http://git-wip-us.apache.org/repos/asf/camel/blob/e5973850/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl ---------------------------------------------------------------------- diff --git a/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl b/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl index d58f191..ded219d 100644 --- a/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl +++ b/components/camel-schematron/src/main/resources/iso-schematron-xslt2/iso_dsdl_include.xsl @@ -1,12 +1,27 @@ -<?xml version="1.0" encoding="UTF-8"?><?xar XSLT?> - +<?xml version="1.0" encoding="UTF-8"?><?xar XSLT?> +<!-- + Licensed to the Apache Software Foundation (ASF) under one or more + contributor license agreements. See the NOTICE file distributed with + this work for additional information regarding copyright ownership. + The ASF licenses this file to You under the Apache License, Version 2.0 + (the "License"); you may not use this file except in compliance with + the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +--> <!-- OVERVIEW : iso_dsdl_include.xsl This is an inclusion preprocessor for the non-smart text inclusions of ISO DSDL. It handles <relax:extRef> for ISO RELAX NG - <sch:include> for ISO Schematron and Schematron 1.n + <sch:include> for ISO Schematron and Schematron 1.n <sch:extends> for 2009 draft ISO Schematron <xi:xinclude> simple W3C XIncludes for ISO NVRL and DSRL <crdl:ref> for draft ISO CRDL @@ -22,266 +37,276 @@ * @xml:id * id() for typed schemas (e.g. from DTD) [NOTE: XInclude does not support this] * untyped @id - - The proposed behaviour for the update to ISO Schematron has been implemented. If an - include points to an element with the same name as the parent, then that element's - contents will be included. This supports the merge style of inclusion. - - When an inclusion is made, it is preceded by a PI with target DSDL_INCLUDE_START - and the href and closed by a PI with target DSDL_INCLUDE_START and the href. This is - to allow better location of problems, though only to the file level. - - Limitations: - * No rebasing: relative paths will be interpreted based on the initial document's - path, not the including document. (Severe limitation!) - * No checking for circular references - * Not full xpointers: only ID matching - * <relax:include> not implemented - * XInclude handling of xml:base and xml:lang not implemented ---> + + The proposed behaviour for the update to ISO Schematron has been implemented. If an + include points to an element with the same name as the parent, then that element's + contents will be included. This supports the merge style of inclusion. + + When an inclusion is made, it is preceded by a PI with target DSDL_INCLUDE_START + and the href and closed by a PI with target DSDL_INCLUDE_START and the href. This is + to allow better location of problems, though only to the file level. + + Limitations: + * No rebasing: relative paths will be interpreted based on the initial document's + path, not the including document. (Severe limitation!) + * No checking for circular references + * Not full xpointers: only ID matching + * <relax:include> not implemented + * XInclude handling of xml:base and xml:lang not implemented +--> +<!-- +Open Source Initiative OSI - The MIT License:Licensing +[OSI Approved License] + +This source code was previously available under the zlib/libpng license. +Attribution is polite. + +The MIT License + +Copyright (c) 2008-2010 Rick Jelliffe + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. +--> + <!-- - VERSION INFORMATION - 2010-04-21 - * Add basic syntax checks on XPaths belonging to Schematron elements only - * Unlocalized messages are put out using xsl:message. The intent is to allow - * problems to be caught at compile time. - 2009-02-25 - * Update DSDL namespace to use schematron.com - * Tested with SAXON9, Xalan 2.7.1, IE7, - * IE does not like multiple variables in same template with same name: rename. - 2008-09-18 - * Remove new behaviour for include, because it conflicts with existing usage [KH] - * Add extends[@href] element with that merge functionality - * Generate PIs to notate source of inclusions for potential better diagnostics - - 2008-09-16 - * Fix for XSLT1 - - 2008-08-28 - * New behaviour for schematron includes: if the pointed to element is the same as the current, - include the children. - - 2008-08-20 - * Fix bug: in XSLT1 cannot do $document/id('x') but need to use for-each - - 2008-08-04 - * Add support for inclusions in old namespace - - 2008-08-03 - * Fix wrong param name include-relaxng & include-crdl (KH, PH) - * Allow inclusion of XSLT and XHTML (KH) - * Fix inclusion of fragments (KH) - - 2008-07-25 - * Add selectable input parameter - - 2008-07-24 - * RJ New ---> -<!-- - LEGAL INFORMATION - - Copyright (c) 2008 Rick Jelliffe - - This software is provided 'as-is', without any express or implied warranty. - In no event will the authors be held liable for any damages arising from - the use of this software. - - Permission is granted to anyone to use this software for any purpose, - including commercial applications, and to alter it and redistribute it freely, - subject to the following restrictions: - - 1. The origin of this software must not be misrepresented; you must not claim - that you wrote the original software. If you use this software in a product, - an acknowledgment in the product documentation would be appreciated but is - not required. - - 2. Altered source versions must be plainly marked as such, and must not be - misrepresented as being the original software. - - 3. This notice may not be removed or altered from any source distribution. ---> -<xslt:stylesheet version="1.0" - xmlns:xslt="http://www.w3.org/1999/XSL/Transform"; - xmlns:xsl="http://www.w3.org/1999/XSL/Transform"; - xmlns:iso="http://purl.oclc.org/dsdl/schematron"; - xmlns:nvdl="http://purl.oclc.org/dsdl/nvdl"; - xmlns:xhtml="http://www.w3.org/1999/xhtml"; - xmlns:schold="http://www.ascc.net/xml/schematron"; - xmlns:crdl="http://purl.oclc.org/dsdl/crepdl/ns/structure/1.0"; - xmlns:xi="http://www.w3.org/2001/XInclude"; - xmlns:dtll="http://www.jenitennison.com/datatypes"; - xmlns:dsdl="http://www.schematron.com/namespace/dsdl"; - xmlns:relax="http://relaxng.org/ns/structure/1.0"; - xmlns:xlink="http://www.w3.org/1999/xlink"; - - - xmlns:sch-check="http://www.schematron.com/namespace/sch-check"; - > - <!-- Note: The URL for the dsdl namespace is not official --> - - - <xsl:param name="include-schematron">true</xsl:param> - <xsl:param name="include-crdl">true</xsl:param> - <xsl:param name="include-xinclude">true</xsl:param> - <xsl:param name="include-dtll">true</xsl:param> - <xsl:param name="include-relaxng">true</xsl:param> - <xsl:param name="include-xlink">true</xsl:param> - - - <!-- ========================================================== --> - <!-- Output and process contents, check Schematron XPaths too --> - <!-- ========================================================== --> - - <xsl:template match="/"> - <xsl:apply-templates select="." mode="dsdl:go" /> - </xsl:template> - - <!-- output everything else unchanged. But check Xpaths here. --> - - <xslt:template match="iso:rule[@context]" mode="dsdl:go"> - <xsl:call-template name="sch-check:xpath-wf-message"> - <xsl:with-param name="string" select=" @context " /> - <xsl:with-param name="subject" select=" 'Bad rule: ' " /> - </xsl:call-template> - - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xslt:template> - - <xslt:template match="iso:assert[@test]" mode="dsdl:go"> - <xsl:call-template name="sch-check:xpath-wf-message"> - <xsl:with-param name="string" select=" @test " /> - <xsl:with-param name="subject" select=" 'Bad assert: ' " /> - </xsl:call-template> - - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xslt:template> - - <xslt:template match="iso:report[@test]" mode="dsdl:go"> - <xsl:call-template name="sch-check:xpath-wf-message"> - <xsl:with-param name="string" select=" @test " /> - <xsl:with-param name="subject" select=" 'Bad report: ' " /> - </xsl:call-template> - - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xslt:template> - - <xslt:template match="iso:let[@value]" mode="dsdl:go"> - <xsl:call-template name="sch-check:xpath-wf-message"> - <xsl:with-param name="string" select=" @value " /> - <xsl:with-param name="subject" select=" 'Bad let: ' " /> - </xsl:call-template> - - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xslt:template> - - - <xslt:template match="iso:value-of[@select]" mode="dsdl:go"> - <xsl:call-template name="sch-check:xpath-wf-message"> - <xsl:with-param name="string" select=" @select " /> - <xsl:with-param name="subject" select=" 'Bad value-of: ' " /> - </xsl:call-template> - - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xslt:template> - - <xslt:template match="iso:name[@path]" mode="dsdl:go"> - <xsl:call-template name="sch-check:xpath-wf-message"> - <xsl:with-param name="string" select=" @select " /> - <xsl:with-param name="subject" select=" 'Bad name element: ' " /> - </xsl:call-template> - - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xslt:template> - - <!-- output everything else unchanged --> - <xslt:template match="node()" priority="-1" mode="dsdl:go"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xslt:template> - - - - <!-- =========================================================== --> - <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> - <!-- Part 2 - Regular grammar-based validation - RELAX NG --> - <!-- This only implements relax:extRef not relax:include which --> - <!-- is complex. --> - <!-- =========================================================== --> - <xslt:template match="relax:extRef" mode="dsdl:go"> - - - <!-- Insert subschema --> - - <xsl:variable name="document-uri" - select="substring-before(concat(@href,'#'), '#')" /> - <xsl:variable name="fragment-id" - select="substring-after(@href, '#')" /> - - <xsl:processing-instruction name="DSDL_INCLUDE_START"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - <xsl:choose> - <xsl:when test="not( $include-relaxng = 'true' )"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xsl:when> - <xsl:otherwise> - - <xsl:choose> - - <xsl:when - test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> - <xsl:message> - Error: Impossible URL in RELAX NG extRef - include - </xsl:message> - </xsl:when> - - <!-- this case is when there is in embedded schema in the same document elsewhere --> - <xslt:when - test="string-length( $document-uri ) = 0"> - <xslt:apply-templates mode="dsdl:go" - select="//*[@xml:id= $fragment-id ] | id( $fragment-id) | //*[@id= $fragment-id ]" /> - </xslt:when> - - <xsl:when - test="string-length( $fragment-id ) > 0"> - <xsl:variable name="theDocument_1" - select="document( $document-uri,/ )" /> - - <xsl:if test="not($theDocument_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <!-- use a for-each so that the id() function works correctly on the external document --> - <xsl:for-each select="$theDocument_1"> - <xsl:variable name="theFragment_1" - select="$theDocument_1//*[@xml:id= $fragment-id ] + VERSION INFORMATION + 2010-07-10 + * Move to MIT license + 2010-04-21 + * Add basic syntax checks on XPaths belonging to Schematron elements only + * Unlocalized messages are put out using xsl:message. The intent is to allow + * problems to be caught at compile time. + 2009-02-25 + * Update DSDL namespace to use schematron.com + * Tested with SAXON9, Xalan 2.7.1, IE7, + * IE does not like multiple variables in same template with same name: rename. + 2008-09-18 + * Remove new behaviour for include, because it conflicts with existing usage [KH] + * Add extends[@href] element with that merge functionality + * Generate PIs to notate source of inclusions for potential better diagnostics + + 2008-09-16 + * Fix for XSLT1 + + 2008-08-28 + * New behaviour for schematron includes: if the pointed to element is the same as the current, + include the children. [Note: this has been removed: use sch:extends with @href.] + + 2008-08-20 + * Fix bug: in XSLT1 cannot do $document/id('x') but need to use for-each + + 2008-08-04 + * Add support for inclusions in old namespace + + 2008-08-03 + * Fix wrong param name include-relaxng & include-crdl (KH, PH) + * Allow inclusion of XSLT and XHTML (KH) + * Fix inclusion of fragments (KH) + + 2008-07-25 + * Add selectable input parameter + + 2008-07-24 + * RJ New +--> + +<xslt:stylesheet version="1.0" + xmlns:xslt="http://www.w3.org/1999/XSL/Transform"; + xmlns:xsl="http://www.w3.org/1999/XSL/Transform"; + xmlns:iso="http://purl.oclc.org/dsdl/schematron"; + xmlns:nvdl="http://purl.oclc.org/dsdl/nvdl"; + xmlns:xhtml="http://www.w3.org/1999/xhtml"; + xmlns:schold="http://www.ascc.net/xml/schematron"; + xmlns:crdl="http://purl.oclc.org/dsdl/crepdl/ns/structure/1.0"; + xmlns:xi="http://www.w3.org/2001/XInclude"; + xmlns:dtll="http://www.jenitennison.com/datatypes"; + xmlns:dsdl="http://www.schematron.com/namespace/dsdl"; + xmlns:relax="http://relaxng.org/ns/structure/1.0"; + xmlns:xlink="http://www.w3.org/1999/xlink"; + + + xmlns:sch-check="http://www.schematron.com/namespace/sch-check"; + > + <!-- Note: The URL for the dsdl namespace is not official --> + + + <xsl:param name="include-schematron">true</xsl:param> + <xsl:param name="include-crdl">true</xsl:param> + <xsl:param name="include-xinclude">true</xsl:param> + <xsl:param name="include-dtll">true</xsl:param> + <xsl:param name="include-relaxng">true</xsl:param> + <xsl:param name="include-xlink">true</xsl:param> + + + <!-- ========================================================== --> + <!-- Output and process contents, check Schematron XPaths too --> + <!-- ========================================================== --> + + <xsl:template match="/"> + <xsl:apply-templates select="." mode="dsdl:go" /> + </xsl:template> + + <!-- output everything else unchanged. But check Xpaths here. --> + + <xslt:template match="iso:rule[@context]" mode="dsdl:go"> + <xsl:call-template name="sch-check:xpath-wf-message"> + <xsl:with-param name="string" select=" @context " /> + <xsl:with-param name="subject" select=" 'Bad rule: ' " /> + </xsl:call-template> + + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xslt:template> + + <xslt:template match="iso:assert[@test]" mode="dsdl:go"> + <xsl:call-template name="sch-check:xpath-wf-message"> + <xsl:with-param name="string" select=" @test " /> + <xsl:with-param name="subject" select=" 'Bad assert: ' " /> + </xsl:call-template> + + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xslt:template> + + <xslt:template match="iso:report[@test]" mode="dsdl:go"> + <xsl:call-template name="sch-check:xpath-wf-message"> + <xsl:with-param name="string" select=" @test " /> + <xsl:with-param name="subject" select=" 'Bad report: ' " /> + </xsl:call-template> + + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xslt:template> + + <xslt:template match="iso:let[@value]" mode="dsdl:go"> + <xsl:call-template name="sch-check:xpath-wf-message"> + <xsl:with-param name="string" select=" @value " /> + <xsl:with-param name="subject" select=" 'Bad let: ' " /> + </xsl:call-template> + + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xslt:template> + + + <xslt:template match="iso:value-of[@select]" mode="dsdl:go"> + <xsl:call-template name="sch-check:xpath-wf-message"> + <xsl:with-param name="string" select=" @select " /> + <xsl:with-param name="subject" select=" 'Bad value-of: ' " /> + </xsl:call-template> + + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xslt:template> + + <xslt:template match="iso:name[@path]" mode="dsdl:go"> + <xsl:call-template name="sch-check:xpath-wf-message"> + <xsl:with-param name="string" select=" @select " /> + <xsl:with-param name="subject" select=" 'Bad name element: ' " /> + </xsl:call-template> + + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xslt:template> + + <!-- output everything else unchanged --> + <xslt:template match="node()" priority="-1" mode="dsdl:go"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xslt:template> + + + + <!-- =========================================================== --> + <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> + <!-- Part 2 - Regular grammar-based validation - RELAX NG --> + <!-- This only implements relax:extRef not relax:include which --> + <!-- is complex. --> + <!-- =========================================================== --> + <xslt:template match="relax:extRef" mode="dsdl:go"> + + + <!-- Insert subschema --> + + <xsl:variable name="document-uri" + select="substring-before(concat(@href,'#'), '#')" /> + <xsl:variable name="fragment-id" + select="substring-after(@href, '#')" /> + + <xsl:processing-instruction name="DSDL_INCLUDE_START"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + <xsl:choose> + <xsl:when test="not( $include-relaxng = 'true' )"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xsl:when> + <xsl:otherwise> + + <xsl:choose> + + <xsl:when + test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> + <xsl:message> + Error: Impossible URL in RELAX NG extRef + include + </xsl:message> + </xsl:when> + + <!-- this case is when there is in embedded schema in the same document elsewhere --> + <xslt:when + test="string-length( $document-uri ) = 0"> + <xslt:apply-templates mode="dsdl:go" + select="//*[@xml:id= $fragment-id ] | id( $fragment-id) | //*[@id= $fragment-id ]" /> + </xslt:when> + + <xsl:when + test="string-length( $fragment-id ) > 0"> + <xsl:variable name="theDocument_1" + select="document( $document-uri,/ )" /> + + <xsl:if test="not($theDocument_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <!-- use a for-each so that the id() function works correctly on the external document --> + <xsl:for-each select="$theDocument_1"> + <xsl:variable name="theFragment_1" + select="$theDocument_1//*[@xml:id= $fragment-id ] | id( $fragment-id) | $theDocument_1//*[@id= $fragment-id ]" /> <xsl:if test="not($theFragment_1)"> @@ -290,120 +315,120 @@ <xsl:value-of select="@href" /> </xsl:message> </xsl:if> - <xsl:apply-templates - select=" $theFragment_1[1]" mode="dsdl:go" /> - </xsl:for-each> - </xsl:when> - - <xsl:otherwise> - <xsl:variable name="theDocument_2" - select="document( $document-uri,/ )" /> - <xsl:variable name="theFragment_2" - select="$theDocument_2/*" /> - <xsl:if test="not($theDocument_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - - <xsl:if test="not($theFragment_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <xsl:apply-templates select="$theFragment_2 " - mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - - </xsl:otherwise> - </xsl:choose> - - <xsl:processing-instruction name="DSDL_INCLUDE_END"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - </xslt:template> - - - - <!-- =========================================================== --> - <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> - <!-- Part 3 - Rule-based validation - Schematron --> - <!-- =========================================================== --> - - - <!-- Extend the URI syntax to allow # references --> - <!-- Add experimental support for simple containers like /xxx:xxx/iso:pattern to allow better includes --> - <xsl:template match="iso:include" mode="dsdl:go"> - - <xsl:variable name="document-uri" - select="substring-before(concat(@href,'#'), '#')" /> - <xsl:variable name="fragment-id" - select="substring-after(@href, '#')" /> - - - <xsl:processing-instruction name="DSDL_INCLUDE_START"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - - <xsl:choose> - <xsl:when test="not( $include-schematron = 'true' )"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xsl:when> - <xsl:otherwise> - - <xsl:choose> - - <xsl:when - test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> - <xsl:message> - Error: Impossible URL in Schematron include - </xsl:message> - </xsl:when> - - <!-- this case is when there is in embedded schema in the same document elsewhere --> - <xslt:when - test="string-length( $document-uri ) = 0"> - <xslt:apply-templates mode="dsdl:go" + <xsl:apply-templates + select=" $theFragment_1[1]" mode="dsdl:go" /> + </xsl:for-each> + </xsl:when> + + <xsl:otherwise> + <xsl:variable name="theDocument_2" + select="document( $document-uri,/ )" /> + <xsl:variable name="theFragment_2" + select="$theDocument_2/*" /> + <xsl:if test="not($theDocument_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + + <xsl:if test="not($theFragment_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to locate id attribute: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <xsl:apply-templates select="$theFragment_2 " + mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + + </xsl:otherwise> + </xsl:choose> + + <xsl:processing-instruction name="DSDL_INCLUDE_END"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + </xslt:template> + + + + <!-- =========================================================== --> + <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> + <!-- Part 3 - Rule-based validation - Schematron --> + <!-- =========================================================== --> + + + <!-- Extend the URI syntax to allow # references --> + <!-- Add experimental support for simple containers like /xxx:xxx/iso:pattern to allow better includes --> + <xsl:template match="iso:include" mode="dsdl:go"> + + <xsl:variable name="document-uri" + select="substring-before(concat(@href,'#'), '#')" /> + <xsl:variable name="fragment-id" + select="substring-after(@href, '#')" /> + + + <xsl:processing-instruction name="DSDL_INCLUDE_START"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + + <xsl:choose> + <xsl:when test="not( $include-schematron = 'true' )"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xsl:when> + <xsl:otherwise> + + <xsl:choose> + + <xsl:when + test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> + <xsl:message> + Error: Impossible URL in Schematron include + </xsl:message> + </xsl:when> + + <!-- this case is when there is in embedded schema in the same document elsewhere --> + <xslt:when + test="string-length( $document-uri ) = 0"> + <xslt:apply-templates mode="dsdl:go" select="//iso:*[@xml:id= $fragment-id ] |id( $fragment-id) | //iso:*[@id= $fragment-id ]" /> </xslt:when> <!-- case where there is a fragment in another document (should be an iso: element) --> - <!-- There are three cases for includes with fragment: - 0) No href file or no matching id - error! - 1) REMOVED - - 2) The linked-to element is sch:schema however the parent of the include - is not a schema. In this case, it is an error. (Actually, it should - be an error for other kinds of containment problems, but we won't - check for them in this version.) - - 3) Otherwise, include the pointed-to element - --> - - <xsl:when - test="string-length( $fragment-id ) > 0"> - <xsl:variable name="theDocument_1" - select="document( $document-uri,/ )" /> - <xsl:variable name="originalParent" select=".." /> - - <!-- case 0 --> - <xsl:if test="not($theDocument_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <!-- use for-each to rebase id() to external document --> - <xsl:for-each select="$theDocument_1"> - <xsl:variable name="theFragment_1" + <!-- There are three cases for includes with fragment: + 0) No href file or no matching id - error! + 1) REMOVED + + 2) The linked-to element is sch:schema however the parent of the include + is not a schema. In this case, it is an error. (Actually, it should + be an error for other kinds of containment problems, but we won't + check for them in this version.) + + 3) Otherwise, include the pointed-to element + --> + + <xsl:when + test="string-length( $fragment-id ) > 0"> + <xsl:variable name="theDocument_1" + select="document( $document-uri,/ )" /> + <xsl:variable name="originalParent" select=".." /> + + <!-- case 0 --> + <xsl:if test="not($theDocument_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <!-- use for-each to rebase id() to external document --> + <xsl:for-each select="$theDocument_1"> + <xsl:variable name="theFragment_1" select=" $theDocument_1//iso:*[@xml:id= $fragment-id ] | id($fragment-id) | $theDocument_1//iso:*[@id= $fragment-id ]" /> @@ -422,440 +447,440 @@ <!-- case 1 REMOVED --> <!-- case 2 --> - <xsl:when - test=" $theFragment_1/self::iso:schema "> - <xsl:message> - Schema error: Use include to - include fragments, not a whole - schema - </xsl:message> - </xsl:when> - - <!-- case 3 --> - <xsl:otherwise> - <xsl:apply-templates - select=" $theFragment_1[1]" mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - </xsl:for-each> - </xsl:when> - - <!-- Case where there is no ID so we include the whole document --> - <!-- Experimental addition: include fragments of children --> - <xsl:otherwise> - <xsl:variable name="theDocument_2" - select="document( $document-uri,/ )" /> - <xsl:variable name="theFragment_2" - select="$theDocument_2/iso:*" /> - <xsl:variable name="theContainedFragments" - select="$theDocument_2/*/iso:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" /> - <xsl:if test="not($theDocument_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - - <!-- There are three cases for includes: - 0) No text specified- error! - - 1) REMOVED - - 2) The linked-to element is sch:schema however the parent of the include - is not a schema. In this case, it is an error. (Actually, it should - be an error for other kinds of containment problems, but we won't - check for them in this version.) - - 3) Otherwise, include the pointed-to element - --> - <xsl:choose> - <!-- case 0 --> - <xsl:when - test="not($theFragment_2) and not ($theContainedFragments)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:when> - - <!-- case 1 removed --> - - <!-- case 2 --> - <xsl:when - test=" $theFragment_2/self::iso:schema or $theContainedFragments/self::iso:schema"> - <xsl:message> - Schema error: Use include to include - fragments, not a whole schema - </xsl:message> - </xsl:when> - - <!-- If this were XLST 2, we could use - if ($theFragment) then $theFragment else $theContainedFragments - here (thanks to KN) - --> - <!-- case 3 --> - <xsl:otherwise> - <xsl:apply-templates - select="$theFragment_2 " mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - </xsl:otherwise> - </xsl:choose> - </xsl:otherwise> - </xsl:choose> - - <xsl:processing-instruction name="DSDL_INCLUDE_END"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - </xsl:template> - - - <!-- WARNING sch:extends[@href] is experimental and non standard --> - <!-- Basically, it adds the children of the selected element, not the element itself. --> - <xsl:template match="iso:extends[@href]" mode="dsdl:go"> - - <xsl:variable name="document-uri" - select="substring-before(concat(@href,'#'), '#')" /> - <xsl:variable name="fragment-id" - select="substring-after(@href, '#')" /> - - - <xsl:processing-instruction name="DSDL_INCLUDE_START"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - - <xsl:choose> - <xsl:when test="not( $include-schematron = 'true' )"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xsl:when> - <xsl:otherwise> - - <xsl:choose> - - <xsl:when - test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> - <xsl:message> - Error: Impossible URL in Schematron include - </xsl:message> - </xsl:when> - - <!-- this case is when there is in embedded schema in the same document elsewhere --> - <xslt:when - test="string-length( $document-uri ) = 0"> - <xslt:apply-templates mode="dsdl:go" - select="//iso:*[@xml:id= $fragment-id ]/* - |id( $fragment-id)/* - | //iso:*[@id= $fragment-id ]/*" /> - </xslt:when> - - <!-- case where there is a fragment in another document (should be an iso: element) --> - <!-- There are three cases for includes with fragment: - 0) No href file or no matching id - error! - 1) REMOVED - - 2) REMOVED - - 3) Otherwise, include the pointed-to element - --> - - <xsl:when - test="string-length( $fragment-id ) > 0"> - <xsl:variable name="theDocument_1" - select="document( $document-uri,/ )" /> - <xsl:variable name="originalParent" select=".." /> - - <!-- case 0 --> - <xsl:if test="not($theDocument_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <!-- use for-each to rebase id() to external document --> - <xsl:for-each select="$theDocument_1"> - <xsl:variable name="theFragment_1" - select=" $theDocument_1//iso:*[@xml:id= $fragment-id ] | - id($fragment-id) | - $theDocument_1//iso:*[@id= $fragment-id ]" /> - - - <xsl:choose> - <!-- case 0 --> - <xsl:when test="not($theFragment_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:when> - - - <!-- case 1 REMOVED --> - - <!-- case 2 REMOVED --> - - - <!-- case 3 --> - <xsl:otherwise> - - <xsl:apply-templates - select=" $theFragment_1[1]/*" mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - </xsl:for-each> - </xsl:when> - - <!-- Case where there is no ID so we include the whole document --> - <!-- Experimental addition: include fragments of children --> - <xsl:otherwise> - <xsl:variable name="theDocument_2" - select="document( $document-uri,/ )" /> - <xsl:variable name="theFragment_2" - select="$theDocument_2/iso:*" /> - <xsl:variable name="theContainedFragments" - select="$theDocument_2/*/iso:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" /> - <xsl:if test="not($theDocument_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - - <!-- There are three cases for includes: - 0) No text specified- error! - - 1) REMOVED - - 2) REMOVED - - 3) Otherwise, include the pointed-to element - --> - <xsl:choose> - <!-- case 0 --> - <xsl:when - test="not($theFragment_2) and not ($theContainedFragments)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:when> - - <!-- case 1 removed --> - - <!-- case 2 removed --> - - <!-- If this were XLST 2, we could use - if ($theFragment) then $theFragment else $theContainedFragments - here (thanks to KN) - --> - <!-- case 3 --> - <xsl:otherwise> - <xsl:apply-templates - select="$theFragment_2/* " mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - </xsl:otherwise> - </xsl:choose> - </xsl:otherwise> - </xsl:choose> - - <xsl:processing-instruction name="DSDL_INCLUDE_END"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - </xsl:template> - - - - <!-- =========================================================== --> - <!-- Handle Schematron 1.6 inclusions: clone of ISO code above --> - <!-- =========================================================== --> - - - <!-- Extend the URI syntax to allow # references --> - <!-- Add experimental support for simple containers like /xxx:xxx/schold:pattern to allow better includes --> - <xsl:template match="schold:include" mode="dsdl:go"> - <xsl:variable name="document-uri" - select="substring-before(concat(@href,'#'), '#')" /> - <xsl:variable name="fragment-id" - select="substring-after(@href, '#')" /> - - <xsl:processing-instruction name="DSDL_INCLUDE_START"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - - <xsl:choose> - <xsl:when test="not( $include-schematron = 'true' )"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xsl:when> - <xsl:otherwise> - <xsl:choose> - - <xsl:when - test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> - <xsl:message> - Error: Impossible URL in Schematron include - </xsl:message> - </xsl:when> - - <!-- this case is when there is in embedded schema in the same document elsewhere --> - <xslt:when - test="string-length( $document-uri ) = 0"> - <xslt:apply-templates mode="dsdl:go" + <xsl:when + test=" $theFragment_1/self::iso:schema "> + <xsl:message> + Schema error: Use include to + include fragments, not a whole + schema + </xsl:message> + </xsl:when> + + <!-- case 3 --> + <xsl:otherwise> + <xsl:apply-templates + select=" $theFragment_1[1]" mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + </xsl:for-each> + </xsl:when> + + <!-- Case where there is no ID so we include the whole document --> + <!-- Experimental addition: include fragments of children --> + <xsl:otherwise> + <xsl:variable name="theDocument_2" + select="document( $document-uri,/ )" /> + <xsl:variable name="theFragment_2" + select="$theDocument_2/iso:*" /> + <xsl:variable name="theContainedFragments" + select="$theDocument_2/*/iso:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" /> + <xsl:if test="not($theDocument_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + + <!-- There are three cases for includes: + 0) No text specified- error! + + 1) REMOVED + + 2) The linked-to element is sch:schema however the parent of the include + is not a schema. In this case, it is an error. (Actually, it should + be an error for other kinds of containment problems, but we won't + check for them in this version.) + + 3) Otherwise, include the pointed-to element + --> + <xsl:choose> + <!-- case 0 --> + <xsl:when + test="not($theFragment_2) and not ($theContainedFragments)"> + <xsl:message terminate="no"> + <xsl:text>Unable to locate id attribute: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:when> + + <!-- case 1 removed --> + + <!-- case 2 --> + <xsl:when + test=" $theFragment_2/self::iso:schema or $theContainedFragments/self::iso:schema"> + <xsl:message> + Schema error: Use include to include + fragments, not a whole schema + </xsl:message> + </xsl:when> + + <!-- If this were XLST 2, we could use + if ($theFragment) then $theFragment else $theContainedFragments + here (thanks to KN) + --> + <!-- case 3 --> + <xsl:otherwise> + <xsl:apply-templates + select="$theFragment_2 " mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + </xsl:otherwise> + </xsl:choose> + </xsl:otherwise> + </xsl:choose> + + <xsl:processing-instruction name="DSDL_INCLUDE_END"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + </xsl:template> + + + <!-- WARNING sch:extends[@href] is experimental and non standard --> + <!-- Basically, it adds the children of the selected element, not the element itself. --> + <xsl:template match="iso:extends[@href]" mode="dsdl:go"> + + <xsl:variable name="document-uri" + select="substring-before(concat(@href,'#'), '#')" /> + <xsl:variable name="fragment-id" + select="substring-after(@href, '#')" /> + + + <xsl:processing-instruction name="DSDL_INCLUDE_START"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + + <xsl:choose> + <xsl:when test="not( $include-schematron = 'true' )"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xsl:when> + <xsl:otherwise> + + <xsl:choose> + + <xsl:when + test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> + <xsl:message> + Error: Impossible URL in Schematron include + </xsl:message> + </xsl:when> + + <!-- this case is when there is in embedded schema in the same document elsewhere --> + <xslt:when + test="string-length( $document-uri ) = 0"> + <xslt:apply-templates mode="dsdl:go" + select="//iso:*[@xml:id= $fragment-id ]/* + |id( $fragment-id)/* + | //iso:*[@id= $fragment-id ]/*" /> + </xslt:when> + + <!-- case where there is a fragment in another document (should be an iso: element) --> + <!-- There are three cases for includes with fragment: + 0) No href file or no matching id - error! + 1) REMOVED + + 2) REMOVED + + 3) Otherwise, include the pointed-to element + --> + + <xsl:when + test="string-length( $fragment-id ) > 0"> + <xsl:variable name="theDocument_1" + select="document( $document-uri,/ )" /> + <xsl:variable name="originalParent" select=".." /> + + <!-- case 0 --> + <xsl:if test="not($theDocument_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <!-- use for-each to rebase id() to external document --> + <xsl:for-each select="$theDocument_1"> + <xsl:variable name="theFragment_1" + select=" $theDocument_1//iso:*[@xml:id= $fragment-id ] | + id($fragment-id) | + $theDocument_1//iso:*[@id= $fragment-id ]" /> + + + <xsl:choose> + <!-- case 0 --> + <xsl:when test="not($theFragment_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to locate id attribute: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:when> + + + <!-- case 1 REMOVED --> + + <!-- case 2 REMOVED --> + + + <!-- case 3 --> + <xsl:otherwise> + + <xsl:apply-templates + select=" $theFragment_1[1]/*" mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + </xsl:for-each> + </xsl:when> + + <!-- Case where there is no ID so we include the whole document --> + <!-- Experimental addition: include fragments of children --> + <xsl:otherwise> + <xsl:variable name="theDocument_2" + select="document( $document-uri,/ )" /> + <xsl:variable name="theFragment_2" + select="$theDocument_2/iso:*" /> + <xsl:variable name="theContainedFragments" + select="$theDocument_2/*/iso:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" /> + <xsl:if test="not($theDocument_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + + <!-- There are three cases for includes: + 0) No text specified- error! + + 1) REMOVED + + 2) REMOVED + + 3) Otherwise, include the pointed-to element + --> + <xsl:choose> + <!-- case 0 --> + <xsl:when + test="not($theFragment_2) and not ($theContainedFragments)"> + <xsl:message terminate="no"> + <xsl:text>Unable to locate id attribute: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:when> + + <!-- case 1 removed --> + + <!-- case 2 removed --> + + <!-- If this were XLST 2, we could use + if ($theFragment) then $theFragment else $theContainedFragments + here (thanks to KN) + --> + <!-- case 3 --> + <xsl:otherwise> + <xsl:apply-templates + select="$theFragment_2/* " mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + </xsl:otherwise> + </xsl:choose> + </xsl:otherwise> + </xsl:choose> + + <xsl:processing-instruction name="DSDL_INCLUDE_END"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + </xsl:template> + + + + <!-- =========================================================== --> + <!-- Handle Schematron 1.6 inclusions: clone of ISO code above --> + <!-- =========================================================== --> + + + <!-- Extend the URI syntax to allow # references --> + <!-- Add experimental support for simple containers like /xxx:xxx/schold:pattern to allow better includes --> + <xsl:template match="schold:include" mode="dsdl:go"> + <xsl:variable name="document-uri" + select="substring-before(concat(@href,'#'), '#')" /> + <xsl:variable name="fragment-id" + select="substring-after(@href, '#')" /> + + <xsl:processing-instruction name="DSDL_INCLUDE_START"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + + <xsl:choose> + <xsl:when test="not( $include-schematron = 'true' )"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xsl:when> + <xsl:otherwise> + <xsl:choose> + + <xsl:when + test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> + <xsl:message> + Error: Impossible URL in Schematron include + </xsl:message> + </xsl:when> + + <!-- this case is when there is in embedded schema in the same document elsewhere --> + <xslt:when + test="string-length( $document-uri ) = 0"> + <xslt:apply-templates mode="dsdl:go" select="//schold:*[@xml:id= $fragment-id ] |id( $fragment-id) | //schold:*[@id= $fragment-id ]" /> </xslt:when> <!-- case where there is a fragment in another document (should be an iso: element) --> - <xsl:when - test="string-length( $fragment-id ) > 0"> - <xsl:variable name="theDocument_1" - select="document( $document-uri,/ )" /> - <xsl:if test="not($theDocument_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <!-- use for-each to rebase id() to $theDocument --> - <xsl:for-each select="$theDocument_1"> - <xsl:variable name="theFragment_1" + <xsl:when + test="string-length( $fragment-id ) > 0"> + <xsl:variable name="theDocument_1" + select="document( $document-uri,/ )" /> + <xsl:if test="not($theDocument_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <!-- use for-each to rebase id() to $theDocument --> + <xsl:for-each select="$theDocument_1"> + <xsl:variable name="theFragment_1" select=" $theDocument_1//schold:*[@xml:id= $fragment-id ] | id($fragment-id) | $theDocument_1//schold:*[@id= $fragment-id ]" /> - <xsl:if - test=" $theFragment_1/self::schold:schema "> - <xsl:message> - Schema error: Use include to include - fragments, not a whole schema - </xsl:message> - </xsl:if> - <xsl:if test="not($theFragment_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <xsl:apply-templates - select=" $theFragment_1[1]" mode="dsdl:go" /> - </xsl:for-each> - </xsl:when> - - <!-- Case where there is no ID so we include the whole document --> - <!-- Experimental addition: include fragments of children --> - <xsl:otherwise> - <xsl:variable name="theDocument_2" - select="document( $document-uri,/ )" /> - <xsl:variable name="theFragment_2" - select="$theDocument_2/iso:*" /> - <xsl:variable name="theContainedFragments" - select="$theDocument_2/*/schold:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" /> - <xsl:if test="not($theDocument_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - - <xsl:if - test=" $theFragment_2/self::schold:schema or $theContainedFragments/self::schold:schema"> - <xsl:message> - Schema error: Use include to include - fragments, not a whole schema - </xsl:message> - </xsl:if> - <xsl:if - test="not($theFragment_2) and not ($theContainedFragments)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <!-- If this were XLST 2, we could use - if ($theFragment) then $theFragment else $theContainedFragments - here (thanks to KN) - --> - <xsl:choose> - <xsl:when test=" $theFragment_2 "> - <xsl:apply-templates - select="$theFragment_2 " mode="dsdl:go" /> - </xsl:when> - <xsl:otherwise> - <!-- WARNING! EXPERIMENTAL! Use at your own risk. This may be discontinued! --> - <xsl:apply-templates - select=" $theContainedFragments " mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - </xsl:otherwise> - </xsl:choose> - - </xsl:otherwise> - </xsl:choose> - - <xsl:processing-instruction name="DSDL_INCLUDE_END"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - </xsl:template> - <!-- =========================================================== --> - <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> - <!-- Part 5 - DataType Library Language - DTLL --> - <!-- Committee Draft Experimental support only --> - <!-- The <include> element may well be replaced by XInclude in --> - <!-- any final version. --> - <!-- =========================================================== --> - <xslt:template match="dtll:include" mode="dsdl:go"> - <!-- Insert subschema --> - - <xsl:variable name="document-uri" - select="substring-before(concat(@href,'#'), '#')" /> - <xsl:variable name="fragment-id" - select="substring-after(@href, '#')" /> - <xsl:processing-instruction name="DSDL_INCLUDE_START"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - <xsl:choose> - <xsl:when test="not( $include-dtll = 'true' )"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xsl:when> - <xsl:otherwise> - <xsl:choose> - - <xsl:when - test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> - <xsl:message> - Error: Impossible URL in DTLL include - </xsl:message> - </xsl:when> - - <!-- this case is when there is in embedded schema in the same document elsewhere --> - <xslt:when - test="string-length( $document-uri ) = 0"> - <xslt:apply-templates mode="dsdl:go" + <xsl:if + test=" $theFragment_1/self::schold:schema "> + <xsl:message> + Schema error: Use include to include + fragments, not a whole schema + </xsl:message> + </xsl:if> + <xsl:if test="not($theFragment_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to locate id attribute: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <xsl:apply-templates + select=" $theFragment_1[1]" mode="dsdl:go" /> + </xsl:for-each> + </xsl:when> + + <!-- Case where there is no ID so we include the whole document --> + <!-- Experimental addition: include fragments of children --> + <xsl:otherwise> + <xsl:variable name="theDocument_2" + select="document( $document-uri,/ )" /> + <xsl:variable name="theFragment_2" + select="$theDocument_2/iso:*" /> + <xsl:variable name="theContainedFragments" + select="$theDocument_2/*/schold:* | $theDocument_2/*/xsl:* | $theDocument_2/*/xhtml:*" /> + <xsl:if test="not($theDocument_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + + <xsl:if + test=" $theFragment_2/self::schold:schema or $theContainedFragments/self::schold:schema"> + <xsl:message> + Schema error: Use include to include + fragments, not a whole schema + </xsl:message> + </xsl:if> + <xsl:if + test="not($theFragment_2) and not ($theContainedFragments)"> + <xsl:message terminate="no"> + <xsl:text>Unable to locate id attribute: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <!-- If this were XLST 2, we could use + if ($theFragment) then $theFragment else $theContainedFragments + here (thanks to KN) + --> + <xsl:choose> + <xsl:when test=" $theFragment_2 "> + <xsl:apply-templates + select="$theFragment_2 " mode="dsdl:go" /> + </xsl:when> + <xsl:otherwise> + <!-- WARNING! EXPERIMENTAL! Use at your own risk. This may be discontinued! --> + <xsl:apply-templates + select=" $theContainedFragments " mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + </xsl:otherwise> + </xsl:choose> + + </xsl:otherwise> + </xsl:choose> + + <xsl:processing-instruction name="DSDL_INCLUDE_END"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + </xsl:template> + <!-- =========================================================== --> + <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> + <!-- Part 5 - DataType Library Language - DTLL --> + <!-- Committee Draft Experimental support only --> + <!-- The <include> element may well be replaced by XInclude in --> + <!-- any final version. --> + <!-- =========================================================== --> + <xslt:template match="dtll:include" mode="dsdl:go"> + <!-- Insert subschema --> + + <xsl:variable name="document-uri" + select="substring-before(concat(@href,'#'), '#')" /> + <xsl:variable name="fragment-id" + select="substring-after(@href, '#')" /> + <xsl:processing-instruction name="DSDL_INCLUDE_START"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + <xsl:choose> + <xsl:when test="not( $include-dtll = 'true' )"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xsl:when> + <xsl:otherwise> + <xsl:choose> + + <xsl:when + test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> + <xsl:message> + Error: Impossible URL in DTLL include + </xsl:message> + </xsl:when> + + <!-- this case is when there is in embedded schema in the same document elsewhere --> + <xslt:when + test="string-length( $document-uri ) = 0"> + <xslt:apply-templates mode="dsdl:go" select="//*[@xml:id= $fragment-id ] | id( $fragment-id) | //*[@id= $fragment-id ]" /> </xslt:when> - <xsl:when - test="string-length( $fragment-id ) > 0"> - <xsl:variable name="theDocument_1" - select="document( $document-uri,/ )" /> - <xsl:if test="not($theDocument_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <!-- use for-each to rebase id() to $theDocument --> - <xsl:for-each select="$theDocument_1"> - <xsl:variable name="theFragment_1" + <xsl:when + test="string-length( $fragment-id ) > 0"> + <xsl:variable name="theDocument_1" + select="document( $document-uri,/ )" /> + <xsl:if test="not($theDocument_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <!-- use for-each to rebase id() to $theDocument --> + <xsl:for-each select="$theDocument_1"> + <xsl:variable name="theFragment_1" select="$theDocument_1//*[@xml:id= $fragment-id ] | id( $fragment-id ) | $theDocument_1//*[@id= $fragment-id ]" /> @@ -865,96 +890,96 @@ <xsl:value-of select="@href" /> </xsl:message> </xsl:if> - <xsl:apply-templates - select=" $theFragment_1[1]" mode="dsdl:go" /> - </xsl:for-each> - </xsl:when> - - <xsl:otherwise> - <xsl:variable name="theDocument_2" - select="document( $document-uri,/ )" /> - <xsl:variable name="theFragment_2" - select="$theDocument_2/*" /> - - <xsl:if test="not($theDocument_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - - <xsl:if test="not($theFragment_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <xsl:apply-templates select="$theFragment_2 " - mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - - </xsl:otherwise> - </xsl:choose> - <xsl:processing-instruction name="DSDL_INCLUDE_END"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - </xslt:template> - - <!-- =========================================================== --> - <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> - <!-- Part 7 - Character Repertoire Description Language - CRDL --> - <!-- Final Committee Draft 2008-01-11 Experimental support only --> - <!-- =========================================================== --> - <xslt:template match="crdl:ref" mode="dsdl:go"> - <!-- Insert subschema --> - - <xsl:variable name="document-uri" - select="substring-before(concat(@href,'#'), '#')" /> - <xsl:variable name="fragment-id" - select="substring-after(@href, '#')" /> - <xsl:processing-instruction name="DSDL_INCLUDE_START"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - <xsl:choose> - <xsl:when test="not( $include-crdl = 'true' )"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xsl:when> - <xsl:otherwise> - <xsl:choose> - - <xsl:when - test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> - <xsl:message> - Error: Impossible URL in CRDL include - </xsl:message> - </xsl:when> - - <!-- this case is when there is in embedded schema in the same document elsewhere --> - <xslt:when - test="string-length( $document-uri ) = 0"> - - <xslt:apply-templates mode="dsdl:go" + <xsl:apply-templates + select=" $theFragment_1[1]" mode="dsdl:go" /> + </xsl:for-each> + </xsl:when> + + <xsl:otherwise> + <xsl:variable name="theDocument_2" + select="document( $document-uri,/ )" /> + <xsl:variable name="theFragment_2" + select="$theDocument_2/*" /> + + <xsl:if test="not($theDocument_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + + <xsl:if test="not($theFragment_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to locate id attribute: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <xsl:apply-templates select="$theFragment_2 " + mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + + </xsl:otherwise> + </xsl:choose> + <xsl:processing-instruction name="DSDL_INCLUDE_END"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + </xslt:template> + + <!-- =========================================================== --> + <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> + <!-- Part 7 - Character Repertoire Description Language - CRDL --> + <!-- Final Committee Draft 2008-01-11 Experimental support only --> + <!-- =========================================================== --> + <xslt:template match="crdl:ref" mode="dsdl:go"> + <!-- Insert subschema --> + + <xsl:variable name="document-uri" + select="substring-before(concat(@href,'#'), '#')" /> + <xsl:variable name="fragment-id" + select="substring-after(@href, '#')" /> + <xsl:processing-instruction name="DSDL_INCLUDE_START"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + <xsl:choose> + <xsl:when test="not( $include-crdl = 'true' )"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xsl:when> + <xsl:otherwise> + <xsl:choose> + + <xsl:when + test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> + <xsl:message> + Error: Impossible URL in CRDL include + </xsl:message> + </xsl:when> + + <!-- this case is when there is in embedded schema in the same document elsewhere --> + <xslt:when + test="string-length( $document-uri ) = 0"> + + <xslt:apply-templates mode="dsdl:go" select="//*[@xml:id= $fragment-id ] | id( $fragment-id) | //*[@id= $fragment-id ]" /> </xslt:when> - <xsl:when - test="string-length( $fragment-id ) > 0"> - <xsl:variable name="theDocument_1" - select="document( $document-uri,/ )" /> - <xsl:if test="not($theDocument_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <!-- use for-each to rebase id() to $theDocument --> - <xsl:for-each select="$theDocument_1"> - <xsl:variable name="theFragment_1" + <xsl:when + test="string-length( $fragment-id ) > 0"> + <xsl:variable name="theDocument_1" + select="document( $document-uri,/ )" /> + <xsl:if test="not($theDocument_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <!-- use for-each to rebase id() to $theDocument --> + <xsl:for-each select="$theDocument_1"> + <xsl:variable name="theFragment_1" select="$theDocument_1//*[@xml:id= $fragment-id ] | id( $fragment-id ) | $theDocument_1//*[@id= $fragment-id ]" /> @@ -965,239 +990,239 @@ <xsl:value-of select="@href" /> </xsl:message> </xsl:if> - <xsl:apply-templates select=" $theFragment_1 " - mode="dsdl:go" /> - </xsl:for-each> - </xsl:when> - - <xsl:otherwise> - <xsl:variable name="theDocument_2" - select="document( $document-uri,/ )" /> - <xsl:variable name="theFragment_2" - select="$theDocument_2/*" /> - - <xsl:if test="not($theDocument_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - <xsl:if test="not($theFragment_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - - <xsl:apply-templates select="$theFragment_2" - mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - - </xsl:otherwise> - </xsl:choose> - <xsl:processing-instruction name="DSDL_INCLUDE_END"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - </xslt:template> - - - <!-- =========================================================== --> - <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> - <!-- Part 4 - Namespace-based Validation Dispatching Language - NVDL --> - <!-- Note: This does not include schemas referenced for --> - <!-- validation, it merely handles any simple XIncludes --> - <!-- =========================================================== --> - <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> - <!-- Part 8 - Document Schema Renaming Language - DSRL --> - <!-- Note: Final? Committee Draft Experimental support only --> - <!-- =========================================================== --> - <!-- XInclude support for id based references only, with 1 level --> - <!-- of fallback. --> - <!-- =========================================================== --> - - <xslt:template mode="dsdl:go" - match="xi:include[@href][not(@parseType) or @parseType ='xml']"> - <!-- Simple inclusions only here --> - <xsl:processing-instruction name="DSDL_INCLUDE_START"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - <xsl:choose> - <xsl:when test="not( $include-xinclude = 'true' )"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xsl:when> - <xsl:otherwise> - <xsl:choose> - - <xsl:when test="contains( @href, '#')"> - <xsl:message terminate="yes"> - Fatal error: Xinclude href contains fragment - identifier # - </xsl:message> - </xsl:when> - - - <xsl:when test="contains( @xpointer, '(')"> - <xsl:message terminate="yes"> - Fatal error: Sorry, this software only - supports simple ids in XInclude xpointers - </xsl:message> - </xsl:when> - - <xsl:when - test="string-length( @href ) = 0 and string-length( @xpointer ) = 0"> - - <xsl:message terminate="yes"> - Fatal Error: Impossible URL in XInclude - include - </xsl:message> - </xsl:when> - - <!-- this case is when there is in embedded schema in the same document elsewhere --> - <xslt:when test="string-length( @href ) = 0"> - - <xslt:apply-templates mode="dsdl:go" + <xsl:apply-templates select=" $theFragment_1 " + mode="dsdl:go" /> + </xsl:for-each> + </xsl:when> + + <xsl:otherwise> + <xsl:variable name="theDocument_2" + select="document( $document-uri,/ )" /> + <xsl:variable name="theFragment_2" + select="$theDocument_2/*" /> + + <xsl:if test="not($theDocument_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + <xsl:if test="not($theFragment_2)"> + <xsl:message terminate="no"> + <xsl:text>Unable to locate id attribute: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + + <xsl:apply-templates select="$theFragment_2" + mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + + </xsl:otherwise> + </xsl:choose> + <xsl:processing-instruction name="DSDL_INCLUDE_END"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + </xslt:template> + + + <!-- =========================================================== --> + <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> + <!-- Part 4 - Namespace-based Validation Dispatching Language - NVDL --> + <!-- Note: This does not include schemas referenced for --> + <!-- validation, it merely handles any simple XIncludes --> + <!-- =========================================================== --> + <!-- ISO/IEC 19757 - DSDL Document Schema Definition Languages --> + <!-- Part 8 - Document Schema Renaming Language - DSRL --> + <!-- Note: Final? Committee Draft Experimental support only --> + <!-- =========================================================== --> + <!-- XInclude support for id based references only, with 1 level --> + <!-- of fallback. --> + <!-- =========================================================== --> + + <xslt:template mode="dsdl:go" + match="xi:include[@href][not(@parseType) or @parseType ='xml']"> + <!-- Simple inclusions only here --> + <xsl:processing-instruction name="DSDL_INCLUDE_START"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + <xsl:choose> + <xsl:when test="not( $include-xinclude = 'true' )"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xsl:when> + <xsl:otherwise> + <xsl:choose> + + <xsl:when test="contains( @href, '#')"> + <xsl:message terminate="yes"> + Fatal error: Xinclude href contains fragment + identifier # + </xsl:message> + </xsl:when> + + + <xsl:when test="contains( @xpointer, '(')"> + <xsl:message terminate="yes"> + Fatal error: Sorry, this software only + supports simple ids in XInclude xpointers + </xsl:message> + </xsl:when> + + <xsl:when + test="string-length( @href ) = 0 and string-length( @xpointer ) = 0"> + + <xsl:message terminate="yes"> + Fatal Error: Impossible URL in XInclude + include + </xsl:message> + </xsl:when> + + <!-- this case is when there is in embedded schema in the same document elsewhere --> + <xslt:when test="string-length( @href ) = 0"> + + <xslt:apply-templates mode="dsdl:go" select="//*[@xml:id= current()/@xpointer ] | id( @xpointer) | //*[@id= current()/@xpointer ]" /> </xslt:when> - <xsl:when - test="string-length( @xpointer ) > 0"> - <xsl:variable name="theDocument_1" - select="document( @href,/ )" /> - <xsl:variable name="theFragment_1" + <xsl:when + test="string-length( @xpointer ) > 0"> + <xsl:variable name="theDocument_1" + select="document( @href,/ )" /> + <xsl:variable name="theFragment_1" select="$theDocument_1//*[@xml:id= current()/@xpointer ] | $theDocument_1//*[@id= current()/@xpointer ]" /> - <!-- removed - | $theDocument_1/id( @xpointer) - because it requires rebasing in XSLT1 and that would mess up the use of current() - --> - - - <!-- Allow one level of fallback, to another XInclude --> - <xsl:if test="not($theDocument_1)"> - <xsl:choose> - <xsl:when test="xi:fallback"> - <xsl:variable name="theDocument_2" + <!-- removed + | $theDocument_1/id( @xpointer) + because it requires rebasing in XSLT1 and that would mess up the use of current() + --> + + + <!-- Allow one level of fallback, to another XInclude --> + <xsl:if test="not($theDocument_1)"> + <xsl:choose> + <xsl:when test="xi:fallback"> + <xsl:variable name="theDocument_2" select="document( xi:fallback[1]/xi:include[not(@parseType) or @parseType='xml']/@href,/ )" /> - <xsl:variable name="theFragment_2" + <xsl:variable name="theFragment_2" select="$theDocument_2//*[@xml:id= current()/xi:fallback[1]/xi:include/@xpointer ] | $theDocument_2//*[@id= current()/xi:fallback[1]/xi:include/@xpointer ]" /> - <!-- removed - | $theDocument_2/id( xi:fallback[1]/xi:include/@xpointer) - because it id() would need rebasing in XSLT1 and that would mess up use of current() - --> - - <xsl:if - test="not($theDocument_2)"> - - <xsl:message terminate="no"> + <!-- removed + | $theDocument_2/id( xi:fallback[1]/xi:include/@xpointer) + because it id() would need rebasing in XSLT1 and that would mess up use of current() + --> + + <xsl:if + test="not($theDocument_2)"> + + <xsl:message terminate="no"> <xsl:text>Unable to open referenced included file and fallback file: </xsl:text> - <xsl:value-of - select="@href" /> - </xsl:message> - </xsl:if> - </xsl:when> - <xsl:otherwise> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:otherwise> - </xsl:choose> - </xsl:if> - <xsl:apply-templates select=" $theFragment_1" - mode="dsdl:go" /> - </xsl:when> - - <!-- Document but no fragment specified --> - <xsl:otherwise> - <xsl:variable name="theDocument_3" - select="document( @href,/ )" /> - <xsl:variable name="theFragment_3" - select="$theDocument_3/*" /> - - <xsl:if test="not($theDocument_3)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@href" /> - </xsl:message> - </xsl:if> - - <xsl:apply-templates select="$theFragment_3 " - mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - - </xsl:otherwise> - </xsl:choose> - <xsl:processing-instruction name="DSDL_INCLUDE_END"> - <xsl:value-of select="@href" /> - </xsl:processing-instruction> - </xslt:template> - - <!-- =========================================================== --> - <!-- W3C XLink 1.1 embedded simple links --> - <!-- =========================================================== --> - <xslt:template + <xsl:value-of + select="@href" /> + </xsl:message> + </xsl:if> + </xsl:when> + <xsl:otherwise> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:otherwise> + </xsl:choose> + </xsl:if> + <xsl:apply-templates select=" $theFragment_1" + mode="dsdl:go" /> + </xsl:when> + + <!-- Document but no fragment specified --> + <xsl:otherwise> + <xsl:variable name="theDocument_3" + select="document( @href,/ )" /> + <xsl:variable name="theFragment_3" + select="$theDocument_3/*" /> + + <xsl:if test="not($theDocument_3)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@href" /> + </xsl:message> + </xsl:if> + + <xsl:apply-templates select="$theFragment_3 " + mode="dsdl:go" /> + </xsl:otherwise> + </xsl:choose> + + </xsl:otherwise> + </xsl:choose> + <xsl:processing-instruction name="DSDL_INCLUDE_END"> + <xsl:value-of select="@href" /> + </xsl:processing-instruction> + </xslt:template> + + <!-- =========================================================== --> + <!-- W3C XLink 1.1 embedded simple links --> + <!-- =========================================================== --> + <xslt:template match="*[@xlink:href][not(parent::*[@xlink:type='complex'])] [not(@xlink:type) or (@xlink:type='simple')] [@xlink:show='embed'] - [not(@xlink:actuate) or (@xlink:actuate='onLoad')]" - mode="dsdl:go" priority="1"> - - <xsl:variable name="document-uri" - select="substring-before(concat(@xlink:href,'#'), '#')" /> - <xsl:variable name="fragment-id" - select="substring-after(@xlink:href, '#')" /> - <xsl:processing-instruction name="DSDL_INCLUDE_START"> - <xsl:value-of select="@xlink:href" /> - </xsl:processing-instruction> - <xsl:choose> - <xsl:when test="not( $include-xlink = 'true' )"> - <xslt:copy> - <xslt:copy-of select="@*" /> - <xslt:apply-templates mode="dsdl:go" /> - </xslt:copy> - </xsl:when> - <xsl:otherwise> - <xsl:choose> - - <xsl:when - test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> - <xsl:message> - Error: Impossible URL in XLink embedding - link - </xsl:message> - </xsl:when> - - <!-- this case is when there is in embedded schema in the same document elsewhere --> - <xslt:when - test="string-length( $document-uri ) = 0"> - <xslt:apply-templates mode="dsdl:go" + [not(@xlink:actuate) or (@xlink:actuate='onLoad')]" + mode="dsdl:go" priority="1"> + + <xsl:variable name="document-uri" + select="substring-before(concat(@xlink:href,'#'), '#')" /> + <xsl:variable name="fragment-id" + select="substring-after(@xlink:href, '#')" /> + <xsl:processing-instruction name="DSDL_INCLUDE_START"> + <xsl:value-of select="@xlink:href" /> + </xsl:processing-instruction> + <xsl:choose> + <xsl:when test="not( $include-xlink = 'true' )"> + <xslt:copy> + <xslt:copy-of select="@*" /> + <xslt:apply-templates mode="dsdl:go" /> + </xslt:copy> + </xsl:when> + <xsl:otherwise> + <xsl:choose> + + <xsl:when + test="string-length( $document-uri ) = 0 and string-length( $fragment-id ) = 0"> + <xsl:message> + Error: Impossible URL in XLink embedding + link + </xsl:message> + </xsl:when> + + <!-- this case is when there is in embedded schema in the same document elsewhere --> + <xslt:when + test="string-length( $document-uri ) = 0"> + <xslt:apply-templates mode="dsdl:go" select="//*[@xml:id= $fragment-id ] | id( $fragment-id) | //*[@id= $fragment-id ]" /> </xslt:when> - <xsl:when - test="string-length( $fragment-id ) > 0"> - <xsl:variable name="theDocument_1" - select="document( $document-uri,/ )" /> - <xsl:if test="not($theDocument_1)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@xlink:href" /> - </xsl:message> - </xsl:if> - <!-- use for-each to rebase id() to $theDocument --> - <xsl:for-each select="$theDocument_1"> - <xsl:variable name="theFragment_1" + <xsl:when + test="string-length( $fragment-id ) > 0"> + <xsl:variable name="theDocument_1" + select="document( $document-uri,/ )" /> + <xsl:if test="not($theDocument_1)"> + <xsl:message terminate="no"> + <xsl:text>Unable to open referenced included file: </xsl:text> + <xsl:value-of select="@xlink:href" /> + </xsl:message> + </xsl:if> + <!-- use for-each to rebase id() to $theDocument --> + <xsl:for-each select="$theDocument_1"> + <xsl:variable name="theFragment_1" select="$theDocument_1//*[@xml:id= $fragment-id ] | id( $fragment-id ) | $theDocument_1//*[@id= $fragment-id ]" /> @@ -1207,302 +1232,303 @@ <xsl:value-of select="@xlink:href" /> </xsl:message> </xsl:if> - <xsl:apply-templates - select=" $theFragment_1[1]" mode="dsdl:go" /> - </xsl:for-each> - </xsl:when> - - <xsl:otherwise> - <xsl:variable name="theDocument_2" - select="document( $document-uri,/ )" /> - <xsl:variable name="theFragment_2" - select="$theDocument_2/*" /> - - <xsl:if test="not($theDocument_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to open referenced included file: </xsl:text> - <xsl:value-of select="@xlink:href" /> - </xsl:message> - </xsl:if> - - <xsl:if test="not($theFragment_2)"> - <xsl:message terminate="no"> - <xsl:text>Unable to locate id attribute: </xsl:text> - <xsl:value-of select="@xlink:href" /> - </xsl:message> - </xsl:if> - <xsl:apply-templates select="$theFragment_2 " - mode="dsdl:go" /> - </xsl:otherwise> - </xsl:choose> - - </xsl:otherwise> - </xsl:choose> - - <xsl:processing-instruction name="DSDL_INCLUDE_END"> - <xsl:value-of select="@xlink:href" /> - </xsl:processing-instruction> - </xslt:template> - -<!-- ================================================================= --> -<!-- UTILITY TEMPLATES --> -<!-- ================================================================= --> - -<!-- MESSAGE WHEN XPATH NOT WELL FORMED --> - -<xsl:template name="sch-check:xpath-wf-message" > - <xsl:param name="string" /> - <xsl:param name="subject" /> - <xsl:variable name="xpath-wf-result"> - <xsl:call-template name="sch-check:xpath-wf"> - <xsl:with-param name="string" select=" $string " /> - </xsl:call-template> - </xsl:variable> - - <xsl:if test="string-length($xpath-wf-result) > 0"> - <xsl:message><xsl:value-of select="$subject"/><xsl:value-of select="$xpath-wf-result" /></xsl:message> - </xsl:if> - </xsl:template> - -<!-- XPATH WELL FORMED --> - -<xsl:template name="sch-check:xpath-wf" > - <xsl:param name="string" /> - <!-- This does some minimal checks to see if a string is well-formed XPath. - It checks - 1) String is not empty, - 2) equal number of open and close parens - 3) equal number of left and right square brackets - It does not check balancing. It does not check inside string literals in XPaths. - - If there is no error, empty content is returned. If there is an error, it is given - as an error message. This is not localized yet. - --> - - - <xsl:variable name="stripped-contents"> - <xsl:call-template name="sch-check:strip-strings" > - <xsl:with-param name="string" select=" $string " /> - <xsl:with-param name="mode" select=" 0" /> - </xsl:call-template> - </xsl:variable> - - - <xsl:variable name="paren-result"> - <xsl:call-template name="sch-check:test-paren" > - <xsl:with-param name="string" select="$stripped-contents" /> - <xsl:with-param name="count" select=" 0" /> - </xsl:call-template> - </xsl:variable> - - - <xsl:variable name="sqb-result"> - <xsl:call-template name="sch-check:test-sqb" > - <xsl:with-param name="string" select="$stripped-contents" /> - <xsl:with-param name="count" select=" 0" /> - </xsl:call-template> - </xsl:variable> - - - <xsl:choose> - <xsl:when test="string-length( normalize-space($string)) = 0" - >XPath error. No XPath.</xsl:when> - <xsl:when test="contains( $stripped-contents, '/[' )" - >XPath error. Missing location step. Suggestion: remove '/' before '['. - <xsl:value-of select=" normalize-space($string)"/></xsl:when> - <!-- not implemented yet - <xsl:when test=" count () mod 2 = 1" - >XPath syntax error. Odd number of apostrophe characters. Suggestion: check string termination and delimiting. - <xsl:value-of select=" normalize-space($string)"/></xsl:when> - <xsl:when test=" count ( ) mod 2 = 1" - >XPath syntax error. Odd number of quote characters. Suggestion: check string termination and delimiting. - <xsl:value-of select=" normalize-space($string)"/></xsl:when> - --> - <xsl:when test=" $paren-result > 0 " - >XPath syntax error. Unclosed parenthesis. Suggestion: add ')'. - <xsl:value-of select=" normalize-space($string)"/></xsl:when> - <xsl:when test=" $paren-result < 0 " - >XPath syntax error. Extra close parenthesis. Suggestion: remove ')'. - <xsl:value-of select=" normalize-space($string)"/></xsl:when> - - <xsl:when test=" $sqb-result > 0 " - >XPath syntax error. Unclosed left square bracket. Suggestion: add ']'. - <xsl:value-of select=" normalize-space($string)"/></xsl:when> - <xsl:when test=" $sqb-result < 0 " - >XPath syntax error. Extra right square bracket. Suggestion: remove ']'. - <xsl:value-of select=" normalize-space($string)"/></xsl:when> - - </xsl:choose> - - - -</xsl:template> - - -<!-- STRIP XPATH STRINGS --> -<xsl:template name="sch-check:strip-strings"> - <xsl:param name="string" /> - <xsl:param name="mode" /> - - <!-- - mode 0 = outside string - mode 1 = in double quote string - mode 2 = in single quote string - --> - <xsl:choose> - <xsl:when test=" string-length( $string) = 0" /> - <xsl:when test="$mode = 1 "> - <xsl:choose> - - - <xsl:when test="starts-with( $string, '""') " > - - <xsl:call-template name="sch-check:strip-strings"> - <xsl:with-param name="string" select=" substring ( $string, 3 )"/> - <xsl:with-param name="mode" select=" $mode" /> - </xsl:call-template> - </xsl:when> - <xsl:when test="starts-with( $string, '"') " > - <xsl:call-template name="sch-check:strip-strings
<TRUNCATED>
