bananaaggle commented on a change in pull request #11240: URL: https://github.com/apache/druid/pull/11240#discussion_r659421961
########## File path: docs/development/extensions-contrib/rocketmq-ingestion.md ########## @@ -0,0 +1,414 @@ +--- +id: rocketmq-ingestion +title: "Apache RocketMQ ingestion" +sidebar_label: "Apache RocketMQ" +--- + +<!-- + ~ Licensed to the Apache Software Foundation (ASF) under one + ~ or more contributor license agreements. See the NOTICE file + ~ distributed with this work for additional information + ~ regarding copyright ownership. The ASF licenses this file + ~ to you under the Apache License, Version 2.0 (the + ~ "License"); you may not use this file except in compliance + ~ with the License. You may obtain a copy of the License at + ~ + ~ http://www.apache.org/licenses/LICENSE-2.0 + ~ + ~ Unless required by applicable law or agreed to in writing, + ~ software distributed under the License is distributed on an + ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + ~ KIND, either express or implied. See the License for the + ~ specific language governing permissions and limitations + ~ under the License. + --> + + +The `RocketMQ` indexing service enables the configuration of *supervisors* on the Overlord, which facilitate ingestion from +`RocketMQ` by managing the creation and lifetime of `RocketMQ` indexing tasks. These indexing tasks read events using `RocketMQ's` own +message queue and offset mechanism and are therefore able to provide guarantees of exactly-once ingestion. Message queue is defined unique by +broker name and `queueID`, and message is in ordered stored in one message queue. +The supervisor oversees the state of the indexing tasks to coordinate handoffs, +manage failures, and ensure that the scalability and replication requirements are maintained. + +This service is provided in the `druid-rocketmq-indexing-service` contrib Apache Druid extension (see +[Including Extensions](../../development/extensions.md#loading-extensions)). + +## Tutorial + +This page contains reference documentation for `Apache RocketMQ-based` ingestion. + +## Submitting a Supervisor Spec + +The `RocketMQ` indexing service requires that the `druid-rocketmq-indexing-service` extension be loaded on both the Overlord and the +MiddleManagers. A supervisor for a dataSource is started by submitting a supervisor spec via HTTP POST to +`http://<OVERLORD_IP>:<OVERLORD_PORT>/druid/indexer/v1/supervisor`, for example: + +``` +curl -X POST -H 'Content-Type: application/json' -d @supervisor-spec.json http://localhost:8090/druid/indexer/v1/supervisor +``` + +A sample supervisor spec is shown below: + +```json +{ + "type": "rocketmq", + "dataSchema": { + "dataSource": "metrics-rocketmq", + "timestampSpec": { + "column": "timestamp", + "format": "auto" + }, + "dimensionsSpec": { + "dimensions": [], + "dimensionExclusions": [ + "timestamp", + "value" + ] + }, + "metricsSpec": [ + { + "name": "count", + "type": "count" + }, + { + "name": "value_sum", + "fieldName": "value", + "type": "doubleSum" + }, + { + "name": "value_min", + "fieldName": "value", + "type": "doubleMin" + }, + { + "name": "value_max", + "fieldName": "value", + "type": "doubleMax" + } + ], + "granularitySpec": { + "type": "uniform", + "segmentGranularity": "HOUR", + "queryGranularity": "NONE" + } + }, + "ioConfig": { + "topic": "metrics", + "inputFormat": { + "type": "json" + }, + "consumerProperties": { + "nameserver.url": "localhost:9876" + }, + "taskCount": 1, + "replicas": 1, + "taskDuration": "PT1H" + }, + "tuningConfig": { + "type": "rocketmq", + "maxRowsPerSegment": 5000000 + } +} +``` + +## Supervisor Configuration + +|Field|Description|Required| +|--------|-----------|---------| +|`type`|The supervisor type, this should always be `rocketmq`.|yes| +|`dataSchema`|The schema that will be used by the `RocketMQ` indexing task during ingestion. See [`dataSchema`](../../ingestion/index.md#dataschema) for details.|yes| +|`ioConfig`|A `RocketMQSupervisorIOConfig` object for configuring `RocketMQ` connection and I/O-related settings for the supervisor and indexing task. See [`RocketMQSupervisorIOConfig`](#rocketmqsupervisorioconfig) below.|yes| +|`tuningConfig`|A `RocketMQSupervisorTuningConfig` object for configuring performance-related settings for the supervisor and indexing tasks. See [`RocketMQSupervisorTuningConfig`](#rocketmqsupervisortuningconfig) below.|no| + +### `RocketMQSupervisorIOConfig` + +|Field|Type|Description|Required| +|-----|----|-----------|--------| +|`topic`|String|The `RocketMQ` topic to read from. This must be a specific topic as topic patterns are not supported.|yes| +|`inputFormat`|Object|[`inputFormat`](../../ingestion/data-formats.md#input-format) to specify how to parse input data. See [the below section](#specifying-data-format) for details about specifying the input format.|yes| +|`consumerProperties`|Map<String, Object>|A map of properties to be passed to the `RocketMQ` consumer. See [next section](#more-on-consumerproperties) for more information.|yes| +|`pollTimeout`|Long|The length of time to wait for the `RocketMQ` consumer to poll records, in milliseconds|no (default == 100)| +|`replicas`|Integer|The number of replica sets, where 1 means a single set of tasks (no replication). Replica tasks will always be assigned to different workers to provide resiliency against process failure.|no (default == 1)| +|`taskCount`|Integer|The maximum number of *reading* tasks in a *replica set*. This means that the maximum number of reading tasks will be `taskCount * replicas` and the total number of tasks (*reading* + *publishing*) will be higher than this. See [Capacity Planning](#capacity-planning) below for more details. The number of reading tasks will be less than `taskCount` if `taskCount > {numRocketMQMessageQueues}`.|no (default == 1)| +|`taskDuration`|ISO8601 Period|The length of time before tasks stop reading and begin publishing their segment.|no (default == `PT1H`)| +|`startDelay`|ISO8601 Period|The period to wait before the supervisor starts managing tasks.|no (default == `PT5S`)| +|`period`|ISO8601 Period|How often the supervisor will execute its management logic. Note that the supervisor will also run in response to certain events (such as tasks succeeding, failing, and reaching their `taskDuration`) so this value specifies the maximum time between iterations.|no (default == `PT30S`)| +|`useEarliestOffset`|Boolean|If a supervisor is managing a dataSource for the first time, it will obtain a set of starting offsets from `RocketMQ`. This flag determines whether it retrieves the earliest or latest offsets in `RocketMQ`. Under normal circumstances, subsequent tasks will start from where the previous segments ended so this flag will only be used on first run.|no (default == false)| +|`completionTimeout`|ISO8601 Period|The length of time to wait before declaring a publishing task as failed and terminating it. If this is set too low, your tasks may never publish. The publishing clock for a task begins roughly after `taskDuration` elapses.|no (default == `PT30M`)| +|`lateMessageRejectionStartDateTime`|ISO8601 DateTime|Configure tasks to reject messages with timestamps earlier than this date time; for example if this is set to `2016-01-01T11:00Z` and the supervisor creates a task at *`2016-01-01T12:00Z`*, messages with timestamps earlier than *`2016-01-01T11:00Z`* will be dropped. This may help prevent concurrency issues if your data stream has late messages and you have multiple pipelines that need to operate on the same segments (e.g. a realtime and a nightly batch ingestion pipeline).|no (default == none)| +|`lateMessageRejectionPeriod`|ISO8601 Period|Configure tasks to reject messages with timestamps earlier than this period before the task was created; for example if this is set to `PT1H` and the supervisor creates a task at *`2016-01-01T12:00Z`*, messages with timestamps earlier than *`2016-01-01T11:00Z`* will be dropped. This may help prevent concurrency issues if your data stream has late messages and you have multiple pipelines that need to operate on the same segments (e.g. a realtime and a nightly batch ingestion pipeline). Please note that only one of `lateMessageRejectionPeriod` or `lateMessageRejectionStartDateTime` can be specified.|no (default == none)| +|`earlyMessageRejectionPeriod`|ISO8601 Period|Configure tasks to reject messages with timestamps later than this period after the task reached its `taskDuration`; for example if this is set to `PT1H`, the `taskDuration` is set to `PT1H` and the supervisor creates a task at *`2016-01-01T12:00Z`*, messages with timestamps later than *`2016-01-01T14:00Z`* will be dropped. **Note:** Tasks sometimes run past their task duration, for example, in cases of supervisor failover. Setting `earlyMessageRejectionPeriod` too low may cause messages to be dropped unexpectedly whenever a task runs past its originally configured task duration.|no (default == none)| + +#### More on consumerProperties + +Now `consumerProperties` only support one property. This must contain a property `nameserver.url` with a list of `RocketMQ` name servers in the form: `<NAMESREV_1>:<PORT_1>;<NAMESREV_2>:<PORT_2>;...`. + +#### Specifying data format + +`RocketMQ` indexing service supports both [`inputFormat`](../../ingestion/data-formats.md#input-format) and [`parser`](../../ingestion/data-formats.md#parser) to specify the data format. +The `inputFormat` is a new and recommended way to specify the data format for `RocketMQ` indexing service, +but unfortunately, it doesn't support all data formats supported by the legacy `parser`. Review comment: Yes. Actually, parser is supported by SeekableStreamIndexTaskRunner. It's a deprecated interface and will be replaced by InputFormat. Now those two interfaces are available. -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
