This is an automated email from the ASF dual-hosted git repository.
clebertsuconic pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/activemq-website.git
The following commit(s) were added to refs/heads/master by this push:
new d87afa8 Specify language in codeblocks so rouge does have to guess.
d87afa8 is described below
commit d87afa8530b8984430b42731f6d89403196694a3
Author: Pontus Ullgren <[email protected]>
AuthorDate: Wed Oct 9 13:28:17 2019 +0200
Specify language in codeblocks so rouge does have to guess.
---
src/integrating-apache-activemq-with-jboss.md | 20 ++++++++++----------
src/jboss-integration.md | 20 ++++++++++----------
src/jms-to-jms-bridge.md | 8 ++++----
src/sjsas-with-genericjmsra.md | 4 ++--
src/weblogic-integration.md | 10 +++++-----
5 files changed, 31 insertions(+), 31 deletions(-)
diff --git a/src/integrating-apache-activemq-with-jboss.md
b/src/integrating-apache-activemq-with-jboss.md
index 9c22303..c1a724e 100644
--- a/src/integrating-apache-activemq-with-jboss.md
+++ b/src/integrating-apache-activemq-with-jboss.md
@@ -207,7 +207,7 @@ For more information about JCA, please consult the [J2EE
Connector Architecture
Open the `META-INF/ra.xml` file and look for the following section:
`META-INF/ra.xml**
-```
+```xml
<config-property>
<description>
The URL to the ActiveMQ server that you want this connection to connect
to. If using
@@ -222,7 +222,7 @@ Open the `META-INF/ra.xml` file and look for the following
section:
The section above is used to tell the ActiveMQ RAR where ActiveMQ is located.
By default, the in-VM protocol is commented out in favor of the tcp protocol.
This will find ActiveMQ running on any interface on the localhost on port
61616. It's ok to just leave this alone if you don't mind the inefficiency of
communicating within the JVM via TCP. However, it is recommended that `vm://`
transport be used for an embedded broker, so comment out the `tcp://` transport
and uncomment the `vm://` [...]
`META-INF/ra.xml**
-```
+```xml
<config-property>
<description>
The URL to the ActiveMQ server that you want this connection to connect
to. If using
@@ -239,7 +239,7 @@ Because we're embedding ActiveMQ inside of JBoss, it is
more efficient to use th
Now look further down the `META-INF/ra.xml` file and locate the following
section:
`META-INF/ra.xml**
-```
+```xml
<config-property>
<description>
Sets the XML configuration file used to configure the embedded ActiveMQ
broker via
@@ -261,7 +261,7 @@ Now look further down the `META-INF/ra.xml` file and locate
the following sectio
The section above needs to be changed to uncomment the second to last line and
remove/replace the empty element that is above it. Below is an example of how
this should be changed:
`META-INF/ra.xml**
-```
+```xml
<config-property>
<description>
Sets the XML configuration file used to configure the embedded ActiveMQ
broker via
@@ -282,7 +282,7 @@ This change tells the ActiveMQ RAR to read a configuration
file named `broker-co
The `broker-config.xml` file _is_ the ActiveMQ configuration file. This is the
file used to configure ActiveMQ. The default contents of this file are usable,
but should be customized to suit your environment. There are several items of
note about this configuration. The most prominent sections to note in this file
are the `<persistenceAdapter>` element and the `<transportConnectors>` and
`<networkConnectors>` elements as seen below:
`broker-config.xml**
-```
+```xml
<beans xmlns="http://activemq.org/config/1.0";>
<broker useJmx="true">
@@ -313,22 +313,22 @@ The `broker-config.xml` file _is_ the ActiveMQ
configuration file. This is the f
</beans>
```
The first change to this file is to add the brokerName attribute to the broker
element and provide a name:
-```
+```xml
<broker useJmx="true" brokerName="bruce.broker1">
```
In addition, this same name is used further down the configuration to provide
a name for the `<transportConnector>` element:
-```
+```xml
<transportConnector name="bruce.broker1" uri="tcp://localhost:61616"
discoveryUri="multicast://default"/>
```
Now we'll tell ActiveMQ not to initialize JMX because we'll use the existing
one that JBoss has:
-```
+```xml
<!-- put the following as the first child of the broker tag -->
<managementContext><!-- we'll use an existing one (JBoss) instead of creating
one -->
<managementContext createConnector="false"/>
</managementContext>
```
The `<persistenceAdapter>` element should be reconfigured to store its data in
an appropriate place. On JBoss, that's most likely within the "data" directory
of the server configuration you're using. We're going to set this dynamically
using an XBean and Spring feature that allows us to inject system properties
values into the configuration. First this needs to be enabled:
-```
+```xml
<!-- put the following as the first child of the beans element -->
<bean xmlns=""
class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"/>
```
@@ -380,7 +380,7 @@ Configuring JBoss
The sixth step is to configure JBoss to initialize and start ActiveMQ whenever
JBoss starts up. This is accomplished using an XML file that abides by the
[JBoss JCA DTD](http://www.jboss.org/j2ee/dtd/jboss-ds_1_5.dtd) for data
sources. Like most other Java application servers on the market, the JBoss
architecture uses the J2EE Connector Architecture to manage connections of any
kind including JDBC, JMS, etc. and the JBoss JCA DTD denotes the allowed
contents for creating an XML data sour [...]
`activemq-jms-ds.xml**
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE connection-factories
diff --git a/src/jboss-integration.md b/src/jboss-integration.md
index 9c22303..c1a724e 100644
--- a/src/jboss-integration.md
+++ b/src/jboss-integration.md
@@ -207,7 +207,7 @@ For more information about JCA, please consult the [J2EE
Connector Architecture
Open the `META-INF/ra.xml` file and look for the following section:
`META-INF/ra.xml**
-```
+```xml
<config-property>
<description>
The URL to the ActiveMQ server that you want this connection to connect
to. If using
@@ -222,7 +222,7 @@ Open the `META-INF/ra.xml` file and look for the following
section:
The section above is used to tell the ActiveMQ RAR where ActiveMQ is located.
By default, the in-VM protocol is commented out in favor of the tcp protocol.
This will find ActiveMQ running on any interface on the localhost on port
61616. It's ok to just leave this alone if you don't mind the inefficiency of
communicating within the JVM via TCP. However, it is recommended that `vm://`
transport be used for an embedded broker, so comment out the `tcp://` transport
and uncomment the `vm://` [...]
`META-INF/ra.xml**
-```
+```xml
<config-property>
<description>
The URL to the ActiveMQ server that you want this connection to connect
to. If using
@@ -239,7 +239,7 @@ Because we're embedding ActiveMQ inside of JBoss, it is
more efficient to use th
Now look further down the `META-INF/ra.xml` file and locate the following
section:
`META-INF/ra.xml**
-```
+```xml
<config-property>
<description>
Sets the XML configuration file used to configure the embedded ActiveMQ
broker via
@@ -261,7 +261,7 @@ Now look further down the `META-INF/ra.xml` file and locate
the following sectio
The section above needs to be changed to uncomment the second to last line and
remove/replace the empty element that is above it. Below is an example of how
this should be changed:
`META-INF/ra.xml**
-```
+```xml
<config-property>
<description>
Sets the XML configuration file used to configure the embedded ActiveMQ
broker via
@@ -282,7 +282,7 @@ This change tells the ActiveMQ RAR to read a configuration
file named `broker-co
The `broker-config.xml` file _is_ the ActiveMQ configuration file. This is the
file used to configure ActiveMQ. The default contents of this file are usable,
but should be customized to suit your environment. There are several items of
note about this configuration. The most prominent sections to note in this file
are the `<persistenceAdapter>` element and the `<transportConnectors>` and
`<networkConnectors>` elements as seen below:
`broker-config.xml**
-```
+```xml
<beans xmlns="http://activemq.org/config/1.0";>
<broker useJmx="true">
@@ -313,22 +313,22 @@ The `broker-config.xml` file _is_ the ActiveMQ
configuration file. This is the f
</beans>
```
The first change to this file is to add the brokerName attribute to the broker
element and provide a name:
-```
+```xml
<broker useJmx="true" brokerName="bruce.broker1">
```
In addition, this same name is used further down the configuration to provide
a name for the `<transportConnector>` element:
-```
+```xml
<transportConnector name="bruce.broker1" uri="tcp://localhost:61616"
discoveryUri="multicast://default"/>
```
Now we'll tell ActiveMQ not to initialize JMX because we'll use the existing
one that JBoss has:
-```
+```xml
<!-- put the following as the first child of the broker tag -->
<managementContext><!-- we'll use an existing one (JBoss) instead of creating
one -->
<managementContext createConnector="false"/>
</managementContext>
```
The `<persistenceAdapter>` element should be reconfigured to store its data in
an appropriate place. On JBoss, that's most likely within the "data" directory
of the server configuration you're using. We're going to set this dynamically
using an XBean and Spring feature that allows us to inject system properties
values into the configuration. First this needs to be enabled:
-```
+```xml
<!-- put the following as the first child of the beans element -->
<bean xmlns=""
class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"/>
```
@@ -380,7 +380,7 @@ Configuring JBoss
The sixth step is to configure JBoss to initialize and start ActiveMQ whenever
JBoss starts up. This is accomplished using an XML file that abides by the
[JBoss JCA DTD](http://www.jboss.org/j2ee/dtd/jboss-ds_1_5.dtd) for data
sources. Like most other Java application servers on the market, the JBoss
architecture uses the J2EE Connector Architecture to manage connections of any
kind including JDBC, JMS, etc. and the JBoss JCA DTD denotes the allowed
contents for creating an XML data sour [...]
`activemq-jms-ds.xml**
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE connection-factories
diff --git a/src/jms-to-jms-bridge.md b/src/jms-to-jms-bridge.md
index 660bfb9..957b0d8 100644
--- a/src/jms-to-jms-bridge.md
+++ b/src/jms-to-jms-bridge.md
@@ -115,7 +115,7 @@ outboundQueueName|null|the foreign queue name to send to
### Example XBean Configuration
The following [example config
file](http://svn.apache.org/repos/asf/activemq/trunk/activemq-unit-tests/src/test/resources/org/apache/activemq/network/jms/queue-xbean.xml)
shows how to use the regular [Xml Configuration](xml-configuration) to
configure a JMS to JMS bridge.
-```
+```xml
<broker xmlns="http://activemq.apache.org/schema/core"; id="localbroker"
brokerName="localBroker" persistent="false">
<jmsBridgeConnectors>
@@ -141,7 +141,7 @@ The following [example config
file](http://svn.apache.org/repos/asf/activemq/tru
### Example pure Spring Configuration
The following example shows how to use raw Spring XML to wire together a
broker - bridging to a Foreign JMS provider
-```
+```xml
<!-- local broker with embedded Jms to Jms bridge (ok - it's contrived) -->
<bean id="localbroker" class="org.apache.activemq.broker.BrokerService"
init-method="start">
@@ -186,7 +186,7 @@ The following example shows how to use raw Spring XML to
wire together a broker
### Example XBean Configuration to Bridge ActiveMQ to Provider With No URL
Setter
Some JMS providers, WebLogic for instance, do not expose a setter for
connection properties like host and port (setBrokerUrl) on their
ConnectionFactory object. In this case you need to set
outboundQueueConnectionFactoryName and jndiOutboundTemplate in your
activemq.xml config file.
-```
+```xml
<!-- START SNIPPET: example -->
<beans>
@@ -246,7 +246,7 @@ Some JMS providers, WebLogic for instance, do not expose a
setter for connection
### Example pure Spring Configuration for sending messages to external
ActiveMQ destination through bridge
Spring beans:
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN"
"http://www.springframework.org/dtd/spring-beans.dtd";>
diff --git a/src/sjsas-with-genericjmsra.md b/src/sjsas-with-genericjmsra.md
index 54d81e7..8892e6b 100644
--- a/src/sjsas-with-genericjmsra.md
+++ b/src/sjsas-with-genericjmsra.md
@@ -68,7 +68,7 @@ genericra.rar
mymodules.jar
```
Inside the mymodules.jar (where I put my MDB), the sun-ejb-jar.xml should look
like this:
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar
PUBLIC "-//Sun Microsystems, Inc.//DTD Application Server 8.1 EJB 2.1//EN"
@@ -98,7 +98,7 @@ Inside the mymodules.jar (where I put my MDB), the
sun-ejb-jar.xml should look l
</sun-ejb-jar>
```
And the application.xml should look like this:
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<application
xmlns="http://java.sun.com/xml/ns/javaee";
diff --git a/src/weblogic-integration.md b/src/weblogic-integration.md
index 0e03d5a..fd0150e 100644
--- a/src/weblogic-integration.md
+++ b/src/weblogic-integration.md
@@ -151,7 +151,7 @@ This section discusses the code, libraries, and
configuration files necessary to
ActiveMQ needs to start when the web application is deployed or started, and
stop when the web application is stopped or undeployed. The easiest way to do
this is to a use the commonly available Spring listeners, which start a Spring
context, which can point ActiveMQ to an XBean configuration file, which starts
ActiveMQ. A little roundabout, but it works well in practice with very little
configuration.
**J2EE WEB-INF/web.xml**
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="2.4"
@@ -164,7 +164,7 @@ ActiveMQ needs to start when the web application is
deployed or started, and sto
</web-app>
```
**Spring WEB-INF/applicationContext.xml**
-```
+```xml
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN"
"http://www.springframework.org/dtd/spring-beans.dtd";>
<beans>
@@ -365,7 +365,7 @@ This section shows three sample ActiveMQ configuration
files – one for a singl
It also shows a Log4J configuration file, which controls the ActiveMQ log
output.
**Single Broker**
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://activemq.org/config/1.0";>
<!-- Allows us to use system properties as variables in this configuration
file -->
@@ -421,7 +421,7 @@ It also shows a Log4J configuration file, which controls
the ActiveMQ log output
```
**Network of Brokers (Broker 1/2)**
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://activemq.org/config/1.0";>
<!-- Allows us to use system properties as variables in this configuration
file -->
@@ -483,7 +483,7 @@ It also shows a Log4J configuration file, which controls
the ActiveMQ log output
```
**Network of Brokers (Broker 2/2)**
-```
+```xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://activemq.org/config/1.0";>
<!-- Allows us to use system properties as variables in this configuration
file -->
