http://git-wip-us.apache.org/repos/asf/flex-utilities/blob/cda78507/installer/RELEASE_GUIDE ---------------------------------------------------------------------- diff --git a/installer/RELEASE_GUIDE b/installer/RELEASE_GUIDE deleted file mode 100644 index a67db6f..0000000 --- a/installer/RELEASE_GUIDE +++ /dev/null @@ -1,53 +0,0 @@ -<!-- - -Licensed to the Apache Software Foundation (ASF) under one or more -contributor license agreements. See the NOTICE file distributed with -this work for additional information regarding copyright ownership. -The ASF licenses this file to You under the Apache License, Version 2.0 -(the "License"); you may not use this file except in compliance with -the License. You may obtain a copy of the License at - -http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. - ---> - -Steps to follow in preparation for a release of InstallApacheFlex - -1. Check out the code from https://git-wip-us.apache.org/repos/asf/flex-utilities.git - -2.a. If it is a major release, - - bump up the "release.version" property in the build.properties file - - reset the build.number property in the build.number file to 0 - -2.b. If it is a minor release, run: ant update-version - -3. Create local.properties and add the following: - - Modify the RELEASE_KEYSTORE_FILE and CERT_PASSWORD_FILE variables with the correct file paths - (You need to obtain the installapacheflex_self.p12 file and its password from the previous - release manager for InstallApacheFlex) - - WARNING WARNING WARNING - Do not place the 2 certificate files anywhere in the installer directory or in a subdirectory under it. - If you do so the certificate files will be packaged into the source release. That would be very bad. - -4. Run: - ant release - -This step - - downloads all the necessary files, - - updates the version numbers in InstallApacheFlex-app.xml and sdk-installer-config-4.0.xml - - creates the .exe or .dmg file depending on the OS you are working on - - creates the source release files as a .zip file and a tar.gz file - - signs the artifacts to create corresponding .asc and .md5 files (assumes that you have a pgp - id and keypair set up and prompts for the passphrase) - -5. Upload all the files under the /release directory to the following directory before calling a VOTE. - https://dist.apache.org/repos/dist/dev/flex/installer/{version}/{RCversion}/ - -6. Check that your key is contained in https://dist.apache.org/repos/dist/release/flex/KEYS if not add it.
http://git-wip-us.apache.org/repos/asf/flex-utilities/blob/cda78507/installer/RELEASE_NOTES ---------------------------------------------------------------------- diff --git a/installer/RELEASE_NOTES b/installer/RELEASE_NOTES deleted file mode 100644 index 2e68b0c..0000000 --- a/installer/RELEASE_NOTES +++ /dev/null @@ -1,121 +0,0 @@ -<!-- - -Licensed to the Apache Software Foundation (ASF) under one or more -contributor license agreements. See the NOTICE file distributed with -this work for additional information regarding copyright ownership. -The ASF licenses this file to You under the Apache License, Version 2.0 -(the "License"); you may not use this file except in compliance with -the License. You may obtain a copy of the License at - -http://www.apache.org/licenses/LICENSE-2.0 - -Unless required by applicable law or agreed to in writing, software -distributed under the License is distributed on an "AS IS" BASIS, -WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -See the License for the specific language governing permissions and -limitations under the License. - ---> - -Apache Flex -Copyright 2015 The Apache Software Foundation - -Apache Flex SDK Installer 3.2 - -Ant_On_AIR improvements: -1. add en_AU locale. -2. check free disk space. -3. istrue and isfalse conditions -4. workaround for Get task on SourceForge mirrors -5. use flash.globalization.DateTimeFormatter to remove dependency on Flex SDK -6. replacetoken and replacevalue tags -7. fix failure message propagation from child ant scripts - -Installer Issues Resolved: -FLEX-34394: some localization strings mention Adobe Flash Builder in the installer title -FLEX-34392: Missing localization strings in the installer -FLEX-34445: some errors in installer are missing info= -FLEX-34591: Don't log FP and AIR versions for products that don't use them -FLEX-34590: Don't assume installer.xml exists -FLEX-34589: Set install XML file via command line option -FLEX-34398: log not saved when installer close button clicked -FLEX-34408: Installer log does't contain version of Flex SDK installed -FLEX-34446: Common windows installer error -FLEX-34605: Code formatting and cleanup -FLEX-34606: Redundant variable -FLEX-34393: installer should remember language -FLEX-34310: Add button "back" to installer -FLEX-34624: Additional Logging for installer -FLEX-34425: Make MD5 change non fatal -FLEX-34687: Error #1009 encountered when changing languages on License Screen - -Other Installer Improvements: -1. Fine-tuned some Chinese Translations -2. Added step/install override config option. Remove horizontal scrollbar on license list -3. add user abort message to en_US -4. make clear the version logged is the installer version -5. no need to log error twice + stop RTE when no internet connection -6. Russian translation -7. Updated README in installer doc to include JetBrains IntelliJ IDEA instructions. -8. dded ApacheURLLoader component that extends URLLoader. This new component is only different from URLLoader in that it looks for https connections and uses as3httpclient for these connections. - - -Apache Flex SDK Installer 3.1 -1. Fixed bugs in ant_on_air library to support more checksums in installer scripts. -2. Reports more information when an install fails or is aborted. -3. Caching is now implemented in the ant scripts. This means that Apache Flex SDK - 4.12.1 and earlier will not use the download cache and may install more slowly. -4. Minor UI/usability improvements -5. Installer log now saved to disk in installation directory - -Apache Flex SDK Installer 3.0 -1. Now uses external localized strings -2. Added support for install scripts based on Apache Ant - -Apache Flex SDK Installer 2.7 -1. Added support for OSMF2.0 [http://blogs.adobe.com/osmf/2012/03/osmf-2-0-now-available.html] - From Apache Flex 4.11.0 onwards, support for OSMF2.0 has been added. -2. The osmf.swf RSL now gets generated by the Installer. - -Apache Flex SDK Installer 2.6 -Here is a list of significant issues that were fixed with this release: -1. Able to select which version of AIR and Flash Player to use. - -Apache Flex SDK Installer 2.5 - -Issues addressed in this release: -Here is a list of significant issues that were fixed with this release: -1. Enable Flex SDK download stats tracking -2. https://issues.apache.org/jira/browse/FLEX-33426 (UI fix for license screen (show regular checkboxes)) -3. https://issues.apache.org/jira/browse/FLEX-33151 (Auto-update logic fix) -4. French and Dutch language locale fixes. -5. Added the SDK version number to be downloaded in the window title. -6. https://issues.apache.org/jira/browse/FLEX-33202 (more issues). -7. https://issues.apache.org/jira/browse/FLEX-33419 (added german language). - - -Apache Flex SDK Installer 2.0 -1. If you have previously installed a release candidate (RC) version of - Apache Flex SDK Installer, you need to uninstall it first. - And then run the downloaded installer file. -2. From Flex 4.9 onwards, the Text Layout Framework (TLF) is part of the Flex SDK. - So the installer does not download it separately anymore. -3. By default, Apache Flex SDK Installer 2.0 downloads Adobe Flash Player 11.1 - and Adobe AIR SDK 3.4. If you want to change it to any other supported - combination, save a copy of the config file found at: - http://incubator.apache.org/flex/sdk-installer-config-2.0.xml, - modify the download urls to point to the required versions. Then run the app - from command line mode with the optional command line parameter: - -config=<path to config file>. - The new urls will be used to download the required dependencies. - -Issues addressed in this release: -Here is a list of significant issues that were fixed with this release: -1. https://issues.apache.org/jira/browse/FLEX-33214 (Fix UI of license screen) -2. https://issues.apache.org/jira/browse/FLEX-33122 (Enable language switching) - Available languages: English(US), English(AU), English(GB), Español (ES), - Français, Greek, Nederlands and Português - -Apache Flex Installer SDK 1.0 - -1. If you have previously installed a pre-release version of Apache Flex SDK Installer, you need to uninstall it first. And then run the downloaded installer file. http://git-wip-us.apache.org/repos/asf/flex-utilities/blob/cda78507/installer/build.number ---------------------------------------------------------------------- diff --git a/installer/build.number b/installer/build.number deleted file mode 100644 index b8396e1..0000000 --- a/installer/build.number +++ /dev/null @@ -1,3 +0,0 @@ -#Copyright 2014 The Apache Software Foundation. -#Sat, 28 Sep 2013 18:23:00 +1000 -build.number=0 http://git-wip-us.apache.org/repos/asf/flex-utilities/blob/cda78507/installer/build.properties ---------------------------------------------------------------------- diff --git a/installer/build.properties b/installer/build.properties deleted file mode 100644 index 0f3ea24..0000000 --- a/installer/build.properties +++ /dev/null @@ -1,59 +0,0 @@ -<?xml version="1.0"?> -<!-- - - Licensed to the Apache Software Foundation (ASF) under one or more - contributor license agreements. See the NOTICE file distributed with - this work for additional information regarding copyright ownership. - The ASF licenses this file to You under the Apache License, Version 2.0 - (the "License"); you may not use this file except in compliance with - the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - ---> - -#nano version number is added by build script -release.version=3.2 - -#Flex Locations -FLEX_HOME_WIN=C:/Program Files (x86)/Adobe/Adobe Flash Builder 4.6/sdks/ApacheFlex4.10.0 -FLEX_HOME_MAC=/Users/justinmclean/Documents/ApacheFlex4.10 - -#AIR Locations -AIR_HOME_WIN=${FLEX_HOME_WIN} -AIR_HOME_MAC=${FLEX_HOME_MAC} - -#App Settings -APP_NAME=InstallApacheFlex -APP_EXTENSION=mxml -APP_CONFIG_XML_NAME=installer/sdk-installer-config-4.0 -SOURCE_DIR=${basedir}/src -ASSETS_DIR=${basedir}/src/assets -LIBRARY_DIR=${basedir}/libs -RELEASE_DIR=${basedir}/release -BUILD_DIR=${basedir}/build -INSTALLER_PROJECT_NAME=installer -COMMON_PROJECT_NAME=common -COMMON_PROJECT_DIR=${basedir}/../${COMMON_PROJECT_NAME} -COMMON_SOURCE_DIR=${COMMON_PROJECT_DIR}/src -ANT_ON_AIR_DIR=${basedir}/../ant_on_air/bin - -#Etc Settings -DEBUG_FLAG=false -TEMP_PASS_CHANGE_THIS=random123$%^ - -#Certificate for release build. Modify only when you are making a release build (See RELEASE_GUIDE first) -STORETYPE=pkcs12 -RELEASE_KEYSTORE_FILE=C:/p/documents/certificates/installapacheflex_self.p12 -CERT_PASSWORD_FILE=C:/p/documents/certificates/installapacheflex.password -CERT_NAME=Apache Flex -CERT_ORG_UNIT= -CERT_ORG_NAME= -CERT_COUNTRY=US -CERT_KEY_TYPE=2048-RSA http://git-wip-us.apache.org/repos/asf/flex-utilities/blob/cda78507/installer/build.xml ---------------------------------------------------------------------- diff --git a/installer/build.xml b/installer/build.xml deleted file mode 100644 index 2d1c83f..0000000 --- a/installer/build.xml +++ /dev/null @@ -1,670 +0,0 @@ -<?xml version="1.0"?> -<!-- - - Licensed to the Apache Software Foundation (ASF) under one or more - contributor license agreements. See the NOTICE file distributed with - this work for additional information regarding copyright ownership. - The ASF licenses this file to You under the Apache License, Version 2.0 - (the "License"); you may not use this file except in compliance with - the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - ---> - -<project name="Installer" basedir="." default="build"> - - <!--load environment variables prefixed with env --> - <property environment="env"/> - - <!--location of property file --> - <property file="${basedir}/local.properties" /> - <condition property="CERT_PASSWORD_FILE" value="${CERT_PASSWORD_FILE_WIN}" > - <and> - <not> - <available file="${CERT_PASSWORD_FILE}" /> - </not> - <available file="${CERT_PASSWORD_FILE_WIN}" /> - </and> - </condition> - <condition property="CERT_PASSWORD_FILE" value="${CERT_PASSWORD_FILE_MAC}" > - <and> - <not> - <available file="${CERT_PASSWORD_FILE}" /> - </not> - <available file="${CERT_PASSWORD_FILE_MAC}" /> - </and> - </condition> - <condition property="RELEASE_KEYSTORE_FILE" value="${RELEASE_KEYSTORE_FILE_WIN}" > - <and> - <not> - <available file="${RELEASE_KEYSTORE_FILE}" /> - </not> - <available file="${RELEASE_KEYSTORE_FILE_WIN}" /> - </and> - </condition> - <condition property="RELEASE_KEYSTORE_FILE" value="${RELEASE_KEYSTORE_FILE_MAC}" > - <and> - <not> - <available file="${RELEASE_KEYSTORE_FILE}" /> - </not> - <available file="${RELEASE_KEYSTORE_FILE_MAC}" /> - </and> - </condition> - - <property file="${basedir}/build.properties" description="Properties for Apache Flex SDK Installer project" /> - <property file="${basedir}/build.number"/> - <property file="${CERT_PASSWORD_FILE}"/> - - <property name="installer.version" value="${release.version}.${build.number}"/> - <property name="kit.prefix" value="apache-flex-sdk-installer-${installer.version}"/> - <property name="source.kit" value="${kit.prefix}-src"/> - <property name="binary.kit" value="${kit.prefix}-bin"/> - <property name="LOCAL_CONFIG_FILE" value="${basedir}/src/installer/sdk-installer-config-4.0.xml" /> - - <!--<property name="commons.zip" value="http://projects.yoolab.org/maven/content/repositories/releases/org/as3commons/as3commons-zip/1.0.0-alpha.1/as3commons-zip-1.0.0-alpha.1.swc"; />--> - <!-- use this one for now until we find a better source --> - <property name="commons.zip" value="https://github.com/bigosmallm/MakeApacheFlexForFlashBuilder/blob/master/libs/as3commons-zip-1.0.0-alpha.1.swc?raw=true"; /> - - <!-- - Properties are immutable so value frozen first time property is set. - If FLEX_HOME is not set with -DFLEX_HOME=/path/to/flex/sdk on the ant command line - use the environment variable, if it exists. Else if windows, use FLEX_HOME_WIN - else use FLEX_HOME_MAC, which are both defined in build.properties. - --> - <condition property="FLEX_HOME" value="${env.FLEX_HOME}"> - <isset property="env.FLEX_HOME" /> - </condition> - <condition property="FLEX_HOME" value="${FLEX_HOME_WIN}"> - <os family="windows"/> - </condition> - <condition property="FLEX_HOME" value="${FLEX_HOME_MAC}"> - <os family="mac"/> - </condition> - <condition property="FLEX_HOME" value="${FLEX_HOME_LINUX}"> - <os family="unix"/> - </condition> - - <condition property="adl" value="adl.exe"> - <os family="windows"/> - </condition> - - <condition property="adl" value="adl"> - <os family="mac"/> - </condition> - - <condition property="runtime" value="win"> - <os family="windows"/> - </condition> - - <condition property="runtime" value="mac"> - <os family="mac"/> - </condition> - - <condition property="LOCAL_CONFIG_URL" value="file:///${LOCAL_CONFIG_FILE}"> - <os family="windows"/> - </condition> - <property name="LOCAL_CONFIG_URL" value="file://${LOCAL_CONFIG_FILE}" /> - - <!-- - Properties are immutable so value frozen first time property is set. - If AIR_HOME is not set on the command line with -DAIR_HOME=/path/to/air/sdk on the - ant command line use the environment variable, if it exists. Else if windows, use - AIR_HOME_WIN else use AIR_HOME_MAC, which are both defined in build.properties. - --> - <condition property="AIR_HOME" value="${env.AIR_HOME}"> - <isset property="env.AIR_HOME" /> - </condition> - <condition property="AIR_HOME" value="${AIR_HOME_WIN}"> - <os family="windows"/> - </condition> - <condition property="AIR_HOME" value="${AIR_HOME_MAC}"> - <os family="mac"/> - </condition> - <condition property="AIR_HOME" value="${AIR_HOME_LINUX}"> - <os family="unix"/> - </condition> - - <condition property="cert_pwd_not_found" > - <not> - <available file="${CERT_PASSWORD_FILE}"/> - </not> - </condition> - - <condition property="KEYSTORE" value="${RELEASE_KEYSTORE_FILE}" > - <available file="${CERT_PASSWORD_FILE}"/> - </condition> - - <condition property="KEYSTORE" value="temp.p12" > - <not> - <available file="${CERT_PASSWORD_FILE}"/> - </not> - </condition> - - <condition property="CERT_PASSWORD" value="${TEMP_PASS_CHANGE_THIS}" > - <not> - <available file="${CERT_PASSWORD_FILE}"/> - </not> - </condition> - - <!-- compilers --> - <property name="ADL" value="${AIR_HOME}/bin/adl"/> - <property name="ADT" value="${AIR_HOME}/lib/adt.jar"/> - - <!-- additional tasks - mxmlc tag --> - <path id="flexTasks.path"> - <fileset dir="${FLEX_HOME}"> - <include name="lib/flexTasks.jar" /> - <include name="ant/lib/flexTasks.jar" /> - </fileset> - </path> - <taskdef resource="flexTasks.tasks" classpathref="flexTasks.path"/> - - <!-- - Optional jars but should be in place for a real release build. - - For <rat> apache-rat-0.8.jar and apache-rat-tasks-0.8.jar should be in classpath. - See rat-report. - --> - <path id="anttask.classpath"> - <fileset dir="${env.ANT_HOME}/lib"> - <include name="**/apache-rat*.jar"/> - </fileset> - <fileset dir="${user.home}"> - <include name=".ant/lib/**/apache-rat*.jar"/> - </fileset> - </path> - - <!-- AIR package extension --> - <condition property="extension" value="exe"> - <os family="windows" /> - </condition> - <condition property="extension" value="dmg"> - <os family="mac" /> - </condition> - <condition property="extension" value="deb"> - <os family="unix" /> - </condition> - - <target name="build" depends="init,certificate,compile,packagenative,cleanup" - description="Compiles and packages application"/> - - <target name="release" depends="clean,build,source-package,rat-report,sign,copy-misc" - description="Build the application and package up the distros for release."/> - - <target name="init" depends="clean,createDirs,update-version-in-xml-files" - description="Creates the deploy folders and sets app extension"/> - - <target name="clean" description="Cleans up old files."> - <delete dir="${BUILD_DIR}" failOnError="false" includeEmptyDirs="true" /> - <delete dir="${LIBRARY_DIR}" failOnError="false" includeEmptyDirs="true" /> - <delete dir="${RELEASE_DIR}" failOnError="false" includeEmptyDirs="true" /> - <delete file="${basedir}/rat.report" failOnError="false"/> - </target> - - <target name="cleanup" description="Cleans up old files." unless="no.cleanup"> - <delete dir="${BUILD_DIR}" failOnError="false" includeEmptyDirs="true" /> - </target> - - <target name="createDirs"> - <echo>***************************************${line.separator}Execute the update-version target once,${line.separator}and only once, when you modifiy this app.${line.separator}This will increment the version number to allow${line.separator}the app to be updated by the AIR installer.${line.separator}*************************************** - </echo> - <mkdir dir="${BUILD_DIR}"/> - <mkdir dir="${RELEASE_DIR}"/> - </target> - - <!-- Make sure version, esp, build.number, in APP_NAME-app.xml is in sync. --> - <target name="update-version-in-xml-files" description="Update version in APP_NAME-app.xml."> - <echo message="version in ${APP_NAME}-app.xml will be ${installer.version}"/> - <replaceregexp byline="true"> - <regexp pattern="<versionNumber>(\d+\.)?(\d+\.)?(\d+)</versionNumber>"/> - <substitution expression="<versionNumber>${installer.version}</versionNumber>"/> - <fileset dir="${SOURCE_DIR}"> - <include name="${APP_NAME}-app.xml"/> - </fileset> - </replaceregexp> - <replaceregexp byline="true"> - <regexp pattern="<latest>(\d+\.)?(\d+\.)?(\d+)</latest>"/> - <substitution expression="<latest>${installer.version}</latest>"/> - <fileset dir="${SOURCE_DIR}"> - <include name="${APP_CONFIG_XML_NAME}.xml"/> - </fileset> - </replaceregexp> - </target> - - <!-- - Run this target once, and then rebuild, when you make a change to this app - so that the AIR Installer will allow the app to be updated. The build.number - property in the file build.property will be read and then incremented and the - nano version number in the <version> tag in InstallApacheFlex-app.xml will be - updated. - --> - <target name="update-version" description="Update the app version number so the installer will be updated."> - <tstamp> - <format property="touch.year" pattern="yyyy"/> - </tstamp> - - <propertyfile file="build.number" - comment="Copyright ${touch.year} The Apache Software Foundation."> - <entry key="build.number" type="int" default="0" operation="+"/> - </propertyfile> - - </target> - - <target name="packagenative" depends="packageair" - description="Packages the AIR file from the build directory to create a native installer (exe/dmg) file"> - - <java jar="${ADT}" fork="true" - failonerror="true" - maxmemory="512m"> - <arg value="-package"/> - <arg value="-target"/> - <arg value="native"/> - <arg value="${RELEASE_DIR}/${binary.kit}.${extension}"/> - <arg value="${BUILD_DIR}/${APP_NAME}.air"/> - </java> - </target> - - <target name="check-as3commons.swc"> - <available file="${LIBRARY_DIR}/as3commons-zip-1.0.0-alpha.1.swc" property="as3commons.swc.present"/> - </target> - - <!-- This has a BSD license which is a reciprocal license with the Apache v2 license. --> - <target name="get-as3commons.swc" depends="check-as3commons.swc" unless="as3commons.swc.present" - description="Download as3commons.swc and fail if checksum mismatch."> - <mkdir dir="${LIBRARY_DIR}"/> - <get src="${commons.zip}" - dest="${LIBRARY_DIR}/as3commons-zip-1.0.0-alpha.1.swc" - verbose="true"/> - <!-- skip checksum until we find a valid file - <get src="${commons.zip}.md5" - dest="${LIBRARY_DIR}/as3commons-zip-1.0.0-alpha.1.swc.md5" - verbose="true"/> - <checksum file="${LIBRARY_DIR}/as3commons-zip-1.0.0-alpha.1.swc" algorithm="md5" verifyProperty="isMD5ok"/> - <delete file="${LIBRARY_DIR}/as3commons-zip-1.0.0-alpha.1.swc.md5" failOnError="false"/> - <fail message="Checksum failure for ${LIBRARY_DIR}/as3commons-zip-1.0.0-alpha.1.swc"> - <condition> - <isfalse value="${isMD5ok}"/> - </condition> - </fail> - --> - </target> - - <target name="check-as3httpclient.swc"> - <available file="${LIBRARY_DIR}/as3httpclient.swc" property="as3httpclient.swc.present"/> - </target> - - <!-- This has a BSD license which is a reciprocal license with the Apache v2 license. --> - <target name="get-as3httpclient.swc" depends="check-as3commons.swc" unless="as3httpclient.swc.present" - description="Download as3httpclient.swc"> - <mkdir dir="${LIBRARY_DIR}"/> - <get src="https://github.com/quetwo/as3httpclient/releases/download/1.0/as3httpclient.swc"; - dest="${LIBRARY_DIR}/as3httpclient.swc" - verbose="true"/> - </target> - - <target name="compile" depends="get-as3commons.swc, get-as3httpclient.swc" - description="Compiles the AIR application to a SWF file and places SWF in a temp directory to be packaged."> - <mxmlc file="${SOURCE_DIR}/${APP_NAME}.${APP_EXTENSION}" - output="${BUILD_DIR}/${APP_NAME}.swf" - static-rsls="true" - accessible="true" - configname="air" - debug="${DEBUG_FLAG}" - failonerror="true" - fork="true" - link-report="${BUILD_DIR}/${APP_NAME}.lnk.xml" - maxmemory="512m"> - <source-path path-element="${SOURCE_DIR}"/> - <source-path path-element="${COMMON_SOURCE_DIR}"/> - <external-library-path file="${AIR_HOME}/frameworks/libs/air/airglobal.swc" append="true"/> - <library-path dir="${LIBRARY_DIR}" includes="*.swc" append="true"/> - <library-path dir="${ANT_ON_AIR_DIR}" includes="*.swc" append="true"/> - <define name="INSTALLER::releaseVersion" value="${release.version}"/> - <define name="INSTALLER::buildNumber" value="${build.number}"/> - </mxmlc> - </target> - - <!-- Make sure to use the same certificate each time so we can update the app. --> - <target name="certificate" if="cert_pwd_not_found"> - <antcall target="generate-certificate"/> - </target> - - <target name="generate-certificate"> - <echo message="Using cert ${KEYSTORE}" /> - <java jar="${ADT}" fork="true" - failonerror="true"> - <arg value="-certificate"/> - <arg value="-cn"/> - <arg value="${CERT_NAME}"/> - <arg value="-ou"/> - <arg value="${CERT_ORG_UNIT}"/> - <arg value="-o"/> - <arg value="${CERT_ORG_NAME}"/> - <arg value="-c"/> - <arg value="${CERT_COUNTRY}"/> - <arg value="${CERT_KEY_TYPE}"/> - <arg value="${KEYSTORE}"/> - <arg value="${CERT_PASSWORD}"/> - </java> - </target> - - <target name="packageair" - description="Packages the build SWF file from a temp directory to create an AIR file"> - <echo message="Using cert ${KEYSTORE}" /> - <java jar="${ADT}" fork="true" - failonerror="true" - maxmemory="512m"> - <arg value="-package"/> - <arg value="-storetype"/> - <arg value="${STORETYPE}"/> - <arg value="-keystore"/> - <arg value="${KEYSTORE}"/> - <arg value="-storepass"/> - <arg value="${CERT_PASSWORD}"/> - <arg value="${BUILD_DIR}/${APP_NAME}.air"/> - <arg value="${SOURCE_DIR}/${APP_NAME}-app.xml"/> - <arg value="${basedir}/LICENSE"/> - <arg value="${basedir}/NOTICE"/> - <arg value="-C"/> - <arg value="${BUILD_DIR}"/> - <arg value="${BUILD_DIR}/${APP_NAME}.swf"/> - <arg value="-C"/> - <arg value="${SOURCE_DIR}"/> - <arg value="${SOURCE_DIR}/${APP_CONFIG_XML_NAME}.xml"/> - <arg value="${ASSETS_DIR}"/> - </java> - </target> - - <target name="copy-misc" description="Copy config files to release directory"> - <copy file="${basedir}/README" tofile="${RELEASE_DIR}/READme"/> - </target> - - <!-- - Packages the source distribution with ZIP and TAR_GZIP. - The source file line endings match the package type. - --> - <target name="source-package" description="Package source files."> - <mkdir dir="${BUILD_DIR}/temp"/> - <copy todir="${BUILD_DIR}/temp/${COMMON_PROJECT_NAME}" includeEmptyDirs="false"> - <fileset dir="${COMMON_PROJECT_DIR}"> - <exclude name="*.p12"/> - <exclude name="*.password"/> - <exclude name="rat.report"/> - <exclude name="libs/**"/> - <exclude name="bin/**"/> - <exclude name="bin-debug/**"/> - <exclude name="release/**"/> - <exclude name=".settings/**"/> - <exclude name="**/.actionScriptProperties"/> - <exclude name="**/.flexProperties"/> - <exclude name="**/.flexLibProperties"/> - <exclude name="**/.project"/> - <exclude name="**/.idea/**"/> - </fileset> - </copy> - - <copy todir="${BUILD_DIR}/temp/ant_on_air" includeEmptyDirs="false"> - <fileset dir="${basedir}/../ant_on_air"> - <include name="build.properties" /> - <include name="build.xml" /> - </fileset> - </copy> - <copy todir="${BUILD_DIR}/temp/ant_on_air/src" includeEmptyDirs="false"> - <fileset dir="${basedir}/../ant_on_air/src"> - </fileset> - </copy> - <copy todir="${BUILD_DIR}/temp/ant_on_air/locale" includeEmptyDirs="false"> - <fileset dir="${basedir}/../ant_on_air/locale"> - </fileset> - </copy> - <copy todir="${BUILD_DIR}/temp/ant_on_air/tests" includeEmptyDirs="false"> - <fileset dir="${basedir}/../ant_on_air/tests"> - <exclude name="*.swf" /> - </fileset> - </copy> - - <copy todir="${BUILD_DIR}/temp/${INSTALLER_PROJECT_NAME}" includeEmptyDirs="false"> - <fileset dir="${basedir}"> - <exclude name="*.p12"/> - <exclude name="*.password"/> - <exclude name="rat.report"/> - <exclude name="libs/**"/> - <exclude name="bin/**"/> - <exclude name="bin-debug/**"/> - <exclude name="build/**"/> - <exclude name="release/**"/> - <exclude name="rc/**"/> - <exclude name=".settings/**"/> - <exclude name="**/.actionScriptProperties"/> - <exclude name="**/.flexProperties"/> - <exclude name="**/.flexLibProperties"/> - <exclude name="**/.project"/> - <exclude name="**/.idea/**"/> - <exclude name="local.properties"/> - <!-- These are bumped up to the top-level release directory. --> - <exclude name="DISCLAIMER"/> - <exclude name="LICENSE"/> - <exclude name="NOTICE"/> - <exclude name="README"/> - <exclude name="RELEASE_GUIDE"/> - <exclude name="RELEASE_NOTES"/> - </fileset> - </copy> - - <!-- Bump these up to the top-level release directory. --> - <copy todir="${BUILD_DIR}/temp" includeEmptyDirs="false"> - <fileset dir="${basedir}"> - <include name="DISCLAIMER"/> - <include name="LICENSE"/> - <include name="NOTICE"/> - <include name="README"/> - <include name="RELEASE_GUIDE"/> - <include name="RELEASE_NOTES"/> - </fileset> - </copy> - - <fixcrlf srcdir="${BUILD_DIR}/temp" eol="crlf" encoding="UTF8" excludes="**/assets/**,**/*.ttf,**/*.png" fixlast="false"/> - - <mkdir dir="${RELEASE_DIR}"/> - <zip destfile="${RELEASE_DIR}/${source.kit}.zip" - basedir="${BUILD_DIR}/temp"/> - - <fixcrlf srcdir="${BUILD_DIR}/temp" eol="unix" encoding="UTF8" excludes="**/assets/**,**/*.ttf,**/*.png" fixlast="false"/> - - <tar destfile="${RELEASE_DIR}/${source.kit}.tar.gz" - compression="gzip" - basedir="${BUILD_DIR}/temp"/> - - <delete dir="${BUILD_DIR}/temp"/> - <delete dir="${BUILD_DIR}"/> - </target> - - <!-- - Packages the binary distribution with ZIP and TAR_GZIP. - --> - <target name="binary-package" description="Package binary files."> - <mkdir dir="${RELEASE_DIR}"/> - - <zip destfile="${RELEASE_DIR}/${binary.kit}.zip"> - <fileset dir="${basedir}/release"> - <exclude name="**/*.zip"/> - <exclude name="**/*.tar*"/> - </fileset> - </zip> - - <tar destfile="${RELEASE_DIR}/${binary.kit}.tar.gz" compression="gzip"> - <zipfileset src="${RELEASE_DIR}/${binary.kit}.zip"/> - </tar> - </target> - - <!-- - Run the Apache Rat audit tool against the source in the source kit. - The report is written to rat.report. - - You need to place apache-rat-tasks-0.8.jar and apache-rat-0.8.jar in the - anttask.classpath in order to do this. If the jar isn't found, the report - will not be generated. - --> - <target name="rat-report" depends="rat-taskdef" if="have.rattasks" - description="Report on licenses in source kit."> - - <!-- Unzip the source kit --> - <unzip src="${RELEASE_DIR}/${source.kit}.zip" dest="${RELEASE_DIR}/temp"/> - - <property name="rat.dir" value="${RELEASE_DIR}/temp"/> - - <echo message="Checking files at ${rat.dir}, report is ${basedir}/rat.report"/> - - <rat:report xmlns:rat="antlib:org.apache.rat.anttasks" - reportFile="${basedir}/rat.report"> - <fileset dir="${rat.dir}"> - <exclude name="**/Apache License Version 2.txt"/> - <!-- Start of source files --> - <!-- Apache Category A: Authorized Licenses --> - <!-- "New BSD License" aka Modified BSD License" aka "BSD 3-Clause License" --> - <exclude name="${INSTALLER_PROJECT_NAME}/src/com/adobe/crypto/MD5Stream.as"/> - <exclude name="${INSTALLER_PROJECT_NAME}/src/com/adobe/utils/IntUtil.as"/> - <!-- generated source files that don't have Apache v2 license header --> - <exclude name="**/build.number"/> - <exclude name="**/.actionScriptProperties"/> - <exclude name="**/.flexProperties"/> - <exclude name="**/.flexLibProperties"/> - <exclude name="**/.project"/> - <exclude name="**/.fxpProperties"/> - <exclude name="**/.settings/**"/> - <exclude name="**/.idea/**"/> - <exclude name="**/*.iml"/> - <!-- End of source files --> - <!-- Start of binary files --> - <!-- exclude media (png, ico) --> - <exclude name="**/*.ico"/> - <exclude name="**/*.png"/> - <!-- exclude fonts --> - <exclude name="**/*.ttf"/> - <!-- End of binary files --> - </fileset> - </rat:report> - - <delete dir="${RELEASE_DIR}/temp" failOnError="false"/> - </target> - - <target name="rat-taskdef" description="Rat taskdef"> - <available property="have.rattasks" - resource="org/apache/rat/anttasks/antlib.xml" - classpathref="anttask.classpath"/> - - <antcall target="have-rattasks"/> - <antcall target="no-rattasks"/> - </target> - - <target name="have-rattasks" if="have.rattasks"> - <typedef resource="org/apache/rat/anttasks/antlib.xml" - uri="antlib:org.apache.rat.anttasks" - classpathref="anttask.classpath"/> - </target> - - <target name="no-rattasks" unless="have.rattasks"> - <echo message="Rat report not generated."/> - <echo message="rat jars (apache-rat-*.jar, apache-rat-tasks-*.jar)"/> - <echo message="not found in anttask.classpath"/> - </target> - - <target name="create-md5s" > - <checksum file="${RELEASE_DIR}/${source.kit}.zip" algorithm="md5" forceOverwrite="yes" /> - <checksum file="${RELEASE_DIR}/${source.kit}.tar.gz" algorithm="md5" forceOverwrite="yes" /> - <checksum file="${RELEASE_DIR}/${binary.kit}.${extension}" algorithm="md5" forceOverwrite="yes" /> - - </target> - - <target name="sign" > - <exec executable="gpg"> - <arg value="--armor" /> - <arg value="--output" /> - <arg value="${RELEASE_DIR}/${source.kit}.zip.asc" /> - <arg value="--detach-sig" /> - <arg value="${RELEASE_DIR}/${source.kit}.zip" /> - </exec> - - <exec executable="gpg"> - <arg value="--armor" /> - <arg value="--output" /> - <arg value="${RELEASE_DIR}/${source.kit}.tar.gz.asc" /> - <arg value="--detach-sig" /> - <arg value="${RELEASE_DIR}/${source.kit}.tar.gz" /> - </exec> - - <exec executable="gpg"> - <arg value="--armor" /> - <arg value="--output" /> - <arg value="${RELEASE_DIR}/${binary.kit}.${extension}.asc" /> - <arg value="--detach-sig" /> - <arg value="${RELEASE_DIR}/${binary.kit}.${extension}" /> - </exec> - </target> - - <target name="sign_exe" description="sign exe when on mac" > - <checksum file="${RELEASE_DIR}/${binary.kit}.exe" algorithm="md5" forceOverwrite="yes" /> - - <exec executable="gpg"> - <arg value="--armor" /> - <arg value="--output" /> - <arg value="${RELEASE_DIR}/${binary.kit}.exe.asc" /> - <arg value="--detach-sig" /> - <arg value="${RELEASE_DIR}/${binary.kit}.exe" /> - </exec> - </target> - - <target name="sign_dmg" description="sign dmg when on win" > - <checksum file="${RELEASE_DIR}/${binary.kit}.dmg" algorithm="md5" forceOverwrite="yes" /> - - <exec executable="gpg"> - <arg value="--armor" /> - <arg value="--output" /> - <arg value="${RELEASE_DIR}/${binary.kit}.dmg.asc" /> - <arg value="--detach-sig" /> - <arg value="${RELEASE_DIR}/${binary.kit}.dmg" /> - </exec> - </target> - - <target name="debug" > - <copy file="${SOURCE_DIR}/${APP_NAME}-app.xml" todir="${BUILD_DIR}" /> - <mkdir dir="${BUILD_DIR}/installer" /> - <exec executable="${AIR_HOME}/bin/${adl}" dir="${BUILD_DIR}" failonerror="true"> - <arg value="-runtime" /> - <arg value="${AIR_HOME}/runtimes/air/${runtime}" /> - <arg value="${BUILD_DIR}/${APP_NAME}-app.xml" /> - <arg value="--" /> - <arg value="-config=${LOCAL_CONFIG_URL}" /> - </exec> - </target> - - <target name="debug-locale" > - <copy file="${SOURCE_DIR}/${APP_NAME}-app.xml" todir="${BUILD_DIR}" /> - <mkdir dir="${BUILD_DIR}/installer" /> - <exec executable="${AIR_HOME}/bin/${adl}" dir="${BUILD_DIR}" failonerror="true"> - <arg value="-runtime" /> - <arg value="${AIR_HOME}/runtimes/air/${runtime}" /> - <arg value="${BUILD_DIR}/${APP_NAME}-app.xml" /> - <arg value="--" /> - <arg value="-config=${LOCAL_CONFIG_URL}" /> - <arg value="-language=${TEST_LOCALE}" /> - </exec> - </target> - - <target name="debug-for-real" > - <copy file="${SOURCE_DIR}/${APP_NAME}-app.xml" todir="${BUILD_DIR}" /> - <mkdir dir="${BUILD_DIR}/installer" /> - <exec executable="${AIR_HOME}/bin/${adl}" dir="${BUILD_DIR}" failonerror="true"> - <arg value="-runtime" /> - <arg value="${AIR_HOME}/runtimes/air/${runtime}" /> - <arg value="${BUILD_DIR}/${APP_NAME}-app.xml" /> - </exec> - </target> -</project> http://git-wip-us.apache.org/repos/asf/flex-utilities/blob/cda78507/installer/releasecandidate.xml ---------------------------------------------------------------------- diff --git a/installer/releasecandidate.xml b/installer/releasecandidate.xml deleted file mode 100644 index 3dca3d9..0000000 --- a/installer/releasecandidate.xml +++ /dev/null @@ -1,449 +0,0 @@ -<?xml version="1.0"?> -<!-- - - Licensed to the Apache Software Foundation (ASF) under one or more - contributor license agreements. See the NOTICE file distributed with - this work for additional information regarding copyright ownership. - The ASF licenses this file to You under the Apache License, Version 2.0 - (the "License"); you may not use this file except in compliance with - the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - ---> - -<project name="CreateInstallerReleaseCandidate" default="main" basedir="."> - - - <!-- Required for OSX 10.6 / Snow Leopard Performance. --> - <!-- Java 7 on Mac requires OSX 10.7.3 or higher and is 64-bit only --> - <!-- local.d32 is set/used in build.properties so this needs to be done first. --> - <condition property="local.d32" value="-d32"> - <and> - <os family="windows"/> - <equals arg1="${sun.arch.data.model}" arg2="64"/> - <equals arg1="${os.arch}" arg2="x86_64"/> - <equals arg1="${ant.java.version}" arg2="1.6"/> - </and> - </condition> - - <condition property="isMac" value="mac"> - <os family="mac" /> - </condition> - <condition property="isWindows" value="windows"> - <os family="windows" /> - </condition> - <condition property="isLinux" value="linux"> - <and> - <os family="unix" /> - <not> - <isset property="isMac" /> - </not> - </and> - </condition> - - <property name="rat.report" value="${basedir}/rat-report.txt"/> - <property name="apache.rat.jar" value="apache-rat-0.8.jar" /> - <property name="apache.rat.tasks.jar" value="apache-rat-tasks-0.8.jar" /> - <property name="apache.rat.url" value="http://people.apache.org/~aharui/rat"; /> - - <property file="${basedir}/local.properties" /> - <condition property="CERT_PASSWORD_FILE" value="${CERT_PASSWORD_FILE_WIN}" > - <and> - <not> - <available file="${CERT_PASSWORD_FILE}" /> - </not> - <available file="${CERT_PASSWORD_FILE_WIN}" /> - </and> - </condition> - <condition property="CERT_PASSWORD_FILE" value="${CERT_PASSWORD_FILE_MAC}" > - <and> - <not> - <available file="${CERT_PASSWORD_FILE}" /> - </not> - <available file="${CERT_PASSWORD_FILE_MAC}" /> - </and> - </condition> - <condition property="RELEASE_KEYSTORE_FILE" value="${RELEASE_KEYSTORE_FILE_WIN}" > - <and> - <not> - <available file="${RELEASE_KEYSTORE_FILE}" /> - </not> - <available file="${RELEASE_KEYSTORE_FILE_WIN}" /> - </and> - </condition> - <condition property="RELEASE_KEYSTORE_FILE" value="${RELEASE_KEYSTORE_FILE_MAC}" > - <and> - <not> - <available file="${RELEASE_KEYSTORE_FILE}" /> - </not> - <available file="${RELEASE_KEYSTORE_FILE_MAC}" /> - </and> - </condition> - <property file="${basedir}/build.properties" /> - <property file="${basedir}/build.number"/> - - <property environment="env"/> - - <condition property="do.copy.downloads" > - <isset property="download.cache.dir" /> - </condition> - - <condition property="CRLF" value="%0D%0A"> - <isset property="isWindows" /> - </condition> - <property name="CRLF" value="%0A" /> - - <fail message="The my.name property is not set to the RM's name" - unless="my.name"/> - - <fail message="The ANT_HOME environment variable is not set." - unless="env.ANT_HOME"/> - - <available file="${svn.dist.dev}" - type="dir" - property="dist.dev" value="${svn.dist.dev}" /> - - <fail message="The svn.dist.dev property is not set to the working copy for https://dist.apache.org/repos/dist/dev."; - unless="dist.dev"/> - - <available file="${env.AIR_HOME}" - type="dir" - property="AIR_HOME" value="${env.AIR_HOME}" /> - - <fail message="The AIR_HOME property is not set in environment or command-line." - unless="AIR_HOME"/> - - <available file="${env.PLAYERGLOBAL_HOME}" - type="dir" - property="PLAYERGLOBAL_HOME" value="${env.PLAYERGLOBAL_HOME}" /> - - <fail message="The PLAYERGLOBAL_HOME property is not set in environment or command-line." - unless="PLAYERGLOBAL_HOME"/> - - <available file="${env.FLASHPLAYER_DEBUGGER}" - type="dir" - property="FLASHPLAYER_DEBUGGER" value="${env.FLASHPLAYER_DEBUGGER}" /> - - <available file="${env.FLASHPLAYER_DEBUGGER}" - type="file" - property="FLASHPLAYER_DEBUGGER" value="${env.FLASHPLAYER_DEBUGGER}" /> - - <fail message="The FLASHPLAYER_DEBUGGER property is not set in environment or command-line." - unless="FLASHPLAYER_DEBUGGER"/> - - <available file="${env.ProgramFiles}/Mozilla Firefox/firefox.exe" - type="file" - property="browser" value="${env.ProgramFiles}/Mozilla Firefox/firefox.exe" /> - <available file="${env.ProgramFiles(x86)}/Mozilla Firefox/firefox.exe" - type="file" - property="browser" value="${env.ProgramFiles}/Mozilla Firefox/firefox.exe" /> - <available file="/Applications/Firefox.app/Contents/MacOS/firefox" - type="file" - property="browser" value="/Applications/Firefox.app/Contents/MacOS/firefox" /> - - <available file="${env.ANT_HOME}/lib/${apache.rat.jar}" - type="file" - property="apache.rat.found"/> - <available file="${env.ANT_HOME}/lib/${apache.rat.tasks.jar}" - type="file" - property="apache.rat.tasks.found"/> - - <fail message="Could not locate Firefox. Please specify a browser with - -Dbrowser=<path-to-browser>" - unless="browser"/> - - <available file="${env.ProgramFiles}/SlikSVN/bin/svn.exe" - type="file" - property="svn" value="${env.ProgramFiles}/SlikSVN/bin/svn.exe" /> - <available file="${env.ProgramFiles(x86)}/SlikSVN/bin/svn.exe" - type="file" - property="svn" value="${env.ProgramFiles}/SlikSVN/bin/svn.exe" /> - <available file="/opt/subversion/bin/svn" - type="file" - property="svn" value="/opt/subversion/bin/svn" /> - <fail message="Could not locate SVN command-line. Please specify the path to SVN with - -Dsvn=<path-to-svn>" - unless="svn"/> - - <available file="${env.ProgramFiles}/Git/bin/git.exe" - type="file" - property="git" value="${env.ProgramFiles}/Git/bin/git.exe" /> - <available file="${env.ProgramFiles(x86)}/Git/bin/git.exe" - type="file" - property="git" value="${env.ProgramFiles}/Git/bin/git.exe" /> - <available file="/usr/local/git/bin/git" - type="file" - property="git" value="/usr/local/git/bin/git" /> - <fail message="Could not locate Git command-line. Please specify the path to Git with - -Dgit=<path-to-git>" - unless="git"/> - - <available file="${env.ANT_HOME}/lib/${apache.rat.jar}" - type="file" - property="apache.rat.found"/> - <available file="${env.ANT_HOME}/lib/${apache.rat.tasks.jar}" - type="file" - property="apache.rat.tasks.found"/> - - <fail message="Could not locate Firefox. Please specify a browser with - -Dbrowser=<path-to-browser>" - unless="browser"/> - <fail message="The release candidate number is not set. Specify -Drc=<rc number (e.g. 1, 2, 3, etc)>" - unless="rc"/> - - <target name="install-rat" depends="install-rat.jar,install-rat.tasks.jar" /> - <target name="install-rat.jar" unless="apache.rat.found"> - <get src="${apache.rat.url}/${apache.rat.jar}" dest="${env.ANT_HOME}/lib/${apache.rat.jar}" /> - </target> - <target name="install-rat.tasks.jar" unless="apache.rat.tasks.found"> - <get src="${apache.rat.url}/${apache.rat.tasks.jar}" dest="${env.ANT_HOME}/lib/${apache.rat.tasks.jar}" /> - </target> - - <target name="rat-taskdef" description="Rat taskdef"> - <typedef resource="org/apache/rat/anttasks/antlib.xml" - uri="antlib:org.apache.rat.anttasks" - classpathref="anttask.classpath"/> - </target> - - <target name="main" depends="install-rat" description="Perform required release approval steps"> - <antcall target="check-new-version" /> - <antcall target="other-platform" /> - <exec executable="${git}" dir="${basedir}/.." failonerror="true" > - <arg value="pull" /> - <arg value="--rebase" /> - </exec> - <ant antfile="build.xml" target="release" /> - <mkdir dir="${dist.dev}/flex/installer/${release.version}/rc${rc}/binaries" /> - <copy todir="${dist.dev}/flex/installer/${release.version}/rc${rc}" > - <fileset dir="${basedir}/release" > - <include name="apache-flex-sdk-installer-${release.version}.${build.number}-src*" /> - </fileset> - </copy> - <copy todir="${dist.dev}/flex/installer/${release.version}/rc${rc}/binaries" > - <fileset dir="${basedir}/release" > - <include name="apache-flex-sdk-installer-${release.version}.${build.number}-bin*" /> - </fileset> - </copy> - <copy file="${basedir}/README" tofile="${dist.dev}/flex/installer/${release.version}/rc${rc}/READme" /> - <copy file="${basedir}/ApproveInstaller.xml" tofile="${dist.dev}/flex/installer/${release.version}/rc${rc}/ApproveInstaller.xml" /> - <exec executable="${svn}" dir="${dist.dev}/flex/installer" failonerror="true" > - <arg value="add" /> - <arg value="${dist.dev}/flex/installer/${release.version}/rc${rc}" /> - </exec> - <exec executable="${svn}" dir="${dist.dev}/flex/installer" failonerror="true" > - <arg value="commit" /> - <arg value="--force-interactive" /> - <arg value="-m" /> - <arg value="rc${rc} of Apache Flex Installer ${release.version}" /> - </exec> - <exec executable="${git}" dir="${basedir}/.." failonerror="true" > - <arg value="tag" /> - <arg value="-a" /> - <arg value="apache-flex-sdk-installer-${release.version}-rc${rc}" /> - <arg value="-m" /> - <arg value=""rc${rc} of apache-flex-sdk-installer-${release.version}"" /> - </exec> - <exec executable="${git}" dir="${basedir}/.." failonerror="true" > - <arg value="push" /> - <arg value="--tags" /> - </exec> - <antcall target="mail" /> - </target> - - <target name="check-new-version" description="check if svn folder needs to be added" > - <condition property="version.folder" value="${dist.dev}/flex/installer/${release.version}" > - <not> - <available file="${dist.dev}/flex/installer/${release.version}" /> - </not> - </condition> - <antcall target="add-version-folder" /> - </target> - - <target name="add-version-folder" description="adds svn folder if needed" if="version.folder" > - <mkdir dir="${version.folder}" /> - <exec executable="${svn}" dir="${dist.dev}/flex/installer" failonerror="true" > - <arg value="add" /> - <arg value="${version.folder}" /> - </exec> - </target> - - <target name="other-platform" depends="other-platform-mac, other-platform-win" unless="skip.other.platform" > - </target> - <target name="other-platform-mac" if="isMac" > - <available file="${basedir}/release/apache-flex-sdk-installer-${release.version}.${build.number}-bin.exe" - type="file" property="other.binary" /> - <fail message="${basedir}/release/apache-flex-sdk-installer-${release.version}.${build.number}-bin.exe not found. The windows version should be built before running this script" - unless="other.binary"/> - <ant antfile="build.xml" target="sign_exe" /> - <mkdir dir="${dist.dev}/flex/installer/${release.version}/rc${rc}/binaries" /> - <copy todir="${dist.dev}/flex/installer/${release.version}/rc${rc}/binaries" > - <fileset dir="${basedir}/release" > - <include name="apache-flex-sdk-installer-${release.version}.${build.number}-bin*" /> - </fileset> - </copy> - </target> - <target name="other-platform-win" if="isWindows" > - <available file="${basedir}/release/apache-flex-sdk-installer-${release.version}.${build.number}-bin.dmg" - type="file" property="other.binary" /> - <fail message="${basedir}/release/apache-flex-sdk-installer-${release.version}.${build.number}-bin.dmg not found. The windows version should be built before running this script" - unless="other.binary"/> - <ant antfile="build.xml" target="sign_dmg" /> - <mkdir dir="${dist.dev}/flex/installer/${release.version}/rc${rc}/binaries" /> - <copy todir="${dist.dev}/flex/installer/${release.version}/rc${rc}/binaries" > - <fileset dir="${basedir}/release" > - <include name="apache-flex-sdk-installer-${release.version}.${build.number}-bin*" /> - </fileset> - </copy> - </target> - - <target name="mail" > - <!-- try to set line breaks before the vertical line | --> - <echo file="${basedir}/discussthread.properties">discuss.thread.body=This is the discussion thread.\n\ -\n\ -Changes in this RC include:\n\ -\n\ -\n\ -Thanks,\n\ -${my.name} -</echo> - <replace file="${basedir}/discussthread.properties"> - <replacefilter token=" " value="%20" /> - <replacefilter token="\n" value="${CRLF}" /> - </replace> - <property file="${basedir}/discussthread.properties" /> - - <!-- try to set line breaks before the vertical line | --> - <echo file="${basedir}/votethread.properties">vote.thread.body=Hi,\n\ -\n\ -Please vote to approve Apache Flex SDK Installer version ${release.version} to be \n\ -released.\n\ -\n\ -The source distributions for Windows and Mac are available here:\n\ -https://dist.apache.org/repos/dist/dev/flex/installer/${release.version}/rc${rc}/\n\ -\n\ -The binary distributions as a convenience for the respective platforms,\n\ -are available here:\n\ -https://dist.apache.org/repos/dist/dev/flex/installer/${release.version}/rc${rc}/binaries\n\ -\n\ -As agreed, there are no Linux binaries for this version.\n\ -\n\ -Before voting please review the sections:\n\ -What are the ASF requirements on approving a release? at\n\ -http://www.apache.org/dev/ and approving a release at\n\ -http://www.apache.org/dev/release.html#approving-a-release\n\ -\n\ -For your convenience, there is an Ant script in the RC folder that\n\ -automates the checks a voter should perform on the RC.\n\ -It will:\n\ - - download the default source package for your OS (use -Dpackage.suffix to override)\n\ - - run md5 and gpg checks (this assumes you have gpg installed in your path)\n\ - - uncompress the source package\n\ - - install and run rat\n\ - - display the rat report and ask you to verify\n\ - - display the rat report without the AL files and ask you to verify the non-AL files\n\ - - display the README and ask you to verify\n\ - - display the RELEASE_NOTES and ask you to verify\n\ - - display the NOTICE and ask you to verify\n\ - - display the LICENSE and ask you to verify\n\ - - run the build and any tests run by the build.\n\ -\n\ -\n\ -You should be able to go away for a while during the build. When it is\n\ -finished, it will display information to be copied into the vote thread.\n\ -You are not required to use this script, and more testing of the packages\n\ -and build results are always encouraged.\n\ -\n\ -\n\ -To use this script (assuming you have Ant installed), it should be as\n\ -simple as:\n\ -- Create an empty folder\n\ -- Download ApproveInstaller.xml into that folder from:\n\ -\n\ -https://dist.apache.org/repos/dist/dev/flex/installer/${release.version}/rc${rc}/ApproveInstaller.xml\n\ -\n\ -- Run: ant -e -f ApproveInstaller.xml -Drelease.version=${release.version} -Drc=${rc}\n\ -\n\ -\n\ -Vote\n\ -[ ] +1 Approve the release\n\ -[ ] -1 Veto the release (please provide specific comments)\n\ -\n\ -This vote will be open for at least 72 hours.\n\ -\n\ -Thanks,\n\ -${my.name} -</echo> - <replace file="${basedir}/votethread.properties"> - <replacefilter token=" " value="%20" /> - <replacefilter token="\n" value="${CRLF}" /> - </replace> - <property file="${basedir}/votethread.properties" /> - <echo file="${basedir}/votethread.html"><html><body><a href="mailto:[email protected]?subject=[DISCUSS]%20Discuss%20Release%20Apache%20Flex%20SDK%20Installer%20${release.version}%20RC${rc}&body=${discuss.thread.body}">Click here to review discuss thread</a><br/><a href="mailto:[email protected]?subject=[VOTE]%20Release%20Apache%20Flex%20SDK%20Installer%20${release.version}%20RC${rc}&body=${vote.thread.body}">Click here to review vote thread</a></body></html></echo> - <makeurl file="${basedir}/votethread.html" property="vote.thread.url" /> - <exec executable="${browser}"> - <arg value="${vote.thread.url}" /> - </exec> - <delete file="${basedir}/votethread.properties" /> - <delete file="${basedir}/votethread.html" /> - <delete file="${basedir}/discussthread.properties" /> - </target> - - <target name="release" > - <available file="${svn.dist.release}" - type="dir" - property="dist.release" value="${svn.dist.release}" /> - - <fail message="The svn.dist.release property is not set to the working copy for https://dist.apache.org/repos/dist/release."; - unless="dist.release"/> - - <exec executable="${svn}" dir="${dist.release}/flex" failonerror="true" > - <arg value="update" /> - </exec> - <mkdir dir="${dist.release}/flex/installer/${release.version}" /> - <mkdir dir="${dist.release}/flex/installer/${release.version}/binaries" /> - <copy todir="${dist.release}/flex/installer/${release.version}/binaries" > - <fileset dir="${dist.dev}/flex/installer/rc${rc}/binaries" > - <include name="apache-flex-sdk-installer-${release.version}.${build.number}-bin*" /> - </fileset> - </copy> - <copy todir="${dist.release}/flex/installer/${release.version}" > - <fileset dir="${dist.dev}/flex/installer/rc${rc}" > - <include name="READme" /> - <include name="apache-flex-sdk-installer-${release.version}.${build.number}-src*" /> - </fileset> - </copy> - <exec executable="${svn}" dir="${dist.release}/flex/installer" failonerror="true" > - <arg value="add" /> - <arg value="${release.version}" /> - </exec> - <exec executable="${svn}" dir="${dist.release}/flex/installer" failonerror="true" > - <arg value="commit" /> - <arg value="--username" /> - <arg value="${apache.username}" /> - <arg value="--password" /> - <arg value="${apache.password}" /> - <arg value="-m" /> - <arg value="Apache Flex SDK Installer ${release.version}" /> - </exec> - <exec executable="${git}" dir="${basedir}" failonerror="true" > - <arg value="tag" /> - <arg value="-a" /> - <arg value="apache-flex-sdk-installer-${release.version}.${build.number}" /> - <arg value="-m" /> - <arg value=""Official release of apache-flex-sdk-installer-${release.version}.${build.number}"" /> - </exec> - <exec executable="${git}" dir="${basedir}" failonerror="true" > - <arg value="push" /> - <arg value="--tags" /> - </exec> - <echo>Wait at least 24 hours before updating sdk-installer-config-4.0.xml and installer page on website</echo> - </target> - -</project> http://git-wip-us.apache.org/repos/asf/flex-utilities/blob/cda78507/installer/sign_and_hash.sh ---------------------------------------------------------------------- diff --git a/installer/sign_and_hash.sh b/installer/sign_and_hash.sh deleted file mode 100644 index 0e2d3c2..0000000 --- a/installer/sign_and_hash.sh +++ /dev/null @@ -1,56 +0,0 @@ -#!/bin/sh -#------------------------------------------------------------------------------ -# Copyright 2004 The Apache Software Foundation -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -#------------------------------------------------------------------------------ -# $Id$ -# -# Creates detached ascii signatures and md5 hashes for each of the files in the -# current directory. -# -# Also verifies the signatures. -# -# For each file in the current directory, two new files are created: -# -# <name>.asc -- ascii-armored detached PGP digital signature -# <name>.md5 -- md5 hash (checksum) -# -# where <name> is the name of the file, not including file path. -# -# For example, foo-1.0-src.tar.gz in the current directory will result in -# foo-1.0-src.tar.gz.asc and foo-1.0-src.tar.gz.md5 added to the current -# directory. -# -# Deletes any .asc or .md5 files in the current directory before processing -# and does NOT recurse subdirectories. -# -# Assumes that you have a pgp id and keypair set up and prompts for the -# passphrase for each signature created. -# -# usage: -# sign_and_hash.sh -# -# requires: -# gpg -# md5sum -#------------------------------------------------------------------------------ -rm -f *.asc -rm -f *.md5 -for file in *; do - if [ -f "$file" ]; then - gpg --print-md MD5 $file > ${file}.md5 - gpg --armor --output ${file}.asc --detach-sig $file - gpg --verify ${file}.asc $file - fi -done http://git-wip-us.apache.org/repos/asf/flex-utilities/blob/cda78507/installer/src/InstallApacheFlex-app.xml ---------------------------------------------------------------------- diff --git a/installer/src/InstallApacheFlex-app.xml b/installer/src/InstallApacheFlex-app.xml deleted file mode 100755 index 79ff410..0000000 --- a/installer/src/InstallApacheFlex-app.xml +++ /dev/null @@ -1,252 +0,0 @@ -<?xml version="1.0" encoding="utf-8" standalone="no"?> -<!-- - - Licensed to the Apache Software Foundation (ASF) under one or more - contributor license agreements. See the NOTICE file distributed with - this work for additional information regarding copyright ownership. - The ASF licenses this file to You under the Apache License, Version 2.0 - (the "License"); you may not use this file except in compliance with - the License. You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - ---> -<application xmlns="http://ns.adobe.com/air/application/4.0";> - -<!-- Adobe AIR Application Descriptor File Template. - - Specifies parameters for identifying, installing, and launching AIR applications. - - xmlns - The Adobe AIR namespace: http://ns.adobe.com/air/application/3.8 - The last segment of the namespace specifies the version - of the AIR runtime required for this application to run. - - minimumPatchLevel - The minimum patch level of the AIR runtime required to run - the application. Optional. ---> - - <!-- A universally unique application identifier. Must be unique across all AIR applications. - Using a reverse DNS-style name as the id is recommended. (Eg. com.example.ExampleApplication.) Required. --> - <id>org.apache.flex.installapacheflex</id> - - <!-- Used as the filename for the application. Required. --> - <filename>Apache Flex SDK Installer</filename> - - <!-- The name that is displayed in the AIR application installer. - May have multiple values for each language. See samples or xsd schema file. Optional. --> - <name>Apache Flex SDK Installer</name> - - <!-- A string value of the format <0-999>.<0-999>.<0-999> that represents application version which can be used to check for application upgrade. - Values can also be 1-part or 2-part. It is not necessary to have a 3-part value. - An updated version of application must have a versionNumber value higher than the previous version. Required for namespace >= 2.5 . --> - <versionNumber>3.2.0</versionNumber> - - <!-- A string value (such as "v1", "2.5", or "Alpha 1") that represents the version of the application, as it should be shown to users. Optional. --> - <!-- <versionLabel></versionLabel> --> - - <!-- Description, displayed in the AIR application installer. - May have multiple values for each language. See samples or xsd schema file. Optional. --> - <!-- <description></description> --> - - <!-- Copyright information. Optional --> - <copyright>Copyright 2014 The Apache Software Foundation.</copyright> - - <!-- Publisher ID. Used if you're updating an application created prior to 1.5.3 --> - <!-- <publisherID></publisherID> --> - - <!-- Settings for the application's initial window. Required. --> - <initialWindow> - <!-- The main SWF or HTML file of the application. Required. --> - <!-- Note: In Flash Builder, the SWF reference is set automatically. --> - <content>InstallApacheFlex.swf</content> - - <!-- The title of the main window. Optional. --> - <!-- <title></title> --> - - <!-- The type of system chrome to use (either "standard" or "none"). Optional. Default standard. --> - <!-- <systemChrome></systemChrome> --> - - <!-- Whether the window is transparent. Only applicable when systemChrome is none. Optional. Default false. --> - <!-- <transparent></transparent> --> - - <!-- Whether the window is initially visible. Optional. Default false. --> - <!-- <visible></visible> --> - - <!-- Whether the user can minimize the window. Optional. Default true. --> - <!-- <minimizable></minimizable> --> - - <!-- Whether the user can maximize the window. Optional. Default true. --> - <!-- <maximizable></maximizable> --> - - <!-- Whether the user can resize the window. Optional. Default true. --> - <!-- <resizable></resizable> --> - - <!-- The window's initial width in pixels. Optional. --> - <!-- <width></width> --> - - <!-- The window's initial height in pixels. Optional. --> - <!-- <height></height> --> - - <!-- The window's initial x position. Optional. --> - <!-- <x></x> --> - - <!-- The window's initial y position. Optional. --> - <!-- <y></y> --> - - <!-- The window's minimum size, specified as a width/height pair in pixels, such as "400 200". Optional. --> - <!-- <minSize></minSize> --> - - <!-- The window's initial maximum size, specified as a width/height pair in pixels, such as "1600 1200". Optional. --> - <!-- <maxSize></maxSize> --> - - <!-- The initial aspect ratio of the app when launched (either "portrait" or "landscape"). Optional. Mobile only. Default is the natural orientation of the device --> - - <!-- <aspectRatio></aspectRatio> --> - - <!-- Whether the app will begin auto-orienting on launch. Optional. Mobile only. Default false --> - - <!-- <autoOrients></autoOrients> --> - - <!-- Whether the app launches in full screen. Optional. Mobile only. Default false --> - - <!-- <fullScreen></fullScreen> --> - - <!-- The render mode for the app (either auto, cpu, gpu, or direct). Optional. Default auto --> - - <!-- <renderMode></renderMode> --> - - <!-- Whether or not to pan when a soft keyboard is raised or lowered (either "pan" or "none"). Optional. Defaults "pan." --> - <!-- <softKeyboardBehavior></softKeyboardBehavior> --> - <autoOrients>false</autoOrients> - <fullScreen>false</fullScreen> - <visible>false</visible> - </initialWindow> - - <!-- We recommend omitting the supportedProfiles element, --> - <!-- which in turn permits your application to be deployed to all --> - <!-- devices supported by AIR. If you wish to restrict deployment --> - <!-- (i.e., to only mobile devices) then add this element and list --> - <!-- only the profiles which your application does support. --> - <!-- <supportedProfiles>desktop extendedDesktop mobileDevice extendedMobileDevice</supportedProfiles> --> - <supportedProfiles>extendedDesktop desktop</supportedProfiles> - - <!-- The subpath of the standard default installation location to use. Optional. --> - <installFolder>Apache Flex</installFolder> - - <!-- The subpath of the Programs menu to use. (Ignored on operating systems without a Programs menu.) Optional. --> - <programMenuFolder>Apache Flex</programMenuFolder> - - <!-- The icon the system uses for the application. For at least one resolution, - specify the path to a PNG file included in the AIR package. Optional. --> - <icon> - <image16x16>assets/icons/16.png</image16x16> - <image29x29>assets/icons/29.png</image29x29> - <image32x32>assets/icons/32.png</image32x32> - <image36x36>assets/icons/36.png</image36x36> - <image48x48>assets/icons/48.png</image48x48> - <image57x57>assets/icons/57.png</image57x57> - <image72x72>assets/icons/72.png</image72x72> - <image114x114>assets/icons/114.png</image114x114> - <image128x128>assets/icons/128.png</image128x128> - </icon> - - <!-- Whether the application handles the update when a user double-clicks an update version - of the AIR file (true), or the default AIR application installer handles the update (false). - Optional. Default false. --> - <!-- <customUpdateUI></customUpdateUI> --> - - <!-- Whether the application can be launched when the user clicks a link in a web browser. - Optional. Default false. --> - <!-- <allowBrowserInvocation></allowBrowserInvocation> --> - - <!-- Listing of file types for which the application can register. Optional. --> - <!-- <fileTypes> --> - - <!-- Defines one file type. Optional. --> - <!-- <fileType> --> - - <!-- The name that the system displays for the registered file type. Required. --> - <!-- <name></name> --> - - <!-- The extension to register. Required. --> - <!-- <extension></extension> --> - - <!-- The description of the file type. Optional. --> - <!-- <description></description> --> - - <!-- The MIME content type. --> - <!-- <contentType></contentType> --> - - <!-- The icon to display for the file type. Optional. --> - <!-- <icon> - <image16x16></image16x16> - <image32x32></image32x32> - <image48x48></image48x48> - <image128x128></image128x128> - </icon> --> - - <!-- </fileType> --> - <!-- </fileTypes> --> - - <!-- iOS specific capabilities --> - <!-- <iPhone> --> - <!-- A list of plist key/value pairs to be added to the application Info.plist --> - <!-- <InfoAdditions> - <![CDATA[ - <key>UIDeviceFamily</key> - <array> - <string>1</string> - <string>2</string> - </array> - <key>UIStatusBarStyle</key> - <string>UIStatusBarStyleBlackOpaque</string> - <key>UIRequiresPersistentWiFi</key> - <string>YES</string> - ]]> - </InfoAdditions> --> - <!-- A list of plist key/value pairs to be added to the application Entitlements.plist --> - <!-- <Entitlements> - <![CDATA[ - <key>keychain-access-groups</key> - <array> - <string></string> - <string></string> - </array> - ]]> - </Entitlements> --> - <!-- Display Resolution for the app (either "standard" or "high"). Optional. Default "standard" --> - <!-- <requestedDisplayResolution></requestedDisplayResolution> --> - <!-- </iPhone> --> - - <!-- Specify Android specific tags that get passed to AndroidManifest.xml file. --> - <!--<android> --> - <!-- <manifestAdditions> - <![CDATA[ - <manifest android:installLocation="auto"> - <uses-permission android:name="android.permission.INTERNET"/> - <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE"/> - <uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"/> - <uses-feature android:required="true" android:name="android.hardware.touchscreen.multitouch"/> - <application android:enabled="true"> - <activity android:excludeFromRecents="false"> - <intent-filter> - <action android:name="android.intent.action.MAIN"/> - <category android:name="android.intent.category.LAUNCHER"/> - </intent-filter> - </activity> - </application> - </manifest> - ]]> - </manifestAdditions> --> - <!-- Color depth for the app (either "32bit" or "16bit"). Optional. Default 16bit before namespace 3.0, 32bit after --> - <!-- <colorDepth></colorDepth> --> - <!-- </android> --> - <!-- End of the schema for adding the android specific tags in AndroidManifest.xml file --> - -</application>
