
+ * tighten GHA with `zizmor` @gforcada
+
+-------------------------------------------------------------------
Old:
----
flake8_isort-7.0.0.tar.gz
New:
----
flake8_isort-7.1.0.tar.gz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ python-flake8-isort.spec ++++++
--- /var/tmp/diff_new_pack.xxWeHG/_old 2026-11-09 16:05:34.351149033 +0100
+++ /var/tmp/diff_new_pack.xxWeHG/_new 2026-11-09 16:05:34.355149201 +0100
@@ -18,7 +18,7 @@
%{?sle15_python_module_pythons}
Name: python-flake8-isort
-Version: 7.0.0
+Version: 7.1.0
Release: 0
Summary: Plugin integrating isort in flake8
License: GPL-2.0-only
@@ -30,14 +30,11 @@
BuildRequires: %{python_module isort >= 5.0.0}
BuildRequires: %{python_module pip}
BuildRequires: %{python_module pytest}
-BuildRequires: %{python_module testfixtures}
-BuildRequires: %{python_module toml}
BuildRequires: %{python_module wheel}
BuildRequires: fdupes
BuildRequires: python-rpm-macros
Requires: python-flake8
Requires: python-isort >= 5.0.0
-Requires: python-testfixtures
BuildArch: noarch
%python_subpackages
@@ -58,7 +55,7 @@
%pytest ./run_tests.py
%files %{python_files}
-%doc README.rst CHANGES.rst
+%doc README.md CHANGES.md
%license LICENSE*
%{python_sitelib}/flake8_isort.py*
%pycache_only %{python_sitelib}/__pycache__/flake8_isort*
++++++ flake8_isort-7.0.0.tar.gz -> flake8_isort-7.1.0.tar.gz ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/.github/dependabot.yml
new/flake8_isort-7.1.0/.github/dependabot.yml
--- old/flake8_isort-7.0.0/.github/dependabot.yml 1970-01-01
01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/.github/dependabot.yml 2020-02-02
01:00:00.000000000 +0100
@@ -0,0 +1,10 @@
+version: 2
+updates:
+
+ - package-ecosystem: "github-actions"
+ directory: "/"
+ schedule:
+ # Check for updates to GitHub Actions every week
+ interval: "weekly"
+ cooldown:
+ default-days: 7
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/.github/workflows/testing.yml
new/flake8_isort-7.1.0/.github/workflows/testing.yml
--- old/flake8_isort-7.0.0/.github/workflows/testing.yml 2020-02-02
01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/.github/workflows/testing.yml 2020-02-02
01:00:00.000000000 +0100
@@ -1,58 +1,55 @@
name: Testing
+
on:
push:
branches: [main]
pull_request:
branches: [main]
+
+permissions: {}
+
env:
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
jobs:
test:
name: Testing on
runs-on: "ubuntu-latest"
strategy:
matrix:
- python-version: ["3.14", "3.13", "3.12", "3.11", "3.10", "pypy-3.10"]
+ python-version: ["3.15", "3.14", "3.13", "3.12", "3.11", "pypy-3.10"]
steps:
- - uses: actions/checkout@v4
- - name: Set up Python
- uses: actions/setup-python@v5
+ - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 #
v7.0.1
with:
- python-version: ${{ matrix.python-version }}
- - name: Cache packages
- uses: actions/cache@v4
+ persist-credentials: false
+ - name: Install uv + caching
+ uses: astral-sh/setup-uv@68559e99cc807c1eb7e9238fd43a15bba460eec2 #
v10.3.3
with:
- path: ~/.cache/pip
- key: ${{ runner.os }}-pip-${{ matrix.python-version }}-${{
hashFiles('tox.ini') }}
- restore-keys: |
- ${{ runner.os }}-pip-${{ matrix.python-version }}-
- - name: Install dependencies
- run: python -m pip install tox
+ enable-cache: true
+ cache-dependency-glob: |
+ tox.ini
+ pyproject.toml
+ python-version: ${{ matrix.python-version }}
- name: Test
- run: tox -e test
+ run: uvx --with flake8 --with isort pytest run_tests.py
lint:
name: Lint code
runs-on: "ubuntu-latest"
strategy:
matrix:
- python-version: ["3.13"]
+ python-version: ["3.11"]
steps:
- - uses: actions/checkout@v4
- - name: Set up Python
- uses: actions/setup-python@v5
+ - uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1 #
v7.0.1
with:
- python-version: ${{ matrix.python-version }}
- - name: Cache packages
- uses: actions/cache@v4
+ persist-credentials: false
+ - name: Install uv + caching
+ uses: astral-sh/setup-uv@68559e99cc807c1eb7e9238fd43a15bba460eec2 #
v10.3.3
with:
- path: |
- ~/.cache/pre-commit
- ~/.cache/pip
- key: ${{ runner.os }}-pip-${{ matrix.python-version }}-${{
hashFiles('tox.ini') }}
- restore-keys: |
- ${{ runner.os }}-pip-${{ matrix.python-version }}-
- - name: Install dependencies
- run: python -m pip install tox
+ enable-cache: true
+ cache-dependency-glob: |
+ tox.ini
+ pyproject.toml
+ python-version: ${{ matrix.python-version }}
- name: Run linting
- run: tox -e lint
+ run: uvx prek run -a
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/.pre-commit-config.yaml
new/flake8_isort-7.1.0/.pre-commit-config.yaml
--- old/flake8_isort-7.0.0/.pre-commit-config.yaml 2020-02-02
01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/.pre-commit-config.yaml 2020-02-02
01:00:00.000000000 +0100
@@ -4,16 +4,16 @@
repos:
- repo: https://github.com/asottile/pyupgrade
- rev: v3.20.0
+ rev: v3.21.2
hooks:
- id: pyupgrade
- args: [--py38-plus]
+ args: [--py311-plus]
- repo: https://github.com/pycqa/isort
- rev: 6.0.1
+ rev: 9.0.1
hooks:
- id: isort
-- repo: https://github.com/psf/black
- rev: 25.1.0
+- repo: https://github.com/psf/black-pre-commit-mirror
+ rev: 26.5.1
hooks:
- id: black
- repo: https://github.com/PyCQA/flake8
@@ -32,20 +32,24 @@
- flake8-quotes
- repo: https://github.com/codespell-project/codespell
- rev: v2.4.1
+ rev: v2.4.3
hooks:
- id: codespell
additional_dependencies:
- tomli
- repo: https://github.com/mgedmin/check-manifest
- rev: "0.50"
+ rev: "0.51"
hooks:
- id: check-manifest
- repo: https://github.com/regebro/pyroma
- rev: "5.0"
+ rev: "5.1b1"
hooks:
- id: pyroma
- repo: https://github.com/mgedmin/check-python-versions
- rev: "0.22.1"
+ rev: "0.24.2"
hooks:
- id: check-python-versions
+- repo: https://github.com/zizmorcore/zizmor-pre-commit
+ rev: v1.31.1
+ hooks:
+ - id: zizmor
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/CHANGES.md
new/flake8_isort-7.1.0/CHANGES.md
--- old/flake8_isort-7.0.0/CHANGES.md 1970-01-01 01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/CHANGES.md 2020-02-02 01:00:00.000000000 +0100
@@ -0,0 +1,268 @@
+# Changelog
+
+## 7.1.0 (2026-11-02)
+
+- update supported python versions (3.11 to 3.15) @gforcada
+
+- improve CI speed by using `uvx` and `prek` @gforcada
+
+- tighten GHA with `zizmor` @gforcada
+
+## 7.0.0 (2025-10-25)
+
+- add support for isort 7.0.0 @gforcada
+
+- drop python 3.9 support and add Python 3.14 support @gforcada
+
+- bump pypy minimum version to 3.10
+
+## 6.1.2 (2025-01-29)
+
+- Add support for isort 6.0.0 @SukiCZ
+
+- Drop python 3.8, and add python 3.13 @SukiCZ
+
+## 6.1.1 (2023-11-03)
+
+- switch from `setup.cfg` to `setup.py` @deronnax
+
+- switch from `setuptools` to `hatchling` @gforcada
+
+- switch to `main` branch @gforcada
+
+- use `tox` and `pre-commit` to ease project maintenance @gforcada
+
+## 6.1.0 (2023-09-15)
+
+- drop python 3.7 support @gforcada
+
+- add preliminary support to Python 3.12 @gforcada
+
+## 6.0.0 (2022-12-22)
+
+- drop isort 4.x support @gforcada
+
+- add support for flake8 6.0.0 @gforcada
+
+- add `--isort-no-skip-gitignore` option to allow temporarily overriding the
set
+ value of isort's `skip_gitignore` option with `False`. This can cause
+ flake8-isort to run significantly faster at the cost of making flake8-isort's
+ behavior differ slightly from the behavior of `isort --check` @gschaffner
+
+## 5.0.3 (2022-11-20)
+
+- fix broken `add_options` method, again. @casperdcl
+
+## 5.0.2 (2022-11-19)
+
+- fix broken `add_options` method @casperdcl
+
+## 5.0.1 (2022-11-18)
+
+- improve the config option is added and read back @gforcada
+
+- bump plugin version @gforcada
+
+## 5.0.0 (2022-10-08)
+
+- update dependencies @gforcada
+
+- revamp GitHub actions @gforcada
+
+- drop python 3.6, and add python 3.10 @gforcada
+
+- use linters and formatters to keep code sane and beautiful @gforcada
+
+## 4.2.0 (2022-08-04)
+
+- fix compatibility with flake8 version 5. @nhymxu
+
+## 4.1.2.post0 (2022-07-25)
+
+- release it as a wheel as well @gforcada
+
+## 4.1.2 (2022-07-25)
+
+- the package no longer depends on `testfixtures`
+
+## 4.1.1 (2021-10-14)
+
+- Release py3 only wheels..
+
+## 4.1.0 (2021-10-14)
+
+- support flake8 4.x @g-as
+
+- switch from travis-ci to github actions. @g-as
+
+- drop python 2.7 support and 3.5 as well @g-as
+
+## 4.0.0 (2020-08-11)
+
+- nothing changed yet
+
+## 4.0.0a0 (2020-08-07)
+
+- support isort >= 5 @bnavigator, @pkolbus
+
+## 3.0.1 (2020-07-08)
+
+- work around `FailedToLoadPlugin` exception by requiring `isort` 4.x.
Likewise,
+ pin the major version of all dependencies, to reduce risk of any future
+ incompatibilities @pkolbus
+
+## 3.0.0 (2020-04-15)
+
+- let `isort` search the configuration, rather than `flake8-isort` try to find
it @jnns
+
+## 2.9.1 (2020-03-28)
+
+- fix flake8 warning @sobolevn
+
+## 2.9.0 (2020-03-16)
+
+- add ``python3.8`` support @sobolevn
+
+## 2.8.0 (2019-12-05)
+
+- look for isort configuration on `.flake8` files as well @JohnHBrock
+
+- document how to install `flake8-isort` on conda @marcelotrevisani
+
+- look for isort configuration on `pyproject.toml` files as well @sanjioh
+
+## 2.7.0 (2019-03-19)
+
+- improve the README @barbossa
+
+- fix isort output when pipes are used @maerteijn
+
+## 2.6.0 (2018-12-01)
+
+- use pytest to run tests @gforcada
+
+- new error code I005 isort foundan unexpected missing import @charettes
+
+- add `isort_show_traceback` option to show verbose multi-line output
+ from `isort`, turned off by default @sobolevn
+
+## 2.5 (2018-03-15)
+
+- Now requires isort >= 4.3.0 @jleclanche
+
+## 2.4 (2018-02-25)
+
+- fix input handling with flake8's --stdin-display-name, and simplify it
@blueyed
+
+- remove flake8-polyfill dependency. flake8 >= 3.2.1 is required already, and
+ stdin is not read directly anymore @blueyed
+
+## 2.3 (2017-12-22)
+
+- fix typo @paltman
+
+- add tox.ini and .editorconfig to config search @cas--
+
+- make this plugin compatible with flake8 hook.
+ As the hook copies the files out of tree,
+ flake8-isort never finds the correct configuration @jaysonsantos
+
+## 2.2.2 (2017-08-19)
+
+- workaround for isort bug when skipping files @danpalmer
+
+## 2.2.1 (2017-05-12)
+
+- release as universal wheel @gforcada
+
+## 2.2 (2017-03-26)
+
+- support flake8 git hook @sergio-alonso
+
+- support python 3.6 @gforcada
+
+- search configuration on home folder @gforcada
+
+## 2.1.3 (2016-11-25)
+
+- fix yet another corner case @gforcada
+
+## 2.1.2 (2016-11-25)
+
+- fix another corner case: ignored files @cas--
+
+## 2.1.1 (2016-11-25)
+
+- fix corner cases of isort: newlines and grouped imports @cas--
+
+## 2.1.0 (2016-11-24)
+
+- show the exact line and kind of error,
+ rather than a generic message @cas--
+
+## 2.0.3 (2016-11-22)
+
+- update trove classifiers @gforcada
+
+## 2.0.2 (2016-11-22)
+
+- add flake8 classifier @sigmavirus24
+
+- require flake8 3.2.1.
+ flake8 series 3.1.x and 3.2.0 where not reporting flake8-isort errors
@gforcada
+
+- test on pypy and pypy3 @gforcada
+
+- fix tests and formatting @gforcada
+
+## 2.0.1 (2016-09-22)
+
+- fix standard input processing @carljm
+
+## 2.0 (2016-09-14)
+
+- Refactor code to handle flake8 version 3 @danpalmer
+
+- require flake8 version 3.0 @gforcada
+
+## 1.3 (2016-06-20)
+
+- Make error messages clearer @do3cc
+
+- use either pep8 or pycodestyle (new name for pep8) [Maxim Novikov]
+
+- fix coveralls @gforcada
+
+## 1.2 (2016-03-05)
+
+- Allow stdin processing, this way text editor can pass input to flake8
@mjacksonw
+
+## 1.1.1 (2016-02-16)
+
+- silence isort messages @gforcada
+
+- improve wording @gforcada
+
+## 1.1 (2016-02-16)
+
+- Check for isort configuration on setup.cfg as well @plumdog
+
+## 1.0 (2015-12-16)
+
+- check for an isort configuration file @gforcada
+
+## 0.2 (2015-09-14)
+
+- fix entry point @gforcada
+
+## 0.1.post0 (2015-09-13)
+
+- release wheels as well @gforcada
+
+## 0.1 (2015-09-13)
+
+- initial release @gforcada
+
+- add all boilerplate files @gforcada
+
+- create the flake8 plugin per se @gforcada
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/CHANGES.rst
new/flake8_isort-7.1.0/CHANGES.rst
--- old/flake8_isort-7.0.0/CHANGES.rst 2020-02-02 01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/CHANGES.rst 1970-01-01 01:00:00.000000000 +0100
@@ -1,372 +0,0 @@
-.. -*- coding: utf-8 -*-
-
-Changelog
-=========
-
-7.0.0 (2025-10-25)
-------------------
-
-- Add support for isort 7.0.0.
- [gforcada]
-
-- Drop python 3.9 support and add Python 3.14 support.
- [gforcada]
-
-- Bump pypy minimum version to 3.10.
-
-6.1.2 (2025-01-29)
-------------------
-
-- Add support for isort 6.0.0.
- [SukiCZ]
-
-- Drop python 3.8, and add python 3.13.
- [SukiCZ]
-
-
-6.1.1 (2023-11-03)
-------------------
-
-- Switch from `setup.cfg` to `setup.py`.
- [deronnax]
-
-- Switch from `setuptools` to `hatchling`.
- [gforcada]
-
-- Switch to `main` branch.
- [gforcada]
-
-- Use `tox` and `pre-commit` to ease project maintenance.
- [gforcada]
-
-6.1.0 (2023-09-15)
-------------------
-
-- Drop python 3.7 support.
- [gforcada]
-
-- Add preliminary support to Python 3.12.
- [gforcada]
-
-6.0.0 (2022-12-22)
-------------------
-
-- Drop isort 4.x support.
- [gforcada]
-
-- Add support for flake8 6.0.0.
- [gforcada]
-
-- Add `--isort-no-skip-gitignore` option to allow temporarily overriding the
set
- value of isort's `skip_gitignore` option with `False`. This can cause
- flake8-isort to run significantly faster at the cost of making flake8-isort's
- behavior differ slightly from the behavior of `isort --check`. [gschaffner]
-
-5.0.3 (2022-11-20)
-------------------
-
-- Fix broken `add_options` method, again. [casperdcl]
-
-5.0.2 (2022-11-19)
-------------------
-
-- Fix broken `add_options` method [casperdcl]
-
-5.0.1 (2022-11-18)
-------------------
-
-- Improve the config option is added and read back. [gforcada]
-
-- Bump plugin version. [gforcada]
-
-5.0.0 (2022-10-08)
-------------------
-
-- Update dependencies. [gforcada]
-
-- Revamp GitHub actions. [gforcada]
-
-- Drop python 3.6, and add python 3.10. [gforcada]
-
-- Use linters and formatters to keep code sane and beautiful. [gforcada]
-
-4.2.0 (2022-08-04)
-------------------
-
-- Fix compatibility with flake8 version 5. [nhymxu]
-
-
-4.1.2.post0 (2022-07-25)
-------------------------
-
-- Release it as a wheel as well. [gforcada]
-
-
-4.1.2 (2022-07-25)
-------------------
-
-- The package no longer depends on ``testfixtures``.
-
-
-4.1.1 (2021-10-14)
-------------------
-
-- Release py3 only wheels..
-
-
-4.1.0 (2021-10-14)
-------------------
-
-- Support flake8 4.x [g-as]
-
-- Switch from travis-ci to github actions. [g-as]
-
-- Drop python 2.7 support and 3.5 as well [g-as]
-
-
-4.0.0 (2020-08-11)
-------------------
-
-- Nothing changed yet.
-
-
-4.0.0a0 (2020-08-07)
---------------------
-
-- support isort >= 5 [bnavigator, pkolbus]
-
-
-3.0.1 (2020-07-08)
-------------------
-
-- Work around `FailedToLoadPlugin` exception by requiring `isort` 4.x.
Likewise,
- pin the major version of all dependencies, to reduce risk of any future
- incompatibilities.
- [pkolbus]
-
-
-3.0.0 (2020-04-15)
-------------------
-
-- Let `isort` search the configuration, rather than `flake8-isort` try to find
it.
- [jnns]
-
-2.9.1 (2020-03-28)
-------------------
-
-- Fix flake8 warning.
- [sobolevn]
-
-2.9.0 (2020-03-16)
-------------------
-
-- Add ``python3.8`` support.
- [sobolevn]
-
-2.8.0 (2019-12-05)
-------------------
-
-- Look for isort configuration on `.flake8` files as well.
- [JohnHBrock]
-
-- Document how to install `flake8-isort` on conda.
- [marcelotrevisani]
-
-- Look for isort configuration on `pyproject.toml` files as well.
- [sanjioh]
-
-2.7.0 (2019-03-19)
-------------------
-
-- Improve the README.
- [barbossa]
-
-- Fix isort output when pipes are used.
- [maerteijn]
-
-2.6.0 (2018-12-01)
-------------------
-
-- Use pytest to run tests.
- [gforcada]
-
-- New error code I005 isort foundan unexpected missing import.
- [charettes]
-
-- Add ``isort_show_traceback`` option to show verbose multi-line output
- from ``isort``, turned off by default
- [sobolevn]
-
-2.5 (2018-03-15)
-----------------
-
-- Now requires isort >= 4.3.0.
- [jleclanche]
-
-
-2.4 (2018-02-25)
-----------------
-
-- Fix input handling with flake8's --stdin-display-name, and simplify it.
- [blueyed]
-
-- Remove flake8-polyfill dependency. flake8 >= 3.2.1 is required already, and
- stdin is not read directly anymore.
- [blueyed]
-
-2.3 (2017-12-22)
-----------------
-
-- Fix typo.
- [paltman]
-
-- Add tox.ini and .editorconfig to config search.
- [cas--]
-
-- Make this plugin compatible with flake8 hook.
- As the hook copies the files out of tree,
- flake8-isort never finds the correct configuration.
- [jaysonsantos]
-
-2.2.2 (2017-08-19)
-------------------
-
-- Workaround for isort bug when skipping files.
- [danpalmer]
-
-2.2.1 (2017-05-12)
-------------------
-
-- Release as universal wheel.
- [gforcada]
-
-2.2 (2017-03-26)
-----------------
-
-- Support flake8 git hook.
- [sergio-alonso]
-
-- Support python 3.6.
- [gforcada]
-
-- Search configuration on home folder.
- [gforcada]
-
-2.1.3 (2016-11-25)
-------------------
-
-- Fix yet another corner case.
- [gforcada]
-
-2.1.2 (2016-11-25)
-------------------
-
-- Fix another corner case: ignored files.
- [cas--]
-
-2.1.1 (2016-11-25)
-------------------
-
-- Fix corner cases of isort: newlines and grouped imports.
- [cas--]
-
-2.1.0 (2016-11-24)
-------------------
-
-- Show the exact line and kind of error,
- rather than a generic message.
- [cas--]
-
-2.0.3 (2016-11-22)
-------------------
-
-- Update trove classifiers.
- [gforcada]
-
-2.0.2 (2016-11-22)
-------------------
-
-- Add flake8 classifier.
- [sigmavirus24]
-
-- Require flake8 3.2.1.
- flake8 series 3.1.x and 3.2.0 where not reporting flake8-isort errors.
- [gforcada]
-
-- Test on pypy and pypy3.
- [gforcada]
-
-- Fix tests and formatting.
- [gforcada]
-
-2.0.1 (2016-09-22)
-------------------
-
-- Fix standard input processing.
- [carljm]
-
-
-2.0 (2016-09-14)
-----------------
-
-- Refactor code to handle flake8 version 3.
- [danpalmer]
-
-- Require flake8 version 3.0.
- [gforcada]
-
-1.3 (2016-06-20)
-----------------
-
-- Make error messages clearer.
- [do3cc]
-
-- Use either pep8 or pycodestyle (new name for pep8).
- [Maxim Novikov]
-
-- Fix coveralls.
- [gforcada]
-
-1.2 (2016-03-05)
-----------------
-- Allow stdin processing, this way text editor can pass input to flake8.
- [mjacksonw]
-
-1.1.1 (2016-02-16)
-------------------
-- Silence isort messages.
- [gforcada]
-
-- Improve wording.
- [gforcada]
-
-1.1 (2016-02-16)
-----------------
-- Check for isort configuration on setup.cfg as well.
- [plumdog]
-
-1.0 (2015-12-16)
-----------------
-- Check for an isort configuration file.
- [gforcada]
-
-0.2 (2015-09-14)
-----------------
-- Fix entry point.
- [gforcada]
-
-0.1.post0 (2015-09-13)
-----------------------
-- Release wheels as well.
- [gforcada]
-
-0.1 (2015-09-13)
-----------------
-- Initial release
- [gforcada]
-
-- Add all boilerplate files.
- [gforcada]
-
-- Create the flake8 plugin per se.
- [gforcada]
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/PKG-INFO
new/flake8_isort-7.1.0/PKG-INFO
--- old/flake8_isort-7.0.0/PKG-INFO 2020-02-02 01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/PKG-INFO 2020-02-02 01:00:00.000000000 +0100
@@ -1,10 +1,10 @@
-Metadata-Version: 2.4
+Metadata-Version: 2.5
Name: flake8-isort
-Version: 7.0.0
+Version: 7.1.0
Summary: flake8 plugin that integrates isort
Project-URL: Homepage, https://github.com/gforcada/flake8-isort
Project-URL: Bug Tracker, https://github.com/gforcada/flake8-isort/issues
-Project-URL: Changelog,
https://github.com/gforcada/flake8-isort/blob/main/CHANGES.rst
+Project-URL: Changelog,
https://github.com/gforcada/flake8-isort/blob/main/CHANGES.md
Author-email: Gil Forcada Codinachs <[email protected]>
License: GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
@@ -352,94 +352,89 @@
Classifier: Framework :: Flake8
Classifier: Framework :: Plone
Classifier: Intended Audience :: Developers
-Classifier: License :: OSI Approved :: GNU General Public License v2 (GPLv2)
Classifier: Operating System :: OS Independent
Classifier: Programming Language :: Python
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3 :: Only
-Classifier: Programming Language :: Python :: 3.10
Classifier: Programming Language :: Python :: 3.11
Classifier: Programming Language :: Python :: 3.12
Classifier: Programming Language :: Python :: 3.13
Classifier: Programming Language :: Python :: 3.14
+Classifier: Programming Language :: Python :: 3.15
Classifier: Programming Language :: Python :: Implementation :: CPython
Classifier: Programming Language :: Python :: Implementation :: PyPy
Classifier: Topic :: Software Development
Classifier: Topic :: Software Development :: Quality Assurance
-Requires-Python: >=3.10
+Requires-Python: >=3.11
Requires-Dist: flake8
Requires-Dist: isort>=5.0.0
Provides-Extra: test
Requires-Dist: pytest; extra == 'test'
-Description-Content-Type: text/x-rst
+Description-Content-Type: text/markdown
-.. -*- coding: utf-8 -*-
+# Flake8 meet isort
-.. image::
https://github.com/gforcada/flake8-isort/actions/workflows/tests.yml/badge.svg?branch=main
- :target:
https://github.com/gforcada/flake8-isort/actions/workflows/tests.yml
+Use [isort](https://pypi.org/project/isort) to check
+if the imports on your python files are sorted the way you expect.
-.. image::
https://coveralls.io/repos/gforcada/flake8-isort/badge.svg?branch=main
- :target: https://coveralls.io/github/gforcada/flake8-isort?branch=main
+Add an `.isort.cfg` configuration file to define
+how you want your imports sorted and run `flake8` as you usually do.
-Flake8 meet isort
-=================
-Use `isort`_ to check if the imports on your python files are sorted the way
you expect.
+See [isort
documentation](https://pycqa.github.io/isort/docs/configuration/options.html)
+for `.isort.cfg` available options.
-Add an ``.isort.cfg`` to define how you want your imports sorted and run
flake8 as you usually do.
+## Install
-See `isort documentation`_ for ``.isort.cfg`` available options.
+Install with pip:
-Install
--------
-Install with pip::
+```shell
+pip install flake8-isort
+```
- $ pip install flake8-isort
+Install with conda:
-Install with conda::
+```shell
+conda install -c conda-forge flake8-isort
+```
- $ conda install -c conda-forge flake8-isort
+## Configuration
+If using the `select` [option from
flake8](http://flake8.pycqa.org/en/latest/user/options.html#cmdoption-flake8-select)
+be sure to enable the `I` category as well,
+see below for the specific error codes reported by `flake8-isort`.
-Configuration
--------------
-If using the `select` `option from flake8`_ be sure to enable the `I` category
as well, see below for the specific error codes reported by `flake8-isort`.
+See `flake8 --help` for available `flake8-isort` options.
-See ``flake8 --help`` for available flake8-isort options.
+## Error codes
-Error codes
------------
-+------------+-----------------------------------------------------------+
| Error code | Description |
-+============+===========================================================+
+|------------|-----------------------------------------------------------|
| I001 | isort found an import in the wrong position |
-+------------+-----------------------------------------------------------+
| I002 | no configuration found (.isort.cfg or [isort] in configs) |
-+------------+-----------------------------------------------------------+
| I003 | isort expected 1 blank line in imports, found 0 |
-+------------+-----------------------------------------------------------+
| I004 | isort found an unexpected blank line in imports |
-+------------+-----------------------------------------------------------+
| I005 | isort found an unexpected missing import |
-+------------+-----------------------------------------------------------+
-Requirements
-------------
-- Python 3.9, 3.10, 3.11, 3.12, 3.13 and pypy3
+## Requirements
+
+- Python 3.1+ and pypy3
- flake8
- isort
-Relation to flake8-import-order
--------------------------------
+## Relation to flake8-import-order
-As an alternative to this flake8 plugin, there's `flake8-import-order`_ that
could be worth checking out. In contrast to this plugin that defers all logic
to isort, the flake8-import-order comes bundled with it's own logic.
+As an alternative to this flake8 plugin, there's
[flake8-import-order](https://pypi.org/project/flake8-import-order)
+that could be worth checking out.
+In contrast to this plugin that defers all logic to isort,
+the flake8-import-order comes bundled with it's own logic.
+
+`flake8-import-order` comes with a few predefined set of styles
+meanwhile this plugin can be customized a bit more.
+But the biggest difference could lie in that `flake8-isort`
+actually has the corresponding sorting engine isort
+that can sort the import orders of your existing python files.
+Meanwhile `flake8-import-order` has no such corresponding tool.
-flake8-import-order comes with a few predefined set of styles meanwhile this
plugin can be customized a bit more. But the biggest difference could lie in
that flake8-isort actually has the corresponding sorting engine isort that can
sort the import orders of your existing python files. Meanwhile
flake8-import-order has no such corresponding tool, hence big existing projects
who want to adopt either would get a more automized experience choosing
flake8-isort.
+## License
-License
--------
GPL 2.0
-
-.. _`isort`: https://pypi.python.org/pypi/isort
-.. _`isort documentation`:
https://pycqa.github.io/isort/docs/configuration/options.html
-.. _`flake8-import-order`: https://pypi.python.org/pypi/flake8-import-order
-.. _`option from flake8`:
http://flake8.pycqa.org/en/latest/user/options.html#cmdoption-flake8-select
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/README.md
new/flake8_isort-7.1.0/README.md
--- old/flake8_isort-7.0.0/README.md 1970-01-01 01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/README.md 2020-02-02 01:00:00.000000000 +0100
@@ -0,0 +1,66 @@
+# Flake8 meet isort
+
+Use [isort](https://pypi.org/project/isort) to check
+if the imports on your python files are sorted the way you expect.
+
+Add an `.isort.cfg` configuration file to define
+how you want your imports sorted and run `flake8` as you usually do.
+
+See [isort
documentation](https://pycqa.github.io/isort/docs/configuration/options.html)
+for `.isort.cfg` available options.
+
+## Install
+
+Install with pip:
+
+```shell
+pip install flake8-isort
+```
+
+Install with conda:
+
+```shell
+conda install -c conda-forge flake8-isort
+```
+
+## Configuration
+
+If using the `select` [option from
flake8](http://flake8.pycqa.org/en/latest/user/options.html#cmdoption-flake8-select)
+be sure to enable the `I` category as well,
+see below for the specific error codes reported by `flake8-isort`.
+
+See `flake8 --help` for available `flake8-isort` options.
+
+## Error codes
+
+| Error code | Description |
+|------------|-----------------------------------------------------------|
+| I001 | isort found an import in the wrong position |
+| I002 | no configuration found (.isort.cfg or [isort] in configs) |
+| I003 | isort expected 1 blank line in imports, found 0 |
+| I004 | isort found an unexpected blank line in imports |
+| I005 | isort found an unexpected missing import |
+
+## Requirements
+
+- Python 3.1+ and pypy3
+- flake8
+- isort
+
+## Relation to flake8-import-order
+
+As an alternative to this flake8 plugin, there's
[flake8-import-order](https://pypi.org/project/flake8-import-order)
+that could be worth checking out.
+In contrast to this plugin that defers all logic to isort,
+the flake8-import-order comes bundled with it's own logic.
+
+`flake8-import-order` comes with a few predefined set of styles
+meanwhile this plugin can be customized a bit more.
+But the biggest difference could lie in that `flake8-isort`
+actually has the corresponding sorting engine isort
+that can sort the import orders of your existing python files.
+Meanwhile `flake8-import-order` has no such corresponding tool.
+
+## License
+
+GPL 2.0
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/README.rst
new/flake8_isort-7.1.0/README.rst
--- old/flake8_isort-7.0.0/README.rst 2020-02-02 01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/README.rst 1970-01-01 01:00:00.000000000 +0100
@@ -1,70 +0,0 @@
-.. -*- coding: utf-8 -*-
-
-.. image::
https://github.com/gforcada/flake8-isort/actions/workflows/tests.yml/badge.svg?branch=main
- :target:
https://github.com/gforcada/flake8-isort/actions/workflows/tests.yml
-
-.. image::
https://coveralls.io/repos/gforcada/flake8-isort/badge.svg?branch=main
- :target: https://coveralls.io/github/gforcada/flake8-isort?branch=main
-
-Flake8 meet isort
-=================
-Use `isort`_ to check if the imports on your python files are sorted the way
you expect.
-
-Add an ``.isort.cfg`` to define how you want your imports sorted and run
flake8 as you usually do.
-
-See `isort documentation`_ for ``.isort.cfg`` available options.
-
-Install
--------
-Install with pip::
-
- $ pip install flake8-isort
-
-Install with conda::
-
- $ conda install -c conda-forge flake8-isort
-
-
-Configuration
--------------
-If using the `select` `option from flake8`_ be sure to enable the `I` category
as well, see below for the specific error codes reported by `flake8-isort`.
-
-See ``flake8 --help`` for available flake8-isort options.
-
-Error codes
------------
-+------------+-----------------------------------------------------------+
-| Error code | Description |
-+============+===========================================================+
-| I001 | isort found an import in the wrong position |
-+------------+-----------------------------------------------------------+
-| I002 | no configuration found (.isort.cfg or [isort] in configs) |
-+------------+-----------------------------------------------------------+
-| I003 | isort expected 1 blank line in imports, found 0 |
-+------------+-----------------------------------------------------------+
-| I004 | isort found an unexpected blank line in imports |
-+------------+-----------------------------------------------------------+
-| I005 | isort found an unexpected missing import |
-+------------+-----------------------------------------------------------+
-
-Requirements
-------------
-- Python 3.9, 3.10, 3.11, 3.12, 3.13 and pypy3
-- flake8
-- isort
-
-Relation to flake8-import-order
--------------------------------
-
-As an alternative to this flake8 plugin, there's `flake8-import-order`_ that
could be worth checking out. In contrast to this plugin that defers all logic
to isort, the flake8-import-order comes bundled with it's own logic.
-
-flake8-import-order comes with a few predefined set of styles meanwhile this
plugin can be customized a bit more. But the biggest difference could lie in
that flake8-isort actually has the corresponding sorting engine isort that can
sort the import orders of your existing python files. Meanwhile
flake8-import-order has no such corresponding tool, hence big existing projects
who want to adopt either would get a more automized experience choosing
flake8-isort.
-
-License
--------
-GPL 2.0
-
-.. _`isort`: https://pypi.python.org/pypi/isort
-.. _`isort documentation`:
https://pycqa.github.io/isort/docs/configuration/options.html
-.. _`flake8-import-order`: https://pypi.python.org/pypi/flake8-import-order
-.. _`option from flake8`:
http://flake8.pycqa.org/en/latest/user/options.html#cmdoption-flake8-select
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/pyproject.toml
new/flake8_isort-7.1.0/pyproject.toml
--- old/flake8_isort-7.0.0/pyproject.toml 2020-02-02 01:00:00.000000000
+0100
+++ new/flake8_isort-7.1.0/pyproject.toml 2020-02-02 01:00:00.000000000
+0100
@@ -4,31 +4,30 @@
[project]
name = "flake8-isort"
-version = "7.0.0"
+version = "7.1.0"
authors = [
{ name="Gil Forcada Codinachs", email="[email protected]" },
]
description = "flake8 plugin that integrates isort"
keywords = ["pep8", "flake8", "python", "isort", "imports"]
license = {file = "LICENSE"}
-readme = "README.rst"
-requires-python = ">=3.10"
+readme = "README.md"
+requires-python = ">=3.11"
classifiers = [
"Development Status :: 5 - Production/Stable",
"Environment :: Console",
"Framework :: Flake8",
'Framework :: Plone',
"Intended Audience :: Developers",
- "License :: OSI Approved :: GNU General Public License v2 (GPLv2)",
"Operating System :: OS Independent",
"Programming Language :: Python",
"Programming Language :: Python :: 3",
"Programming Language :: Python :: 3 :: Only",
- "Programming Language :: Python :: 3.10",
"Programming Language :: Python :: 3.11",
"Programming Language :: Python :: 3.12",
"Programming Language :: Python :: 3.13",
"Programming Language :: Python :: 3.14",
+ "Programming Language :: Python :: 3.15",
"Programming Language :: Python :: Implementation :: CPython",
"Programming Language :: Python :: Implementation :: PyPy",
"Topic :: Software Development",
@@ -39,7 +38,7 @@
[project.urls]
"Homepage" = "https://github.com/gforcada/flake8-isort";
"Bug Tracker" = "https://github.com/gforcada/flake8-isort/issues";
-"Changelog" = "https://github.com/gforcada/flake8-isort/blob/main/CHANGES.rst";
+"Changelog" = "https://github.com/gforcada/flake8-isort/blob/main/CHANGES.md";
[project.optional-dependencies]
test = ["pytest"]
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/run_tests.py
new/flake8_isort-7.1.0/run_tests.py
--- old/flake8_isort-7.0.0/run_tests.py 2020-02-02 01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/run_tests.py 2020-02-02 01:00:00.000000000 +0100
@@ -174,7 +174,7 @@
if 'config' in testcase:
write_isort_cfg(tmpdir, testcase['config'])
if mode == 'file':
- (file_path, lines) = write_python_file(tmpdir, testcase['code'])
+ file_path, lines = write_python_file(tmpdir, testcase['code'])
checker = Flake8Isort(None, file_path, lines)
elif mode == 'code_string':
source = textwrap.dedent(testcase['code'])
@@ -188,7 +188,7 @@
from sys import pid
import threading
"""
- (file_path, lines) = write_python_file(tmpdir, source)
+ file_path, lines = write_python_file(tmpdir, source)
write_isort_cfg(tmpdir, 'force_single_line=True')
checker = Flake8Isort(None, file_path, lines)
checker.config_file = True
@@ -197,7 +197,7 @@
def test_isortcfg_not_found(tmpdir):
- (file_path, lines) = write_python_file(tmpdir, 'from sys import pid, path')
+ file_path, lines = write_python_file(tmpdir, 'from sys import pid, path')
checker = Flake8Isort(None, file_path, lines)
checker.search_current = False
checker.config_file = True
@@ -221,7 +221,7 @@
],
)
- (file_path, lines) = write_python_file(tmpdir, source)
+ file_path, lines = write_python_file(tmpdir, source)
diff = ' from __future__ import division\n+\n import os'
@@ -243,7 +243,7 @@
import os
from sys import path
"""
- (file_path, lines) = write_python_file(
+ file_path, lines = write_python_file(
tmpdir,
source,
)
@@ -258,7 +258,7 @@
from flake8.main import cli
import sys
- (file_path, lines) = write_python_file(tmpdir, 'from sys import pid, path')
+ file_path, lines = write_python_file(tmpdir, 'from sys import pid, path')
sys.argv = sys.argv[:2]
try:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/flake8_isort-7.0.0/tox.ini
new/flake8_isort-7.1.0/tox.ini
--- old/flake8_isort-7.0.0/tox.ini 2020-02-02 01:00:00.000000000 +0100
+++ new/flake8_isort-7.1.0/tox.ini 2020-02-02 01:00:00.000000000 +0100
@@ -4,11 +4,11 @@
format
lint
coverage
- py310
py311
py312
py313
py314
+ py315
pypy3
[testenv:test]
@@ -25,19 +25,19 @@
description = automatically reformat code
skip_install = true
deps =
- pre-commit
+ prek
commands =
- pre-commit run -a pyupgrade
- pre-commit run -a isort
- pre-commit run -a black
+ prek run -a pyupgrade
+ prek run -a isort
+ prek run -a black
[testenv:lint]
description = run linters that will help improve the code style
skip_install = true
deps =
- pre-commit
+ prek
commands =
- pre-commit run -a
+ prek run -a
[testenv:coverage]
description = get a test coverage report
