Send commitlog mailing list submissions to
commitlog@lists.openmoko.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/commitlog
or, via email, send a message with subject or body 'help' to
commitlog-requ...@lists.openmoko.org
You can reach the person managing the list at
commitlog-ow...@lists.openmoko.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of commitlog digest..."
Today's Topics:
1. r5619 - in trunk/gta02-core: . components
(da...@docs.openmoko.org)
2. r5620 - trunk/eda/fped (wer...@docs.openmoko.org)
3. r5621 - trunk/gta02-core/modules (re...@docs.openmoko.org)
4. r5622 - trunk/gta02-core/modules (re...@docs.openmoko.org)
5. r5623 - trunk/gta02-core/modules (re...@docs.openmoko.org)
6. development tree for U-Boot: Changes to 'stable'
(g...@git.openmoko.org)
--- Begin Message ---
Author: daveb
Date: 2009-09-08 21:35:59 +0200 (Tue, 08 Sep 2009)
New Revision: 5619
Modified:
trunk/gta02-core/components/gta02-core-comp.pro
trunk/gta02-core/modem.sch
trunk/gta02-core/pmu.sch
Log:
- annotation for gsm antenna
- MODEM_ON and MODEM_RST are both inverted signals.
Modified: trunk/gta02-core/components/gta02-core-comp.pro
===================================================================
--- trunk/gta02-core/components/gta02-core-comp.pro 2009-09-08 19:24:56 UTC
(rev 5618)
+++ trunk/gta02-core/components/gta02-core-comp.pro 2009-09-08 19:35:59 UTC
(rev 5619)
@@ -153,4 +153,4 @@
LibName46=./bf2520.lib
LibName47=./antenna
LibName48=./wm3236aq.lib
-LibName49=gsm_antenna
+LibName49=./gsm_antenna
Modified: trunk/gta02-core/modem.sch
===================================================================
--- trunk/gta02-core/modem.sch 2009-09-08 19:24:56 UTC (rev 5618)
+++ trunk/gta02-core/modem.sch 2009-09-08 19:35:59 UTC (rev 5619)
@@ -1,5 +1,5 @@
-EESchema Schematic File Version 2 date Tue 08 Sep 2009 20:17:30 BST
-LIBS:power,device,conn,gta02-core
+EESchema Schematic File Version 2 date Tue 08 Sep 2009 20:34:50 BST
+LIBS:power,device,conn,gta02-core,gta02-core-cache
EELAYER 24 0
EELAYER END
$Descr A3 16535 11700
@@ -320,28 +320,28 @@
Text Notes 2450 4950 0 50 ~ 0
RF trace - characteristic impedance is 50ohm
$Comp
-L GSM_ANTENNA ANT?
+L GSM_ANTENNA ANT8101
U 1 1 4AA6AAA3
P 2050 4450
-F 0 "ANT?" H 1700 4350 60 0000 C CNN
+F 0 "ANT8101" H 1700 4350 60 0000 C CNN
F 1 "GSM_ANTENNA" H 1700 4450 60 0000 C CNN
1 2050 4450
1 0 0 -1
$EndComp
$Comp
-L PWR_FLAG #FLG?
+L PWR_FLAG #FLG025
U 1 1 4AA27062
P 4850 4000
-F 0 "#FLG?" H 4850 4270 30 0001 C CNN
+F 0 "#FLG025" H 4850 4270 30 0001 C CNN
F 1 "PWR_FLAG" H 4850 4230 30 0000 C CNN
1 4850 4000
1 0 0 -1
$EndComp
$Comp
-L PWR_FLAG #FLG?
+L PWR_FLAG #FLG026
U 1 1 4AA27055
P 13250 5150
-F 0 "#FLG?" H 13250 5420 30 0001 C CNN
+F 0 "#FLG026" H 13250 5420 30 0001 C CNN
F 1 "PWR_FLAG" H 13250 5380 30 0000 C CNN
1 13250 5150
0 1 1 0
@@ -487,10 +487,10 @@
Text GLabel 8300 7150 2 60 Output ~ 0
MODEM_INT
$Comp
-L GND #PWR7
+L GND #PWR027
U 1 1 4A99855C
P 8900 5350
-F 0 "#PWR7" H 8900 5350 30 0001 C CNN
+F 0 "#PWR027" H 8900 5350 30 0001 C CNN
F 1 "GND" H 8900 5280 30 0001 C CNN
1 8900 5350
1 0 0 -1
@@ -534,19 +534,19 @@
1 0 0 -1
$EndComp
$Comp
-L GSM_2V8 #PWR16
+L GSM_2V8 #PWR028
U 1 1 4A997BF4
P 13150 7350
-F 0 "#PWR16" H 13150 7250 50 0001 C CNN
+F 0 "#PWR028" H 13150 7250 50 0001 C CNN
F 1 "GSM_2V8" H 13150 7500 50 0000 C CNN
1 13150 7350
1 0 0 -1
$EndComp
$Comp
-L IO_3V3 #PWR14
+L IO_3V3 #PWR029
U 1 1 4A997BBB
P 12900 4250
-F 0 "#PWR14" H 12900 4150 50 0001 C CNN
+F 0 "#PWR029" H 12900 4150 50 0001 C CNN
F 1 "IO_3V3" H 12900 4400 50 0000 C CNN
1 12900 4250
1 0 0 -1
@@ -581,10 +581,10 @@
Text GLabel 13350 6850 2 60 Input ~ 0
MODEM_SERVICE
$Comp
-L GSM_2V8 #PWR8
+L GSM_2V8 #PWR030
U 1 1 4A995566
P 10150 5150
-F 0 "#PWR8" H 10150 5050 50 0001 C CNN
+F 0 "#PWR030" H 10150 5050 50 0001 C CNN
F 1 "GSM_2V8" H 10150 5300 50 0000 C CNN
1 10150 5150
1 0 0 -1
@@ -612,10 +612,10 @@
Text GLabel 8300 6350 2 60 Output ~ 0
MODEM_TX
$Comp
-L VB_GSM #PWR4
+L VB_GSM #PWR031
U 1 1 4A994FBA
P 5650 3200
-F 0 "#PWR4" H 5650 3100 50 0001 C CNN
+F 0 "#PWR031" H 5650 3100 50 0001 C CNN
F 1 "VB_GSM" H 5650 3350 50 0000 C CNN
1 5650 3200
1 0 0 -1
@@ -630,28 +630,28 @@
1 0 0 -1
$EndComp
$Comp
-L GSM_2V8 #PWR9
+L GSM_2V8 #PWR032
U 1 1 4A994EF5
P 11350 4750
-F 0 "#PWR9" H 11350 4650 50 0001 C CNN
+F 0 "#PWR032" H 11350 4650 50 0001 C CNN
F 1 "GSM_2V8" H 11350 4900 50 0000 C CNN
1 11350 4750
1 0 0 -1
$EndComp
$Comp
-L IO_2V8 #PWR11
+L IO_2V8 #PWR033
U 1 1 4A994EDF
P 11500 2100
-F 0 "#PWR11" H 11500 2000 50 0001 C CNN
+F 0 "#PWR033" H 11500 2000 50 0001 C CNN
F 1 "IO_2V8" H 11500 2250 50 0000 C CNN
1 11500 2100
1 0 0 -1
$EndComp
$Comp
-L GSM_2V8 #PWR13
+L GSM_2V8 #PWR034
U 1 1 4A994ED4
P 12600 2100
-F 0 "#PWR13" H 12600 2000 50 0001 C CNN
+F 0 "#PWR034" H 12600 2000 50 0001 C CNN
F 1 "GSM_2V8" H 12600 2250 50 0000 C CNN
1 12600 2100
1 0 0 -1
@@ -668,10 +668,10 @@
Text GLabel 8300 5950 2 60 Output ~ 0
MODEM_MON
$Comp
-L GND #PWR3
+L GND #PWR035
U 1 1 4A9944AC
P 5400 9150
-F 0 "#PWR3" H 5400 9150 30 0001 C CNN
+F 0 "#PWR035" H 5400 9150 30 0001 C CNN
F 1 "GND" H 5400 9080 30 0001 C CNN
1 5400 9150
1 0 0 -1
@@ -680,10 +680,10 @@
NoConn ~ 4700 8050
NoConn ~ 4700 7950
$Comp
-L GND #PWR1
+L GND #PWR036
U 1 1 4A994302
P 4850 4900
-F 0 "#PWR1" H 4850 4900 30 0001 C CNN
+F 0 "#PWR036" H 4850 4900 30 0001 C CNN
F 1 "GND" H 4850 4830 30 0001 C CNN
1 4850 4900
1 0 0 -1
@@ -698,10 +698,10 @@
1 0 0 -1
$EndComp
$Comp
-L GND #PWR2
+L GND #PWR037
U 1 1 4A9942ED
P 5250 4900
-F 0 "#PWR2" H 5250 4900 30 0001 C CNN
+F 0 "#PWR037" H 5250 4900 30 0001 C CNN
F 1 "GND" H 5250 4830 30 0001 C CNN
1 5250 4900
1 0 0 -1
@@ -716,28 +716,28 @@
1 0 0 -1
$EndComp
$Comp
-L GND #PWR10
+L GND #PWR038
U 1 1 4A99424B
P 11350 7250
-F 0 "#PWR10" H 11350 7250 30 0001 C CNN
+F 0 "#PWR038" H 11350 7250 30 0001 C CNN
F 1 "GND" H 11350 7180 30 0001 C CNN
1 11350 7250
1 0 0 -1
$EndComp
$Comp
-L GND #PWR12
+L GND #PWR039
U 1 1 4A994248
P 11550 5750
-F 0 "#PWR12" H 11550 5750 30 0001 C CNN
+F 0 "#PWR039" H 11550 5750 30 0001 C CNN
F 1 "GND" H 11550 5680 30 0001 C CNN
1 11550 5750
1 0 0 -1
$EndComp
$Comp
-L GND #PWR15
+L GND #PWR040
U 1 1 4A994244
P 13100 5950
-F 0 "#PWR15" H 13100 5950 30 0001 C CNN
+F 0 "#PWR040" H 13100 5950 30 0001 C CNN
F 1 "GND" H 13100 5880 30 0001 C CNN
1 13100 5950
1 0 0 -1
@@ -773,9 +773,9 @@
Text GLabel 4100 6250 0 60 Output ~ 0
EARP
Text GLabel 7700 4750 2 60 Input ~ 0
-MODEM_ON
+MODEM_nON
Text GLabel 7700 4450 2 60 Input ~ 0
-MODEM_RST
+MODEM_nRST
Text GLabel 4100 6850 0 60 Output ~ 0
SIM_CLK
Text GLabel 4100 7000 0 60 Output ~ 0
Modified: trunk/gta02-core/pmu.sch
===================================================================
--- trunk/gta02-core/pmu.sch 2009-09-08 19:24:56 UTC (rev 5618)
+++ trunk/gta02-core/pmu.sch 2009-09-08 19:35:59 UTC (rev 5619)
@@ -1,5 +1,5 @@
-EESchema Schematic File Version 2 date Tue 08 Sep 2009 20:17:30 BST
-LIBS:power,device,conn,gta02-core
+EESchema Schematic File Version 2 date Tue 08 Sep 2009 20:31:55 BST
+LIBS:power,device,conn,gta02-core,gta02-core-cache
EELAYER 24 0
EELAYER END
$Descr A3 16535 11700
@@ -642,7 +642,7 @@
Wire Wire Line
4800 7600 7550 7600
Text GLabel 4600 7650 0 60 Output ~ 0
-MODEM_RST
+MODEM_nRST
Text Notes 8000 2250 0 50 ~ 0
GSM power switch removed - ecn0030
Text Notes 11850 800 0 60 ~ 0
@@ -870,7 +870,7 @@
0 -1 -1 0
$EndComp
Text GLabel 4600 7800 0 60 Output ~ 0
-MODEM_ON
+MODEM_nON
Text GLabel 4950 8000 0 60 Input ~ 0
PWREN
Text GLabel 4600 7500 0 60 Output ~ 0
--- End Message ---
--- Begin Message ---
Author: werner
Date: 2009-09-08 21:37:47 +0200 (Tue, 08 Sep 2009)
New Revision: 5620
Modified:
trunk/eda/fped/postscript.c
Log:
- postscript.c: don't try to print empty pad names, or we'll have a hard time
scaling that zero-sized box to fill the available space
Modified: trunk/eda/fped/postscript.c
===================================================================
--- trunk/eda/fped/postscript.c 2009-09-08 19:35:59 UTC (rev 5619)
+++ trunk/eda/fped/postscript.c 2009-09-08 19:37:47 UTC (rev 5620)
@@ -169,6 +169,8 @@
struct coord b = inst->u.pad.other;
unit_type h, w;
+ if (!*inst->u.pad.name)
+ return;
h = a.y-b.y;
w = a.x-b.x;
if (h < 0)
--- End Message ---
--- Begin Message ---
Author: rehar
Date: 2009-09-09 00:28:10 +0200 (Wed, 09 Sep 2009)
New Revision: 5621
Added:
trunk/gta02-core/modules/lis302dl.fpd
Modified:
trunk/gta02-core/modules/INFO
trunk/gta02-core/modules/STATUS
trunk/gta02-core/modules/mkloe
Log:
added LIS302D LGA14 footprint
Modified: trunk/gta02-core/modules/INFO
===================================================================
--- trunk/gta02-core/modules/INFO 2009-09-08 19:37:47 UTC (rev 5620)
+++ trunk/gta02-core/modules/INFO 2009-09-08 22:28:10 UTC (rev 5621)
@@ -48,4 +48,9 @@
#WM8753FL
F: wm8753fl
D: http://wolfsonmicro.com/uploads/documents/en/WAN0118.pdf
-#D: http://focus.ti.com/lit/an/slua271a/slua271a.pdf
\ No newline at end of file
+#D: http://focus.ti.com/lit/an/slua271a/slua271a.pdf
+
+#LIS302DL
+F: lis302dl
+D: http://www.st.com/stonline/products/literature/tn/12707.pdf
+#D: http://www.st.com/stonline/products/literature/ds/12726.pdf
\ No newline at end of file
Modified: trunk/gta02-core/modules/STATUS
===================================================================
--- trunk/gta02-core/modules/STATUS 2009-09-08 19:37:47 UTC (rev 5620)
+++ trunk/gta02-core/modules/STATUS 2009-09-08 22:28:10 UTC (rev 5621)
@@ -7,3 +7,4 @@
tst Werner
wm3236aq Werner EXPERIMENTAL - DO NOT USE YET
wm8753FL Rene DRAFT
+lis302dl Rene DRAFT
Added: trunk/gta02-core/modules/lis302dl.fpd
===================================================================
--- trunk/gta02-core/modules/lis302dl.fpd (rev 0)
+++ trunk/gta02-core/modules/lis302dl.fpd 2009-09-08 22:28:10 UTC (rev
5621)
@@ -0,0 +1,97 @@
+/*LIS302DL LGA14*/
+
+
+frame pad_u {
+ set name = i
+ ur: vec @(w/2,0mm)
+ ll: vec @(-w/2,-l)
+ pad "$name" ur ll
+
+}
+
+frame pad_b {
+ set name = i
+ ur: vec @(w/2,0mm)
+ ll: vec @(-w/2,l)
+ pad "$name" ur ll
+
+}
+frame pads_u {
+ loop i=1,6
+ pos: vec @(L1/2-(i-1)*p,D1/2-s1)
+ frame pad_u pos
+
+}
+frame pads_b {
+ loop i=8,13
+ pos: vec @(-L1/2+(i-8)*p,-D1/2+s1)
+ frame pad_b pos
+
+}
+
+frame pads_s {
+
+ ur14: vec @(E1/2-s1,w/2)
+ ll14: vec .(-l,-w)
+ pad "14" ur14 ll14
+ ur7: vec @(-E1/2+s1,-w/2)
+ ll7: vec .(l,w)
+ pad "7" ur7 ll7
+
+}
+frame outline{
+ ur: vec @(E1/2,D1/2)
+ ll: vec @(-E1/2,-D1/2)
+ c: vec @(E1/2-N,D1/2-N1)
+ dia: vec .(d/2,0mm)
+ rect ur ll silk
+ circ c dia silk
+
+}
+
+package "LIS302DL"
+
+/*design according to LIS302DL datasheet and design guidelines (see INFO)*/
+
+/*pitch*/
+set p=0.8mm
+
+/* max. pin width*/
+set T2=0.55mm
+
+/* max pin length*/
+set T1=0.85mm
+
+/*gap between pin and outline*/
+
+set s=0.1mm
+
+/*outline dimensions*/
+set E1=5mm
+set D1=3mm
+set N=1.36mm
+set N1=1.2mm
+set d=0.3mm
+set L1=4mm
+
+/*land length and width */
+set w = T2+0.1mm
+set l = T1+0.1mm
+set s1= s - 0.1mm/2
+set silk=0.1mm
+
+
+
+frame outline @
+frame pads_u @
+frame pads_b @
+frame pads_s @
+measx "E1=" outline.ll -> outline.ur -2mm
+measy "D1=" outline.ur -> outline.ll 2mm
+measx "N=" outline.c -> outline.ur N1+1mm
+measy "N1=" outline.ur -> outline.c N
+measx pads_b.pos -> pads_b.pos -s1-0.5mm
+measx "L1=" pads_b.pos >> pads_b.pos -s1-1mm
+measx "w=" pad_u.ll -> pad_u.ur l+s1+1mm
+measy "l=" pad_b.ur -> pad_b.ll (E1-L1)/2+w/2+1mm
+measy pad_b.ll -> pad_u.ll (E1-L1)/2-w/2+1mm
\ No newline at end of file
Modified: trunk/gta02-core/modules/mkloe
===================================================================
--- trunk/gta02-core/modules/mkloe 2009-09-08 19:37:47 UTC (rev 5620)
+++ trunk/gta02-core/modules/mkloe 2009-09-08 22:28:10 UTC (rev 5621)
@@ -1,7 +1,7 @@
#!/bin/bash
# Make a Library of Everything
-MODS="332fbga-p05 bga96-8x12-0mm8 ge865 stdpass tst wm3236aq wm8753fl"
+MODS="332fbga-p05 bga96-8x12-0mm8 ge865 stdpass tst wm3236aq wm8753fl lis302dl"
LIB=gta02-core.mod
--- End Message ---
--- Begin Message ---
Author: rehar
Date: 2009-09-09 02:17:03 +0200 (Wed, 09 Sep 2009)
New Revision: 5622
Modified:
trunk/gta02-core/modules/lis302dl.fpd
Log:
lis302dl.fpd
- clean-up & comments
- changed pin size
- changed 1.pin marker
- added solder land to outline distance calculation
Modified: trunk/gta02-core/modules/lis302dl.fpd
===================================================================
--- trunk/gta02-core/modules/lis302dl.fpd 2009-09-08 22:28:10 UTC (rev
5621)
+++ trunk/gta02-core/modules/lis302dl.fpd 2009-09-09 00:17:03 UTC (rev
5622)
@@ -1,6 +1,9 @@
/*LIS302DL LGA14*/
+/*
+Note: extended solder mask openings not yet defined.
+However this is strongly recommended by ST.
+*/
-
frame pad_u {
set name = i
ur: vec @(w/2,0mm)
@@ -43,9 +46,12 @@
ur: vec @(E1/2,D1/2)
ll: vec @(-E1/2,-D1/2)
c: vec @(E1/2-N,D1/2-N1)
- dia: vec .(d/2,0mm)
+ cll: vec c(-d/2,-d/2)
+ dia: vec c((d-silk)/2,0mm)
+ dia2: vec cll(d,d)
rect ur ll silk
circ c dia silk
+/* rpad "" cll dia2 */
}
@@ -56,28 +62,35 @@
/*pitch*/
set p=0.8mm
-/* max. pin width*/
-set T2=0.55mm
+/* pin width*/
+set T2=0.5mm
-/* max pin length*/
-set T1=0.85mm
+/* pin length*/
+set T1=0.8mm
+set L1=4mm
+
/*gap between pin and outline*/
-
set s=0.1mm
/*outline dimensions*/
set E1=5mm
set D1=3mm
+
+/*pin1 marker location/diameter*/
set N=1.36mm
set N1=1.2mm
set d=0.3mm
-set L1=4mm
-/*land length and width */
+
+/*solder land length and width */
set w = T2+0.1mm
set l = T1+0.1mm
-set s1= s - 0.1mm/2
+
+/*solder land distance to chip outline */
+set s1= s - (l-T1)/2
+
+/*silk screen width*/
set silk=0.1mm
@@ -86,6 +99,7 @@
frame pads_u @
frame pads_b @
frame pads_s @
+
measx "E1=" outline.ll -> outline.ur -2mm
measy "D1=" outline.ur -> outline.ll 2mm
measx "N=" outline.c -> outline.ur N1+1mm
@@ -94,4 +108,4 @@
measx "L1=" pads_b.pos >> pads_b.pos -s1-1mm
measx "w=" pad_u.ll -> pad_u.ur l+s1+1mm
measy "l=" pad_b.ur -> pad_b.ll (E1-L1)/2+w/2+1mm
-measy pad_b.ll -> pad_u.ll (E1-L1)/2-w/2+1mm
\ No newline at end of file
+measy pad_b.ll -> pad_u.ll (E1-L1)/2-w/2+1mm
--- End Message ---
--- Begin Message ---
Author: rehar
Date: 2009-09-09 07:43:24 +0200 (Wed, 09 Sep 2009)
New Revision: 5623
Added:
trunk/gta02-core/modules/dfbm-cs320.fpd
Log:
started BT module footprint
Added: trunk/gta02-core/modules/dfbm-cs320.fpd
===================================================================
--- trunk/gta02-core/modules/dfbm-cs320.fpd (rev 0)
+++ trunk/gta02-core/modules/dfbm-cs320.fpd 2009-09-09 05:43:24 UTC (rev
5623)
@@ -0,0 +1,85 @@
+/*DFBM-CS320 Bluetooth Module*/
+frame pad_x{
+ ur: vec @(w/2,0mm)
+ ll: vec @(-w/2,-l)
+ pad "$name" ur ll
+}
+
+frame pad_y{
+ ur: vec @(0mm,w/2)
+ ll: vec @(-l,-w/2)
+ pad "$name" ur ll
+}
+frame pad_c{
+ set w = H
+ set l = E
+ loop z=28,(i+1)
+ set name = z
+ pos: vec @(A/2-(i-19)*(G+F)-(H/2+I+G/2)-I-G/2,B/2+H)
+ frame pad_x pos
+}
+frame pad_u{
+ set w = G
+ set l = H
+ set name = i
+ pos: vec @(A/2-(i-19)*(G+F)-I-G/2,B/2+H)
+ frame pad_x pos
+}
+frame pad_b{
+ set w = G
+ set l = -H
+ set name = i
+ pos: vec @(-A/2+(i-1)*(G+F)+I+G/2,-B/2-H)
+ frame pad_x pos
+}
+frame pad_l{
+ set w = G
+ set l = H
+ set name = i
+ pos: vec @(-A/2,B/2-(i-11)*(G+F)-(E-H)-F-G/2)
+ frame pad_y pos
+}
+frame pad_r{
+ set w = G
+ set l = -H
+ set name = i
+ pos: vec @(A/2,-B/2+(i-11)*(G+F)+(E-H)+F+G/2)
+ frame pad_y pos
+}
+frame pads_u{
+ loop i=19,27
+ frame pad_u @
+ frame pad_c @
+}
+
+frame pads_l{
+ loop i=11,17
+ frame pad_l @
+
+}
+frame pads_b{
+ loop i=1,9
+ frame pad_b @
+
+}
+frame pads_r{
+ loop i=11,17
+ frame pad_r @
+
+}
+package "DFBM-CS320"
+
+set A = 6.3mm
+set B = 5.3mm
+set E = 1.025mm
+set F = 0.3mm
+set G = 0.35mm
+set H = 0.8mm
+set I = 0.375mm
+
+frame pads_u @
+frame pads_l @
+frame pads_b @
+frame pads_r @
+measy pad_x.ll -> pad_y.ur 1mm
+/*measy pad_u.ll -> pads_u.pos 1mm*/
--- End Message ---
--- Begin Message ---
board/neo1973/gta02/gta02.c | 4 ++--
board/neo1973/gta02/pcf50633.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
New commits:
commit 4ed6f14590c443f20c12b2f39ec0c14f0c41c0f8
Author: Rask Ingemann Lambertsen <ccc94...@vip.cybercity.dk>
Date: Tue Aug 25 11:52:56 2009 +0200
U-Boot GTA02: Always enable charger on startup
This patch changes U-Boot to always enable the charger on startup. We
currently seem to have two ways of disabling the charger, _even when it
was already enabled_:
1) Press power button briefly (<1 s) while off and connected to power.
2) Try to turn on the device (by power button or plugging in power) when the
power source detected as 100 mA only with no (or discharged) battery
inserted.
There is no point in disabling the charger in these cases or in general.
Signed-off-by: Rask Ingemann Lambertsen <ccc94...@vip.cybercity.dk>
--- End Message ---
_______________________________________________
commitlog mailing list
commitlog@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/commitlog
