--- Begin Message ---
Author: charlie
Date: 2008-11-10 11:59:31 +0100 (Mon, 10 Nov 2008)
New Revision: 4776
Added:
developers/charlie/Tests/gsm/mux.py
Modified:
developers/charlie/Tests/gsm/test.py
Log:
Updated GSM modem test script
Added: developers/charlie/Tests/gsm/mux.py
===================================================================
--- developers/charlie/Tests/gsm/mux.py (rev 0)
+++ developers/charlie/Tests/gsm/mux.py 2008-11-10 10:59:31 UTC (rev 4776)
@@ -0,0 +1,68 @@
+# GPL licence copyright openmoko
+# [EMAIL PROTECTED]
+
+"""Multiplexer module
+
+This module contains functions that can be used to pass the modem into
+multiplexer mode. It is experimental, not intended to be actually used
+in the factory testing suite.
+"""
+
+
+EA = 0x01
+CR = 0x02
+SABM = 0x2f
+PF = 0x10
+CLD = 0xC1
+
+crc_table = [
+ 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED,
+ 0x7C, 0x09, 0x98, 0xEA, 0x7B, 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A,
+ 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67, 0x38,
+ 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44,
+ 0x31, 0xA0, 0xD2, 0x43, 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0,
+ 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F, 0x70, 0xE1,
+ 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79,
+ 0xE8, 0x9A, 0x0B, 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19,
+ 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17, 0x48, 0xD9, 0xAB,
+ 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0,
+ 0xA2, 0x33, 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A,
+ 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F, 0xE0, 0x71, 0x03, 0x92,
+ 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A,
+ 0x9B, 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63,
+ 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87, 0xD8, 0x49, 0x3B, 0xAA, 0xDF,
+ 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
+ 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29,
+ 0xB8, 0xCD, 0x5C, 0x2E, 0xBF, 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06,
+ 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB, 0x8C,
+ 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0,
+ 0x85, 0x14, 0x66, 0xF7, 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C,
+ 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3, 0xB4, 0x25,
+ 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD,
+ 0x2C, 0x5E, 0xCF]
+
+
+def calc_crc(msg):
+ fcs = 0xff
+ for c in msg:
+ fcs = crc_table[fcs ^ ord(c)]
+ return 0xff - fcs
+
+
+def format_frame(s):
+ return ''.join(['%02X' % ord(c) for c in s])
+
+
+def send_frame(file, channel, data, type):
+ msg = chr(0xf9) * 2
+ print 'sending "%s"' % format_frame(msg)
+ print file.write(msg)
+ # Then we create the address field
+ address = EA | CR | (channel & 63) << 2
+ # The type field
+ msg = chr(address) + chr(type)
+ # CRC
+ crc = chr(calc_crc(msg))
+ msg = '\x7e' + msg + crc + '\x7e'
+ print 'sending "%s"' % format_frame(msg)
+ print file.write(msg)
Modified: developers/charlie/Tests/gsm/test.py
===================================================================
--- developers/charlie/Tests/gsm/test.py 2008-11-09 19:39:20 UTC (rev
4775)
+++ developers/charlie/Tests/gsm/test.py 2008-11-10 10:59:31 UTC (rev
4776)
@@ -2,120 +2,148 @@
# GPL licence copyright openmoko
# [EMAIL PROTECTED]
-# This is just a test... Very ugly and un-pythonic structure... Please
-# don't use it. The idea is to find a way to write hadware independant
-# modem intialization, so the user space can start communicating with
-# any GSM modem. I want to cover both TI Calypso and Siemens MC75i.
+"""GSM modem testing script
+This script will try to initialize the modem and then communicate with
+it. The goal is to make it work with both the TI calypso and Siemens
+MC75i modems.
+"""
+
import time
import sys
+import serial
-EA = 0x01
-CR = 0x02
-SABM = 0x2f
-PF = 0x10
-CLD = 0xC1
+import logging
+logger = logging.getLogger('test')
-crc_table = [
- 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED,
- 0x7C, 0x09, 0x98, 0xEA, 0x7B, 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A,
- 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67, 0x38,
- 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44,
- 0x31, 0xA0, 0xD2, 0x43, 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0,
- 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F, 0x70, 0xE1,
- 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79,
- 0xE8, 0x9A, 0x0B, 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19,
- 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17, 0x48, 0xD9, 0xAB,
- 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0,
- 0xA2, 0x33, 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A,
- 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F, 0xE0, 0x71, 0x03, 0x92,
- 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A,
- 0x9B, 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63,
- 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87, 0xD8, 0x49, 0x3B, 0xAA, 0xDF,
- 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
- 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29,
- 0xB8, 0xCD, 0x5C, 0x2E, 0xBF, 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06,
- 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB, 0x8C,
- 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0,
- 0x85, 0x14, 0x66, 0xF7, 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C,
- 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3, 0xB4, 0x25,
- 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD,
- 0x2C, 0x5E, 0xCF
-]
-def calc_crc(msg):
- fcs = 0xff
- for c in msg:
- fcs = crc_table[fcs ^ ord(c)]
- return 0xff - fcs
-
-def format_frame(s):
- return ''.join(['%02X' % ord(c) for c in s])
-
-def send_frame(file, channel, data, type):
- msg = chr(0xf9) * 2
- print 'sending "%s"' % format_frame(msg)
- print file.write(msg)
- # Then we create the address field
- address = EA | CR | (channel & 63) << 2
- # The type field
- msg = chr(address) + chr(type)
- # CRC
- crc = chr(calc_crc(msg))
- msg = '\x7e' + msg + crc + '\x7e'
- print 'sending "%s"' % format_frame(msg)
- print file.write(msg)
-
-def chat(file, command):
- print "sending : %s" % command
- file.write('%s\n\r' % command)
- file.flush()
+def chat(modem, command):
+ """Send a command to the modem and wait for a reply
+ """
+ logger.debug("sending : %s", command)
+ modem.write('%s\r' % command)
+ modem.flush()
ret = ''
while True:
- c = file.read(1)
+ c = modem.read(1)
if not c:
break
ret += c
if ret.endswith('\r\nOK\r\n'):
break
- print "got reply : %s" % repr(ret)
+ logger.debug("got reply : %s", repr(ret))
return ret
-# Where do those sleep times come from ? Shouldn't this be done in the
-# kernel anyway ? It there a way to make modem initialization hardware
-# independant ?
-print "turn modem off"
-open('/sys/devices/platform/neo1973-pm-gsm.0/power_on', 'w').write('0')
-time.sleep(1)
-print "turn modem on"
-open('/sys/devices/platform/neo1973-pm-gsm.0/power_on', 'w').write('1')
-time.sleep(1)
-print "reset modem"
-open('/sys/devices/platform/neo1973-pm-gsm.0/reset', 'w').write('1')
-time.sleep(1)
-open('/sys/devices/platform/neo1973-pm-gsm.0/reset', 'w').write('0')
-time.sleep(4)
-# Connect to the serial port
-import serial
-modem = serial.Serial('/dev/ttySAC0', 115200, rtscts=1, timeout=1)
-print "waiting for ready msg"
-# The modem should send something after it is initialized...
-rep = modem.read(256)
-if not rep:
- print "Error no msg"
- sys.exit(-1)
-print repr(rep)
+def reset_calypso():
+ """Initialize the modem before we can start sending AT commands
-# We wake the modem up (?) Do we always have to do this ?
-chat(modem, 'AT')
+ This part of the code is specific to TI calypso modem. Maybe we
+ should modify the kernel so that we don't have to do that in user
+ space.
+ """
+ logger.debug("turn modem off")
+ open('/sys/devices/platform/neo1973-pm-gsm.0/power_on', 'w').write('0')
+ time.sleep(1)
+ logger.debug("turn modem on")
+ open('/sys/devices/platform/neo1973-pm-gsm.0/power_on', 'w').write('1')
+ time.sleep(1)
+ logger.debug("reset modem")
+ open('/sys/devices/platform/neo1973-pm-gsm.0/reset', 'w').write('1')
+ time.sleep(1)
+ open('/sys/devices/platform/neo1973-pm-gsm.0/reset', 'w').write('0')
+ time.sleep(4)
-chat(modem, 'ATZ') # reset
-chat(modem, 'ATE0') # echo off
-chat(modem, 'AT+CGMR') # get the firmware version
-ret = chat(modem, 'AT+CLAC') # get the list of AT commands
-print
-print ret
+def basic_tests(modem):
+ """Perform some basic tests that don't need a SIM card"""
+ # TODO: check the return values
+ chat(modem, 'AT+CMUX?') # Multiplexing mode (error on calypso)
+ chat(modem, 'AT+CGMM') # Model id
+ chat(modem, 'AT+CGMR') # Firmware version
+ chat(modem, 'AT+CGMI') # Manufacturer id
+ chat(modem, 'AT+IPR?') # Bit rate
+ chat(modem, 'AT+ICF?') # Character framing
+ chat(modem, 'ATS3?') # Command line term
+ chat(modem, 'ATS4?') # Response formating
+ chat(modem, 'ATS5?') # Command line editing char
+ chat(modem, 'AT+ICF?') # TE-TA char framing
+ chat(modem, 'AT+IFC?') # Flow control (calypso != MC75i)
+ chat(modem, 'AT+CSCS?') # Character set
+ chat(modem, 'AT+CFUN?') # Phone functionalities
+ chat(modem, 'AT+CLAC') # List of AT commands
+ chat(modem, 'AT+CSQ') # Signal quality
+
+def basic_sim_test(modem):
+ """Some basic tests with the SIM, but not using the GSM network.
+ """
+ chat(modem, 'AT+CIMI') # IMSI
+ chat(modem, 'AT+CPIN?') # SIM status (e.g 'READY', 'SIM PIN')
+ chat(modem, 'AT+CPBS?') # Phonebook memory storage
+ chat(modem, 'AT+CPBS="SM"')
+ chat(modem, 'AT+CPBR=?') # Phonebook entries range. May return
+ # error on calypso if phonebook is
+ # empty
+ # chat(modem, 'AT+CPBW=1,"01234",129,"hello"')
+
+
+def gsm_network_tests(modem):
+ """Some basic GSM network tests
+
+ We need to be allowed to register to a provider.
+ """
+ chat(modem, 'AT+CFUN=1') # Turn antenna on
+ chat(modem, 'AT+COPS=?') # Find all providers
+ # On the calypso it returns nothing...
+ # TODO: check that at least one provider is available
+ chat(modem, 'AT+COPS=0') # Register
+ # On the MC75i is returns OK and then try to register
+ chat(modem, 'AT+COPS?') # See provider
+
+
+USAGE = "test.py [device]"
+
+if __name__ == '__main__':
+ # The first parameter is the name of the device
+ if len(sys.argv) == 2:
+ device = sys.argv[1]
+ elif len(sys.argv) == 1:
+ device = '/dev/ttySAC0'
+ else:
+ print USAGE
+ sys.exit(-1)
+
+ logging.basicConfig(level=logging.DEBUG,
+ format='%(name)-8s %(levelname)-8s %(message)s')
+
+ logger.info("using device %s", device)
+
+# reset_calypso()
+
+ modem = serial.Serial(device, 115200, rtscts=1, timeout=5)
+ logger.debug("waiting for ready msg")
+ # The modem should send something after it is initialized...
+ rep = modem.read(256)
+ if not rep:
+ logger.error("Error no msg")
+ # sys.exit(-1)
+ logger.debug("Ready message: %s", repr(rep))
+
+ # We start by a AT command to wake up the modem
+ # (Probably only needed by TI Calypso)
+ chat(modem, 'AT')
+ chat(modem, 'ATE0') # echo off
+ chat(modem, 'ATZ') # reset
+ chat(modem, 'AT+CMEE=2') # verbose error
+
+
+ # Perform some basic tests
+ basic_tests(modem)
+ basic_sim_test(modem)
+ gsm_network_tests(modem)
+
+ # turn off the modem
+ # XXX: only work with Siemens MC75i
+ # chat(modem, 'AT^SMSO')
--- End Message ---
--- Begin Message ---
Author: charlie
Date: 2008-11-10 12:05:59 +0100 (Mon, 10 Nov 2008)
New Revision: 4777
Added:
developers/charlie/Wiki/strace
Modified:
developers/charlie/Wiki/ATCommands
developers/charlie/Wiki/Calypso
developers/charlie/Wiki/DSB75
developers/charlie/Wiki/MC75i
developers/charlie/Wiki/Todo
developers/charlie/Wiki/emacs
developers/charlie/Wiki/git
Log:
Update personal wiki
Modified: developers/charlie/Wiki/ATCommands
===================================================================
--- developers/charlie/Wiki/ATCommands 2008-11-10 10:59:31 UTC (rev 4776)
+++ developers/charlie/Wiki/ATCommands 2008-11-10 11:05:59 UTC (rev 4777)
@@ -1,19 +1,57 @@
* ATCommands
- ATZ : start the modem
-- AT+IPR? : Get the bit rate of the UART
+
- ATE1 : turn echo on
- ATE0 : turn echo off
- AT+CPIN : Set SIM code
- AT+CFUN=1 : turn antenna on
-- AT+CGMI : get manufacturer id
+- AT+CMEE=1 : Show error (if 2 show text errors !)
- AT+CMUX : activate multiplexer mode
+
+- AT+IPR? : Get the bit rate of the UART
- AT+CGMR : Get firmeware version
+- AT+CGMI : get manufacturer id
+
+- AT+CGMM : get model id. 'MC75i' for the [[MC75i]] and 'Neo1973 GTA02
+ Embedded GSM Modem' for [[Calypso]])
+
- AT+CLAC : Get list of AT commands
+
- AT^SMSO : Turn off module (will also disconnect from network)
+ Only works with MC75i.
+- AT+CPAS : request ME activity status (0=ready)
+
+* Interface commands
+
+- ATS3=<value> : command line termination character (mandatory to 13)
+- ATS4=<value> : response formating (recommanded 10)
+- ATS5=<value> : command line editing char (recommanded 8)
+- ATE<value> : command echo (recommanded 0 i.e. echoes command back)
+- ATQ<value> : result code supr (recommanded 0 i.e. transmits results)
+- ATV<value> : response format (recommanded 1 i.e. return '\r\nOK\r\n'
+ after each call
+- AT+ICF=<format>,[<parity>] : TE-TA char framing (recommended 3,3
+ i.e. 8 data bits, no parity, 1 stop
+ bit)
+
+* SIM commands
+
+- AT+CPIN? : get pin status (could be READY, SIM PIN, SIM PUK, etc.)
+- AT+CPBS : set phonebook memory storage
+- AT+CPBR=i,[j] : get the phonebook entry from i to j (if j not
+ defined get only i)
+- AT+CPBR=? : get the range of phonebook entries
+- AT+CBBW=index, number, type, text : Add a new phonebook entry
+
+* Network commands
+
+- AT+COPS=? : get list of available operators
+- AT+COPS=0,0 : find a network and register on it (may take some time)
+
* Unsolicited
- AT+CMT : Incoming SMS
Modified: developers/charlie/Wiki/Calypso
===================================================================
--- developers/charlie/Wiki/Calypso 2008-11-10 10:59:31 UTC (rev 4776)
+++ developers/charlie/Wiki/Calypso 2008-11-10 11:05:59 UTC (rev 4777)
@@ -3,255 +3,36 @@
** list of AT commands (got using AT+CLAC)
-AT+CACM
-AT+CAMM
-AT+CAOC
-AT+CBC
-AT+CBST
-AT+CCFC
-AT+CCUG
-AT+CCWA
-AT+CCWE
-AT+CEER
-AT+CFUN
-AT+CGACT
-AT+CGANS
-AT+CGATT
-AT+CGAUTO
-AT+CGCLASS
-AT+CGDATA
-AT+CGDCONT
-AT+CGEREP
-AT+CGMI
-AT+CGMM
-AT+CGMR
-AT+CGPADDR
-AT+CGQMIN
-AT+CGQREQ
-AT+CGREG
-AT+CGSMS
-AT+CGSN
-AT+CHLD
-AT+CHUP
-AT+CIMI
-AT+CLAC
-AT+CLAE
-AT+CLAN
-AT+CLCC
-AT+CLCK
-AT+CLIP
-AT+CDIP
-AT+CLIR
-AT+CLVL
-AT+CMEE
-AT+CMGC
-AT+CMGD
-AT+CMGF
-AT+CMGL
-AT+CMGR
-AT+CMGS
-AT+CMGW
-AT+CMOD
-AT+CMSS
-AT+CMMS
-AT+CMUT
-AT+CMUX
-AT+CNMA
-AT+CNMI
-AT+CNUM
-AT+COLP
-AT+COPN
-AT+COPS
-AT+CPAS
-AT+CPBF
-AT+CPBR
-AT+CPBS
-AT+CPBW
-AT+CPIN
-AT+CPMS
-AT+CPOL
-AT+CPUC
-AT+CPWD
-AT+CR
-AT+CRC
-AT+CREG
-AT+CRES
-AT+CRLP
-AT+CRSL
-AT+CRSM
-AT+CSAS
-AT+CSCA
-AT+CSCB
-AT+CSCS
-AT+CSDH
-AT+CSIM
-AT+CSMP
-AT+CSMS
-AT+CSNS
-AT+CSQ
-AT%CSQ
-AT+CSSN
-AT+CSTA
-AT+CSVM
-AT+CTFR
-AT+CUSD
-AT+DR
-AT+FAP
-AT+FBO
-AT+FBS
-AT+FBU
-AT+FCC
-AT+FCLASS
-AT+FCQ
-AT+FCR
-AT+FCS
-AT+FCT
-AT+FDR
-AT+FDT
-AT+FEA
-AT+FFC
-AT+FHS
-AT+FIE
-AT+FIP
-AT+FIS
-AT+FIT
-AT+FKS
-AT+FLI
-AT+FLO
-AT+FLP
-AT+FMI
-AT+FMM
-AT+FMR
-AT+FMS
-AT+FND
-AT+FNR
-AT+FNS
-AT+FPA
-AT+FPI
-AT+FPS
-AT+FPW
-AT+FRQ
-AT+FSA
-AT+FSP
-AT+GCAP
-AT+GCI
-AT+GMI
-AT+GMM
-AT+GMR
-AT+GSN
-AT+ICF
-AT+IFC
-AT+ILRR
-AT+IPR
-AT+VTS
-AT+WS46
-AT%ALS
-AT%ATR
-AT%BAND
-AT%CACM
-AT%CAOC
-AT%CCBS
-AT%STDR
-AT%CGAATT
-AT%CGMM
-AT%CGREG
-AT%CNAP
-AT%CPI
-AT%COLR
-AT%CPRIM
-AT%CTV
-AT%CUNS
-AT%NRG
-AT%SATC
-AT%SATE
-AT%SATR
-AT%SATT
-AT%SNCNT
-AT%VER
-AT%CGCLASS
-AT%CGPCO
-AT%CGPPP
-AT%EM
-AT%EMET
-AT%EMETS
-AT%CBHZ
-AT%CPHS
-AT%CPNUMS
-AT%CPALS
-AT%CPVWI
-AT%CPOPN
-AT%CPCFU
-AT%CPINF
-AT%CPMB
-AT%CPRI
-AT%DATA
-AT%DINF
-AT%CLCC
-AT%DBGINFO
-AT%VTS
-AT%CHPL
-AT%CREG
-AT+CTZR
-AT+CTZU
-AT%CTZV
-AT%CNIV
-AT%PVRF
-AT%CWUP
-AT%DAR
-AT+CIND
-AT+CMER
-AT%CSCN
-AT%RDL
-AT%RDLB
-AT%CSTAT
-AT%CPRSM
-AT%CHLD
-AT%SIMIND
-AT%SECP
-AT%SECS
-AT%CSSN
-AT+CCLK
-AT%CSSD
-AT%COPS
-AT%CPMBW
-AT%CUST
-AT%SATCC
-AT%COPN
-AT%CGEREP
-AT%CUSCFG
-AT%CUSDR
-AT%CPBS
-AT%PBCF
-AT%SIMEF
-AT%EFRSLT
-AT%CMGMDU
-AT%CMGL
-AT%CMGR
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
-ATA
-ATB
-AT&C
-ATD
-AT&D
-ATE
-ATF
-AT&F
-ATH
-ATI
-AT&K
-ATL
-ATM
-ATO
-ATP
-ATQ
-ATS
-ATT
-ATV
-ATW
-AT&W
-ATX
-ATZ
+AT+CACM, AT+CAMM, AT+CAOC, AT+CBC, AT+CBST, AT+CCFC, AT+CCUG, AT+CCWA,
+AT+CCWE, AT+CEER, AT+CFUN, AT+CGACT, AT+CGANS, AT+CGATT, AT+CGAUTO,
+AT+CGCLASS, AT+CGDATA, AT+CGDCONT, AT+CGEREP, AT+CGMI, AT+CGMM,
+AT+CGMR, AT+CGPADDR, AT+CGQMIN, AT+CGQREQ, AT+CGREG, AT+CGSMS,
+AT+CGSN, AT+CHLD, AT+CHUP, AT+CIMI, AT+CLAC, AT+CLAE, AT+CLAN,
+AT+CLCC, AT+CLCK, AT+CLIP, AT+CDIP, AT+CLIR, AT+CLVL, AT+CMEE,
+AT+CMGC, AT+CMGD, AT+CMGF, AT+CMGL, AT+CMGR, AT+CMGS, AT+CMGW,
+AT+CMOD, AT+CMSS, AT+CMMS, AT+CMUT, AT+CMUX, AT+CNMA, AT+CNMI,
+AT+CNUM, AT+COLP, AT+COPN, AT+COPS, AT+CPAS, AT+CPBF, AT+CPBR,
+AT+CPBS, AT+CPBW, AT+CPIN, AT+CPMS, AT+CPOL, AT+CPUC, AT+CPWD, AT+CR,
+AT+CRC, AT+CREG, AT+CRES, AT+CRLP, AT+CRSL, AT+CRSM, AT+CSAS, AT+CSCA,
+AT+CSCB, AT+CSCS, AT+CSDH, AT+CSIM, AT+CSMP, AT+CSMS, AT+CSNS, AT+CSQ,
+AT%CSQ, AT+CSSN, AT+CSTA, AT+CSVM, AT+CTFR, AT+CUSD, AT+DR, AT+FAP,
+AT+FBO, AT+FBS, AT+FBU, AT+FCC, AT+FCLASS, AT+FCQ, AT+FCR, AT+FCS,
+AT+FCT, AT+FDR, AT+FDT, AT+FEA, AT+FFC, AT+FHS, AT+FIE, AT+FIP,
+AT+FIS, AT+FIT, AT+FKS, AT+FLI, AT+FLO, AT+FLP, AT+FMI, AT+FMM,
+AT+FMR, AT+FMS, AT+FND, AT+FNR, AT+FNS, AT+FPA, AT+FPI, AT+FPS,
+AT+FPW, AT+FRQ, AT+FSA, AT+FSP, AT+GCAP, AT+GCI, AT+GMI, AT+GMM,
+AT+GMR, AT+GSN, AT+ICF, AT+IFC, AT+ILRR, AT+IPR, AT+VTS, AT+WS46,
+AT%ALS, AT%ATR, AT%BAND, AT%CACM, AT%CAOC, AT%CCBS, AT%STDR,
+AT%CGAATT, AT%CGMM, AT%CGREG, AT%CNAP, AT%CPI, AT%COLR, AT%CPRIM,
+AT%CTV, AT%CUNS, AT%NRG, AT%SATC, AT%SATE, AT%SATR, AT%SATT, AT%SNCNT,
+AT%VER, AT%CGCLASS, AT%CGPCO, AT%CGPPP, AT%EM, AT%EMET, AT%EMETS,
+AT%CBHZ, AT%CPHS, AT%CPNUMS, AT%CPALS, AT%CPVWI, AT%CPOPN, AT%CPCFU,
+AT%CPINF, AT%CPMB, AT%CPRI, AT%DATA, AT%DINF, AT%CLCC, AT%DBGINFO,
+AT%VTS, AT%CHPL, AT%CREG, AT+CTZR, AT+CTZU, AT%CTZV, AT%CNIV, AT%PVRF,
+AT%CWUP, AT%DAR, AT+CIND, AT+CMER, AT%CSCN, AT%RDL, AT%RDLB, AT%CSTAT,
+AT%CPRSM, AT%CHLD, AT%SIMIND, AT%SECP, AT%SECS, AT%CSSN, AT+CCLK,
+AT%CSSD, AT%COPS, AT%CPMBW, AT%CUST, AT%SATCC, AT%COPN, AT%CGEREP,
+AT%CUSCFG, AT%CUSDR, AT%CPBS, AT%PBCF, AT%SIMEF, AT%EFRSLT, AT%CMGMDU,
+AT%CMGL, AT%CMGR, [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED],
[EMAIL PROTECTED], [EMAIL PROTECTED], ATA, ATB,
+AT&C, ATD, AT&D, ATE, ATF, AT&F, ATH, ATI, AT&K, ATL, ATM, ATO, ATP,
+ATQ, ATS, ATT, ATV, ATW, AT&W, ATX, ATZ
Modified: developers/charlie/Wiki/DSB75
===================================================================
--- developers/charlie/Wiki/DSB75 2008-11-10 10:59:31 UTC (rev 4776)
+++ developers/charlie/Wiki/DSB75 2008-11-10 11:05:59 UTC (rev 4777)
@@ -13,7 +13,8 @@
The DSB75 supports 3V and 1.8V SIM cards.
-
-
* Usage
+Connect everything, then use [[minicom]] to connect to the device
+/dev/ttyUSB0 (I created a config called mc75i for that). Then type AT
+commands and see the results.
Modified: developers/charlie/Wiki/MC75i
===================================================================
--- developers/charlie/Wiki/MC75i 2008-11-10 10:59:31 UTC (rev 4776)
+++ developers/charlie/Wiki/MC75i 2008-11-10 11:05:59 UTC (rev 4777)
@@ -1,9 +1,10 @@
* MC75i
-This is the [[GSM]] modem for GTA03, produced by CINTERION
-contact for hardware info : James Chang <[EMAIL PROTECTED]>
-The MC75i is connected to the UART port of the CPU, we can access it through
/dev/ttySAC0
+This is the [[GSM]] modem for GTA03, produced by CINTERION contact for
+hardware info : James Chang <[EMAIL PROTECTED]> The MC75i is
+connected to the UART port of the CPU, we can access it through
+/dev/ttySAC0
Notes :
- Cinterion provides window multiplexer driver (WinMUX, see AT command doc)
@@ -11,4 +12,34 @@
* Testing it using the [[DSB75]] Testing board
-See [[DSB75]]
+ See [[DSB75]]
+
+* Differences with TI [[Calypso]] modem
+
+ - The MC75i seems to be always responsible, the Calypso needs to be
+ awaken after we don't communicate with it for a few seconds.
+
+ -
+
+
+* List of AT commands
+
+AT&F, AT&V, AT&W, AT+CACM AT+CALA, AT+CAMM, AT+CCFC, AT+CEER, AT+CFUN,
+AT+CGMM, AT+CGREG, AT+CGSN, AT+CIMI, AT+CIND, AT+CLCC, AT+CLCK_FD,
+AT+CLVL, AT+CMEE, AT+CMER, AT+CMGL, AT+CMUT, AT+CMUX, AT+CNMI,
+AT+CNUM, AT+COPN, AT+COPS, AT+CPBR, AT+CPBS, AT+CPBW, AT+CREG,
+AT+CRSM, AT+CSCB, AT+CSCS, AT+CSIM, AT+CTZR, AT+CTZU, AT+GMM, AT+GSN,
+AT+VTD, AT+VTS, AT+WS46, AT^MONI, AT^MONP, AT^SACM, AT^SAIC, AT^SALS,
+AT^SATR, AT^SBC, AT^SBLK, AT^SBNR, AT^SBNW, AT^SCCFC, AT^SCFG,
+AT^SCKS, AT^SCML, AT^SCTM, AT^SDLD, AT^SFDL, AT^SGAUTH, AT^SGSN,
+AT^SHOM, AT^SICC, AT^SICI, AT^SICO, AT^SICS, AT^SIND, AT^SISC,
+AT^SISE, AT^SISI, AT^SISO, AT^SISR, AT^SISS, AT^SISW, AT^SISX,
+AT^SLCC, AT^SLCD, AT^SM20, AT^SMGL, AT^SMGO, AT^SMONC, AT^SMOND,
+AT^SMONG, AT^SMSO, AT^SNBTA, AT^SNFA, AT^SNFD, AT^SNFG, AT^SNFI,
+AT^SNFM, AT^SNFO, AT^SNFPT, AT^SNFS, AT^SNFTTY, AT^SNFV, AT^SNFW,
+AT^SNWS, AT^SOPS, AT^SPBC, AT^SPBD, AT^SPBG, AT^SPBS, AT^SPBW,
+AT^SPLM, AT^SPLR, AT^SPLW, AT^SQWE, AT^SRPN, AT^SRSA, AT^SRSM,
+AT^SRTC, AT^SRTEH, AT^SRUN, AT^SSET, AT^SSPI, AT^SSTA, AT^SSTGI,
+AT^SSTK, AT^SSTR, AT^SSUH, AT^STBD, AT^STCD, AT^SXSM, AT_AND_F_DUMMY,
+AT_AND_F_DUMMY, AT_AND_F_DUMMY, AT_CGATT_DUMMY, ATI, ATZ
+
Modified: developers/charlie/Wiki/Todo
===================================================================
--- developers/charlie/Wiki/Todo 2008-11-10 10:59:31 UTC (rev 4776)
+++ developers/charlie/Wiki/Todo 2008-11-10 11:05:59 UTC (rev 4777)
@@ -1,14 +1,6 @@
-* TODO
+Charly's TODO
-- See how to refuse git commits that don't follow coding style
-- Write automatic GSM testing script --> in progress
- - Check connection
- - Check AT command list, compatible with framework (do we need to create a
new modem class in ogmsd ?)
- - How can i automatically get all the needed framework commands ?? (script
done)
-
-- Have a look at Chris production tests framework --> waiting for it to
be online
-- Check MC75i hardware spec, how does it fit into our kernel and production
test
-- Lear to use the DSB75 testing board
-- See how to handle SIM + PUK with AT commands --> I forgot my
PIN number !!!
-
-- BY PLANE TICKETS FOR XMASS !!!
+* Finish GSM Testing script
+* Fix WaitDBus call timeout problem in tichy
+* Finish GSM test script, make it works on GTA02
+* BY PLANE TICKETS FOR XMASS !!!
Modified: developers/charlie/Wiki/emacs
===================================================================
--- developers/charlie/Wiki/emacs 2008-11-10 10:59:31 UTC (rev 4776)
+++ developers/charlie/Wiki/emacs 2008-11-10 11:05:59 UTC (rev 4777)
@@ -6,6 +6,9 @@
M-x c-set-style
set the c style for indentation
+M-x transient-mark-mode
+ Set visible mark for selection (very useful)
+
M-x column-number-mode / line-number-mode
M-x buffer-mode
@@ -14,6 +17,9 @@
C-u 6 C-x {
resize window 6 time
+M-x whitespace-buffer
+ show trailing and ending spaces
+
* using etags :
M-. : go to def
M-* : return from def
@@ -22,7 +28,6 @@
* Text mode
M-q : auto justify paragraph
-
* python mode
M-; : add comment at the end of a line (but it uses tab :( )
@@ -30,3 +35,8 @@
To NOT use tabs :
set-variable indent-tabs-mode nil
+
+* AUtospelling
+
+M-x flyspell-mode
+M-x flyspell-prog-mode
Modified: developers/charlie/Wiki/git
===================================================================
--- developers/charlie/Wiki/git 2008-11-10 10:59:31 UTC (rev 4776)
+++ developers/charlie/Wiki/git 2008-11-10 11:05:59 UTC (rev 4777)
@@ -14,11 +14,17 @@
git stach
git stach apply
-git reset --hard
+git reset --hard (revert all localk change since last commit !)
-*** search commands
+** search commands
gitk : user interface to see the commits
git log
git grep
git blame <file> : see who did what on a file (very useful)
git show <commit>
+
+** Commit commands
+git add --patch : Add only a part of a file into the next commit
+git diff origin --check : check for whitespace in local commits
+git rebase -i origin : edit all local commits
+cat xxx.patch | git am : apply a patch
Added: developers/charlie/Wiki/strace
===================================================================
--- developers/charlie/Wiki/strace (rev 0)
+++ developers/charlie/Wiki/strace 2008-11-10 11:05:59 UTC (rev 4777)
@@ -0,0 +1,7 @@
+* strace
+
+To connect to a process pid:
+ strace -p PID
+
+To trace only open,close,read/write operation:
+ -e trace=open,close,read,write
--- End Message ---
