This is an automated email from the ASF dual-hosted git repository.
mxsm pushed a commit to branch master
in repository https://gitbox.apache.org/repos/asf/eventmesh.git
The following commit(s) were added to refs/heads/master by this push:
new 61e139223 [ISSUE #4658] Add documentation for dingtalk sink connector.
(#4660)
61e139223 is described below
commit 61e1392238e07277cf1ae4c9d214c3a5b5190089
Author: yanrongzhen <[email protected]>
AuthorDate: Sat Dec 16 21:05:09 2023 +0800
[ISSUE #4658] Add documentation for dingtalk sink connector. (#4660)
* Add documentation for dingtalk sink connector.
* fix
---
.../eventmesh-connector-dingtalk/README.md | 26 ++++++++++++++++++++++
.../eventmesh-connector-dingtalk/README_CN.md | 26 ++++++++++++++++++++++
.../src/main/resources/sink-config.yml | 18 +++++++--------
3 files changed, 61 insertions(+), 9 deletions(-)
diff --git a/eventmesh-connectors/eventmesh-connector-dingtalk/README.md
b/eventmesh-connectors/eventmesh-connector-dingtalk/README.md
new file mode 100644
index 000000000..40c7111d5
--- /dev/null
+++ b/eventmesh-connectors/eventmesh-connector-dingtalk/README.md
@@ -0,0 +1,26 @@
+# eventmesh-connector-dingtalk
+
+## DingtalkSinkConnector：from eventmesh to dingtalk。
+
+1. launch your eventmesh-runtime.
+2. enable sinkConnector and check `sink-config.yml`.
+3. send a message to eventmesh with the topic defined in `pubSubConfig.subject`
+```yaml
+pubSubConfig:
+ # default port is 10000
+ meshAddress: 127.0.0.1:10000
+ subject: TEST-TOPIC-DINGTALK
+ idc: FT
+ env: PRD
+ group: dingTalkSink
+ appId: 5034
+ userName: dingTalkSinkUser
+ passWord: dingTalkPassWord
+sinkConnectorConfig:
+ connectorName: dingTalkSink
+ # Please refer to:
https://open.dingtalk.com/document/orgapp/the-robot-sends-a-group-message
+ appKey: dingTalkAppKey
+ appSecret: dingTalkAppSecret
+ openConversationId: dingTalkOpenConversationId
+ robotCode: dingTalkRobotCode
+```
\ No newline at end of file
diff --git a/eventmesh-connectors/eventmesh-connector-dingtalk/README_CN.md
b/eventmesh-connectors/eventmesh-connector-dingtalk/README_CN.md
new file mode 100644
index 000000000..26ca8cdad
--- /dev/null
+++ b/eventmesh-connectors/eventmesh-connector-dingtalk/README_CN.md
@@ -0,0 +1,26 @@
+# eventmesh-connector-dingtalk
+
+## DingtalkSinkConnector：从 eventmesh 到 dingtalk。
+
+1. 启动你的 eventmesh-runtime。
+2. 启用 sinkConnector 并检查 `sink-config.yml`。
+3. 向 eventmesh 发送带有在 `pubSubConfig.subject` 中定义的主题消息。
+```yaml
+pubSubConfig:
+ # 默认端口10000
+ meshAddress: 127.0.0.1:10000
+ subject: TEST-TOPIC-DINGTALK
+ idc: FT
+ env: PRD
+ group: dingTalkSink
+ appId: 5034
+ userName: dingTalkSinkUser
+ passWord: dingTalkPassWord
+sinkConnectorConfig:
+ connectorName: dingTalkSink
+ # 以下配置参考
https://open.dingtalk.com/document/orgapp/the-robot-sends-a-group-message
+ appKey: dingTalkAppKey
+ appSecret: dingTalkAppSecret
+ openConversationId: dingTalkOpenConversationId
+ robotCode: dingTalkRobotCode
+```
\ No newline at end of file
diff --git
a/eventmesh-connectors/eventmesh-connector-dingtalk/src/main/resources/sink-config.yml
b/eventmesh-connectors/eventmesh-connector-dingtalk/src/main/resources/sink-config.yml
index aceb61fd4..551013beb 100644
---
a/eventmesh-connectors/eventmesh-connector-dingtalk/src/main/resources/sink-config.yml
+++
b/eventmesh-connectors/eventmesh-connector-dingtalk/src/main/resources/sink-config.yml
@@ -17,16 +17,16 @@
pubSubConfig:
meshAddress: 127.0.0.1:10000
- subject: TEST-TOPIC-DINGDING
+ subject: TEST-TOPIC-DINGTALK
idc: FT
env: PRD
- group: dingDingSink
+ group: dingTalkSink
appId: 5034
- userName: dingDingSinkUser
- passWord: dingDingPassWord
+ userName: dingTalkSinkUser
+ passWord: dingTalkPassWord
sinkConnectorConfig:
- connectorName: dingDingSink
- appKey: dingDingAppKey
- appSecret: dingDingAppSecret
- openConversationId: dingDingOpenConversationId
- robotCode: dingDingRobotCode
+ connectorName: dingTalkSink
+ appKey: dingTalkAppKey
+ appSecret: dingTalkAppSecret
+ openConversationId: dingTalkOpenConversationId
+ robotCode: dingTalkRobotCode
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
