Script 'mail_helper' called by obssrc Hello community, here is the log from the commit of package raspberrypi-firmware for openSUSE:Factory checked in at 2022-10-11 18:01:36 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware (Old) and /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.2275 (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware" Tue Oct 11 18:01:36 2022 rev:92 rq:1007924 version:2022.09.30 Changes: -------- --- /work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-config-camera.changes 2022-07-09 16:59:02.048435807 +0200 +++ /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.2275/raspberrypi-firmware-config-camera.changes 2022-10-11 18:04:00.353935057 +0200 @@ -1,0 +2,37 @@ +Tue Oct 4 11:49:36 UTC 2022 - Guillaume GARDET <guillaume.gar...@opensuse.org> + +- Update to 2b3cef2f4 (2022-09-30): + * firmware: isp: Workaround for very unpleasant artifacts in the + sharpening block + * firmware: arm_loader: Raise maximum gzipped kernel size + * firmware: arm-loader: Indicate tryboot status via /proc/device-tree/chosen/bootloader/tryboot + * firmware: arm_loader: Increase TFTP block size to 1468 bytes + See: raspberrypi/rpi-eeprom#375 + * firmware: Add kernel= logging + * firmware: camera_auto_detect changes + See: #1750 + * firmware: Fix USB boot + See: #1744 + * firmware: video decode/MJPEG fixes + See: http://git/vc4/vc4/-/merge_requests/1548 + * firmware: power: Restore VEC and PIXEL clocks after HDMI domain power cycle + See: raspberrypi/linux#4962 + * firmware: arm_loader: Never set warranty bit + See: #1741 + * firmware: vcfw: camera_subsystem: Fix loop counter for powering up devices + See: https://forums.raspberrypi.com/viewtopic.php?t=338917 + * firmware: ldconfig: Add [cm4s] conditional + * firmware: platform: Set min_frequency for HDMI SM clock on Pi0-3 + * firmware: power: Fix failover to secondary PMIC interface functions + See: https://forums.raspberrypi.com/viewtopic.php?t=338429 + * firmware: arm_loader: Correct GPIO expander initial state via SET_GPIO_CONFIG + See: raspberrypi/linux#5107 + * firmware: Disable BT flow control pins for Pi3 rev1.3 + * firmware: arm_loader: initramfs over NVME fix + See: #1731 + * firmware: arm-dt: Export log buffer addresses to /proc/chosen/log + * firmware: arm_loader: Fix GET_CLOCKS to not overwrite client buffer + See: #1688 + * firmware: arm_loader: Declare program_sdhost_use_dma + +------------------------------------------------------------------- raspberrypi-firmware-config.changes: same change raspberrypi-firmware.changes: same change Old: ---- raspberrypi-firmware-2022.07.04.tar.bz2 New: ---- raspberrypi-firmware-2022.09.30.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ raspberrypi-firmware-config-camera.spec ++++++ --- /var/tmp/diff_new_pack.HWwlZv/_old 2022-10-11 18:04:01.205936435 +0200 +++ /var/tmp/diff_new_pack.HWwlZv/_new 2022-10-11 18:04:01.209936441 +0200 @@ -17,7 +17,7 @@ Name: raspberrypi-firmware-config-camera -Version: 2022.07.04 +Version: 2022.09.30 Release: 0 Summary: Configuration for the Raspberry Pi firmware loader License: MIT raspberrypi-firmware-config.spec: same change ++++++ raspberrypi-firmware.spec ++++++ --- /var/tmp/diff_new_pack.HWwlZv/_old 2022-10-11 18:04:01.269936538 +0200 +++ /var/tmp/diff_new_pack.HWwlZv/_new 2022-10-11 18:04:01.273936544 +0200 @@ -23,7 +23,7 @@ %global modprobe_d_files 50-rpi3.conf Name: raspberrypi-firmware -Version: 2022.07.04 +Version: 2022.09.30 Release: 0 Summary: Binary bootloader and firmware files for Raspberry Pi License: SUSE-Firmware ++++++ raspberrypi-firmware-2022.07.04.tar.bz2 -> raspberrypi-firmware-2022.09.30.tar.bz2 ++++++ /work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-2022.07.04.tar.bz2 /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.2275/raspberrypi-firmware-2022.09.30.tar.bz2 differ: char 11, line 1