Script 'mail_helper' called by obssrc
Hello community,

here is the log from the commit of package flake-pilot for openSUSE:Factory 
checked in at 2026-11-17 17:21:01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/flake-pilot (Old)
 and      /work/SRC/openSUSE:Factory/.flake-pilot.new.1251 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Package is "flake-pilot"

Tue Nov 17 17:21:01 2026 rev:24 rq:1395449 version:3.2.19

Changes:
--------
--- /work/SRC/openSUSE:Factory/flake-pilot/flake-pilot.changes  2026-08-28 
19:47:48.946885490 +0200
+++ /work/SRC/openSUSE:Factory/.flake-pilot.new.1251/flake-pilot.changes        
2026-11-17 17:23:44.765099480 +0100
@@ -1,0 +2,1928 @@
+Thu Nov 05 15:10:52 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.18 → 3.2.19
+
+-------------------------------------------------------------------
+Thu Nov 05 14:56:20 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Use larger read buffers on vsock connections
+
+  For a higher throughput larger buffers on the data path are set.
+  The three copy loops now use a 64 KiB buffer instead of 1 byte,
+  set by a new IO_BUFFER_SIZE constant. Along with the buffers
+  retries are faster. Vsock Connect-back loop now retry every
+  100 ms instead of every 1s. Also stream_listener now creates
+  its socket before starting its thread, so it exists when the
+  command goes to the VM. Before, if sci connected back first,
+  it had to wait a full 1s for its next retry.
+
+-------------------------------------------------------------------
+Wed Nov 04 16:57:20 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.17 → 3.2.18
+
+-------------------------------------------------------------------
+Wed Nov 04 16:56:46 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add a note about other distributions in the docs
+
+-------------------------------------------------------------------
+Wed Nov 04 15:42:34 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.16 → 3.2.17
+
+-------------------------------------------------------------------
+Wed Nov 04 15:21:34 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add best practices chapter
+
+  Add a section about AI workloads
+
+-------------------------------------------------------------------
+Wed Nov 04 11:39:24 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add generic pi image to firecracker appstore
+
+-------------------------------------------------------------------
+Wed Nov 04 10:45:27 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Fix deepseek firecracker image
+
+  Keep the deepseek model setup to be the default
+
+-------------------------------------------------------------------
+Tue Nov 03 10:19:50 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add copilot to firecracker appstore
+
+-------------------------------------------------------------------
+Mon Nov 02 19:53:52 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.15 → 3.2.16
+
+-------------------------------------------------------------------
+Mon Nov 02 14:09:17 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add access checking for open_dir
+
+  Opening the rootfs and the optional layers needs to be more
+  strict. After opening R_OK | X_OK is required. faccessat2 syscall
+  runs directly on the opened descriptor with:
+
+  - AT_EMPTY_PATH checks the directory the descriptor refers to
+  without looking the path up again, so the path can't be swapped
+  between open and check.
+
+  - AT_EACCESS is essential: the helper's real UID stays root
+  (only the effective IDs are switched), so without it every
+  check would pass.
+
+  The checks happens with the caller's identity, prior any
+  privileges gain
+
+-------------------------------------------------------------------
+Mon Nov 02 12:31:23 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Fixes on read_config_file
+
+  Make sure to open a registration file such that it does not
+  block on FIFO's. After open check that the file is still a
+  regular file and reject if not. Last check that the filesize
+  does not exceed a certain limit. Currently we set 1MB which
+  is way more than a simple yaml registration files should
+  ever need.
+
+-------------------------------------------------------------------
+Fri Oct 30 10:19:32 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.14 → 3.2.15
+
+-------------------------------------------------------------------
+Fri Oct 30 10:11:07 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Fix man page rendering
+
+  Several places did not correctly quote the strong values resulting
+  in warning messages of the form: Inline strong start-string without
+  end-string. This commit fixes it
+
+-------------------------------------------------------------------
+Fri Oct 30 09:55:34 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.13 → 3.2.14
+
+-------------------------------------------------------------------
+Thu Oct 29 16:53:01 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Update deepseek firecracker appstore
+
+-------------------------------------------------------------------
+Thu Oct 29 16:37:38 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Update deepseek container
+
+  Add model setup for deepseek models
+
+-------------------------------------------------------------------
+Thu Oct 29 15:43:12 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add missing pi dependencies
+
+-------------------------------------------------------------------
+Thu Oct 29 15:08:27 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add --user option to flake-ctl firecracker register
+
+  The new option names the user to call the application as
+  inside of the VM. flake-ctl stores it as user in the runtime
+  section of the registration and firecracker-pilot passes it
+  to the guest as sci_user=NAME on the kernel commandline. The
+  name is validated on both sides such that it cannot break up
+  the kernel commandline.
+
+  sci looks up the user in /etc/passwd and /etc/group of the
+  instance and calls the command with the user and group ID
+  and the supplementary groups of the user, for the console as
+  well as for the vsock based calls. The databases are read
+  directly instead of using NSS, because a statically linked
+  sci cannot load the NSS modules of the glibc in the instance.
+  If the user does not exist in the instance a warning is
+  printed in debug mode and the command is called as root.
+  The setting is ignored for a command which replaces sci as
+  the init process, e.g systemd.
+
+  Co-Authored-By: Claude Opus 5.5 <[email protected]>
+
+-------------------------------------------------------------------
+Thu Oct 29 15:03:56 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add deepseek container to appstore
+
+-------------------------------------------------------------------
+Wed Oct 28 21:38:14 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.12 → 3.2.13
+
+-------------------------------------------------------------------
+Wed Oct 28 20:46:33 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Drop flake-pilot helper sandbox-run
+
+  The sandbox-run helper received all options including
+  the command to call inside of the sandbox as options
+  to the helper binary. With this approach the call cannot
+  be strictly mapped in a sudoers definition. Therefore
+  the sandbox-run helper was droped and a new helper named
+  bubblewrap-pilot was added. The new helper only receives
+  the path of the pilot registered app and the user provided
+  caller options for the command. The helper reads the
+  associated registration options from the app registration
+  and has now all information to call the bwrap
+
+-------------------------------------------------------------------
+Wed Oct 28 18:09:46 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add comment why tmpfs is attached before overlay
+
+  The tmpfs is created before the overlay because an
+  overlay refuses upper, work and lower directories of
+  a detached mount, and nothing can be attached into a
+  detached mount (up to Linux 6.14)
+
+-------------------------------------------------------------------
+Wed Oct 28 18:03:59 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Clear the group when switching back from layers
+
+  Split the identity switch out of open_layers_as() into two helpers
+  for better readability. open_layers_as is now three steps: switch
+  to the caller, open the layers, switch back. Switching back always
+  happens, even after a partial switch.
+
+-------------------------------------------------------------------
+Wed Oct 28 17:08:51 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Fix potential infinite loop from caller_groups
+
+  The open-ended loop is now for _ in 0..MAX_GROUP_READS.
+
+-------------------------------------------------------------------
+Wed Oct 28 16:44:17 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Fix the open_user_dir check
+
+  open_root_owned_dir() only checks that each component belongs to
+  root. It doesn't check that the components are not writable by
+  others, or are sticky. If /var/tmp were mode 0777 without the
+  sticky bit, another user could rename bwrap_<uid> and put their
+  own directory or symlink in its place. The owner check wouldn't
+  stop that, because it only covers the directory that was opened.
+  This can't give anyone root, since bwrap runs without privileges,
+  but it would compromise the caller's sandbox. This commit
+  fixes it by require each component to be not writable by others
+
+-------------------------------------------------------------------
+Wed Oct 28 16:28:56 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Guard open_layers
+
+  Just before calling open_layers(), it checks that the effective
+  user and group IDs are exactly the caller's. If not, it refuses
+  with an error and switches back to root as usual.
+
+-------------------------------------------------------------------
+Mon Oct 26 09:28:16 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Refactor build and deployment workflow
+
+  Add build and deployment metadata files. Instead of creating
+  a full build script for each app build, only provide the caller
+  options to the respective flake-ctl podman|firecracker build
+  commands. Next to this add metadata to deploy the built images
+  to an ECR or S3.
+
+  Consequently a tool per appstore is implemented to build and
+  deploy the container or image blobs. All shell scripts to build
+  and push data has been removed.
+
+-------------------------------------------------------------------
+Sun Oct 25 18:25:11 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.11 → 3.2.12
+
+-------------------------------------------------------------------
+Sun Oct 25 18:23:46 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Fix version number in fedora image
+
+  It's a rawhide build which is currently Fedora46
+
+-------------------------------------------------------------------
+Sun Oct 25 18:14:26 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Add fedora image to appstore
+
+-------------------------------------------------------------------
+Sun Oct 25 17:30:47 CET 2026 - Marcus Schäfer <[email protected]>
+
+- Wait for network in initrd only when configured
+
+  firecracker register now writes rd.neednet=0, network add writes
+  rd.neednet=1, and network remove sets it back to rd.neednet=0.
+  the registration template flake-ctl/template/firecracker-flake.yaml
+  contains rd.neednet=1 and ip=dhcp. Registration removed ip= but
+  kept rd.neednet=1, so the initrd waited for a network that was
+  never configured.
+
+-------------------------------------------------------------------
+Sat Oct 24 19:34:44 CEST 2026 - Marcus Schäfer <[email protected]>
+
+- Bump version: 3.2.10 → 3.2.11
+
+-------------------------------------------------------------------
+Sat Oct 24 19:15:54 CEST 2026 - Marcus Schäfer <[email protected]>
+
+- Add new command flake-ctl podman build
+
+  In the same way as flake-ctl firecracker build also
+  support building container images via the new podman
+  build command
+
+-------------------------------------------------------------------
+Sat Oct 24 18:14:57 CEST 2026 - Marcus Schäfer <[email protected]>
+
+- Add new command flake-ctl firecracker build
+
+  The new flake-ctl firecracker build command allows to
+  build firecracker images from a given KIWI image
++++ 1674 more lines (skipped)
++++ between /work/SRC/openSUSE:Factory/flake-pilot/flake-pilot.changes
++++ and /work/SRC/openSUSE:Factory/.flake-pilot.new.1251/flake-pilot.changes

Old:
----
  cargo_config
  systemd-tmpfiles-for-suse.conf

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Other differences:
------------------
++++++ flake-pilot.spec ++++++
--- /var/tmp/diff_new_pack.xC00u3/_old  2026-11-17 17:23:45.733140691 +0100
+++ /var/tmp/diff_new_pack.xC00u3/_new  2026-11-17 17:23:45.734140734 +0100
@@ -19,7 +19,7 @@
 
 
 Name:           flake-pilot
-Version:        3.1.45
+Version:        3.2.19
 Release:        0
 Summary:        Launcher for flake applications
 License:        MIT
@@ -29,10 +29,7 @@
 Group:          System/Management
 URL:            https://github.com/OSInside/flake-pilot
 Source0:        %{name}.tar.gz
-Source1:        cargo_config
 Source2:        %{name}-rpmlintrc
-# SUSE-specific source additions (1001+)
-Source1001:     systemd-tmpfiles-for-suse.conf
 %if 0%{?debian} || 0%{?ubuntu}
 Requires:       golang-github-containers-common
 %endif
@@ -51,6 +48,7 @@
 BuildRequires:  cargo
 BuildRequires:  openssl-devel
 BuildRequires:  rust
+BuildRequires:  systemd-rpm-macros
 %endif
 %if 0%{?debian} || 0%{?ubuntu}
 BuildRequires:  libssl-dev
@@ -60,6 +58,17 @@
 BuildRequires:  rust-all
 %endif
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
+%{!?_tmpfilesdir:%global _tmpfilesdir %{_prefix}/lib/tmpfiles.d}
+%global sci_static no
+%ifnarch ppc64le
+%if 0%{?fedora} || (0%{?suse_version} && 0%{?suse_version} >= 1600)
+%global sci_static yes
+%endif
+%endif
+%global tmpfiles_statedirs no
+%if 0%{?suse_version} >= 1600
+%global tmpfiles_statedirs yes
+%endif
 
 %description
 Run flake applications using a symlink structure pointing
@@ -73,10 +82,23 @@
 Requires:       podman
 Requires:       rsync
 Requires:       sudo
+# the helper runs system wide flakes for the calling user
+Requires:       flake-pilot = %{version}-%{release}
 
 %description -n flake-pilot-podman
 Launcher for OCI containers based applications through podman
 
+%package -n flake-pilot-bubblewrap
+Summary:        Bubblewrap pilot
+Group:          System/Management
+Requires:       bubblewrap
+Requires:       sudo
+# the helper mounts a root filesystem with mount points below it
+Requires:       flake-pilot = %{version}-%{release}
+
+%description -n flake-pilot-bubblewrap
+Launcher for applications running in a bubblewrap sandbox
+
 %package -n flake-pilot-firecracker
 Summary:        FireCracker pilot
 Group:          System/Management
@@ -90,6 +112,7 @@
 Requires:       firecracker
 %endif
 Requires:       e2fsprogs
+Requires:       nfs-kernel-server
 Requires:       sudo
 Requires:       xz
 
@@ -116,6 +139,7 @@
 %package -n flake-pilot-firecracker-guestvm-tools
 Summary:        FireCracker guest VM tools
 Group:          System/Management
+Requires:       nfs-client
 
 %description -n flake-pilot-firecracker-guestvm-tools
 Guest VM tools to help with firecracker workloads
@@ -124,64 +148,51 @@
 %setup -q -n flake-pilot
 
 %build
-mkdir -p .cargo
-cp %{SOURCE1} .cargo/config.toml
-make build
-%ifnarch ppc64le
-%if 0%{?fedora} || (0%{?suse_version} && 0%{?suse_version} >= 1600)
-make compile_sci_static
-%endif
-%endif
+make SCI_STATIC=%{sci_static} build
 
 %install
-make DESTDIR=%{buildroot}/ install
-
-test -f target/*-unknown-linux-gnu/static/sci && \
-make DESTDIR=%{buildroot}/ install_sci_static || \
-make DESTDIR=%{buildroot}/ install_sci
-
-mkdir -p %{buildroot}/overlayroot
-mkdir -p %{buildroot}/usr/lib/flake-pilot
-
-%if 0%{?suse_version} >= 1600
-install -D -m 644 %{SOURCE1001} 
%{buildroot}%{_tmpfilesdir}/flake-pilot-firecracker.conf
-%else
-mkdir -p %{buildroot}/var/lib/firecracker/images
-mkdir -p %{buildroot}/var/lib/firecracker/storage
-%endif
-
-mkdir -p %{buildroot}/etc/dracut.conf.d
-mkdir -p %{buildroot}/usr/lib/dracut/modules.d/80netstart
-cp -a firecracker-pilot/dracut/usr/lib/dracut/modules.d/80netstart/* \
-    %{buildroot}/usr/lib/dracut/modules.d/80netstart
-install -m 644 firecracker-pilot/dracut/etc/dracut.conf.d/extramodules.conf \
-    %{buildroot}/etc/dracut.conf.d/extramodules.conf
-
-install -m 755 %{buildroot}/usr/sbin/sci \
-    %{buildroot}/usr/lib/flake-pilot/sci
-
-mkdir -p %{buildroot}/etc
-install -m 644 flakes.yml %{buildroot}/etc/flakes.yml
-
-%pre
-# Permissions changed from previous versions, handle the transition
-if [ $1 -gt 1 ]; then
-    flakes_dir="/tmp/flakes/"
-    if [ -d "$flakes_dir/" ]; then
-        flakes_perm=$(/usr/bin/stat -c "%a" "$flakes_dir")
-        if [ "$flakes_perm" -ne "1777" ]; then
-            /usr/bin/chmod +t $flakes_dir
-            # If the permissions were not already set we also need to worry
-            # about the content.
-            # For podman we need a copy of the .cid file in the new hierarchy
-            # so flake-pilot knows which Container ID to use to tell podman to
-            # shut the container down. podman cleans up the original cid file
-            # the copy remains and eventually gets garbage collected by
-            # flake pilot
+make DESTDIR=%{buildroot}/ \
+    TMPFILESDIR=%{_tmpfilesdir} \
+    TMPFILES_STATEDIRS=%{tmpfiles_statedirs} \
+    install
+
+# After 3.1.37 the organization and permission handling of state files
+# has changed. Handle the transition
+%triggerun -- flake-pilot <= 3.1.37
+    flakes_dir="/tmp/flakes"
+    if [ -d "$flakes_dir" ] && [ ! -L "$flakes_dir" ]; then
+        # While we operate on the directory we need to ensure root
+        # is in control
+        # Do not follow symlinks for the permission operations. An
+        # attacker might have replaced the directory we checked for with a
+        # link by the time we get here.
+        chown -h root "$flakes_dir"
+        chgrp -h root /tmp/flakes
+        chmod -h 600 /tmp/flakes
+        # Verify we have what we expect
+        flakes_perm=$(/usr/bin/stat -c "%u:%g:%a" "$flakes_dir")
+        if [ "$flakes_perm" != "0:0:600" ]; then
+            echo "Improper permissions on $flakes_dir please remove "
+            echo "to start over"
+            exit 0
+        fi
+        usr_flakes=$(ls -d "$flakes_dir"/*/ 2> /dev/null)
+        # If subdirectories exist we are already on the version of flake
+        # that has the expected structure, or the user did something they
+        # were not supposed to do. In either case we skip any operation
+        if [ -z "$usr_flakes" ]; then
+            # For podman we need a copy of the .cid file in the new
+            # hierarchy so flake-pilot knows which Container ID to
+            # use to tell podman to shut the container down. podman
+            # cleans up the original cid file the copy remains and
+            # eventually gets garbage collected by flake pilot
             # For microVMs the .mid file needs to get moved and renamed to
             # allow flake-pilot to clean up
+            created_dirs=" "
             for filepath in "$flakes_dir"/*; do
-                [ -f "$filepath" ] || continue
+               if [ -L "$filepath" ] || [ ! -f "$filepath" ]; then
+                   continue
+               fi           
 
                 filename=$(basename "$filepath")
 
@@ -194,57 +205,117 @@
                     # Look up UID for the extracted username
                     if uid=$(id -u "$username" 2>/dev/null); then
                         user_dir="$flakes_dir/$uid"
-                        # Create user directory if it doesn't exist
-                        if [ ! -d "$user_dir" ]; then
-                            mkdir -p "$user_dir"
+                       case "$created_dirs" in
+                            *" $uid "*) ;;
+                            *)
+                                if [ -e "$user_dir" ] || [ -L "$user_dir" ]; 
then
+                                   echo "$user_dir exists, this is unexpected."
+                                   echo "Stop any running flakes (aws, az) and 
"
+                                   echo "remove $flakes_dir. Cannot migrate to"
+                                   echo "new structure in a safe way."
+                                   # Set the permissions back to what we 
expected before we started
+                                   chmod -h 777 "$flakes_dir"
+                                   exit 0
                         fi
+                                mkdir "$user_dir"
+                                created_dirs="$created_dirs$uid "
+                            ;;
+                        esac
                         if [[ "$filename" == *".vmid"* ]]; then
-                            mv "$filepath" "$user_dir/$cmdname.vmid"
+                            mv -T "$filepath" "$user_dir/$cmdname.vmid"
                         else
                             # We need the .cid files in 2 places
-                            cp "$filepath" "$user_dir/$cmdname.cid"
+                            cp --no-dereference --remove-destination 
"$filepath" "$user_dir/$cmdname.cid"
                         fi
                     fi
                     # Fix the directory permissions
-                    chown "$uid" "$user_dir"
-                    chgrp "$uid" "$user_dir"
-                    chmod 700 "$user_dir"
+                    chown -h "$uid" "$user_dir"
+                    chgrp -h "$uid" "$user_dir"
+                    chmod -h 700 "$user_dir"
                 fi
             done
+            # Now set the top level directory to the desired permissions
+            chmod 1777 $flakes_dir
+           exit 0
         fi
+       # If we get here something went wrong set the permissions back to
+       # our expected starting state
+       chmod -h 777 "$flakes_dir"
     fi
-fi
 
+%post
+# Create the meta data directory now, not only at the next boot.
+# An existing directory which belongs to another user is handed
+# over to root
+%if 0%{?suse_version} || 0%{?fedora}
+%tmpfiles_create flake-pilot.conf
+%else
+if [ -x /usr/bin/systemd-tmpfiles ]; then
+    /usr/bin/systemd-tmpfiles --create %{_tmpfilesdir}/flake-pilot.conf || :
+fi
+%endif
 
 %files
 %defattr(-,root,root)
 %dir /etc/flakes
 %config /etc/flakes.yml
-/usr/bin/flake-ctl
-/usr/share/bash-completion/completions/flake-ctl
-%doc /usr/share/man/man8/flake-pilot.8.gz
-%doc /usr/share/man/man8/flake-ctl.8.gz
-%doc /usr/share/man/man8/flake-ctl-init.8.gz
-%doc /usr/share/man/man8/flake-ctl-list.8.gz
+%{_tmpfilesdir}/flake-pilot.conf
+%{_bindir}/flake-ctl
+# The helper performs every privileged action of flake-pilot. It is
+# called through sudo and must only be writable by root. Its path
+# is compiled into the tools calling it
+%dir /usr/libexec/flake-pilot
+%attr(0755,root,root) /usr/libexec/flake-pilot/flake-pilot-helper
+%{_datadir}/bash-completion/completions/flake-ctl
+%doc doc/sudoers/flake-pilot.sudoers
+%doc %{_mandir}/man8/flake-pilot-helper.8.gz
+%doc %{_mandir}/man8/flake-pilot.8.gz
+%doc %{_mandir}/man8/flake-ctl.8.gz
+%doc %{_mandir}/man8/flake-ctl-init.8.gz
+%doc %{_mandir}/man8/flake-ctl-list.8.gz
 
-%post
-if [ -d /tmp/flakes ];then
-    # make sure to move an eventually existing
-    # tmp flakes dir to sticky bit permissions
-    chmod 1777 /tmp/flakes
-fi
+%post -n flake-pilot-podman
+%if 0%{?suse_version} >= 1600
+  %tmpfiles_create flake-pilot-podman.conf
+%endif
 
 %files -n flake-pilot-podman
 %config /etc/flakes/container-flake.yaml
 %config /etc/flakes/storage.conf
-/usr/bin/podman-pilot
+%if 0%{?suse_version} >= 1600
+%{_tmpfilesdir}/flake-pilot-podman.conf
+%ghost %dir /var/lib/podman
+%ghost %dir %attr(0700,root,root) /var/lib/podman/storage
+%else
+%dir /var/lib/podman
+%dir %attr(0700,root,root) /var/lib/podman/storage
+%endif
+%dir /usr/lib/podman
+%dir %attr(0700,root,root) /usr/lib/podman/storage
+%{_bindir}/podman-pilot
 /usr/sbin/flake-registry
-%doc /usr/share/man/man8/flake-ctl-podman-load.8.gz
-%doc /usr/share/man/man8/flake-ctl-podman-pull.8.gz
-%doc /usr/share/man/man8/flake-ctl-podman-register.8.gz
-%doc /usr/share/man/man8/flake-ctl-podman-remove.8.gz
-%doc /usr/share/man/man8/flake-ctl-podman-show.8.gz
-%doc /usr/share/man/man8/podman-pilot.8.gz
+%doc %{_mandir}/man8/flake-ctl-podman-export.8.gz
+%doc %{_mandir}/man8/flake-ctl-podman-load.8.gz
+%doc %{_mandir}/man8/flake-ctl-podman-build.8.gz
+%doc %{_mandir}/man8/flake-ctl-podman-pull.8.gz
+%doc %{_mandir}/man8/flake-ctl-podman-register.8.gz
+%doc %{_mandir}/man8/flake-ctl-podman-remove.8.gz
+%doc %{_mandir}/man8/flake-ctl-podman-reset.8.gz
+%doc %{_mandir}/man8/flake-ctl-podman-show.8.gz
+%doc %{_mandir}/man8/podman-pilot.8.gz
+
+%files -n flake-pilot-bubblewrap
+%config /etc/flakes/bubblewrap-flake.yaml
+%{_bindir}/bubblewrap-pilot
+%doc %{_mandir}/man8/flake-ctl-bubblewrap-register.8.gz
+%doc %{_mandir}/man8/flake-ctl-bubblewrap-remove.8.gz
+%doc %{_mandir}/man8/flake-ctl-bubblewrap-show.8.gz
+%doc %{_mandir}/man8/bubblewrap-pilot.8.gz
+
+%if 0%{?suse_version} >= 1600
+%post -n flake-pilot-firecracker
+%tmpfiles_create flake-pilot-firecracker.conf
+%endif
 
 %files -n flake-pilot-firecracker
 %if 0%{?suse_version} >= 1600
@@ -257,27 +328,34 @@
 %dir /var/lib/firecracker/images
 %dir /var/lib/firecracker/storage
 %endif
-%dir /usr/lib/flake-pilot
 %config /etc/flakes/firecracker-flake.yaml
 %config /etc/flakes/firecracker.json
-%doc /usr/share/man/man8/flake-ctl-firecracker-pull.8.gz
-%doc /usr/share/man/man8/flake-ctl-firecracker-remove.8.gz
-%doc /usr/share/man/man8/flake-ctl-firecracker-register.8.gz
-%doc /usr/share/man/man8/flake-ctl-firecracker-show.8.gz
-/usr/bin/firecracker-pilot
-%doc /usr/share/man/man8/firecracker-pilot.8.gz
-/usr/lib/flake-pilot/sci
+%doc %{_mandir}/man8/flake-ctl-firecracker-pull.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-build.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-remove.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-register.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-show.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-network-init.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-network-add.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-network-remove.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-network-cleanup.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-volume-export.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-volume-release.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-volume-add.8.gz
+%doc %{_mandir}/man8/flake-ctl-firecracker-volume-remove.8.gz
+%{_bindir}/firecracker-pilot
+%doc %{_mandir}/man8/firecracker-pilot.8.gz
 
 %files -n flake-pilot-firecracker-dracut-netstart
-%dir /usr/lib/dracut
-%dir /usr/lib/dracut/modules.d
-%dir /usr/lib/dracut/modules.d/80netstart
+%dir %{_prefix}/lib/dracut
+%dir %{_prefix}/lib/dracut/modules.d
+%dir %{_prefix}/lib/dracut/modules.d/80netstart
 %dir /etc/dracut.conf.d
-/usr/lib/dracut/modules.d/80netstart
+%{_prefix}/lib/dracut/modules.d/80netstart
 %config /etc/dracut.conf.d/extramodules.conf
 
 %files -n flake-pilot-firecracker-guestvm-tools
 %dir /overlayroot
 /usr/sbin/sci
-%doc /usr/share/man/man8/sci.8.gz
+%doc %{_mandir}/man8/sci.8.gz
 

++++++ flake-pilot.tar.gz ++++++
/work/SRC/openSUSE:Factory/flake-pilot/flake-pilot.tar.gz 
/work/SRC/openSUSE:Factory/.flake-pilot.new.1251/flake-pilot.tar.gz differ: 
char 5, line 1

Reply via email to