Script 'mail_helper' called by obssrc
Hello community,
here is the log from the commit of package libosip2 for openSUSE:Factory
checked in at 2022-12-21 16:07:23
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/libosip2 (Old)
and /work/SRC/openSUSE:Factory/.libosip2.new.1835 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "libosip2"
Wed Dec 21 16:07:23 2022 rev:31 rq:1044062 version:5.3.1
Changes:
--------
--- /work/SRC/openSUSE:Factory/libosip2/libosip2.changes 2022-02-13
19:51:46.602330012 +0100
+++ /work/SRC/openSUSE:Factory/.libosip2.new.1835/libosip2.changes
2022-12-21 16:07:25.162806495 +0100
@@ -1,0 +2,6 @@
+Fri Nov 25 11:56:21 UTC 2022 - Dominique Leuenberger <dims...@opensuse.org>
+
+- Update to version 5.3.1:
+ + In multipart bodies, LWS can't exist (CVE-2022-41550).
+
+-------------------------------------------------------------------
Old:
----
libosip2-5.3.0.tar.gz
libosip2-5.3.0.tar.gz.sig
New:
----
libosip2-5.3.1.tar.gz
libosip2-5.3.1.tar.gz.sig
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ libosip2.spec ++++++
--- /var/tmp/diff_new_pack.HFIZzx/_old 2022-12-21 16:07:25.734809579 +0100
+++ /var/tmp/diff_new_pack.HFIZzx/_new 2022-12-21 16:07:25.738809601 +0100
@@ -1,7 +1,7 @@
#
# spec file for package libosip2
#
-# Copyright (c) 2021 SUSE LLC
+# Copyright (c) 2022 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -18,7 +18,7 @@
%define sover 15
Name: libosip2
-Version: 5.3.0
+Version: 5.3.1
Release: 0
Summary: Implementation of SIP (RFC 3261)
License: LGPL-2.1-or-later
++++++ libosip2-5.3.0.tar.gz -> libosip2-5.3.1.tar.gz ++++++
++++ 1990 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/ChangeLog new/libosip2-5.3.1/ChangeLog
--- old/libosip2-5.3.0/ChangeLog 2021-11-22 16:14:49.000000000 +0100
+++ new/libosip2-5.3.1/ChangeLog 2022-10-12 19:28:12.000000000 +0200
@@ -1,3 +1,6 @@
+libosip2 (5.3.1) - 2022-10-12
+ * fix bug #63103: [CVE-2022-41550] in multipart bodies, LWS can't exist
+
libosip2 (5.3.0) - 2021-11-22
* STRUCTURE change: struct osip_transaction
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/configure.ac new/libosip2-5.3.1/configure.ac
--- old/libosip2-5.3.0/configure.ac 2021-11-22 16:14:49.000000000 +0100
+++ new/libosip2-5.3.1/configure.ac 2022-10-12 19:32:18.000000000 +0200
@@ -1,15 +1,15 @@
AC_PREREQ([2.69])
-AC_INIT([libosip2],[5.3.0])
+AC_INIT([libosip2],[5.3.1])
AC_CONFIG_SRCDIR([include/osip2/osip.h])
AC_MSG_NOTICE([libosip2 The GNU Open SIP library.])
-AC_MSG_NOTICE([Copyright (C) 2001-2021 Aymeric MOIZARD -
<amoiz...@antisip.com>])
+AC_MSG_NOTICE([Copyright (C) 2001-2022 Aymeric MOIZARD -
<amoiz...@antisip.com>])
#âcurrent[:revision[:age]]â. So, passing -version-info 3:12:1 sets current
to 3, revision to 12, and age to 1
# 1/ increase revision for every source code change [release]
# 2/ increase current for every API/ABI change and revert revision to 0
# 3/ always set age to 0 (for public release)
-AC_SUBST(LIBOSIP_SO_VERSION, 15:0:0)
+AC_SUBST(LIBOSIP_SO_VERSION, 15:1:0)
AC_SUBST(OSIP_VERSION, $VERSION)
AC_MSG_RESULT([Configuring ${PACKAGE} ${VERSION}])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/help/doxygen/DoxyFile
new/libosip2-5.3.1/help/doxygen/DoxyFile
--- old/libosip2-5.3.0/help/doxygen/DoxyFile 2021-11-22 16:14:49.000000000
+0100
+++ new/libosip2-5.3.1/help/doxygen/DoxyFile 2022-10-12 19:31:43.000000000
+0200
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.13
+# Doxyfile 1.9.1
# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
@@ -17,11 +17,11 @@
# Project related configuration options
#---------------------------------------------------------------------------
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
text
-# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
-# built into libc) for the transcoding. See
http://www.gnu.org/software/libiconv
-# for the list of possible encodings.
+# This tag specifies the encoding used for all characters in the configuration
+# file that follow. The default is UTF-8 which is also the encoding used for
all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
# The default value is: UTF-8.
DOXYFILE_ENCODING = UTF-8
@@ -38,7 +38,7 @@
# could be handy for archiving the generated documentation or if some version
# control system is used.
-PROJECT_NUMBER = 5.3.0
+PROJECT_NUMBER = 5.3.1
# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer a
@@ -93,6 +93,14 @@
OUTPUT_LANGUAGE = English
+# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all generated output in the proper direction.
+# Possible values are: None, LTR, RTL and Context.
+# The default value is: None.
+
+OUTPUT_TEXT_DIRECTION = None
+
# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
# descriptions after the members that are listed in the file and class
# documentation (similar to Javadoc). Set to NO to disable this.
@@ -179,6 +187,16 @@
JAVADOC_AUTOBRIEF = NO
+# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line
+# such as
+# /***************
+# as being the beginning of a Javadoc-style comment "banner". If set to NO, the
+# Javadoc-style will behave just like regular comments and it will not be
+# interpreted by doxygen.
+# The default value is: NO.
+
+JAVADOC_BANNER = NO
+
# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
# line (until the first dot) of a Qt-style comment as the brief description. If
# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
@@ -199,6 +217,14 @@
MULTILINE_CPP_IS_BRIEF = NO
+# By default Python docstrings are displayed as preformatted text and doxygen's
+# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
+# doxygen's special commands can be used and the contents of the docstring
+# documentation blocks is shown as doxygen documentation.
+# The default value is: YES.
+
+PYTHON_DOCSTRING = YES
+
# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits
the
# documentation from any documented member that it re-implements.
# The default value is: YES.
@@ -226,16 +252,15 @@
# will allow you to put the command \sideeffect (or @sideeffect) in the
# documentation, which will result in a user-defined paragraph with heading
# "Side Effects:". You can put \n's in the value part of an alias to insert
-# newlines.
+# newlines (in the resulting output). You can put ^^ in the value part of an
+# alias to insert a newline as if a physical newline was in the original file.
+# When you need a literal { or } or , in the value part of an alias you have to
+# escape them by means of a backslash (\), this can lead to conflicts with the
+# commands \{ and \} for these it is advised to use the version @{ and @} or
use
+# a double escape (\\{ and \\})
ALIASES =
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding "class=itcl::class"
-# will allow you to use the command class in the itcl::class meaning.
-
-TCL_SUBST =
-
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
sources
# only. Doxygen will then generate output that is more tailored for C. For
# instance, some of the names that are used will be different. The list of all
@@ -264,28 +289,40 @@
OPTIMIZE_OUTPUT_VHDL = NO
+# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice
+# sources only. Doxygen will then generate output that is more tailored for
that
+# language. For instance, namespaces will be presented as modules, types will
be
+# separated into more groups, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_SLICE = NO
+
# Doxygen selects the parser to use depending on the extension of the files it
# parses. With this tag you can assign which parser to use for a given
# extension. Doxygen has a built-in mapping, but you can override or extend it
# using this tag. The format is ext=language, where ext is a file extension,
and
-# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
-# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
-# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
-# Fortran. In the later case the parser tries to guess whether the code is
fixed
-# or free formatted code, this is the default for Fortran type files), VHDL.
For
-# instance to make doxygen treat .inc files as Fortran files (default is PHP),
-# and .f files as C (default is Fortran), use: inc=Fortran f=C.
+# language is one of the parsers supported by doxygen: IDL, Java, JavaScript,
+# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL,
+# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
+# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
+# tries to guess whether the code is fixed or free formatted code, this is the
+# default for Fortran type files). For instance to make doxygen treat .inc
files
+# as Fortran files (default is PHP), and .f files as C (default is Fortran),
+# use: inc=Fortran f=C.
#
# Note: For files without extension you can use no_extension as a placeholder.
#
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
-# the files are not read by doxygen.
+# the files are not read by doxygen. When specifying no_extension you should
add
+# * to the FILE_PATTERNS.
+#
+# Note see also the list of default file extension mappings.
EXTENSION_MAPPING =
# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all
comments
# according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
+# documentation. See https://daringfireball.net/projects/markdown/ for details.
# The output of markdown processing is further processed by doxygen, so you can
# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
# case of backward compatibilities issues.
@@ -297,7 +334,7 @@
# to that level are automatically included in the table of contents, even if
# they do not have an id attribute.
# Note: This feature currently applies only to Markdown headings.
-# Minimum value: 0, maximum value: 99, default value: 0.
+# Minimum value: 0, maximum value: 99, default value: 5.
# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
TOC_INCLUDE_HEADINGS = 0
@@ -327,7 +364,7 @@
CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
-# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
+# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
# will parse them like normal C++ but will assume all classes use public
instead
# of private inheritance when no explicit protection keyword is present.
# The default value is: NO.
@@ -413,6 +450,19 @@
LOOKUP_CACHE_SIZE = 0
+# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use
+# during processing. When set to 0 doxygen will based this on the number of
+# cores available in the system. You can set it explicitly to a value larger
+# than 0 to get more control over the balance between CPU load and processing
+# speed. At this moment only the input processing can be done using multiple
+# threads. Since this is still an experimental feature the default is set to 1,
+# which efficively disables parallel processing. Please report any issues you
+# encounter. Generating dot graphs in parallel is controlled by the
+# DOT_NUM_THREADS setting.
+# Minimum value: 0, maximum value: 32, default value: 1.
+
+NUM_PROC_THREADS = 1
+
#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------
@@ -433,6 +483,12 @@
EXTRACT_PRIVATE = NO
+# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual
+# methods of a class will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIV_VIRTUAL = NO
+
# If the EXTRACT_PACKAGE tag is set to YES, all members with package or
internal
# scope will be included in the documentation.
# The default value is: NO.
@@ -470,6 +526,13 @@
EXTRACT_ANON_NSPACES = NO
+# If this flag is set to YES, the name of an unnamed parameter in a declaration
+# will be determined by the corresponding definition. By default unnamed
+# parameters remain unnamed in the output.
+# The default value is: YES.
+
+RESOLVE_UNNAMED_PARAMS = YES
+
# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
# undocumented members inside documented classes or files. If set to NO these
# members will be included in the various overviews, but no documentation
@@ -487,8 +550,8 @@
HIDE_UNDOC_CLASSES = NO
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
-# (class|struct|union) declarations. If set to NO, these declarations will be
-# included in the documentation.
+# declarations. If set to NO, these declarations will be included in the
+# documentation.
# The default value is: NO.
HIDE_FRIEND_COMPOUNDS = NO
@@ -507,11 +570,18 @@
INTERNAL_DOCS = NO
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
-# names in lower-case letters. If set to YES, upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
+# With the correct setting of option CASE_SENSE_NAMES doxygen will better be
+# able to match the capabilities of the underlying filesystem. In case the
+# filesystem is case sensitive (i.e. it supports files in the same directory
+# whose names only differ in casing), the option must be set to YES to properly
+# deal with such files in case they appear in the input. For filesystems that
+# are not case sensitive the option should be be set to NO to properly deal
with
+# output files written for symbols that only differ in casing, such as for two
+# classes, one named CLASS and the other named Class, and to also support
+# references to files without having to specify the exact matching casing. On
+# Windows (including Cygwin) and MacOS, users should typically set this option
+# to NO, whereas on Linux or other Unix flavors it should typically be set to
+# YES.
# The default value is: system dependent.
CASE_SENSE_NAMES = YES
@@ -698,7 +768,7 @@
# The CITE_BIB_FILES tag can be used to specify one or more bib files
containing
# the reference definitions. This must be a list of .bib files. The .bib
# extension is automatically appended if omitted. This requires the bibtex tool
-# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
+# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
# For LaTeX the style of the bibliography can be controlled using
# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in
the
# search path. See also \cite for info how to create references.
@@ -743,13 +813,17 @@
# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions
that
# are documented, but have no documentation for their parameters or return
# value. If set to NO, doxygen will only warn about wrong or incomplete
-# parameter documentation, but not about the absence of documentation.
+# parameter documentation, but not about the absence of documentation. If
+# EXTRACT_ALL is set to YES then this flag will automatically be disabled.
# The default value is: NO.
WARN_NO_PARAMDOC = NO
# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop
when
-# a warning is encountered.
+# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
+# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
+# at the end of the doxygen process doxygen will return with a non-zero status.
+# Possible values are: NO, YES and FAIL_ON_WARNINGS.
# The default value is: NO.
WARN_AS_ERROR = NO
@@ -789,8 +863,8 @@
# This tag can be used to specify the character encoding of the source files
# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
-# documentation (see: http://www.gnu.org/software/libiconv) for the list of
-# possible encodings.
+# documentation (see:
+# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
# The default value is: UTF-8.
INPUT_ENCODING = UTF-8
@@ -803,11 +877,15 @@
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
# read by doxygen.
#
+# Note the list of default checked file patterns might differ from the list of
+# default file extension mappings.
+#
# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
-# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
-# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf.
+# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment),
+# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl,
+# *.ucf, *.qsf and *.ice.
FILE_PATTERNS = *.h \
*.c \
@@ -964,7 +1042,7 @@
STRIP_CODE_COMMENTS = YES
# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
-# function all documented functions referencing it will be listed.
+# entity all documented functions referencing it will be listed.
# The default value is: NO.
REFERENCED_BY_RELATION = YES
@@ -996,12 +1074,12 @@
# If the USE_HTAGS tag is set to YES then the references to source code will
# point to the HTML generated by the htags(1) tool instead of doxygen built-in
# source browser. The htags tool is part of GNU's global source tagging system
-# (see http://www.gnu.org/software/global/global.html). You will need version
+# (see https://www.gnu.org/software/global/global.html). You will need version
# 4.8.6 or higher.
#
# To use it do the following:
# - Install the latest version of global
-# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
+# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file
# - Make sure the INPUT points to the root of the source tree
# - Run doxygen as normal
#
@@ -1024,16 +1102,22 @@
VERBATIM_HEADERS = YES
# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
-# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
-# cost of reduced performance. This can be particularly helpful with template
-# rich C++ code for which doxygen's built-in parser lacks the necessary type
-# information.
+# clang parser (see:
+# http://clang.llvm.org/) for more accurate parsing at the cost of reduced
+# performance. This can be particularly helpful with template rich C++ code for
+# which doxygen's built-in parser lacks the necessary type information.
# Note: The availability of this option depends on whether or not doxygen was
-# generated with the -Duse-libclang=ON option for CMake.
+# generated with the -Duse_libclang=ON option for CMake.
# The default value is: NO.
CLANG_ASSISTED_PARSING = NO
+# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set
to
+# YES then doxygen will add the directory of each input to the include path.
+# The default value is: YES.
+
+CLANG_ADD_INC_PATHS = YES
+
# If clang assisted parsing is enabled you can provide the compiler with
command
# line options that you would normally use when invoking the compiler. Note
that
# the include paths will already be set by doxygen for the files and
directories
@@ -1042,6 +1126,19 @@
CLANG_OPTIONS =
+# If clang assisted parsing is enabled you can provide the clang parser with
the
+# path to the directory containing a file called compile_commands.json. This
+# file is the compilation database (see:
+# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the
+# options used when the source files were built. This is equivalent to
+# specifying the -p option to a clang tool, such as clang-check. These options
+# will then be passed to the parser. Any options specified with CLANG_OPTIONS
+# will be added as well.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+
+CLANG_DATABASE_PATH =
+
#---------------------------------------------------------------------------
# Configuration options related to the alphabetical class index
#---------------------------------------------------------------------------
@@ -1053,13 +1150,6 @@
ALPHABETICAL_INDEX = NO
-# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
-# which the alphabetical index list will be split.
-# Minimum value: 1, maximum value: 20, default value: 5.
-# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
-
-COLS_IN_ALPHA_INDEX = 5
-
# In case all classes in a project start with a common prefix, all classes will
# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
# can be used to specify a prefix (or a list of prefixes) that should be
ignored
@@ -1160,7 +1250,7 @@
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the style sheet and background images according to
# this color. Hue is specified as an angle on a colorwheel, see
-# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# https://en.wikipedia.org/wiki/Hue for more information. For instance the
value
# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
# purple, and 360 is red again.
# Minimum value: 0, maximum value: 359, default value: 220.
@@ -1196,6 +1286,17 @@
HTML_TIMESTAMP = YES
+# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
+# documentation will contain a main index with vertical navigation menus that
+# are dynamically created via JavaScript. If disabled, the navigation index
will
+# consists of multiple levels of tabs that are statically embedded in every
HTML
+# page. Disable this option to support browsers that do not have JavaScript,
+# like the Qt help browser.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_MENUS = YES
+
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded.
@@ -1219,13 +1320,14 @@
# If the GENERATE_DOCSET tag is set to YES, additional index files will be
# generated that can be used as input for Apple's Xcode 3 integrated
development
-# environment (see: http://developer.apple.com/tools/xcode/), introduced with
-# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
-# Makefile in the HTML output directory. Running make will produce the docset
in
-# that directory and running make install will install the docset in
+# environment (see:
+# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
+# create a documentation set, doxygen will generate a Makefile in the HTML
+# output directory. Running make will produce the docset in that directory and
+# running make install will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it
at
-# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
+# startup. See
https://developer.apple.com/library/archive/featuredarticles/Doxy
+# genXcode/_index.html for more information.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
@@ -1264,8 +1366,8 @@
# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
# index.hhp is a project file that can be read by Microsoft's HTML Help
Workshop
-# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
-# Windows.
+# (see:
+# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows.
#
# The HTML Help Workshop contains a compiler that can convert all HTML output
# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
@@ -1295,7 +1397,7 @@
HHC_LOCATION =
# The GENERATE_CHI flag controls if a separate .chi index file is generated
-# (YES) or that it should be included in the master .chm file (NO).
+# (YES) or that it should be included in the main .chm file (NO).
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
@@ -1340,7 +1442,8 @@
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
-# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
+# (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_QHP is set to YES.
@@ -1348,8 +1451,8 @@
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
# Help Project output. For more information please see Qt Help Project /
Virtual
-# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
-# folders).
+# Folders (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
# The default value is: doc.
# This tag requires that the tag GENERATE_QHP is set to YES.
@@ -1357,30 +1460,30 @@
# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
# filter to add. For more information please see Qt Help Project / Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project /
Custom
-# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
-# filters).
+# Filters (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's filter section matches. Qt Help Project / Filter Attributes (see:
-# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
# This tag requires that the tag GENERATE_QHP is set to YES.
QHP_SECT_FILTER_ATTRS =
-# The QHG_LOCATION tag can be used to specify the location of Qt's
-# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
-# generated .qhp file.
+# The QHG_LOCATION tag can be used to specify the location (absolute path
+# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
+# run qhelpgenerator on the generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.
QHG_LOCATION =
@@ -1457,6 +1560,17 @@
EXT_LINKS_IN_WINDOW = NO
+# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
+# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
+# https://inkscape.org) to generate formulas as SVG images instead of PNGs for
+# the HTML output. These images will generally look nicer at scaled
resolutions.
+# Possible values are: png (the default) and svg (looks nicer but requires the
+# pdf2svg or inkscape tool).
+# The default value is: png.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FORMULA_FORMAT = png
+
# Use this tag to change the font size of LaTeX formulas included as images in
# the HTML documentation. When you change the font size after a successful
# doxygen run you need to manually remove any form_*.png images from the HTML
@@ -1466,7 +1580,7 @@
FORMULA_FONTSIZE = 10
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
+# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
# generated for formulas are transparent PNGs. Transparent PNGs are not
# supported properly for IE 6.0, but are supported on all modern browsers.
#
@@ -1477,8 +1591,14 @@
FORMULA_TRANSPARENT = YES
+# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand
commands
+# to create new LaTeX commands to be used in formulas as building blocks. See
+# the section "Including formulas" for details.
+
+FORMULA_MACROFILE =
+
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
-# http://www.mathjax.org) which uses client side Javascript for the rendering
+# https://www.mathjax.org) which uses client side JavaScript for the rendering
# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
# installed or if you want to formulas look prettier in the HTML output. When
# enabled you may also need to install MathJax separately and configure the
path
@@ -1490,7 +1610,7 @@
# When MathJax is enabled you can set the default output format to be used for
# the MathJax output. See the MathJax site (see:
-# http://docs.mathjax.org/en/latest/output.html) for more details.
+# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details.
# Possible values are: HTML-CSS (which is slower, but has the best
# compatibility), NativeMML (i.e. MathML) and SVG.
# The default value is: HTML-CSS.
@@ -1505,8 +1625,8 @@
# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
# Content Delivery Network so you can quickly see the result without installing
# MathJax. However, it is strongly recommended to install a local copy of
-# MathJax from http://www.mathjax.org before deployment.
-# The default value is: http://cdn.mathjax.org/mathjax/latest.
+# MathJax from https://www.mathjax.org before deployment.
+# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2.
# This tag requires that the tag USE_MATHJAX is set to YES.
MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
@@ -1520,7 +1640,8 @@
# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
# of code that will be used on startup of the MathJax code. See the MathJax
site
-# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# (see:
+# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
# example see the documentation.
# This tag requires that the tag USE_MATHJAX is set to YES.
@@ -1548,7 +1669,7 @@
SEARCHENGINE = NO
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a web server instead of a web client using Javascript.
There
+# implemented using a web server instead of a web client using JavaScript.
There
# are two flavors of web server based searching depending on the
EXTERNAL_SEARCH
# setting. When disabled, doxygen will generate a PHP script for searching and
# an index file used by the script. When EXTERNAL_SEARCH is enabled the
indexing
@@ -1567,7 +1688,8 @@
#
# Doxygen ships with an example indexer (doxyindexer) and search engine
# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/).
+# Xapian (see:
+# https://xapian.org/).
#
# See the section "External Indexing and Searching" for details.
# The default value is: NO.
@@ -1580,8 +1702,9 @@
#
# Doxygen ships with an example indexer (doxyindexer) and search engine
# (doxysearch.cgi) which are based on the open source search engine library
-# Xapian (see: http://xapian.org/). See the section "External Indexing and
-# Searching" for details.
+# Xapian (see:
+# https://xapian.org/). See the section "External Indexing and Searching" for
+# details.
# This tag requires that the tag SEARCHENGINE is set to YES.
SEARCHENGINE_URL =
@@ -1632,21 +1755,35 @@
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked.
#
-# Note that when enabling USE_PDFLATEX this option is only used for generating
-# bitmaps for formulas in the HTML output, but not in the Makefile that is
-# written to the output directory.
-# The default file is: latex.
+# Note that when not enabling USE_PDFLATEX the default is latex when enabling
+# USE_PDFLATEX the default is pdflatex and when in the later case latex is
+# chosen this is overwritten by pdflatex. For specific output languages the
+# default can have been set differently, this depends on the implementation of
+# the output language.
# This tag requires that the tag GENERATE_LATEX is set to YES.
LATEX_CMD_NAME = latex
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
generate
# index for LaTeX.
+# Note: This tag is used in the Makefile / make.bat.
+# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file
+# (.tex).
# The default file is: makeindex.
# This tag requires that the tag GENERATE_LATEX is set to YES.
MAKEINDEX_CMD_NAME = makeindex
+# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to
+# generate index for LaTeX. In case there is no backslash (\) as first
character
+# it will be automatically added in the LaTeX code.
+# Note: This tag is used in the generated output file (.tex).
+# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat.
+# The default value is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_MAKEINDEX_CMD = makeindex
+
# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
# documents. This may be useful for small projects and may help to save some
# trees in general.
@@ -1731,9 +1868,11 @@
PDF_HYPERLINKS = NO
-# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
-# the PDF file directly from the LaTeX files. Set this option to YES, to get a
-# higher quality PDF documentation.
+# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
+# specified with LATEX_CMD_NAME to generate the PDF file directly from the
LaTeX
+# files. Set this option to YES, to get a higher quality PDF documentation.
+#
+# See also section LATEX_CMD_NAME for selecting the engine.
# The default value is: YES.
# This tag requires that the tag GENERATE_LATEX is set to YES.
@@ -1767,7 +1906,7 @@
# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
# bibliography, e.g. plainnat, or ieeetr. See
-# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
# The default value is: plain.
# This tag requires that the tag GENERATE_LATEX is set to YES.
@@ -1781,6 +1920,14 @@
LATEX_TIMESTAMP = NO
+# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
+# path from which the emoji images will be read. If a relative path is entered,
+# it will be relative to the LATEX_OUTPUT directory. If left blank the
+# LATEX_OUTPUT directory will be used.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EMOJI_DIRECTORY =
+
#---------------------------------------------------------------------------
# Configuration options related to the RTF output
#---------------------------------------------------------------------------
@@ -1820,9 +1967,9 @@
RTF_HYPERLINKS = NO
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config
-# file, i.e. a series of assignments. You only have to provide replacements,
-# missing definitions are set to their default value.
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# configuration file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
#
# See also section "Doxygen usage" for information on how to generate the
# default style sheet that doxygen normally uses.
@@ -1831,8 +1978,8 @@
RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an RTF document. Syntax is
-# similar to doxygen's config file. A template extensions file can be generated
-# using doxygen -e rtf extensionFile.
+# similar to doxygen's configuration file. A template extensions file can be
+# generated using doxygen -e rtf extensionFile.
# This tag requires that the tag GENERATE_RTF is set to YES.
RTF_EXTENSIONS_FILE =
@@ -1918,6 +2065,13 @@
XML_PROGRAMLISTING = YES
+# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include
+# namespace members in file scope as well, matching the HTML output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_NS_MEMB_FILE_SCOPE = NO
+
#---------------------------------------------------------------------------
# Configuration options related to the DOCBOOK output
#---------------------------------------------------------------------------
@@ -1950,9 +2104,9 @@
#---------------------------------------------------------------------------
# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sf.net) file that captures the
-# structure of the code including all documentation. Note that this feature is
-# still experimental and incomplete at the moment.
+# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# the structure of the code including all documentation. Note that this feature
+# is still experimental and incomplete at the moment.
# The default value is: NO.
GENERATE_AUTOGEN_DEF = NO
@@ -2122,12 +2276,6 @@
EXTERNAL_PAGES = YES
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of 'which perl').
-# The default file (with absolute path) is: /usr/bin/perl.
-
-PERL_PATH = /usr/bin/perl
-
#---------------------------------------------------------------------------
# Configuration options related to the dot tool
#---------------------------------------------------------------------------
@@ -2141,15 +2289,6 @@
CLASS_DIAGRAMS = YES
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see:
-# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH =
-
# You can include diagrams made with dia in doxygen documentation. Doxygen will
# then run dia to produce the diagram and insert it in the documentation. The
# DIA_PATH tag allows you to specify the directory where the dia binary
resides.
@@ -2247,10 +2386,32 @@
# but if the number exceeds 15, the total amount of fields shown is limited to
# 10.
# Minimum value: 0, maximum value: 100, default value: 10.
-# This tag requires that the tag HAVE_DOT is set to YES.
+# This tag requires that the tag UML_LOOK is set to YES.
UML_LIMIT_NUM_FIELDS = 10
+# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
+# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
+# tag is set to YES, doxygen will add type and arguments for attributes and
+# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
+# will not generate fields with class member information in the UML graphs. The
+# class diagrams will look similar to the default class diagrams but using UML
+# notation for the relationships.
+# Possible values are: NO, YES and NONE.
+# The default value is: NO.
+# This tag requires that the tag UML_LOOK is set to YES.
+
+DOT_UML_DETAILS = NO
+
+# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of
characters
+# to display on a single line. If the actual line length exceeds this threshold
+# significantly it will wrapped across multiple lines. Some heuristics are
apply
+# to avoid ugly line breaks.
+# Minimum value: 0, maximum value: 1000, default value: 17.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_WRAP_THRESHOLD = 17
+
# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
# collaboration graphs will show the relations between templates and their
# instances.
@@ -2442,9 +2603,11 @@
GENERATE_LEGEND = YES
-# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
dot
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
# files that are used to generate the various graphs.
+#
+# Note: This setting is not only used for dot files but also for msc and
+# plantuml temporary files.
# The default value is: YES.
-# This tag requires that the tag HAVE_DOT is set to YES.
DOT_CLEANUP = YES
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/include/osipparser2/headers/osip_authorization.h
new/libosip2-5.3.1/include/osipparser2/headers/osip_authorization.h
--- old/libosip2-5.3.0/include/osipparser2/headers/osip_authorization.h
2020-07-23 20:32:53.000000000 +0200
+++ new/libosip2-5.3.1/include/osipparser2/headers/osip_authorization.h
2022-02-27 11:12:30.000000000 +0100
@@ -57,9 +57,9 @@
char *version; /**< version (optional - NTLM) */
char *targetname; /**< targetname (optional - NTLM) */
char *gssapi_data; /**< gssapi-data (optional - NTLM) */
- char *crand;
- char *cnum;
- char *auth_param; /**< other parameters (optionnal) */
+ char *crand; /**< crand (optional - NTLM) */
+ char *cnum; /**< cnum (optional - NTLM) */
+ char *auth_param; /**< other parameters (optionnal) */
};
#ifdef __cplusplus
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/include/osipparser2/headers/osip_via.h
new/libosip2-5.3.1/include/osipparser2/headers/osip_via.h
--- old/libosip2-5.3.0/include/osipparser2/headers/osip_via.h 2020-07-23
20:32:53.000000000 +0200
+++ new/libosip2-5.3.1/include/osipparser2/headers/osip_via.h 2022-02-27
11:16:35.000000000 +0100
@@ -89,66 +89,66 @@
* @param header The element to work on.
* @param value The value of the element.
*/
-void via_set_version(osip_via_t *header, char *value);
-#define osip_via_set_version via_set_version
+void osip_via_set_version(osip_via_t *header, char *value);
+#define via_set_version osip_via_set_version
/**
* Get the SIP version from a Via header.
* @param header The element to work on.
*/
-char *via_get_version(osip_via_t *header);
-#define osip_via_get_version via_get_version
+char *osip_via_get_version(osip_via_t *header);
+#define via_get_version osip_via_get_version
/**
* Set the protocol in the Via element.
* @param header The element to work on.
* @param value The value of the element.
*/
-void via_set_protocol(osip_via_t *header, char *value);
-#define osip_via_set_protocol via_set_protocol
+void osip_via_set_protocol(osip_via_t *header, char *value);
+#define via_set_protocol osip_via_set_protocol
/**
* Get the protocol from a Via header.
* @param header The element to work on.
*/
-char *via_get_protocol(osip_via_t *header);
-#define osip_via_get_protocol via_get_protocol
+char *osip_via_get_protocol(osip_via_t *header);
+#define via_get_protocol osip_via_get_protocol
/**
* Set the host in the Via element.
* @param header The element to work on.
* @param value The value of the element.
*/
-void via_set_host(osip_via_t *header, char *value);
-#define osip_via_set_host via_set_host
+void osip_via_set_host(osip_via_t *header, char *value);
+#define via_set_host osip_via_set_host
/**
* Get the host from a Via header.
* @param header The element to work on.
*/
-char *via_get_host(osip_via_t *header);
-#define osip_via_get_host via_get_host
+char *osip_via_get_host(osip_via_t *header);
+#define via_get_host osip_via_get_host
/**
* Set the port in the Via element.
* @param header The element to work on.
* @param value The value of the element.
*/
-void via_set_port(osip_via_t *header, char *value);
-#define osip_via_set_port via_set_port
+void osip_via_set_port(osip_via_t *header, char *value);
+#define via_set_port osip_via_set_port
/**
* Get the port from a Via header.
* @param header The element to work on.
*/
-char *via_get_port(osip_via_t *header);
-#define osip_via_get_port via_get_port
+char *osip_via_get_port(osip_via_t *header);
+#define via_get_port osip_via_get_port
/**
* Set the comment in the Via element.
* @param header The element to work on.
* @param value The value of the element.
*/
-void via_set_comment(osip_via_t *header, char *value);
-#define osip_via_set_comment via_set_comment
+void osip_via_set_comment(osip_via_t *header, char *value);
+#define via_set_comment osip_via_set_comment
/**
* Get the comment from a Via header.
* @param header The element to work on.
*/
-char *via_get_comment(osip_via_t *header);
-#define osip_via_get_comment via_get_comment
+char *osip_via_get_comment(osip_via_t *header);
+#define via_get_comment osip_via_get_comment
/**
* Allocate and add a hidden parameter element in a list.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/scripts/compile new/libosip2-5.3.1/scripts/compile
--- old/libosip2-5.3.0/scripts/compile 2021-11-22 16:15:03.000000000 +0100
+++ new/libosip2-5.3.1/scripts/compile 2022-10-12 19:32:53.000000000 +0200
@@ -3,7 +3,7 @@
scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2020 Free Software Foundation, Inc.
# Written by Tom Tromey <tro...@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -53,7 +53,7 @@
MINGW*)
file_conv=mingw
;;
- CYGWIN*)
+ CYGWIN* | MSYS*)
file_conv=cygwin
;;
*)
@@ -67,7 +67,7 @@
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
- cygwin/*)
+ cygwin/* | msys/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/scripts/libtool.m4 new/libosip2-5.3.1/scripts/libtool.m4
--- old/libosip2-5.3.0/scripts/libtool.m4 2021-11-22 16:15:00.000000000
+0100
+++ new/libosip2-5.3.1/scripts/libtool.m4 2022-10-12 19:32:37.000000000
+0200
@@ -1041,8 +1041,8 @@
_LT_EOF
echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
$LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
- echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
- $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cr libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cr libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
$RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
cat > conftest.c << _LT_EOF
@@ -1071,11 +1071,11 @@
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ 10.0,*86*-darwin8*|10.0,*-darwin[[912]]*)
_lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
10.[[012]][[,.]]*)
_lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined
${wl}suppress' ;;
- 10.*)
+ 10.*|11.*)
_lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
@@ -1492,7 +1492,7 @@
m4_defun([_LT_PROG_AR],
[AC_CHECK_TOOLS(AR, [ar], false)
: ${AR=ar}
-: ${AR_FLAGS=cru}
+: ${AR_FLAGS=cr}
_LT_DECL([], [AR], [1], [The archiver])
_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
@@ -4704,6 +4704,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
;;
+ # flang / f18. f95 an alias for gfortran or flang on Debian
+ flang* | f18* | f95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
# icc used to be incompatible with GCC.
# ICC 10 doesn't accept -KPIC any more.
icc* | ifort*)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/scripts/missing new/libosip2-5.3.1/scripts/missing
--- old/libosip2-5.3.0/scripts/missing 2021-11-22 16:15:03.000000000 +0100
+++ new/libosip2-5.3.1/scripts/missing 2022-10-12 19:32:53.000000000 +0200
@@ -3,7 +3,7 @@
scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2020 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pin...@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/src/osipparser2/osip_body.c
new/libosip2-5.3.1/src/osipparser2/osip_body.c
--- old/libosip2-5.3.0/src/osipparser2/osip_body.c 2020-07-23
20:32:53.000000000 +0200
+++ new/libosip2-5.3.1/src/osipparser2/osip_body.c 2022-10-12
19:05:20.000000000 +0200
@@ -237,6 +237,7 @@
i = __osip_find_next_crlf(start_of_line, &end_of_line);
if (i == -2) {
+ return OSIP_SYNTAXERROR;
} else if (i != 0)
return i; /* error case: no end of body found */
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/src/osipparser2/osip_via.c
new/libosip2-5.3.1/src/osipparser2/osip_via.c
--- old/libosip2-5.3.0/src/osipparser2/osip_via.c 2021-01-31
20:44:53.000000000 +0100
+++ new/libosip2-5.3.1/src/osipparser2/osip_via.c 2022-02-27
11:18:35.000000000 +0100
@@ -384,55 +384,55 @@
return OSIP_SUCCESS;
}
-void via_set_version(osip_via_t *via, char *version) {
+void osip_via_set_version(osip_via_t *via, char *version) {
via->version = version;
}
-char *via_get_version(osip_via_t *via) {
+char *osip_via_get_version(osip_via_t *via) {
if (via == NULL)
return NULL;
return via->version;
}
-void via_set_protocol(osip_via_t *via, char *protocol) {
+void osip_via_set_protocol(osip_via_t *via, char *protocol) {
via->protocol = protocol;
}
-char *via_get_protocol(osip_via_t *via) {
+char *osip_via_get_protocol(osip_via_t *via) {
if (via == NULL)
return NULL;
return via->protocol;
}
-void via_set_host(osip_via_t *via, char *host) {
+void osip_via_set_host(osip_via_t *via, char *host) {
via->host = host;
}
-char *via_get_host(osip_via_t *via) {
+char *osip_via_get_host(osip_via_t *via) {
if (via == NULL)
return NULL;
return via->host;
}
-void via_set_port(osip_via_t *via, char *port) {
+void osip_via_set_port(osip_via_t *via, char *port) {
via->port = port;
}
-char *via_get_port(osip_via_t *via) {
+char *osip_via_get_port(osip_via_t *via) {
if (via == NULL)
return NULL;
return via->port;
}
-void via_set_comment(osip_via_t *via, char *comment) {
+void osip_via_set_comment(osip_via_t *via, char *comment) {
via->comment = comment;
}
-char *via_get_comment(osip_via_t *via) {
+char *osip_via_get_comment(osip_via_t *via) {
if (via == NULL)
return NULL;
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/src/test/res/sip-malformed22
new/libosip2-5.3.1/src/test/res/sip-malformed22
--- old/libosip2-5.3.0/src/test/res/sip-malformed22 1970-01-01
01:00:00.000000000 +0100
+++ new/libosip2-5.3.1/src/test/res/sip-malformed22 2022-09-27
11:09:05.000000000 +0200
@@ -0,0 +1,36 @@
+expected_error:-5
+INVITE sip:b...@one.example.com SIP/2.0
+Via: SIP/2.0/UDP sip.example.com;branch=7c337f30d7ce.1
+ ;maddr=239.128.16.254;ttl=16
+Via: SIP/2.0/UDP mouse.wonderland.com
+From: "FIRST, DISPLAYNAME,"<sip:al...@wonderland.com>;tag=
+To: Bob <sip:b...@example.com>
+Call-ID: 602214...@mouse.wonderland.com
+CSeq: 1 INVITE
+Contact: Alice <sip:al...@mouse.wonderland.com>
+Accept: multipart/mixed; boundary=++,application/sdp
+content-type: multipart/mixed; boundary=++
+content-length: 320
+MIME-Version: 1.0
+
+--++
+Content-Type: application/sdp
+
+v=0
+o=user1 53655765 2353687637 IN IP4 128.3.4.5
+s=Mbone Audio
+t=3149328700 0
+i=Discussion of Mbone Engineering Issues
+e=mb...@somewhere.com
+c=IN IP4 224.2.0.1/127
+t=0 0
+m=audio 3456 RTP/AVP 0
+a=rtpmap:0 PCMU/8000
+--++
+Content-Type: application/x-osip-chat
+X-BROKEN-LWS-IN-BODY:
+ THIS IS NOT ALLOWED
+
+Hi guys, this is where i put my signature...just because I want to do it...
+--++--
+
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/src/test/res/sip-malformed22~
new/libosip2-5.3.1/src/test/res/sip-malformed22~
--- old/libosip2-5.3.0/src/test/res/sip-malformed22~ 1970-01-01
01:00:00.000000000 +0100
+++ new/libosip2-5.3.1/src/test/res/sip-malformed22~ 2022-09-27
10:55:37.000000000 +0200
@@ -0,0 +1,50 @@
+INVITE sip:b...@one.example.com SIP/2.0
+Via: SIP/2.0/UDP sip.example.com;branch=7c337f30d7ce.1
+ ;maddr=239.128.16.254;ttl=16
+Via: SIP/2.0/UDP mouse.wonderland.com
+From: "FIRST, DISPLAYNAME,"<sip:al...@wonderland.com>;tag=
+To: Bob <sip:b...@example.com>
+Call-ID: 602214...@mouse.wonderland.com
+CSeq: 1 INVITE
+Contact: Alice <sip:al...@mouse.wonderland.com>
+Call-Info: <http://wwww.example2.com/alice/photo2.jpg> ;purpose=icon2
+ , <http://www.example2.com/alice/> ;purpose=info2
+Call-Info: <http://wwww.example2.com/alice/photo2.jpg> ;purpose=icon2,
+ <http://www.example2.com/alice/> ;purpose=info2
+Call-Info: <http://wwww.example2.com/alice/photo2.jpg> ;purpose=icon2,
+ <http://www.example2.com/alice/> ;purpose=info2
+Call-Info: <http://wwww.example2.com/alice/photo2.jpg> ;purpose=icon2
+ , <http://www.example2.com/alice/> ;purpose=info2
+Call-Info: <http://wwww.example2.com/alice/photo2.jpg> ;purpose=icon2,
<http://www.example2.com/alice/> ;purpose=info2
+Accept-Language: da, en-gb;q=0.8, en;q=0.7
+Accept-Encoding: da, en-gb;sqdsqd=0.343555;q=0.8 ;q=0.8 ;q=0.8
;q=0.8;q=0.8;q=0.8, en;q=0.7
+Subject: \E282AC ERROR IN FROM HEADER WITH 2 DISPLAY-NAME
+Accept: multipart/mixed; boundary=++,application/sdp
+Accept: text/plain; q=0.5, text/html,
+ text/x-dvi; q=0.8, text/x-c
+Accept: audio/*; q=0.2, audio/basic
+Allow: INVITE, ACK , BYE,CANCEL, SUBSCRIBE , NOTIFY
+content-type: multipart/mixed; boundary=++
+content-encoding: gzip, compress
+content-length: 320
+MIME-Version: 1.0
+
+--++
+Content-Type: application/sdp
+
+v=0
+o=user1 53655765 2353687637 IN IP4 128.3.4.5
+s=Mbone Audio
+t=3149328700 0
+i=Discussion of Mbone Engineering Issues
+e=mb...@somewhere.com
+c=IN IP4 224.2.0.1/127
+t=0 0
+m=audio 3456 RTP/AVP 0
+a=rtpmap:0 PCMU/8000
+--++
+Content-Type: application/x-osip-chat
+
+Hi guys, this is where i put my signature...just because I want to do it...
+--++--
+
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/libosip2-5.3.0/src/test/torture.c new/libosip2-5.3.1/src/test/torture.c
--- old/libosip2-5.3.0/src/test/torture.c 2021-05-25 11:43:45.000000000
+0200
+++ new/libosip2-5.3.1/src/test/torture.c 2022-10-12 19:06:07.000000000
+0200
@@ -35,7 +35,7 @@
}
static int read_binary(char **msg, int *len, FILE *torture_file) {
- *msg = (char *) osip_malloc(100000); /* msg are under 100000 */
+ *msg = (char *) osip_malloc(100001); /* msg are under 100000 */
*len = fread(*msg, 1, 100000, torture_file);
return ferror(torture_file) ? -1 : 0;
