Author: piotrz
Date: Sun Nov 12 20:17:41 2017
New Revision: 23070
Log:
Add Apache Flex SDK RC3
Added:
dev/flex/installer/3.3/rc3/
dev/flex/installer/3.3/rc3/ApproveInstaller.xml
dev/flex/installer/3.3/rc3/READme
dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz
(with props)
dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz.asc
dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz.md5
dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip (with
props)
dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip.asc
dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip.md5
dev/flex/installer/3.3/rc3/binaries/
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg
(with props)
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg.asc
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg.md5
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe
(with props)
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe.asc
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe.md5
Added: dev/flex/installer/3.3/rc3/ApproveInstaller.xml
==============================================================================
--- dev/flex/installer/3.3/rc3/ApproveInstaller.xml (added)
+++ dev/flex/installer/3.3/rc3/ApproveInstaller.xml Sun Nov 12 20:17:41 2017
@@ -0,0 +1,383 @@
+<?xml version="1.0"?>
+<!--
+
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+-->
+
+<project name="ApproveApacheFlexInstaller" default="main" basedir=".">
+
+
+ <!-- Required for OSX 10.6 / Snow Leopard Performance. -->
+ <!-- Java 7 on Mac requires OSX 10.7.3 or higher and is 64-bit only -->
+ <!-- local.d32 is set/used in build.properties so this needs to be done
first. -->
+ <condition property="local.d32" value="-d32">
+ <and>
+ <os family="windows"/>
+ <equals arg1="${sun.arch.data.model}" arg2="64"/>
+ <equals arg1="${os.arch}" arg2="x86_64"/>
+ <equals arg1="${ant.java.version}" arg2="1.6"/>
+ </and>
+ </condition>
+
+ <condition property="isMac" value="mac">
+ <os family="mac" />
+ </condition>
+ <condition property="isWindows" value="windows">
+ <os family="windows" />
+ </condition>
+ <condition property="isLinux" value="linux">
+ <and>
+ <os family="unix" />
+ <not>
+ <isset property="isMac" />
+ </not>
+ </and>
+ </condition>
+ <condition property="package.suffix" value="zip">
+ <os family="windows" />
+ </condition>
+ <property name="package.suffix" value="tar.gz" />
+
+ <property name="rat.report" value="${basedir}/rat-report.txt"/>
+ <property name="apache.rat.jar" value="apache-rat-0.11.jar" />
+ <property name="apache.rat.tasks.jar" value="apache-rat-tasks-0.11.jar" />
+ <property name="apache.rat.url"
value="http://search.maven.org/remotecontent?filepath=org/apache/rat/apache-rat/0.11";
/>
+ <property name="apache.rat.tasks.url"
value="http://search.maven.org/remotecontent?filepath=org/apache/rat/apache-rat-tasks/0.11";
/>
+
+ <property name="mac.text.display" value="cat" />
+ <property name="win.text.display" value="type" />
+ <property name="linux.text.display" value="cat" />
+
+ <property file="${basedir}/approveinstaller.properties"/>
+ <property environment="env"/>
+
+ <property name="build.target" value="main" />
+
+ <condition property="do.copy.downloads" >
+ <isset property="download.cache.dir" />
+ </condition>
+
+ <fail message="The ANT_HOME environment variable is not set."
+ unless="env.ANT_HOME"/>
+
+ <available file="${env.FLEX_HOME}"
+ type="dir"
+ property="FLEX_HOME" value="${env.FLEX_HOME}" />
+
+ <fail message="The FLEX_HOME property is not set in environment or
command-line."
+ unless="FLEX_HOME"/>
+
+ <available file="${env.AIR_HOME}"
+ type="dir"
+ property="AIR_HOME" value="${env.AIR_HOME}" />
+
+ <fail message="The AIR_HOME property is not set in environment or
command-line."
+ unless="AIR_HOME"/>
+
+ <available file="${env.ANT_HOME}/lib/${apache.rat.jar}"
+ type="file"
+ property="apache.rat.found"/>
+ <available file="${env.ANT_HOME}/lib/${apache.rat.tasks.jar}"
+ type="file"
+ property="apache.rat.tasks.found"/>
+
+ <fail message="The release version is not set. Specify
-Drelease.version=<release version (e.g. 3.1, 3.2, etc)>"
+ unless="release.version"/>
+
+ <condition property="package.url.path"
+
value="http://apacheflexbuild.cloudapp.net:8080/job/flex-sdk_installer_release-candidate/lastSuccessfulBuild/artifact/out";>
+ <not>
+ <isset property="rc" />
+ </not>
+ </condition>
+
+ <property name="package.url.path"
value="https://dist.apache.org/repos/dist/dev/flex/installer/${release.version}/rc${rc}";
/>
+ <property name="package.url.name"
value="apache-flex-sdk-installer-${release.version}.0-src" />
+
+ <condition property="zip.compressed">
+ <equals arg1="zip" arg2="${package.suffix}" />
+ </condition>
+
+ <target name="display-text-mac" if="isMac">
+ <echo>========================= Begin ${file}
==============================</echo>
+ <exec executable="${mac.text.display}" >
+ <arg value="${file}" />
+ </exec>
+ <echo>========================= End ${file}
==============================</echo>
+ </target>
+ <target name="display-text-win" if="isWindows">
+ <pathconvert targetos="windows" property="winfile">
+ <path path="${file}" />
+ </pathconvert>
+ <echo>========================= Begin ${winfile}
==============================</echo>
+ <exec executable="cmd.exe" >
+ <arg value="/c" />
+ <arg value="${win.text.display}" />
+ <arg value="${winfile}" />
+ </exec>
+ <echo>========================= End ${winfile}
==============================</echo>
+ </target>
+ <target name="display-text-linux" if="isLinux">
+ <echo>========================= Begin ${file}
==============================</echo>
+ <exec executable="${linux.text.display}" >
+ <arg value="${file}" />
+ </exec>
+ <echo>========================= End ${file}
==============================</echo>
+ </target>
+
+ <target name="install-rat"
depends="install-rat.jar,install-rat.tasks.jar" />
+ <target name="install-rat.jar" unless="apache.rat.found">
+ <get src="${apache.rat.url}/${apache.rat.jar}"
dest="${env.ANT_HOME}/lib/${apache.rat.jar}" />
+ </target>
+ <target name="install-rat.tasks.jar" unless="apache.rat.tasks.found">
+ <get src="${apache.rat.url}/${apache.rat.tasks.jar}"
dest="${env.ANT_HOME}/lib/${apache.rat.tasks.jar}" />
+ </target>
+
+ <target name="rat-taskdef" description="Rat taskdef">
+ <typedef resource="org/apache/rat/anttasks/antlib.xml"
+ uri="antlib:org.apache.rat.anttasks"
+ classpathref="anttask.classpath"/>
+ </target>
+
+ <target name="main"
depends="install-rat,download,check-sigs,uncompress,rat-check,check-notices,build,approve"
description="Perform required release approval steps">
+ </target>
+
+ <target name="main-no-download"
depends="install-rat,check-sigs,uncompress,rat-check,check-notices,build,approve"
description="Perform required release approval steps">
+ </target>
+
+ <target name="test" >
+ <echo>${rat.report}.bin.txt</echo>
+ <replaceregexp file="${rat.report}.bin.txt" match="..AL.*"
replace="" byline="true"/>
+ </target>
+
+ <target name="display-text" >
+ <antcall target="display-text-mac" />
+ <antcall target="display-text-win" />
+ <antcall target="display-text-linux" />
+ </target>
+
+ <target name="display-text-test" >
+ <antcall target="display-text" >
+ <param name="file" value="${basedir}/rat-report.txt" />
+ </antcall>
+ </target>
+
+ <target name="download" description="download the release package">
+ <get src="${package.url.path}/${package.url.name}.${package.suffix}"
+ dest="${basedir}/${package.url.name}.${package.suffix}" />
+ <get
src="${package.url.path}/${package.url.name}.${package.suffix}.md5"
+ dest="${basedir}/${package.url.name}.${package.suffix}.md5" />
+ <antcall target="asc_get" />
+ </target>
+
+ <target name="asc_get" if="rc" >
+ <get
src="${package.url.path}/${package.url.name}.${package.suffix}.asc"
+ dest="${basedir}/${package.url.name}.${package.suffix}.asc" />
+ </target>
+
+ <target name="check-sigs" description="check md5 and gpg sigs">
+ <replace
file="${basedir}/${package.url.name}.${package.suffix}.md5"
+ token=" " />
+ <checksum
file="${basedir}/${package.url.name}.${package.suffix}" algorithm="md5"
verifyproperty="md5.ok" />
+ <condition property="MD5Invalid">
+ <not>
+ <equals arg1="${md5.ok}" arg2="true" />
+ </not>
+ </condition>
+ <fail message="MD5 checksum did not match" if="MD5Invalid" />
+ <echo>rc is ${rc}</echo>
+ <antcall target="gpg_check" />
+ </target>
+
+ <target name="gpg_check" if="rc">
+ <exec executable="gpg" failonerror="true">
+ <arg value="--verify" />
+ <arg value="${basedir}/${package.url.name}.${package.suffix}.asc"
/>
+ <arg value="${basedir}/${package.url.name}.${package.suffix}" />
+ </exec>
+ </target>
+
+ <target name="uncompress" depends="pre-clean, untar-file, unzip-file" />
+
+ <target name="pre-clean" description="remove old uncompressed package" >
+ <delete dir="${basedir}/${package.url.name}"
failonerror="false" />
+ </target>
+
+ <target name="untar-file" unless="zip.compressed" description="Untars
zipFile">
+ <untar src="${basedir}/${package.url.name}.${package.suffix}"
+ dest="${basedir}/${package.url.name}" compression="gzip"/>
+ </target>
+
+ <target name="unzip-file" if="zip.compressed" description="Unzips zipFile">
+ <unzip src="${basedir}/${package.url.name}.${package.suffix}"
+ dest="${basedir}/${package.url.name}"/>
+ </target>
+
+ <target name="rat-check" >
+
+ <echo message="Checking files at ${basedir}/${package.url.name},
report is ${rat.report}"/>
+
+ <rat:report xmlns:rat="antlib:org.apache.rat.anttasks"
+ reportFile="${rat.report}">
+ <fileset dir="${basedir}/${package.url.name}">
+ <!-- exclude media (png, gif, jpg, mp3, flv) -->
+ <exclude name="**/*.png"/>
+ <exclude name="**/*.gif"/>
+ <exclude name="**/*.jpg"/>
+ <exclude name="**/*.mp3"/>
+ <exclude name="**/*.flv"/>
+ <exclude name="build.number"/>
+ <exclude name="CONTRIBUTING"/>
+ <exclude name="CONTRIBUTORS"/>
+ </fileset>
+ </rat:report>
+ <antcall target="display-text" >
+ <param name="file" value="${rat.report}" />
+ </antcall>
+ <input
+ message="Check that there are no unknown or unapproved
licenses or archives. Is it ok?"
+ validargs="y,n"
+ defaultvalue="y"
+ addproperty="rat.license.ok"/>
+ <echo>filtering out AL files to make it easier to see binary
files</echo>
+ <copy file="${rat.report}" tofile="${rat.report}.bin.txt" />
+ <replaceregexp file="${rat.report}.bin.txt" match="..AL.*"
replace="" byline="true"/>
+ <antcall target="display-text" >
+ <param name="file" value="${rat.report}.bin.txt" />
+ </antcall>
+ <input
+ message="Check that there are no unexpected binaries.
Is it ok?"
+ validargs="y,n"
+ defaultvalue="n"
+ addproperty="rat.binaries.ok"/>
+ </target>
+
+ <target name="check-notices" description="open each notice file for
review, grep for a few things" >
+ <fail message="README not in package">
+ <condition>
+ <not>
+ <available file="${basedir}/${package.url.name}/README" />
+ </not>
+ </condition>
+ </fail>
+ <fail message="RELEASE_NOTES not in package">
+ <condition>
+ <not>
+ <available
file="${basedir}/${package.url.name}/RELEASE_NOTES" />
+ </not>
+ </condition>
+ </fail>
+ <fail message="NOTICE not in package">
+ <condition>
+ <not>
+ <available
file="${basedir}/${package.url.name}/NOTICE" />
+ </not>
+ </condition>
+ </fail>
+ <fail message="LICENSE not in package">
+ <condition>
+ <not>
+ <available
file="${basedir}/${package.url.name}/LICENSE" />
+ </not>
+ </condition>
+ </fail>
+ <antcall target="display-text" >
+ <param name="file" value="${basedir}/${package.url.name}/README" />
+ </antcall>
+ <input
+ message="Check the README for version numbers,
spelling, grammar, accuracy. Is it ok?"
+ validargs="y,n"
+ defaultvalue="y"
+ addproperty="readme.ok"/>
+
+ <antcall target="display-text" >
+ <param name="file"
value="${basedir}/${package.url.name}/RELEASE_NOTES" />
+ </antcall>
+ <input
+ message="Check the RELEASE_NOTES for copyright years,
spelling, grammar, accuracy. Is it ok?"
+ validargs="y,n"
+ defaultvalue="y"
+ addproperty="releasenotes.ok"/>
+
+ <antcall target="display-text" >
+ <param name="file" value="${basedir}/${package.url.name}/NOTICE" />
+ </antcall>
+ <input
+ message="Check the NOTICE for required notices from
third-parties. Is it ok?"
+ validargs="y,n"
+ defaultvalue="y"
+ addproperty="notice.ok"/>
+
+ <antcall target="display-text" >
+ <param name="file" value="${basedir}/${package.url.name}/LICENSE"
/>
+ </antcall>
+ <input
+ message="Check the LICENSE for the Apache License and
third-party licenses. Is it ok?"
+ validargs="y,n"
+ defaultvalue="y"
+ addproperty="license.ok"/>
+ </target>
+
+ <target name="build" depends="copy.downloads">
+ <input
+ message="The final step is to run the build and any
tests the build script runs. This can take several minutes. Press y to start
the build."
+ validargs="y"
+ defaultvalue="y" />
+ <ant dir="${basedir}/${package.url.name}/ant_on_air" target="main" />
+ <ant dir="${basedir}/${package.url.name}" target="build" />
+ </target>
+
+ <target name="copy.downloads" if="${do.copy.downloads}"
description="instead of actually downloading all of the dependencies, you can
save lots of time by just copying from some other folder in some other SDK.">
+ <echo>Copying downloads</echo>
+ <copy todir="${basedir}/${package.url.name}/in" >
+ <fileset dir="${download.cache.dir}" />
+ </copy>
+ </target>
+
+ <target name="approve" >
+ <condition property="vote" value="+1">
+ <and>
+ <equals arg1="${rat.license.ok}" arg2="y" />
+ <equals arg1="${rat.binaries.ok}" arg2="y" />
+ <equals arg1="${readme.ok}" arg2="y" />
+ <equals arg1="${releasenotes.ok}" arg2="y" />
+ <equals arg1="${notice.ok}" arg2="y" />
+ <equals arg1="${license.ok}" arg2="y" />
+ </and>
+ </condition>
+ <property name="vote" value="-1" />
+ <echo>
+${vote}
+Package ${package.url.path}/${package.url.name}.${package.suffix}
+Java ${ant.java.version}
+OS: ${os.name} ${os.arch} ${os.version}
+Source kit signatures match: y
+Source kit builds: y
+README is ok: ${readme.ok}
+RELEASE_NOTES is ok: ${releasenotes.ok}
+NOTICE is ok: ${notice.ok}
+LICENSE is ok: ${license.ok}
+No unapproved licenses or archives: ${rat.license.ok}
+No unapproved binaries: ${rat.binaries.ok}
+ </echo>
+ <fail>
+ <condition>
+ <equals arg1="-1" arg2="${vote}"/>
+ </condition>
+ </fail>
+ </target>
+</project>
Added: dev/flex/installer/3.3/rc3/READme
==============================================================================
--- dev/flex/installer/3.3/rc3/READme (added)
+++ dev/flex/installer/3.3/rc3/READme Sun Nov 12 20:17:41 2017
@@ -0,0 +1,204 @@
+<!--
+
+Licensed to the Apache Software Foundation (ASF) under one or more
+contributor license agreements. See the NOTICE file distributed with
+this work for additional information regarding copyright ownership.
+The ASF licenses this file to You under the Apache License, Version 2.0
+(the "License"); you may not use this file except in compliance with
+the License. You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+-->
+
+==========================================================================================
+Overview:
+==========================================================================================
+
+- The Apache Flex SDK Installer AIR application provides an easy installation
of the
+ Apache Flex SDK and all its dependencies. This will make it suitable for
working with
+ IDEs such as Adobe Flash Builder, FDT, IntelliJ IDEA, FlashDevelop, etc.
+ When installing an Apache Flex SDK, the application downloads the following
+ dependencies:
+ - The AIR sdk (Windows vs. Mac) based on the current platform
+ - Adobe Flash Player playerglobal.swc
+ - SWFObject
+ - Open Source Media Framework (OSMF)
+
+ Optionally, the application will download these files if the user explicitly
agrees to
+ the licensing terms:
+ - Adobe embedded font support
+
+ Other release packages may download different dependencies.
+
+- The Apache Flex SDK Installer 3.0 and later supports the ability to install
+ virtually anything that can be installed via an Apache Ant script. The list
+ of choices to install are described in
+ installer/src/installer/sdk-installer-config-4.0.xml and posted to
+ http://flex.apache.org/installer/sdk-installer-config-4.0.xml. By default,
the
+ installer looks there to determine the list of choices. Once a selection is
made,
+ the installer then looks in the folder of the install package for a
-config.xml file
+ and if found, uses that to determine the set of licensing options that need
to be
+ accepted before installing. The installer then uncompresses the install
package and
+ looks for installer.xml and runs that script via an approximation of Apache
Ant that
+ has been written in ActionScript. If the -config.xml file is not found, the
Installer
+ assumes it is installing an older version of the Apache Flex SDK.
+
+- When installing an older version of the Apache Flex SDK, the installer
+ determines the file names and urls of the downloaded files from
+ installer/src/installer/sdk-installer-config-4.0.xml. When the dependencies
file
+ names or urls change in future, update the sdk-installer-config-4.0.xml to
ensure
+ that the application works correctly. For newer installs driven by Apache
Ant
+ scripts, the file names and urls are determined by the script itself.
+
+- The application uses http://flex.apache.org/single-mirror-url.cgi to
determine
+ the preferred mirror url to use to download the binary package. Newer
installs
+ that use Apache Ant scripts use their own logic to select dependencies from
mirrors.
+
+- Once the binary package is downloaded, a MD5 hash is generated for it.
+ This hash is compared with the hash from the Apache Flex SDK release site.
+ If they match, we verify that the downloaded binary package is a valid
Apache release and
+ proceed to unzip the file.
+
+- If required, the Adobe AIR SDK will be downloaded and the relevant files are
copied
+ to the required locations.
+
+- If required, the Adobe Flash Player playerglobal.swc file and the config
files
+ are placed in the required locations.
+
+- Then the rest of the external dependencies and the optional files (if
selected by user)
+ are downloaded and copied into the appropriate locations.
+
+- If you experience problems with the install, please try again, but
right-click
+ and select "Verbose Logging" to add more information to the log.
+
+- From the 2.6 version, you can select the version of Adobe Flash Player and
Adobe AIR SDK
+ the installer downloads.
+
+- From the 2.5 version, by default, Apache Flex SDK Installer 2.5 downloads
Adobe Flash
+ Player 11.1 and Adobe AIR SDK 3.4.
+ If you want to change it to any other supported combination, you save a copy
of the
+ config file found at:
http://flex.apache.org/installer/sdk-installer-config-3.0.xml,
+ modify the download urls to point to the required versions. Then run the
app from
+ command line mode with the optional command line parameter: -config=<path to
config file>
+
+- If building the app for Linux, open InstallApacheFlex-app.xml and change the
Adobe AIR
+ namespace from http://ns.adobe.com/air/application/4.0 to
+ http://ns.adobe.com/air/application/2.6 This is because AIR 2.6 is the
latest available
+ version on Linux.
+
+==========================================================================================
+How to build the installer using ANT (no Flash Builder or any other IDE
required):
+==========================================================================================
+
+0. Make sure you have the right version of the Adobe AIR SDK. Apache Flex
Installer
+ 3.1 uses Adobe AIR SDK 4.0. If you want to use an older version of the
AIR SDK,
+ you will have to change the namespace in the following files:
+ installer/src/InstallApacheFlex-app.xml
+ ant_on_air/tests/AntOnAIR-app.xml.
+
+1. Unzip the source distribution. You should see the 'installer' directory
and the
+ 'common' and 'ant_on_air' directories in the root.
+
+2. In the ant_on_air directory, run:
+ ant [-DFLEX_HOME=/path/to/apache/flex/sdk]
[-DAIR_HOME=/path/to/air/sdk]
+
+ FLEX_HOME is the absolute path to the Apache Flex SDK
+ If you omit this argument, and the system environment variable,
FLEX_HOME exists,
+ it is used. Otherwise, the FLEX_HOME_MAC or FLEX_HOME_WIN property in
+ installer/build.properties is used.
+
+ AIR_HOME is the absolute path to the Adobe AIR SDK
+ If you omit this argument, and the system environment variable,
AIR_HOME exists,
+ it is used. Otherwise, the AIR_HOME_MAC or AIR_HOME_WIN property in
+ installer/build.properties is used.
+
+3. In the root directory, run:
+ ant build [-DFLEX_HOME=/path/to/apache/flex/sdk]
[-DAIR_HOME=/path/to/air/sdk]
+
+4. The installer executable file created in the installer/release directory.
If you are
+ on Windows, you will see an .exe file; if you are on Mac OS, you will see
a .dmg file.
+ A temporary digital signing certificate - temp.p12 will be created in
the installer
+ directory as well. The password for this file is available in the
build.properties
+ file (var: TEMP_PASS_CHANGE_THIS)
+
+==========================================================================================
+How to set up the project for working with Adobe Flash Builder 4.7:
+==========================================================================================
+
+1. Unzip the source distribution. You should see the 'installer' directory
and the
+ 'common' and 'ant_on_air' directories in the root.
+
+2. In the installer directory run:
+ ant get-as3commons.swc
+ ant get-as3httpdclient.swc
+ These step downloads the required libraries and saves it in the libs
directory.
+
+3. If using Adobe Flash Builder, add a linked resource called:
+ APACHE_FLEX_UTILITIES_ROOT
+ and point it to the directory path where the 'installer' and 'common'
directories are
+ located.
+
+4. In the installer project, add ${APACHE_FLEX_UTILITIES_ROOT}/common/src as
a source path.
+
+5. In the installer project, add ${APACHE_FLEX_UTILITIES_ROOT}/ant_on_air/src
as a source path.
+
+6. In the installer project, add
${APACHE_FLEX_UTILITIES_ROOT}/ant_on_air/external as a source path.
+
+7. In the installer project, add
${APACHE_FLEX_UTILITIES_ROOT}/ant_on_air/locale/{locale} as a source path.
+
+==========================================================================================
+How to set up the project for working with JetBrains IDEA 12+
+==========================================================================================
+
+1. Setup a new project by either unzipping the downloaded source or grabbing
the source from the version control.
+
+2. During the project setup, DO NOT search for modules or frameworks. We
will set these up later.
+
+3. Setup a new module by going to the File -> New Module menu.
+ Module Type : Flash
+ Target Platform : Desktop
+ Output Type : Application
+ Create Sample App : Unchecked
+ Create HTML Wrapper : Unchecked
+
+ Create the new module, name it "installer" and chose the
${APACHE_FLEX_UTILITIES_ROOT}/installer directory
+
+4. After the module is created, go into the installer module settings
(Right-Click -> Open Module Settings)
+
+5. Add the following Content Roots :
+ flex-utilities\ant_on_air
+ flex-utilities\common
+
+6. Mark the following directories as Sources : (some may already be marked
as src)
+ flex-utilities\ant_on_air\src
+ flex-utilities\ant_on_air\external
+ flex-utilities\common\src
+ flex-utilities\installer\src
+
+7. Close the Settings dialog
+
+8. Open the Ant Build tab within IDEA.
+ Add the flex-utilities\build.xml ANT build script.
+
+9. Run the get-as3commons.swc and get-as3httpdclient.swc ant target. This
will download the required SWC to build the installer.
+
+10. Return to the module properties, and go to the dependencies tab. Make
sure the following are listed :
+ Flex SDK
+ flex-utilities\installer\libs
+ flex-utilities\installer\common\bin\common.swc
+ flex-utilities\installer\ant_on_air\bin\ant_on_air.swc
+ flex-utilities\ant_on_air\external\libs\as3commons-zip-1.0.0-alpha.1.swc
+
+11. Apply and close the dialog box.
+
+12. Update the flex-utilities\installer\build.properties to match your
settings. In theory you should only
+ have to update the FLEX_HOME_WIN or FLEX_HOME_MAC property to point to
your SDK with AIR 4.0 overlaid.
+
+You should now be able to build and debug the installer.
Added: dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz
==============================================================================
Binary file - no diff available.
Propchange:
dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz
------------------------------------------------------------------------------
svn:mime-type = application/octet-stream
Added: dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz.asc
==============================================================================
--- dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz.asc
(added)
+++ dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz.asc
Sun Nov 12 20:17:41 2017
@@ -0,0 +1,16 @@
+-----BEGIN PGP SIGNATURE-----
+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+=wA04
+-----END PGP SIGNATURE-----
Added: dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz.md5
==============================================================================
--- dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz.md5
(added)
+++ dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.tar.gz.md5
Sun Nov 12 20:17:41 2017
@@ -0,0 +1 @@
+f3053d991ae329cca2401735a97cd748
\ No newline at end of file
Added: dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip
==============================================================================
Binary file - no diff available.
Propchange: dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip
------------------------------------------------------------------------------
svn:mime-type = application/octet-stream
Added: dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip.asc
==============================================================================
--- dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip.asc
(added)
+++ dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip.asc Sun
Nov 12 20:17:41 2017
@@ -0,0 +1,16 @@
+-----BEGIN PGP SIGNATURE-----
+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+=/dS1
+-----END PGP SIGNATURE-----
Added: dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip.md5
==============================================================================
--- dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip.md5
(added)
+++ dev/flex/installer/3.3/rc3/apache-flex-sdk-installer-3.3.0-src.zip.md5 Sun
Nov 12 20:17:41 2017
@@ -0,0 +1 @@
+7a61ad5af5b431458dd076a891d82c40
\ No newline at end of file
Added:
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg
==============================================================================
Binary file - no diff available.
Propchange:
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg
------------------------------------------------------------------------------
svn:mime-type = application/octet-stream
Added:
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg.asc
==============================================================================
---
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg.asc
(added)
+++
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg.asc
Sun Nov 12 20:17:41 2017
@@ -0,0 +1,16 @@
+-----BEGIN PGP SIGNATURE-----
+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+=SL1G
+-----END PGP SIGNATURE-----
Added:
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg.md5
==============================================================================
---
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg.md5
(added)
+++
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.dmg.md5
Sun Nov 12 20:17:41 2017
@@ -0,0 +1 @@
+b51670a0970f59673361abff93891af8
\ No newline at end of file
Added:
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe
==============================================================================
Binary file - no diff available.
Propchange:
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe
------------------------------------------------------------------------------
svn:mime-type = application/octet-stream
Added:
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe.asc
==============================================================================
---
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe.asc
(added)
+++
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe.asc
Sun Nov 12 20:17:41 2017
@@ -0,0 +1,16 @@
+-----BEGIN PGP SIGNATURE-----
+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+=Mlrz
+-----END PGP SIGNATURE-----
Added:
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe.md5
==============================================================================
---
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe.md5
(added)
+++
dev/flex/installer/3.3/rc3/binaries/apache-flex-sdk-installer-3.3.0-bin.exe.md5
Sun Nov 12 20:17:41 2017
@@ -0,0 +1 @@
+cc4d8d405480d99af0ee5822d9473850
\ No newline at end of file
