Send commitlog mailing list submissions to
commitlog@lists.openmoko.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/commitlog
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of commitlog digest..."
Today's Topics:
1. development kernel tree: Changes to 'andy' ([EMAIL PROTECTED])
2. development kernel tree: Changes to 'debug' ([EMAIL PROTECTED])
3. development kernel tree: Changes to 'andy' ([EMAIL PROTECTED])
4. Holger's qtopia repo: Changes to 'master' ([EMAIL PROTECTED])
5. Holger's qtopia repo: Changes to 'master' ([EMAIL PROTECTED])
6. Openmoko's OpenEmbedded repository. This is used to build the
Openmoko distribution: Changes to 'org.openmoko.asu.dev'
([EMAIL PROTECTED])
7. Openmoko's OpenEmbedded repository. This is used to build the
Openmoko distribution: Changes to 'org.openmoko.asu.stable'
([EMAIL PROTECTED])
8. Openmoko's OpenEmbedded repository. This is used to build the
Openmoko distribution: Changes to 'org.openmoko.asu.stable'
([EMAIL PROTECTED])
--- Begin Message ---
drivers/mfd/glamo/glamo-mci.c | 126 +++++++++++++++++++++++++++++------------
1 files changed, 89 insertions(+), 37 deletions(-)
New commits:
commit 5cb541702a40dc61fababe4613f6838df1c2acbd
Author: Andy Green <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:12:43 2008 +0100
fix-force-sdcard-clk-off-when-idle.patch
Existing Glamo bit for stopping SD Card Clock when there is no
transfer taking place does not work. This patch adds stuff around
the transfer code to force the SD clock up when something is going on
and down when it is idle. This'll save a little power and noise ;-)
I tested it briefly and was able to SD Boot normally on Sandisk 512M.
Wider testing is appreciated.
Signed-off-by: Andy Green <[EMAIL PROTECTED]>
--- End Message ---
--- Begin Message ---
Rebased ref, commits from common ancestor:
commit 354d70ded5f981eee877348c038d3ef7479c7998
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:03 2008 +0100
clean-gsm-flow-control.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
arch/arm/plat-s3c24xx/neo1973_pm_gsm.c | 52 +-------
drivers/serial/s3c2410.c | 204
+++-----------------------------
2 files changed, 24 insertions(+), 232 deletions(-)
commit 3a81954ca704fa59dc7ebca9dfb9c5398417b3e3
Author: Andy Green <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:03 2008 +0100
mw09_style_fixes.patch
Signed-off-by: Andy Green <[EMAIL PROTECTED]>
commit 70cc3faffee32d82eaa4c1827a1da63985749cc3
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:03 2008 +0100
mw09f_gsm_interrupt_handling_4.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit 45ad89d68d921f5c6071c4ea38d6a5f1668684c4
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:03 2008 +0100
mw09f_gsm_interrupt_handling_3.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit 5e435e8bd92cdfbbf820a1856f228a2399e5a633
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:03 2008 +0100
mw09f_gsm_interrupt_handling_2.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit 1cd2f5e81bfb0ea6dae111fa62082b70fecb6302
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:03 2008 +0100
mw09f_gsm_interrupt_handling_1.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit 6651b99acecea4c4076a6c07d51099ad89241c98
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:02 2008 +0100
mw09e_gsm_serial_mctrl.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit e711657d8a5156938d7ff1cecb6a99e0069aba9d
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:02 2008 +0100
mw09d_gta01_serial_readhack_1.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit ca042c14949f5519cef5615643f9213ae532c66d
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:02 2008 +0100
mw09c_gsm_flowcontrol.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit d6b5a02c5a2a705929a191f50315e7d6c489ac7b
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:02 2008 +0100
mw09a_log_serial_errors.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit 83d035077a52037447436bc1f91f84b17440c3cc
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:02 2008 +0100
mw09a_gta01_UART_threshold.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit e4548c9101bc415167b87956cee47f24e330763a
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:02 2008 +0100
mw09a_gta01_console_disable_2.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit 7f51ad704162967a0b3f7ba874865cfac9828884
Author: Mike Westerhof <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:02 2008 +0100
mw09a_gta01_console_disable_1.patch
Signed-off-by: Mike Westerhof <[EMAIL PROTECTED]>
commit d0d26ed9fa31c4aba7641f06f37be7031e1d5fa8
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:01 2008 +0100
PATCH-9_9-gta01-Tweak-pixclock-to-reduce-flicker-with-cpufreq.eml
Experimenting with a GTA01 showed pixclock values near 40000 (after the
rounding caused by the divider calculation) caused visible flicker. Values
near 20000 caused only a slight flicker, and the default value after
rounding
with the default HCLK frequency of 133MHz is 30075.
Change the value to 35000 to make it stay in the range 17500-35000 and thus
reduce the flicker a bit.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit 57dd34b147a6b7198db77935b3395d5ce8d13852
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:01 2008 +0100
PATCH-8_9-Experimental-S3C2410A-cpufreq-driver-fb-.eml
This is the cpufreq notifier for the S3C2410 framebuffer driver.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit 295e5c5c22db8cc00e87dd7d9fa2dbfb97f32893
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:01 2008 +0100
PATCH-7_9-Experimental-S3C2410A-cpufreq-driver-serial-.eml
This is the cpufreq notifier for the S3C2410 serial driver.
It uses the hardware flow control, when available, to avoid losing
characters
during the transition.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit adacb1b608b5636e7b059ba30b0d1ccc8c1fd341
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:01 2008 +0100
PATCH-6_9-s3c2410-serial-move-divisor-calculation-to-separate-function.eml
The cpufreq notifier for the S3C2410 serial driver has to recalculate the
baud rate divisor. The code which does the calculation is currently part of
s3c24xx_serial_set_termios. Split it off to a separate function.
Code movement only, no functional changes.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit 497018880ff01901070d1e313d2b8dd619bdcd28
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:01 2008 +0100
PATCH-5_9-Experimental-S3C2410A-cpufreq-driver-nand-.eml
This is the cpufreq notifier for the S3C2410 NAND driver.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit 679d696a7b7ffa66aa6701f8dc2e4e1e4fbb4767
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:00 2008 +0100
PATCH-4_9-Experimental-S3C2410A-cpufreq-driver-timer-.eml
This is the cpufreq notifier for the S3C2410 timer code.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit 1a696fd67ad30ec5d34feb19f0ce0e71d79bfdc2
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:00 2008 +0100
PATCH-3_9-cpufreq-Warn-whem-cpufreq_register_notifier-called-before-pure-initcalls.eml
If cpufreq_register_notifier is called before pure initcalls,
init_cpufreq_transition_notifier_list will overwrite whatever it did,
causing notifiers to be ignored.
Print some noise to the kernel log if that happens.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit e202df25cc663804f40a9d6ec1da43997ae4ec8e
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:00 2008 +0100
PATCH-2_9-Experimental-S3C2410A-cpufreq-driver-core-.eml
This is a cpufreq driver for the S3C2410A. It deals only with the main
frequency switching part and with the SDRAM refresh counter. The rest of the
hardware should be dealt with via cpufreq notifiers on each of the drivers.
It also has experimental support for the S3C2442.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit 50880ea4642930417300d6312a3a332be0b65b1b
Author: Cesar Eduardo Barros <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:28:00 2008 +0100
PATCH-1_9-cpufreq-fix-show_trans_table.eml
Fix show_trans_table when it overflows PAGE_SIZE.
* Not all snprintf calls were protected against being passed a negative
length.
* When show_trans_table overflows, len might be > PAGE_SIZE. In that case,
returns PAGE_SIZE.
Signed-off-by: Cesar Eduardo Barros <[EMAIL PROTECTED]>
commit bc3e95ac9e642f12a99d6a67312b40f41e71d739
Author: warmcat <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:27:59 2008 +0100
local-config-cpufreq.patch
commit 5cb541702a40dc61fababe4613f6838df1c2acbd
Author: Andy Green <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:12:43 2008 +0100
fix-force-sdcard-clk-off-when-idle.patch
Existing Glamo bit for stopping SD Card Clock when there is no
transfer taking place does not work. This patch adds stuff around
the transfer code to force the SD clock up when something is going on
and down when it is idle. This'll save a little power and noise ;-)
I tested it briefly and was able to SD Boot normally on Sandisk 512M.
Wider testing is appreciated.
Signed-off-by: Andy Green <[EMAIL PROTECTED]>
--- End Message ---
--- Begin Message ---
drivers/mfd/glamo/glamo-mci.c | 38 +++++++++++++++++++++++++++++---------
1 files changed, 29 insertions(+), 9 deletions(-)
New commits:
commit 0fd3c053ed7c4025890bb06640920d74fadc73a9
Author: Andy Green <[EMAIL PROTECTED]>
Date: Tue Jul 15 17:18:40 2008 +0100
add-limit-sdcard-clk-cmdline.patch
This patch allows you to control the maximum clock rate that will
be selected for SD Card access, from the kernel commandline using
glamo_mci.sd_max_clk=10000000
and also from
echo 10000000 > /sys/module/glamo_mci/parameters/sd_max_clk
although you have to suspend and resume to make the limit operational
on the actual SD_CLK line.
Clocks that are possible are divided down from ~50MHz, so 25000000,
16666666, 12500000, 10000000, etc. With Freerunner A5 revision that
has 100R series resistors in SD Card signals, I didn't get reliable
operation above 16MHz. With A6 revision the series resistors went
down to 75R, maybe it can work at 25MHz.
Reducing the clock rate is something to try if you find that your
SD Card is not communicating properly with the default speed.
Signed-off-by: Andy Green <[EMAIL PROTECTED]>
--- End Message ---
--- Begin Message ---
src/libraries/qtopia/qsoftmenubar.cpp | 93 ++++++++++++++++++--
.../phone/callscreen/semithemed/callscreen.cpp | 87 ++++++++-----------
.../phone/callscreen/semithemed/callscreen.h | 8 +--
3 files changed, 126 insertions(+), 62 deletions(-)
New commits:
commit a2808905d337db85b0cb6e2c7844ef1e9df24db6
Author: Holger Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 20:23:57 2008 +0200
[softmenu] Disable/Enable the "Options" entry depending on having options
Do not show the "Options" entry if we have no options at all. Also
update this when we get options. E.g. by adding, removing or making
actions visible. A performance optimisation could be to check if we
are already showing the right thing. This might be done as deep as
in the ContextKeyManager helper implementation.
(Semi tested)
commit 9de6c2b5db5a43da8ae120d42806bb0fe472ed71
Author: Holger Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 18:58:02 2008 +0200
[softmenu] Move the widget type check up
Move the isWidgetType() check into the big guard. This will
make the following changes look better.
commit 741502c038067d485ed574c66235ffc55a1752a9
Author: Holger Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 17:35:43 2008 +0200
[softmenu] Do not show empty menus
Do not show a QMenu that has no visible content. When there is no
help entry some menu's will be completely empty. Never show an empty
menu. The other part will be to remove the "Options" caption as well
but clicking this button would still send a default keycode anyway
and we would still show the empty menu.
commit bfd1f6cfb604e8ca52d4685542f50ceee13f460d
Author: Holger Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 17:18:58 2008 +0200
[power management] Do not suspend the device when we have active calls
Communicate with the ompower application. Request the CPU if we have
call activity and release the CPU when the calls are all gone.
(untested)
commit c5e172dc8df8438efe9c9bc7c646a07f82658e30
Author: Holger Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 16:19:10 2008 +0200
[qtopia] Do not launch a command on call changes. We will use dbus...
--- End Message ---
--- Begin Message ---
src/libraries/qtopiaphonemodem/qmodemsmsreader.cpp | 27 +++++++++++--------
src/server/phone/phonestatusdbusexporter.cpp | 3 ++
.../callpolicymanager/cell/cellmodemmanager.cpp | 10 ++++++-
.../callpolicymanager/cell/cellmodemmanager.h | 1 +
4 files changed, 28 insertions(+), 13 deletions(-)
New commits:
commit 2660ab006dd50beab8afc0bb77ae77a397e18037
Author: Holger Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 22:13:36 2008 +0200
[gsm] SMS initialisation fails with my TI calypso
After having fixed the CFUN issue the initial SMS listing and reading
failed. The two issued commands were only issued once and the SIM BUSY
CMS ERROR was ignored.
Change the code to issue the CPMS as retry chat and once it succeeds
send the +CMGL command (think of a state machine and transitions). It is
assumed that after the +CPMS succeeds the SIM is properly initialized
and
happy to operate so a QRetryChat is not used for the message listing
command.
After this patch modem initialisation is working with my TI Calypso from
cold boot again. I still have no clue how I managed to upset my modem
to give me this behaviour.
Log file:
AtChat : T : "AT+CNMI=?"
AtChat : F : "+CNMI: (0-2),(0-3),(0,2),(0,1),(0,1)"
AtChat : F : "OK"
AtChat : T : "AT+CMGF=0"
AtChat : F : "OK"
AtChat : T : "AT+CPMS="SM""
AtChat : F : "+CMS ERROR: 314"
AtChat : T : "AT+CMGL=4"
AtChat : F : "+CMS ERROR: 314"
AtChat : T : "AT+CNMI=2,1,2,0,0"
AtChat : F : "+CMS ERROR: 314"
AtChat : T : "AT+CPBS=?"
AtChat : F : "+CPBS: ("EN","BD","FD","DC","LD","RC","LR","MT","AD","SM","SD
AtChat : F : "OK"
AtChat : T : "AT+CPBS="EN""
AtChat : F : "OK"
AtChat : T : "AT+CPBR=?"
AtChat : F : "+CPBR: (1-5),44,0"
AtChat : F : "OK"
AtChat : T : "AT+CPBR=1,5"
AtChat : F : "OK"
AtChat : T : "AT+CNMI=2,1,2,0,0"
AtChat : F : "+CMS ERROR: 314"
commit 153d3809db78d978a742d27bfb9930866a1b8dee
Author: Holger Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 21:28:24 2008 +0200
[phone] At least emit something on startup
The question is what should be emitted at startup. Nothing? Everything?
Clients
should get the owner changed dbus notification once we are started and
can
connect to our signals... As a compromise send an updated signal
strength
as well as it might help illume to pick us up (it is the only info it is
currently using).
commit 2cf9d267bc415c91cbbe815746b14332a5bcafb2
Author: Holger Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 21:19:47 2008 +0200
[gsm] Do not immediately fire the next CFUN but give the modem some time...
Do not immediately send another CFUN to the modem but wait a second
to let the modem settle and then send the next command.
--- End Message ---
--- Begin Message ---
conf/distro/include/sane-srcrevs.inc | 2 +-
.../qtopia-phone-x11/om-gta01/Xsession.d/89qtopia | 4 +---
.../qtopia-phone-x11/om-gta02/Xsession.d/89qtopia | 4 +---
packages/qtopia-phone/qtopia-phone-x11_git.bb | 2 +-
packages/tasks/task-openmoko-qtopia-x11.bb | 3 +--
5 files changed, 5 insertions(+), 10 deletions(-)
New commits:
commit 30138c231a785657cb9ecaa9b401348abdbd1e00
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 22:24:48 2008 +0200
[srcrev] Upgrade Qtopia to a version with various fixes
- Work with my upset modem, make init robust
- Cope with not having help installed (empty option menus)
commit 773100b58d87ccd8238974bba00babb1f6c7d409
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 07:34:07 2008 +0200
[qtopia] Remove the helpbrowser from the image. Qtopia should disable the
Help entry
If the helpbrowser/service is not installed Qtopia should stop showing
the
help entry in the softmenu. A user can install the help to get this
feature
back.
commit 0ac52fc2a0953fd7332f35c60c8076a4614f7f00
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 07:33:23 2008 +0200
[qtopia] The app to inform illume about incoming calls was never
implemented, remove
Remove trace of the environment variable as it was never used.
commit 7df69fb05363ba7e30be0c45be90d146d76e6bce
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 07:01:33 2008 +0200
[qtopia] Pipe the output of qpe through the "logger" utility
logger is provided by busybox. If logger is not present on the
device launching of Qtopia will fail.
--- End Message ---
--- Begin Message ---
packages/tasks/task-openmoko-asu-feed.bb | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
New commits:
commit cc3edb75c5c4dcaa40eebdc59de61fcb7c1e4d86
Author: Julian_chu <[EMAIL PROTECTED]>
Date: Tue Jul 15 22:03:50 2008 +0800
[openmoko-asu-feed] Fix a stupid mistake
diversity-nav_svn.bb -> diversity-nav
--- End Message ---
--- Begin Message ---
conf/distro/include/sane-srcrevs.inc | 4 ++--
.../qtopia-phone-x11/om-gta01/Xsession.d/89qtopia | 4 +---
.../qtopia-phone-x11/om-gta02/Xsession.d/89qtopia | 4 +---
packages/qtopia-phone/qtopia-phone-x11_git.bb | 2 +-
packages/tasks/task-openmoko-qtopia-x11.bb | 3 +--
5 files changed, 6 insertions(+), 11 deletions(-)
New commits:
commit 4adf85030a6eb3c7e26ab056f3d466ddd4c7e9e7
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Mon Jul 14 16:31:34 2008 +0200
[srcrev] Attempt at a stable kernel update.
commit ab6665bf632257a65498ef4742ab156050d6f06c
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 22:24:48 2008 +0200
[srcrev] Upgrade Qtopia to a version with various fixes
- Work with my upset modem, make init robust
- Cope with not having help installed (empty option menus)
commit 6e896b8cc93eb152b01dc763ac5bb2f4caff3670
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 07:34:07 2008 +0200
[qtopia] Remove the helpbrowser from the image. Qtopia should disable the
Help entry
If the helpbrowser/service is not installed Qtopia should stop showing
the
help entry in the softmenu. A user can install the help to get this
feature
back.
commit 3b5f54e4c17b0fc2aae63006800fbb6ebc588ec9
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 07:33:23 2008 +0200
[qtopia] The app to inform illume about incoming calls was never
implemented, remove
Remove trace of the environment variable as it was never used.
commit 45c722de67010c04cc62d73c1f7faef6e086d09b
Author: Holger Hans Peter Freyther <[EMAIL PROTECTED]>
Date: Tue Jul 15 07:01:33 2008 +0200
[qtopia] Pipe the output of qpe through the "logger" utility
logger is provided by busybox. If logger is not present on the
device launching of Qtopia will fail.
--- End Message ---
_______________________________________________
commitlog mailing list
commitlog@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/commitlog
