--- Begin Message ---
Author: laforge
Date: 2007-06-06 22:32:18 +0200 (Wed, 06 Jun 2007)
New Revision: 2183
Added:
trunk/src/target/kernel/patches/gta02-core.patch
Modified:
trunk/src/target/kernel/patches/series
Log:
baseic (untested) GTA02 machine support
Added: trunk/src/target/kernel/patches/gta02-core.patch
===================================================================
--- trunk/src/target/kernel/patches/gta02-core.patch 2007-06-06 20:18:34 UTC
(rev 2182)
+++ trunk/src/target/kernel/patches/gta02-core.patch 2007-06-06 20:32:18 UTC
(rev 2183)
@@ -0,0 +1,664 @@
+Index: linux-2.6.21.3-moko/arch/arm/mach-s3c2440/mach-gta02.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21.3-moko/arch/arm/mach-s3c2440/mach-gta02.c
+@@ -0,0 +1,604 @@
++/*
++ * linux/arch/arm/mach-s3c2440/mach-gta02.c
++ *
++ * S3C2440 Machine Support for the FIC GTA02 (Neo1973)
++ *
++ * Copyright (C) 2006-2007 by OpenMoko, Inc.
++ * Author: Harald Welte <[EMAIL PROTECTED]>
++ * All rights reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/list.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/serial_core.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/mmc/protocol.h>
++#include <linux/mmc/host.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++
++#include <linux/pcf50633.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++
++#include <asm/arch/regs-serial.h>
++#include <asm/arch/regs-gpio.h>
++#include <asm/arch/regs-gpioj.h>
++#include <asm/arch/fb.h>
++#include <asm/arch/udc.h>
++#include <asm/arch/nand.h>
++#include <asm/arch/mci.h>
++#include <asm/arch/ts.h>
++#include <asm/arch/spi.h>
++#include <asm/arch/spi-gpio.h>
++#include <asm/arch/usb-control.h>
++
++#include <asm/arch/gta02.h>
++
++#include <asm/plat-s3c24xx/devs.h>
++#include <asm/plat-s3c24xx/cpu.h>
++#include <asm/plat-s3c24xx/pm.h>
++
++#include <linux/glamofb.h>
++
++static struct map_desc gta02_iodesc[] __initdata = {
++ {
++ .virtual = 0xe0000000,
++ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000),
++ .length = SZ_1M,
++ .type = MT_DEVICE
++ },
++};
++
++#define UCON S3C2410_UCON_DEFAULT
++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
++
++static struct s3c2410_uartcfg gta02_uartcfgs[] = {
++ [0] = {
++ .hwport = 0,
++ .flags = 0,
++ .ucon = UCON,
++ .ulcon = ULCON,
++ .ufcon = UFCON,
++ },
++ [1] = {
++ .hwport = 1,
++ .flags = 0,
++ .ucon = UCON,
++ .ulcon = ULCON,
++ .ufcon = UFCON,
++ },
++ [2] = {
++ .hwport = 2,
++ .flags = 0,
++ .ucon = UCON,
++ .ulcon = ULCON,
++ .ufcon = UFCON,
++ },
++
++};
++
++/* PMU driver info */
++
++static int pmu_callback(struct device *dev, unsigned int feature,
++ enum pmu_event event)
++{
++ switch (feature) {
++ case PCF50633_FEAT_MBC:
++ switch (event) {
++ case PMU_EVT_INSERT:
++ case PMU_EVT_USB_INSERT:
++ pcf50633_charge_fast(pcf50633_global, 1);
++ break;
++ case PMU_EVT_REMOVE:
++ case PMU_EVT_USB_REMOVE:
++ pcf50633_charge_fast(pcf50633_global, 0);
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ return 0;
++}
++
++static struct pcf50633_platform_data gta02_pcf_pdata = {
++ .used_features = PCF50633_FEAT_MBC |
++ PCF50633_FEAT_BBC |
++ PCF50633_FEAT_RTC |
++ PCF50633_FEAT_CHGCUR |
++ PCF50633_FEAT_BATVOLT |
++ PCF50633_FEAT_BATTEMP,
++ .onkey_seconds_required = 3,
++ .cb = &pmu_callback,
++ .r_fix_batt = 10000,
++ .r_fix_batt_par = 10000,
++ .r_sense_milli = 220,
++ .rails = {
++ [PCF50633_REGULATOR_AUTO] = {
++ .name = "io_3v3",
++ .flags = PMU_VRAIL_F_SUSPEND_ON,
++ .voltage = {
++ .init = 3300,
++ .max = 3300,
++ },
++ },
++ [PCF50633_REGULATOR_DOWN1] = {
++ .name = "core_1v3",
++ .voltage = {
++ .init = 1300,
++ .max = 1600,
++ },
++ },
++ [PCF50633_REGULATOR_DOWN2] = {
++ .name = "core_1v8",
++ .voltage = {
++ .init = 1800,
++ .max = 1800,
++ },
++ },
++ [PCF50633_REGULATOR_HCLDO] = {
++ .name = "sd_3v3",
++ .voltage = {
++ .init = 3300,
++ .max = 3300,
++ },
++ },
++ [PCF50633_REGULATOR_LDO1] = {
++ .name = "stby_1v3",
++ .flags = PMU_VRAIL_F_SUSPEND_ON,
++ .voltage = {
++ .init = 1300,
++ .max = 1330,
++ },
++ },
++ [PCF50633_REGULATOR_LDO2] = {
++ .name = "codec_3v3",
++ .voltage = {
++ .init = 3300,
++ .max = 3300,
++ },
++ },
++ [PCF50633_REGULATOR_LDO3] = {
++ .name = "lcm_3v",
++ .voltage = {
++ .init = 3000,
++ .max = 3000,
++ },
++ },
++ [PCF50633_REGULATOR_LDO4] = {
++ .name = "gl_2v5",
++ .voltage = {
++ .init = 2500,
++ .max = 2500,
++ },
++ },
++ [PCF50633_REGULATOR_LDO5] = {
++ .name = "gl_1v5",
++ .voltage = {
++ .init = 1500,
++ .max = 1500,
++ },
++ },
++ [PCF50633_REGULATOR_LDO6] = {
++ .name = "user1",
++ .voltage = {
++ .init = 0,
++ .max = 3300,
++ },
++ },
++ },
++};
++
++static void cfg_pmu_vrail(struct pmu_voltage_rail *vrail, char *name,
++ unsigned int flags, unsigned int init,
++ unsigned int max)
++{
++ vrail->name = name;
++ vrail->flags = flags;
++ vrail->voltage.init = init;
++ vrail->voltage.max = max;
++}
++
++static void mangle_pmu_pdata_by_system_rev(void)
++{
++ switch (system_rev) {
++ case GTA02v1_SYSTEM_REV:
++ /* FIXME: this is only in v1 due to wrong PMU variant */
++ gta02_pcf_pdata.rails[PCF50633_REGULATOR_DOWN2].flags =
++ PMU_VRAIL_F_SUSPEND_ON;
++ break;
++ default:
++ break;
++ }
++}
++
++static struct resource gta02_pmu_resources[] = {
++ [0] = {
++ .flags = IORESOURCE_IRQ,
++ .start = GTA02_IRQ_PCF50633,
++ .end = GTA02_IRQ_PCF50633,
++ },
++};
++
++struct platform_device gta02_pmu_dev = {
++ .name = "pcf50633",
++ .num_resources = ARRAY_SIZE(gta02_pmu_resources),
++ .resource = gta02_pmu_resources,
++ .dev = {
++ .platform_data = >a02_pcf_pdata,
++ },
++};
++
++static struct platform_device *gta02_devices[] __initdata = {
++ &s3c_device_usb,
++ &s3c_device_wdt,
++ &s3c_device_i2c,
++ &s3c_device_iis,
++ &s3c_device_sdi,
++ &s3c_device_usbgadget,
++ &s3c_device_nand,
++ &s3c_device_ts,
++};
++
++static struct s3c24xx_board gta02_board __initdata = {
++ .devices = gta02_devices,
++ .devices_count = ARRAY_SIZE(gta02_devices)
++};
++
++static struct s3c2410_nand_set gta02_nand_sets[] = {
++ [0] = {
++ .name = "neo1973-nand",
++ .nr_chips = 1,
++ },
++};
++
++/* choose a set of timings which should suit most 512Mbit
++ * chips and beyond.
++ */
++
++static struct s3c2410_platform_nand gta02_nand_info = {
++ .tacls = 20,
++ .twrph0 = 60,
++ .twrph1 = 20,
++ .nr_sets = ARRAY_SIZE(gta02_nand_sets),
++ .sets = gta02_nand_sets,
++};
++
++static void gta02_mmc_set_power(unsigned char power_mode, unsigned short vdd)
++{
++ printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u\n",
++ power_mode, vdd);
++
++ switch (system_rev) {
++ case GTA02v1_SYSTEM_REV:
++ /* FIXME */
++ break;
++ }
++}
++
++static struct s3c24xx_mci_pdata gta02_mmc_cfg = {
++ .gpio_detect = GTA02_GPIO_nSD_DETECT,
++ .set_power = >a02_mmc_set_power,
++ .ocr_avail = MMC_VDD_32_33,
++};
++
++static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
++{
++ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd);
++
++ switch (cmd) {
++ case S3C2410_UDC_P_ENABLE:
++ s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 1);
++ break;
++ case S3C2410_UDC_P_DISABLE:
++ s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 0);
++ break;
++ case S3C2410_UDC_P_RESET:
++ /* FIXME! */
++ break;
++ default:
++ break;
++ }
++}
++
++/* use a work queue, since I2C API inherently schedules
++ * and we get called in hardirq context from UDC driver */
++
++struct vbus_draw {
++ struct work_struct work;
++ int ma;
++};
++static struct vbus_draw gta02_udc_vbus_drawer;
++
++static void __gta02_udc_vbus_draw(struct work_struct *work)
++{
++ if (gta02_udc_vbus_drawer.ma >= 500) {
++ /* enable fast charge */
++ printk(KERN_DEBUG "udc: enabling fast charge\n");
++ pcf50633_charge_fast(pcf50633_global, 1);
++ } else {
++ /* disable fast charge */
++ printk(KERN_DEBUG "udc: disabling fast charge\n");
++ pcf50633_charge_fast(pcf50633_global, 0);
++ }
++}
++
++static int gta02_udc_vbus_draw(unsigned int ma)
++{
++ gta02_udc_vbus_drawer.ma = ma;
++ schedule_work(>a02_udc_vbus_drawer.work);
++
++ return 0;
++}
++
++static struct s3c2410_udc_mach_info gta02_udc_cfg = {
++ .vbus_draw = gta02_udc_vbus_draw,
++ .udc_command = gta02_udc_command,
++
++};
++
++static struct s3c2410_ts_mach_info gta02_ts_cfg = {
++ .delay = 10000,
++ .presc = 49,
++ .oversampling_shift = 2,
++};
++
++/* SPI */
++
++#if 0
++static struct spi_board_info gta01_spi_board_info[] __initdata = {
++ {
++ .modalias = "jbt6k74",
++ /* platform_data */
++ /* controller_data */
++ /* irq */
++ .max_speed_hz = 10 * 1000 * 1000,
++ .bus_num = 1,
++ /* chip_select */
++ },
++};
++
++
++#ifdef SPI_HARD
++static struct s3c2410_spi_info spi_cfg = {
++ .pin_cs = S3C2410_GPG3,
++ .board_size = ARRAY_SIZE(gta01_spi_board_info),
++ .board_info = gta01_spi_board_info,
++};
++#else
++static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
++{
++ switch (cs) {
++ case BITBANG_CS_ACTIVE:
++ s3c2410_gpio_setpin(S3C2410_GPG3, 0);
++ break;
++ case BITBANG_CS_INACTIVE:
++ s3c2410_gpio_setpin(S3C2410_GPG3, 1);
++ break;
++ }
++}
++
++static struct s3c2410_spigpio_info spi_gpio_cfg = {
++ .pin_clk = S3C2410_GPG7,
++ .pin_mosi = S3C2410_GPG6,
++ .pin_miso = S3C2410_GPG5,
++ .board_size = ARRAY_SIZE(gta01_spi_board_info),
++ .board_info = gta01_spi_board_info,
++ .chip_select = &spi_gpio_cs,
++};
++
++static struct resource s3c_spi_lcm_resource[] = {
++ [0] = {
++ .start = S3C2410_GPG3,
++ .end = S3C2410_GPG3,
++ },
++ [1] = {
++ .start = S3C2410_GPG5,
++ .end = S3C2410_GPG5,
++ },
++ [2] = {
++ .start = S3C2410_GPG6,
++ .end = S3C2410_GPG6,
++ },
++ [3] = {
++ .start = S3C2410_GPG7,
++ .end = S3C2410_GPG7,
++ },
++};
++
++struct platform_device s3c_device_spi_lcm = {
++ .name = "s3c24xx-spi-gpio",
++ .id = 1,
++ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource),
++ .resource = s3c_spi_lcm_resource,
++ .dev = {
++ .platform_data = &spi_gpio_cfg,
++ },
++};
++#endif
++#endif
++
++static struct resource gta02_led_resources[] = {
++ [0] = {
++ .start = GTA02_GPIO_VIBRATOR_ON,
++ .end = GTA02_GPIO_VIBRATOR_ON,
++ },
++ /* FIXME */
++};
++
++struct platform_device gta02_led_dev = {
++ .name = "gta01-led",
++ .num_resources = ARRAY_SIZE(gta02_led_resources),
++ .resource = gta02_led_resources,
++};
++
++static struct resource gta01_button_resources[] = {
++ [0] = {
++ .start = GTA02_GPIO_AUX_KEY,
++ .end = GTA02_GPIO_AUX_KEY,
++ },
++ [1] = {
++ .start = GTA02_GPIO_HOLD_KEY,
++ .end = GTA02_GPIO_HOLD_KEY,
++ },
++ [2] = {
++ .start = GTA02_GPIO_JACK_INSERT,
++ .end = GTA02_GPIO_JACK_INSERT,
++ },
++};
++
++struct platform_device gta01_button_dev = {
++ .name = "gta01-button",
++ .num_resources = ARRAY_SIZE(gta01_button_resources),
++ .resource = gta01_button_resources,
++};
++
++static struct platform_device gta01_pm_gsm_dev = {
++ .name = "gta01-pm-gsm",
++};
++
++/* USB */
++static struct s3c2410_hcd_info gta02_usb_info = {
++ .port[0] = {
++ .flags = S3C_HCDFLG_USED,
++ },
++ .port[1] = {
++ .flags = 0,
++ },
++};
++
++/* Smedia Glamo 3362 */
++
++static struct glamofb_platform_data gta02_glamo_pdata = {
++ .width = 480,
++ .height = 640,
++ .xres = {
++ .min = 240,
++ .max = 480,
++ .defval = 480,
++ },
++ .yres = {
++ .min = 320,
++ .max = 640,
++ .defval = 640,
++ },
++ .bpp = {
++ .min = 16,
++ .max = 16,
++ .defval = 16,
++ },
++};
++
++static struct resource gta02_glamo_resources[] = {
++ [0] = {
++ .start = S3C2410_CS1,
++ .end = S3C2410_CS1 + 0x800000,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = GTA02_IRQ_3D,
++ .end = GTA02_IRQ_3D,
++ .flags = IORESOURCE_IRQ,
++ },
++ [2] = {
++ .start = GTA02_GPIO_3D_RESET,
++ .end = GTA02_GPIO_3D_RESET,
++ },
++};
++
++static struct platform_device gta02_glamo_dev = {
++ .name = "glamo3362",
++ .num_resources = ARRAY_SIZE(gta02_glamo_resources),
++ .resource = gta02_glamo_resources,
++ .dev = {
++ .platform_data = >a02_glamo_pdata,
++ },
++};
++
++static void __init gta02_map_io(void)
++{
++ s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
++ s3c24xx_init_clocks(16934400);
++ s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
++ s3c24xx_set_board(>a02_board);
++}
++
++static irqreturn_t gta02_modem_irq(int irq, void *param)
++{
++ printk(KERN_DEBUG "modem wakeup interrupt\n");
++ return IRQ_HANDLED;
++}
++
++static void __init gta02_machine_init(void)
++{
++ s3c_device_usb.dev.platform_data = >a02_usb_info;
++ s3c_device_nand.dev.platform_data = >a02_nand_info;
++ s3c_device_sdi.dev.platform_data = >a02_mmc_cfg;
++
++ INIT_WORK(>a02_udc_vbus_drawer.work, __gta02_udc_vbus_draw);
++ s3c24xx_udc_set_platdata(>a02_udc_cfg);
++ set_s3c2410ts_info(>a02_ts_cfg);
++
++ platform_device_register(>a01_button_dev);
++ platform_device_register(>a01_pm_gsm_dev);
++
++ mangle_pmu_pdata_by_system_rev();
++ platform_device_register(>a02_pmu_dev);
++ platform_device_register(>a02_led_dev);
++ platform_device_register(>a02_glamo_dev);
++
++ s3c2410_pm_init();
++
++ set_irq_type(GTA02_IRQ_MODEM, IRQT_RISING);
++ request_irq(GTA02_IRQ_MODEM, gta02_modem_irq,
++ SA_INTERRUPT, "modem", NULL);
++ enable_irq_wake(GTA02_IRQ_MODEM);
++}
++
++MACHINE_START(NEO1973_GTA02, "GTA02")
++ .phys_io = S3C2410_PA_UART,
++ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
++ .boot_params = S3C2410_SDRAM_PA + 0x100,
++ .map_io = gta02_map_io,
++ .init_irq = s3c24xx_init_irq,
++ .init_machine = gta02_machine_init,
++ .timer = &s3c24xx_timer,
++MACHINE_END
+Index: linux-2.6.21.3-moko/include/asm-arm/arch-s3c2410/gta02.h
+===================================================================
+--- /dev/null
++++ linux-2.6.21.3-moko/include/asm-arm/arch-s3c2410/gta02.h
+@@ -0,0 +1,24 @@
++#ifndef _GTA02_H
++#define _GTA02_H
++
++#include <asm/arch/regs-gpio.h>
++#include <asm/arch/irqs.h>
++
++/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
++#define GTA02v1_SYSTEM_REV 0x00000310
++#define GTA02v2_SYSTEM_REV 0x00000320
++
++#define GTA02_GPIO_3D_IRQ S3C2410_GPG4
++#define GTA02_GPIO_3D_RESET S3C2440_GPJ0
++#define GTA02_GPIO_nSD_DETECT S3C2410_GPF5
++#define GTA02_GPIO_USB_PULLUP S3C2410_GPB9
++#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB3
++#define GTA02_GPIO_HOLD_KEY S3C2410_GPF7
++#define GTA02_GPIO_AUX_KEY S3C2410_GPF6
++#define GTA02_GPIO_JACK_INSERT S3C2410_GPF4
++
++#define GTA02_IRQ_MODEM IRQ_EINT1
++#define GTA02_IRQ_3D IRQ_EINT12
++#define GTA02_IRQ_PCF50633 IRQ_EINT9
++
++#endif /* _GTA02_H */
+Index: linux-2.6.21.3-moko/arch/arm/mach-s3c2440/Kconfig
+===================================================================
+--- linux-2.6.21.3-moko.orig/arch/arm/mach-s3c2440/Kconfig
++++ linux-2.6.21.3-moko/arch/arm/mach-s3c2440/Kconfig
+@@ -73,5 +73,12 @@
+ help
+ Say Y here if you are using the FIC Neo1973 GSM Phone
+
++config MACH_NEO1973_GTA02
++ bool "FIC Neo1973 GSM Phone (GTA02 Hardware)"
++ select CPU_S3C2440
++ select SENSORS_PCF50633
++ help
++ Say Y here if you are using the FIC Neo1973 GSM Phone
++
+ endmenu
+
+Index: linux-2.6.21.3-moko/arch/arm/mach-s3c2440/Makefile
+===================================================================
+--- linux-2.6.21.3-moko.orig/arch/arm/mach-s3c2440/Makefile
++++ linux-2.6.21.3-moko/arch/arm/mach-s3c2440/Makefile
+@@ -22,3 +22,4 @@
+ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
+ obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
+ obj-$(CONFIG_MACH_HXD8) += mach-hxd8.o
++obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
Modified: trunk/src/target/kernel/patches/series
===================================================================
--- trunk/src/target/kernel/patches/series 2007-06-06 20:18:34 UTC (rev
2182)
+++ trunk/src/target/kernel/patches/series 2007-06-06 20:32:18 UTC (rev
2183)
@@ -38,3 +38,4 @@
hxd8-tsl256x.patch
pcf50633.patch
smedia-glamo.patch
+gta02-core.patch
--- End Message ---
