Script 'mail_helper' called by obssrc
Hello community,

here is the log from the commit of package netbird for openSUSE:Factory checked 
in at 2026-11-16 10:11:12
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/netbird (Old)
 and      /work/SRC/openSUSE:Factory/.netbird.new.1251 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Package is "netbird"

Mon Nov 16 10:11:12 2026 rev:54 rq:1397803 version:0.83.1

Changes:
--------
--- /work/SRC/openSUSE:Factory/netbird/netbird.changes  2026-10-29 
20:05:10.815312098 +0100
+++ /work/SRC/openSUSE:Factory/.netbird.new.1251/netbird.changes        
2026-11-16 10:11:40.081703023 +0100
@@ -1,0 +2,226 @@
+Fri Nov 13 22:36:22 UTC 2026 - Holden Fried <[email protected]>
+
+- Refresh service-install-change.patch
+
+- Comment out skip-ui.patch from series for now
+  * It may prove untenable to maintain the new netbird wails GUI
+    over time, so I want to keep things in place to fall back easily
+    if needed, while still leaving the build in a somewhat sane and
+    obvious state.
+
+- New failing test disabled--incompatible with OBS:
+  * TestDaemonConnectError_KeepsServiceHintOtherwise
+
+- Renamed GUI package from netbird-applet to netbird-ui to align
+  with upstream--makes sense to do it now that we're reenabling with
+  the new full-featured UI
+  * Also keep netbird-applet package obsoleted just in case, since
+    it will conflict with netbird-ui (binary in both cases is named
+    netbird-ui)--netbird-applet has already been "obsoleted" since
+    v0.76.1, when the new UI initially had to be disabled due to
+    build failures
+
+-------------------------------------------------------------------
+Fri Nov 13 19:36:23 UTC 2026 - Holden Fried <[email protected]>
+
+- Update to 0.83.1:
+  * 499a86f [client] Fall back during user lookup on windows (#8591)
+
+- Update to 0.83.0:
+
+  Maintainer comment:
+  - Lots of formatting and links to new documentation in this
+    version. Highly recommend visiting the upstream release notes
+    for details: 
+    * https://github.com/netbirdio/netbird/releases/tag/v0.83.0
+
+  โš ๏ธ Breaking changes: profile ownership and daemon access
+    control
+
+  - Each profile now has an owner, and local users can control only
+    their own profiles as the daemon has a new IPC authorization
+    layer. Single-user desktops and headless peers registered with
+    a setup key and auto-start (the default) need no action. They
+    reconnect on their own after the upgrade. Act only if one of
+    the cases below applies to you. #7407 Who is affected      Impact
+    What to do You connect to the daemon with --daemon-addr tcp://โ€ฆ
+    The daemon refuses all TCP requests.       Before upgrading, switch
+    to the default Unix socket or Windows named pipe. ๐Ÿ“– TCP
+    sockets A regular user or script runs netbird commands on a
+    headless machine (no console login, SSH and RDP don't count)
+    Commands fail because nobody owns the default profile.     Run
+    sudo netbird up once, or run sudo netbird profile claim default
+    --owner <user>. ๐Ÿ“– Headless setup Several local users use
+    NetBird on one machine     Users see and control only their own
+    profiles. Profiles added with sudo belong to root.         Add
+    profiles as the user who will use them. To share a profile, set
+    NB_DISABLE_PROFILE_OWNERSHIP=true (see below). ๐Ÿ“– Share a
+    profile
+
+  - Existing profiles migrate automatically on the first start. ๐Ÿ“–
+    Upgrade from an earlier version
+
+  - New: To limit daemon access to one group, use netbird service
+    install --allow-group <group>. ๐Ÿ“– Restrict daemon access
+
+  - Opting out: Set these variables with netbird service install
+    --service-env โ€ฆ: Variable  Effect
+    NB_DISABLE_PROFILE_OWNERSHIP=true  Turns ownership off, so all
+    local users share all profiles. Use it together with
+    --allow-group. NB_DISABLE_DEFAULT_PROFILE_CLAIM=true       Leaves
+    the default profile without an owner until an administrator
+    claims it. Recommended on servers.
+
+  - ๐Ÿ“– Profile ownership and daemon access ยท Troubleshooting
+    Highlights
+
+  ๐Ÿค– Manage NetBird from AI agents with the MCP server
+
+  - Management can now serve its REST API as a Model Context
+    Protocol server at /api/mcp, so AI agents such as Claude Code
+    can manage a NetBird account with the same permissions as the
+    user they act for. Every tool is one REST operation run
+    in-process against the API, so a tool call goes through the
+    same handler and permission checks and returns the same JSON as
+    the REST call. Tools only act on the caller's own account, and
+    update_* tools are marked destructive.
+
+  - Clients sign in with OAuth: management runs its own OAuth 2.1
+    authorization server, sends the user to the configured identity
+    provider to log in, and issues tokens that are accepted only on
+    /api/mcp. Personal access tokens work too. On the consent page,
+    write access is unticked by default, so a connection is
+    read-only unless the user ticks Make changes. Sign-ins,
+    sign-outs and sessions revoked after token reuse are recorded
+    in the activity log.
+
+  - The MCP server is off unless NB_MCP_ENABLED=true is set on
+    management; NB_MCP_TOOLS narrows the list of tools. Self-hosted
+    installs with the embedded IdP need nothing else, since the
+    broker's callback is added to the Dex clients on restart.
+    mcp-consent
+
+  - ๐Ÿ“– MCP server ยท Sign in with OAuth ยท Self-hosted setup ยท #8335,
+    #8334, #8502, #8499, #8498 ๐Ÿ›ก๏ธ CrowdSec AppSec for the dashboard
+    and API during self-hosted install
+
+  - The self-hosted installers now offer CrowdSec AppSec once
+    Traefik, the NetBird Proxy and CrowdSec are enabled. When
+    enabled, it protects the dashboard, /api and /oauth2; relay,
+    gRPC, WebSocket relay paths and services exposed through the
+    NetBird Proxy are not inspected. The option is off by default,
+    because AppSec enforces immediately, blocks protected paths
+    when CrowdSec is unavailable, and can lock out an administrator
+    after repeated rule matches.
+
+  - ๐Ÿ“– Protect the dashboard with CrowdSec AppSec ยท #8341 ๐Ÿ”‘ Keep
+    secrets out of the combined server's config.yaml
+
+  - The combined netbird-server now reads the relay auth secret
+    from NB_AUTH_SECRET and the store encryption key from
+    NB_STORE_ENCRYPTION_KEY. A non-empty variable overrides the
+    value in config.yaml, so the file can live in git without
+    secrets. Values are never logged; the startup log names only
+    the variable. configure.sh also no longer clears an existing
+    DataStoreEncryptionKey.
+
+  - On self-hosted Enterprise, keep the store encryption key in
+    config.yaml and do not set NB_STORE_ENCRYPTION_KEY: the
+    Enterprise server requires the key in the file, and its
+    integrations read only that copy. Earlier versions ignore both
+    variables, so do not remove a secret from config.yaml before
+    the server runs v0.83.0.
+
+  - ๐Ÿ“– Keeping secrets out of the config file ยท Combined server
+    variables ยท #8405, #5258 What's New ๐Ÿ”’ Security and Access
+    Control
+
+    Scoped group resource references to the owning account. #8474
+
+  - ๐Ÿ–ฅ๏ธ Client Improvements
+
+    Sent the relay hostname as Host when dialing a relay by IP.
+    #8359 Let Signal register behind proxies that hold headers
+    until the first message. #8380 Started the update manager when
+    management forces an update. #8232
+
+  - ๐Ÿ“ฑ Mobile
+
+    Preserved iOS credentials when login checks cannot reach
+    management. #8202 Reported network loss on iOS through the
+    existing recovery callback. #7716 Stopped waiting for the utun
+    interface to be removed on iOS engine stop. #8471 Added
+    RefreshWireGuardStats to the iOS SDK. #8509
+
+  - โš™๏ธ Management Improvements
+
+    Skipped writes and network map updates for objects that did not
+    change. #8404 Batched peer disconnects and made reconnects
+    lock-free. #8373 Moved peer connection state into separate
+    tables; a database migration runs on the first start after the
+    upgrade. #8426 Added a configurable statement and transaction
+    timeout for the PostgreSQL store, set with
+    NB_STORE_STATEMENT_TIMEOUT and NB_STORE_TRANSACTION_TIMEOUT.
+    #8381 Added a hard deadline to the update debouncer, so pending
+    network map updates are always sent. #8437 Used the peer's
+    last-seen time to detect stale connected statuses. #7268
+    Stopped peer expiration jobs when expiration is disabled for
+    the account. #8521 Limited the store calls made for resource
+    policies. #8522
+
+  - ๐Ÿ”€ Reverse Proxy
+
+    Attributed agent network errors in the access logs: a failed
+    request now records whether a policy, a global limit, the
+    provider, the proxy or authentication caused it. #8460 Kept
+    gateway refusals out of the agent network log and named NetBird
+    in deny messages. #8575 Reported LLM token usage as metrics.
+    #8481
+
+  - ๐Ÿ—๏ธ Infrastructure and CI
+
+    Fixed the Enterprise migration when the secret comes from the
+    environment. #8436 Moved the combined server's config onto a
+    shared Viper-based loader; behavior is unchanged, values still
+    come from the file and defaults. #8108 Built releases from the
+    pushed tag instead of GoReleaser's guess. #8427 Made the
+    skip-latest tests independent of their environment. #8468
+    Stopped dispatching the mobile client submodule bumps on
+    release tags. #8347
+
+  - ๐Ÿ“ Misc
+
+    Expanded the repository's contribution guidance. #7946
+
+  - Dashboard (v2.97.0)
+
+    Reshaped the sidebar: Control Center, Peers, Users and Groups
+    at the top; Networking and Agent Network as collapsible
+    sections; Settings, Tenants, Integrations and Audit Events
+    under Account. Users and Service Users are now tabs, and Agent
+    Network policies are renamed Agent Policies. dashboard#892
+    Showed what failed an agent network request in the REASON
+    column of the access logs (needs management v0.83.0).
+    dashboard#884 Added a sync interval setting to EDR
+    integrations. dashboard#865 Allowed single-label domains for
+    network resources and peer DNS domains. dashboard#670,
+    dashboard#883 Sized table columns by content and shared spare
+    width evenly. dashboard#886 Kept the default WASM client from
+    moving backwards. dashboard#885 Pointed the IdP sync callout to
+    the docs and added Discord under Help. dashboard#881,
+    dashboard#890 Fixed the white outline flashing on modals after
+    the Tailwind v4 upgrade. dashboard#882
+
+
+-------------------------------------------------------------------
+Sun Nov  1 05:56:08 UTC 2026 - Holden Fried <[email protected]>
+
+- Fix new netbird Wails UI so we can actually build it (thanks to
+  Johannes Kastl, whose builds I looked to for inspiration)
+
+-------------------------------------------------------------------
+Sat Oct 31 21:30:24 UTC 2026 - Holden Fried <[email protected]>
+
+- Add new nblink subpackage and associated completions
+
+-------------------------------------------------------------------

Old:
----
  netbird-0.82.0.obscpio

New:
----
  Makefile
  PACKAGING_README.md
  frontend-0.83.1.tar.zst
  netbird-0.83.1.obscpio
  prepare_webassets.sh

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Other differences:
------------------
++++++ netbird.spec ++++++
--- /var/tmp/diff_new_pack.fUc0Tk/_old  2026-11-16 10:11:44.242879590 +0100
+++ /var/tmp/diff_new_pack.fUc0Tk/_new  2026-11-16 10:11:44.244879675 +0100
@@ -17,10 +17,13 @@
 
 
 %ifnarch %{ix86}
-%bcond_with netbird_ui
+# leap <16.0 doesn't have gtk4 version required
+%if 0%{?suse_version} >= 1600
+%bcond_without netbird_ui
 %else
 %bcond_with netbird_ui
 %endif
+%endif
 
 %if 0%{?sle_version} <= 150600 && !0%{?is_opensuse}
 %bcond_without appindicator_sle
@@ -32,7 +35,7 @@
 %bcond_with stub_config
 
 Name:           netbird
-Version:        0.82.0
+Version:        0.83.1
 Release:        0
 Summary:        Mesh VPN based on WireGuard
 License:        AGPL-3.0-only AND BSD-3-Clause
@@ -42,10 +45,15 @@
 Source2:        %{name}.service
 Source3:        %{name}-management.service
 Source4:        %{name}-signal.service
-Source5:        series
+Source5:        frontend-%{version}.tar.zst
+Source6:        prepare_webassets.sh
+Source7:        Makefile
+Source8:        PACKAGING_README.md
+Source9:        series
+# If we need to fall back to skipping the UI, change skip-ui.patch back to 
Patch1
+Source98:       skip-ui.patch
 Source99:       update.sh
 Patch0:         service-install-cli-change.patch
-Patch1:         skip-ui.patch
 BuildRequires:  fdupes
 BuildRequires:  fish
 BuildRequires:  git-core
@@ -60,7 +68,9 @@
 BuildRequires:  pkgconfig(libpcap)
 # For GUI applet
 %if %{with netbird_ui}
-BuildRequires:  pkgconfig(xxf86vm)
+# for old appindicator version, don't think it's still required with newer ui
+# BuildRequires:  pkgconfig(xxf86vm)
+BuildRequires:  pkgconfig(webkitgtk-6.0)
 %if %{with appindicator_sle}
 BuildRequires:  pkgconfig(appindicator3-0.1)
 %else
@@ -68,9 +78,11 @@
 %endif
 BuildRequires:  hicolor-icon-theme
 %endif
-%if %{without netbird_ui}
-Obsoletes:      netbird-applet < %{version}-%{release}
-%endif
+# If UI becomes too cumbersome and we need to fall back, uncomment/remove 
macro escapes
+# %%if %%{without netbird_ui}
+# Obsoletes:      netbird-applet < %%{version}-%%{release}
+# Obsoletes:      netbird-ui < %%{version}-%%{release}
+# %%endif
 
 %description
 NetBird combines a configuration-free peer-to-peer private network and a
@@ -78,12 +90,15 @@
 create secure private networks for your organization or home.
 
 %if %{with netbird_ui}
-%package applet
-Summary:        Optional UI panel indicator for %{name}
+%package ui
+Summary:        Optional new Wails GUI (and panel indicator) for %{name}
 Requires:       %{name}
+# For new netbird-ui package, we need to obsolete the old netbird-applet 
package
+Obsoletes:      %{name}-applet < %{version}
+Provides:       %{name}-applet = %{version}
 
-%description applet
-Optional UI panel indicator for %{name}.
+%description ui
+Optional GUI and panel indicator for %{name}.
 %endif
 
 %package management
@@ -110,6 +125,19 @@
 comprise a full netbird backend server, and is merely built for convenience.
 Management/signal/relay are not required for the netbird client application.
 
+%package nblink
+Summary:        Standalone userspace port forwarder for %{name}
+
+%description nblink
+nblink is a new standalone binary that forwards local ports into your NetBird
+network from an ordinary, unprivileged process. It runs the client in
+userspace mode, so there is no TUN device, no root, no installer, and
+/etc/resolv.conf is never touched. Names on the upstream side resolve inside
+the tunnel. It is built for places the regular agent cannot run: managed
+laptops without admin rights, rootless containers on OpenShift and Podman, CI
+jobs, MCP servers and local AI agents that need an internal API, and sidecars
+for apps that hardcode an HTTP endpoint.
+
 %package bash-completion
 Summary:        Bash Completion for %{name}
 Requires:       %{name}
@@ -142,8 +170,8 @@
 
 %package management-bash-completion
 Summary:        Bash Completion for %{name}
+Requires:       %{name}-management
 Requires:       bash-completion
-Requires:       netbird-management
 Supplements:    (%{name}-management and bash-completion)
 BuildArch:      noarch
 
@@ -152,8 +180,8 @@
 
 %package management-fish-completion
 Summary:        Fish Completion for %{name}-management
+Requires:       %{name}-management
 Requires:       fish
-Requires:       netbird-management
 Supplements:    (%{name}-management and fish)
 BuildArch:      noarch
 
@@ -162,7 +190,7 @@
 
 %package management-zsh-completion
 Summary:        Zsh Completion for %{name}-management
-Requires:       netbird-management
+Requires:       %{name}-management
 Requires:       zsh
 Supplements:    (%{name}-management and zsh)
 BuildArch:      noarch
@@ -172,8 +200,8 @@
 
 %package signal-bash-completion
 Summary:        Bash Completion for %{name}-management
+Requires:       %{name}-signal
 Requires:       bash-completion
-Requires:       netbird-signal
 Supplements:    (%{name}-signal and bash-completion)
 BuildArch:      noarch
 
@@ -182,8 +210,8 @@
 
 %package signal-fish-completion
 Summary:        Fish Completion for %{name}-signal
+Requires:       %{name}-signal
 Requires:       fish
-Requires:       netbird-signal
 Supplements:    (%{name}-signal and fish)
 BuildArch:      noarch
 
@@ -192,7 +220,7 @@
 
 %package signal-zsh-completion
 Summary:        Zsh Completion for %{name}-signal
-Requires:       netbird-signal
+Requires:       %{name}-signal
 Requires:       zsh
 Supplements:    (%{name}-signal and zsh)
 BuildArch:      noarch
@@ -200,8 +228,40 @@
 %description signal-zsh-completion
 Zsh command line completion support for %{name}-signal.
 
+%package nblink-bash-completion
+Summary:        Bash Completion for nblink
+Requires:       %{name}-nblink
+Requires:       bash-completion
+Supplements:    (%{name}-nblink and bash-completion)
+BuildArch:      noarch
+
+%description nblink-bash-completion
+Bash command line completion support for nblink.
+
+%package nblink-fish-completion
+Summary:        Fish Completion for nblink
+Requires:       %{name}-nblink
+Requires:       fish
+Supplements:    (%{name}-nblink and fish)
+BuildArch:      noarch
+
+%description nblink-fish-completion
+Fish command line completion support for nblink.
+
+%package nblink-zsh-completion
+Summary:        Zsh Completion for nblink
+Requires:       %{name}-nblink
+Requires:       zsh
+Supplements:    (%{name}-nblink and zsh)
+BuildArch:      noarch
+
+%description nblink-zsh-completion
+Zsh command line completion support for nblink.
+
 %prep
 %autosetup -p1 -a1
+rm -rf client/ui/frontend
+tar xvf %{SOURCE5}
 
 %build
 %if %{without netbird_ui}
@@ -221,6 +281,7 @@
 go build -o %{name}-mgmt -buildmode=pie -mod=vendor -ldflags "$LDFLAGS" 
./management
 go build -o %{name}-signal -buildmode=pie -mod=vendor -ldflags "$LDFLAGS" 
./signal
 go build -o %{name}-relay -buildmode=pie -mod=vendor -ldflags "$LDFLAGS" 
./relay
+go build -o nblink -buildmode=pie -mod=vendor -ldflags "$LDFLAGS" 
./client/link/cmd/nblink
 
 %if %{with netbird_ui}
 go build -o %{name}-ui -buildmode=pie -mod=vendor -ldflags "$LDFLAGS" 
./client/ui
@@ -228,12 +289,13 @@
 
 %install
 install -Dm755 -t %{buildroot}%{_bindir} %{name}{,-mgmt,-signal,-relay}
+install -Dm755 -t %{buildroot}%{_bindir} nblink
 
-# Install the applet and the icons, so the desktop file doesn't have an empty 
icon.
+# Install the ui and the icons, so the desktop file doesn't have an empty icon.
 %if %{with netbird_ui}
 install -Dm755 %{name}-ui %{buildroot}%{_bindir}/%{name}-ui
-install -Dm644 client/ui/build/%{name}.desktop 
%{buildroot}%{_datadir}/applications/%{name}.desktop
-# All icons are 256x256. These seem to get pulled into the applet binary 
regardless,
+install -Dm644 client/ui/build/linux/%{name}.desktop 
%{buildroot}%{_datadir}/applications/%{name}.desktop
+# All icons are 256x256. These seem to get pulled into the ui binary 
regardless,
 # but still worth throwing in separately.
 install -dm755 %{buildroot}%{_datadir}/icons/hicolor/256x256/apps
 install -Dm644 client/ui/assets/%{name}*.png 
%{buildroot}%{_datadir}/icons/hicolor/256x256/apps
@@ -242,7 +304,7 @@
 %endif
 
 # Generate completions
-for bin in %{name} %{name}-signal %{name}-mgmt
+for bin in %{name} %{name}-signal %{name}-mgmt nblink
 do
   for sh in bash zsh fish
   do
@@ -353,6 +415,7 @@
   TestLogin_ProfileSwitchRejectsJWTObtainedUnderPreviousConfig
   TestExchangeWithFallback_TCPTruncatesToClientSize
   TestSession_ResizeWhileRunningIsApplied
+  TestDaemonConnectError_KeepsServiceHintOtherwise
 )
 # Assemble skip string by replacing spaces with a pipe.
 disable=$(echo ${failing_tests[*]} | sed 's/ /|/g')
@@ -409,7 +472,7 @@
 %{_unitdir}/%{name}.service
 
 %if %{with netbird_ui}
-%files applet
+%files ui
 %{_bindir}/%{name}-ui
 %{_datadir}/applications/%{name}.desktop
 %{_datadir}/icons/hicolor/256x256/apps/%{name}*.png
@@ -429,6 +492,10 @@
 %license LICENSE
 %{_bindir}/%{name}-relay
 
+%files nblink
+%license LICENSE
+%{_bindir}/nblink
+
 %files bash-completion
 %{_datadir}/bash-completion/completions/%{name}
 
@@ -459,3 +526,13 @@
 %dir %{_datadir}/zsh/site-functions
 %{_datadir}/zsh/site-functions/_%{name}-signal
 
+%files nblink-bash-completion
+%{_datadir}/bash-completion/completions/nblink
+
+%files nblink-fish-completion
+%{_datadir}/fish/vendor_completions.d/nblink.fish
+
+%files nblink-zsh-completion
+%dir %{_datadir}/zsh/site-functions
+%{_datadir}/zsh/site-functions/_nblink
+

++++++ Makefile ++++++
.ONESHELL:
.SILENT: obsservices webassets

NAME = netbird
SPEC = netbird.spec

default: clean obsservices prepare_webassets

clean:
        rm -rf $(NAME) $(NAME)-*.tar $(NAME)-*.tar.gz $(NAME)-*.obscpio 
frontend-*.tar.zst vendor.tar.zst

obsservices:
        echo "##########"
        echo "Running OBS services"
        osc service manualrun

prepare_webassets:
        podman run \
                -ti \
                --rm \
                --pull=always \
                -v .:/data/:Z \
                registry.opensuse.org/opensuse/tumbleweed:20261111 \
                bash /data/prepare_webassets.sh $(NAME) nodejs24

++++++ PACKAGING_README.md ++++++
# Packaging netbird-ui (wails application)

In addition to the source code in the tarball, this package also needs the
assets for the web UI. These can be generated by the `Makefile` that is present
in this package.  To do that, you need to have `make` and `podman` installed
locally.  For the OBS workflow you also need `obs-service-go_modules` as well as
`obs-service-tar_scm` and `obs-service-recompress`.

1. Change the version in the `_service` file
2. Run `make`
3. Create a changelog entry
4. Commit the changes as usual
5. If desired, remove the container image used to build the web assets:

   ```
   podman image rm registry.opensuse.org/opensuse/tumbleweed:latest
   ```

Note that leap would be used here, but it doesn't have the necessary
webkit6/GTK4 libraries, thus necessitating using a tumbleweed snapshot.
I'm not entirely sure how long tumbleweed container images are kept in 
the registry, and pulling :latest is liable to cause issues (it did for me
the first time I tried to build web assets with it). This strategy may be
adjusted slightly in the future. This workaround was shamelessly modified
from ojkastl's woodpecker/other builds (thanks for the inspiration)!

++++++ _service ++++++
--- /var/tmp/diff_new_pack.fUc0Tk/_old  2026-11-16 10:11:44.320882900 +0100
+++ /var/tmp/diff_new_pack.fUc0Tk/_new  2026-11-16 10:11:44.323883028 +0100
@@ -3,18 +3,16 @@
     <param name="url">https://github.com/netbirdio/netbird.git</param>
     <param name="scm">git</param>
     <param name="package-meta">yes</param>
-    <param name="revision">refs/tags/v0.82.0</param>
+    <param name="revision">refs/tags/v0.83.1</param>
     <param name="versionformat">@PARENT_TAG@</param>
     <param name="versionrewrite-pattern">v(.*)</param>
     <param name="changesgenerate">disable</param>
   </service>
   <service name="set_version" mode="manual">
   </service>
-  <!--
   <service name="go_modules" mode="manual">
     <param name="compression">zst</param>
   </service>
-  -->
   <!-- services below are running at buildtime -->
   <service name="tar" mode="buildtime">
   </service>

++++++ netbird-0.82.0.obscpio -> netbird-0.83.1.obscpio ++++++
/work/SRC/openSUSE:Factory/netbird/netbird-0.82.0.obscpio 
/work/SRC/openSUSE:Factory/.netbird.new.1251/netbird-0.83.1.obscpio differ: 
char 49, line 1

++++++ netbird.obsinfo ++++++
--- /var/tmp/diff_new_pack.fUc0Tk/_old  2026-11-16 10:11:44.389885828 +0100
+++ /var/tmp/diff_new_pack.fUc0Tk/_new  2026-11-16 10:11:44.393885998 +0100
@@ -1,5 +1,5 @@
 name: netbird
-version: 0.82.0
-mtime: 1793207865
-commit: 3c00a97878e6af537d28c3bdd4f42cb4286aa883
+version: 0.83.1
+mtime: 1794559587
+commit: 499a86f4bc4795310ead5f06ecd5907e585acef4
 

++++++ prepare_webassets.sh ++++++
#!/bin/bash

set -o pipefail

[[ "$#" == "2" ]] || {
        echo "Please use the package name and the nodejs version as the only 
arguments"
        exit 1
}

package_name="${1}"
nodejs_package="${2}"

cd /data || exit 11

zypper -n install \
    cpio \
    gawk \
    make \
    git-core \
    pnpm \
    go \
    webkitgtk4-devel \
    zstd \
    "${nodejs_package}" || exit 13

version="$( awk '/^Version:/ {print $2;exit;}' "${package_name}.spec" )"


echo "##########"
echo "Package version is $version"
basename="${package_name}-$version"

webassets_tarball="frontend-${version}.tar.zst"
obscpio="$basename.obscpio"
working_directory="$(pwd)"
tmpdir="$(mktemp -d -p /tmp)"
echo "Changing into tmpdir ${tmpdir}"
cd "${tmpdir}" || exit 15

echo "##########"
echo "Extracting obscpio archive"
cpio -id < "${working_directory}/${obscpio}" || exit 21
cd "$basename" || exit 23

echo "##########"
cd client/ui/frontend || exit 25
rm -rf node_modules || exit 27
WAILS_VERSION=$(go list -m -f '{{.Version}}' github.com/wailsapp/wails/v3)
go install github.com/wailsapp/wails/v3/cmd/wails3@$WAILS_VERSION
# ~/go/bin/ not in path by default, and pnpm run bindings calls wails3 to 
generate the bindings
mv /root/go/bin/wails3 /usr/local/bin/
pnpm install --frozen-lockfile --ignore-scripts
pnpm run bindings
pnpm run check
pnpm build
cd ../../.. || exit 29
echo "Creating web assets tarball"
tar -I "zstd -T0" -cvf "${working_directory}/${webassets_tarball}" 
client/ui/frontend

echo "##########"
echo "DONE preparing the webassets"
cd "${working_directory}" || exit 31
rm -rf "$tmpdir"

++++++ series ++++++
--- /var/tmp/diff_new_pack.fUc0Tk/_old  2026-11-16 10:11:44.444888162 +0100
+++ /var/tmp/diff_new_pack.fUc0Tk/_new  2026-11-16 10:11:44.450888417 +0100
@@ -1,3 +1,3 @@
 service-install-cli-change.patch
-skip-ui.patch
+# skip-ui.patch
 

++++++ service-install-cli-change.patch ++++++
--- /var/tmp/diff_new_pack.fUc0Tk/_old  2026-11-16 10:11:44.464889011 +0100
+++ /var/tmp/diff_new_pack.fUc0Tk/_new  2026-11-16 10:11:44.468889181 +0100
@@ -1,51 +1,3 @@
-Index: netbird/client/cmd/login.go
-===================================================================
---- netbird.orig/client/cmd/login.go
-+++ netbird/client/cmd/login.go
-@@ -100,9 +100,16 @@ func doDaemonLogin(ctx context.Context,
-       conn, err := DialClientGRPCServer(ctx, daemonAddr)
-       if err != nil {
-               //nolint
--              return fmt.Errorf("failed to connect to daemon error: %v\n"+
--                      "If the daemon is not running please run: "+
--                      "\nnetbird service install \nnetbird service start\n", 
err)
-+              return fmt.Errorf("failed to connect to daemon error: %v\n\n" +
-+                      "The daemon may not be running. Try restarting the 
service:\n" +
-+                      "    sudo systemctl restart netbird.service\n\n" +
-+                      "To check the service status, use:\n" +
-+                      "    sudo systemctl status netbird.service\n\n" +
-+                      "Unless you are manually overriding with a custom 
drop-in file, " +
-+                      "you should see the default openSUSE service at:\n" +
-+                      "    /usr/lib/systemd/system/netbird.service\n\n" +
-+                      "If you see the service is disabled, you can run:\n" +
-+                      "    sudo systemctl enable netbird.service --now\n", 
err)
-       }
-       defer conn.Close()
- 
-Index: netbird/client/cmd/root.go
-===================================================================
---- netbird.orig/client/cmd/root.go
-+++ netbird/client/cmd/root.go
-@@ -485,9 +485,16 @@ func getClient(cmd *cobra.Command) (*grp
-       conn, err := DialClientGRPCServer(cmd.Context(), daemonAddr)
-       if err != nil {
-               //nolint
--              return nil, fmt.Errorf("failed to connect to daemon error: 
%v\n"+
--                      "If the daemon is not running please run: "+
--                      "\nnetbird service install \nnetbird service start\n", 
err)
-+              return nil, fmt.Errorf("failed to connect to daemon error: 
%v\n\n" +
-+      "the daemon may not be running. try restarting the service:\n" +
-+      "    sudo systemctl restart netbird.service\n\n" +
-+      "To check the service status, use:\n" +
-+      "    sudo systemctl status netbird.service\n\n" +
-+      "Unless you are manually overriding with a custom drop-in file, " +
-+      "you should see the default openSUSE service at:\n" +
-+      "    /usr/lib/systemd/system/netbird.service\n\n" +
-+      "If you see the service is disabled, you can run:\n" +
-+      "    sudo systemctl enable netbird.service --now\n", err)
-       }
- 
-       return conn, nil
 Index: netbird/client/cmd/service_installer.go
 ===================================================================
 --- netbird.orig/client/cmd/service_installer.go
@@ -78,7 +30,7 @@
  // Common service command setup
  func setupServiceCommand(cmd *cobra.Command) error {
        SetFlagsFromEnvVars(rootCmd)
-@@ -131,37 +143,7 @@ var installCmd = &cobra.Command{
+@@ -147,37 +159,7 @@ var installCmd = &cobra.Command{
        Use:   "install",
        Short: "Install NetBird service",
        RunE: func(cmd *cobra.Command, args []string) error {
@@ -117,7 +69,7 @@
        },
  }
  
-@@ -169,35 +151,7 @@ var uninstallCmd = &cobra.Command{
+@@ -185,35 +167,7 @@ var uninstallCmd = &cobra.Command{
        Use:   "uninstall",
        Short: "uninstalls NetBird service from system",
        RunE: func(cmd *cobra.Command, args []string) error {
@@ -154,7 +106,7 @@
        },
  }
  
-@@ -207,64 +161,7 @@ var reconfigureCmd = &cobra.Command{
+@@ -223,64 +177,7 @@ var reconfigureCmd = &cobra.Command{
        Long: `Reconfigures the NetBird service with new settings without 
manual uninstall/install.
  This command will temporarily stop the service, update its configuration, and 
restart it if it was running.`,
        RunE: func(cmd *cobra.Command, args []string) error {
@@ -220,52 +172,28 @@
        },
  }
  
-Index: netbird/client/cmd/status.go
+Index: netbird/client/cmd/daemon_error.go
 ===================================================================
---- netbird.orig/client/cmd/status.go
-+++ netbird/client/cmd/status.go
-@@ -164,9 +164,16 @@ func getStatus(ctx context.Context, full
-       conn, err := DialClientGRPCServer(ctx, daemonAddr)
-       if err != nil {
-               //nolint
--              return nil, fmt.Errorf("failed to connect to daemon error: 
%v\n"+
--                      "If the daemon is not running please run: "+
--                      "\nnetbird service install \nnetbird service start\n", 
err)
-+              return nil, fmt.Errorf("failed to connect to daemon error: 
%v\n\n" +
-+                      "The daemon may not be running. Try restarting the 
service:\n" +
-+                      "    sudo systemctl restart netbird.service\n\n" +
-+                      "To check the service status, use:\n" +
-+                      "    sudo systemctl status netbird.service\n\n" +
-+                      "Unless you are manually overriding with a custom 
drop-in file, " +
-+                      "you should see the default openSUSE service at:\n" +
-+                      "    /usr/lib/systemd/system/netbird.service\n\n" +
-+                      "If you see the service is disabled, you can run:\n" +
-+                      "    sudo systemctl enable netbird.service --now\n", 
err)
+--- netbird.orig/client/cmd/daemon_error.go
++++ netbird/client/cmd/daemon_error.go
+@@ -24,9 +24,16 @@ func daemonConnectError(err error) error
+               return err
        }
-       defer conn.Close()
+       // nolint
+-      return fmt.Errorf("failed to connect to daemon error: %w\n"+
+-              "If the daemon is not running please run: "+
+-              "\nnetbird service install \nnetbird service start\n", err)
++      return fmt.Errorf("failed to connect to daemon error: %v\n\n" +
++      "The daemon may not be running. Try restarting the service:\n" +
++      "    sudo systemctl restart netbird.service\n\n" +
++      "To check the service status, use:\n" +
++      "    sudo systemctl status netbird.service\n\n" +
++      "Unless you are manually overriding with a custom drop-in file, " +
++      "you should see the default openSUSE service at:\n" +
++      "    /usr/lib/systemd/system/netbird.service\n\n" +
++      "If you see the service is disabled, you can run:\n" +
++      "    sudo systemctl enable netbird.service --now\n", err)
+ }
  
-Index: netbird/client/cmd/up.go
-===================================================================
---- netbird.orig/client/cmd/up.go
-+++ netbird/client/cmd/up.go
-@@ -292,9 +292,16 @@ func runInDaemonMode(ctx context.Context
-       conn, err := DialClientGRPCServer(ctx, daemonAddr)
-       if err != nil {
-               //nolint
--              return fmt.Errorf("failed to connect to daemon error: %v\n"+
--                      "If the daemon is not running please run: "+
--                      "\nnetbird service install \nnetbird service start\n", 
err)
-+              return fmt.Errorf("failed to connect to daemon error: %v\n\n" +
-+                      "The daemon may not be running. Try restarting the 
service:\n" +
-+                      "    sudo systemctl restart netbird.service\n\n" +
-+                      "To check the service status, use:\n" +
-+                      "    sudo systemctl status netbird.service\n\n" +
-+                      "Unless you are manually overriding with a custom 
drop-in file, " +
-+                      "you should see the default openSUSE service at:\n" +
-+                      "    /usr/lib/systemd/system/netbird.service\n\n" +
-+                      "If you see the service is disabled, you can run:\n" +
-+                      "    sudo systemctl enable netbird.service --now\n", 
err)
-       }
-       defer func() {
-               err := conn.Close()
+ // daemonCallError adds the context a failed daemon call happened in.
 

++++++ vendor.tar.zst ++++++
/work/SRC/openSUSE:Factory/netbird/vendor.tar.zst 
/work/SRC/openSUSE:Factory/.netbird.new.1251/vendor.tar.zst differ: char 6, 
line 1

Reply via email to