ryerraguntla commented on code in PR #2933: URL: https://github.com/apache/iggy/pull/2933#discussion_r2974783226
########## core/connectors/sinks/influxdb_sink/src/lib.rs: ########## @@ -0,0 +1,780 @@ +/* Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + * KIND, either express or implied. See the License for the + * specific language governing permissions and limitations + * under the License. + */ + +use async_trait::async_trait; +use base64::{Engine as _, engine::general_purpose}; +use bytes::Bytes; +use iggy_connector_sdk::retry::{ + CircuitBreaker, exponential_backoff, jitter, parse_duration, parse_retry_after, +}; +use iggy_connector_sdk::{ + ConsumedMessage, Error, MessagesMetadata, Sink, TopicMetadata, sink_connector, +}; +use reqwest::{Client, StatusCode, Url}; +use serde::{Deserialize, Serialize}; +use std::sync::Arc; +use std::sync::atomic::{AtomicU64, Ordering}; +use std::time::Duration; +use std::time::SystemTime; +use std::time::UNIX_EPOCH; +use tracing::{debug, error, info, warn}; +sink_connector!(InfluxDbSink); + +const DEFAULT_MAX_RETRIES: u32 = 3; +const DEFAULT_RETRY_DELAY: &str = "1s"; +const DEFAULT_TIMEOUT: &str = "30s"; +const DEFAULT_PRECISION: &str = "us"; +// Maximum attempts for open() connectivity retries +const DEFAULT_MAX_OPEN_RETRIES: u32 = 10; +// Cap for exponential backoff in open() — never wait longer than this +const DEFAULT_OPEN_RETRY_MAX_DELAY: &str = "60s"; +// Cap for exponential backoff on per-write retries — kept short so a +// transient InfluxDB blip does not stall message delivery for too long +const DEFAULT_RETRY_MAX_DELAY: &str = "5s"; +// How many consecutive batch failures open the circuit breaker +const DEFAULT_CIRCUIT_BREAKER_THRESHOLD: u32 = 5; +// How long the circuit stays open before allowing a probe attempt +const DEFAULT_CIRCUIT_COOL_DOWN: &str = "30s"; + +// --------------------------------------------------------------------------- +// Main connector structs +// --------------------------------------------------------------------------- + +#[derive(Debug)] +pub struct InfluxDbSink { + pub id: u32, + config: InfluxDbSinkConfig, + client: Option<Client>, + /// Cached once in `open()` — config fields never change at runtime. + write_url: Option<Url>, + /// Cached once in `open()` — parsed from `config.retry_max_delay`. + /// Controls the backoff cap for per-write retries only; startup retries + /// use `config.open_retry_max_delay` and are never affected by this field. + write_retry_max_delay: Duration, + messages_processed: AtomicU64, + write_success: AtomicU64, + write_errors: AtomicU64, + verbose: bool, + retry_delay: Duration, + circuit_breaker: Arc<CircuitBreaker>, +} + +#[derive(Debug, Clone, Serialize, Deserialize)] +pub struct InfluxDbSinkConfig { + pub url: String, + pub org: String, + pub bucket: String, + pub token: String, + pub measurement: Option<String>, + pub precision: Option<String>, + pub batch_size: Option<u32>, + pub include_metadata: Option<bool>, + pub include_checksum: Option<bool>, + pub include_origin_timestamp: Option<bool>, + pub include_stream_tag: Option<bool>, + pub include_topic_tag: Option<bool>, + pub include_partition_tag: Option<bool>, + pub payload_format: Option<String>, + pub verbose_logging: Option<bool>, + pub max_retries: Option<u32>, + pub retry_delay: Option<String>, + pub timeout: Option<String>, + // How many times open() will retry before giving up + pub max_open_retries: Option<u32>, + // Upper cap on open() backoff delay — can be set high (e.g. "60s") for + // patient startup without affecting per-write retry behaviour + pub open_retry_max_delay: Option<String>, + // Upper cap on per-write retry backoff — kept short so a transient blip + // does not stall message delivery; independent of open_retry_max_delay + pub retry_max_delay: Option<String>, + // Circuit breaker configuration + pub circuit_breaker_threshold: Option<u32>, + pub circuit_breaker_cool_down: Option<String>, +} + +#[derive(Debug, Clone, Copy, PartialEq, Eq, Default)] +enum PayloadFormat { + #[default] + Json, + Text, + Base64, +} + +impl PayloadFormat { + fn from_config(value: Option<&str>) -> Self { + match value.map(|v| v.to_ascii_lowercase()).as_deref() { + Some("text") | Some("utf8") => PayloadFormat::Text, + Some("base64") | Some("raw") => PayloadFormat::Base64, + Some("json") => PayloadFormat::Json, + other => { + warn!( + "Unrecognized payload_format value {:?}, falling back to JSON. \ + Valid values are: \"json\", \"text\", \"utf8\", \"base64\", \"raw\".", + other + ); + PayloadFormat::Json + } + } + } +} + +// --------------------------------------------------------------------------- +// Helpers +// --------------------------------------------------------------------------- + +fn is_transient_status(status: StatusCode) -> bool { + status == StatusCode::TOO_MANY_REQUESTS || status.is_server_error() +} + +/// Write an escaped measurement name into `buf`. +/// Escapes: `\` → `\\`, `,` → `\,`, ` ` → `\ ` +fn write_measurement(buf: &mut String, value: &str) { + for ch in value.chars() { + match ch { + '\\' => buf.push_str("\\\\"), + ',' => buf.push_str("\\,"), + ' ' => buf.push_str("\\ "), + _ => buf.push(ch), + } + } +} + +/// Write an escaped tag key/value into `buf`. +/// Escapes: `\` → `\\`, `,` → `\,`, `=` → `\=`, ` ` → `\ ` +fn write_tag_value(buf: &mut String, value: &str) { + for ch in value.chars() { + match ch { + '\\' => buf.push_str("\\\\"), + ',' => buf.push_str("\\,"), + '=' => buf.push_str("\\="), + ' ' => buf.push_str("\\ "), + _ => buf.push(ch), + } + } +} + +/// Write an escaped string field value (without surrounding quotes) into `buf`. +/// Escapes: `\` → `\\`, `"` → `\"` +fn write_field_string(buf: &mut String, value: &str) { + for ch in value.chars() { + match ch { + '\\' => buf.push_str("\\\\"), + '"' => buf.push_str("\\\""), + _ => buf.push(ch), + } + } +} + +// --------------------------------------------------------------------------- +// InfluxDbSink implementation +// --------------------------------------------------------------------------- + +impl InfluxDbSink { + pub fn new(id: u32, config: InfluxDbSinkConfig) -> Self { + let verbose = config.verbose_logging.unwrap_or(false); + let retry_delay = parse_duration(config.retry_delay.as_deref(), DEFAULT_RETRY_DELAY); + + // Build circuit breaker from config + let cb_threshold = config + .circuit_breaker_threshold + .unwrap_or(DEFAULT_CIRCUIT_BREAKER_THRESHOLD); + let cb_cool_down = parse_duration( + config.circuit_breaker_cool_down.as_deref(), + DEFAULT_CIRCUIT_COOL_DOWN, + ); + + InfluxDbSink { + id, + config, + client: None, + write_url: None, + write_retry_max_delay: Duration::from_secs(0), // overwritten in open() + messages_processed: AtomicU64::new(0), + write_success: AtomicU64::new(0), + write_errors: AtomicU64::new(0), + verbose, + retry_delay, + circuit_breaker: Arc::new(CircuitBreaker::new(cb_threshold, cb_cool_down)), + } + } + + fn build_client(&self) -> Result<Client, Error> { + let timeout = parse_duration(self.config.timeout.as_deref(), DEFAULT_TIMEOUT); + Client::builder() + .timeout(timeout) + .build() + .map_err(|e| Error::InitError(format!("Failed to create HTTP client: {e}"))) + } + + fn build_write_url(&self) -> Result<Url, Error> { + let base = self.config.url.trim_end_matches('/'); + let mut url = Url::parse(&format!("{base}/api/v2/write")) + .map_err(|e| Error::InvalidConfigValue(format!("Invalid InfluxDB URL: {e}")))?; + + let precision = self + .config + .precision + .as_deref() + .unwrap_or(DEFAULT_PRECISION); + url.query_pairs_mut() + .append_pair("org", &self.config.org) + .append_pair("bucket", &self.config.bucket) + .append_pair("precision", precision); + + Ok(url) + } + + fn build_health_url(&self) -> Result<Url, Error> { + let base = self.config.url.trim_end_matches('/'); + Url::parse(&format!("{base}/health")) + .map_err(|e| Error::InvalidConfigValue(format!("Invalid InfluxDB URL: {e}"))) + } + + async fn check_connectivity(&self) -> Result<(), Error> { + let client = self.get_client()?; + let url = self.build_health_url()?; + + let response = client + .get(url) + .send() + .await + .map_err(|e| Error::Connection(format!("InfluxDB health check failed: {e}")))?; + + if !response.status().is_success() { + let status = response.status(); + let body = response + .text() + .await + .unwrap_or_else(|_| "failed to read response body".to_string()); + return Err(Error::Connection(format!( + "InfluxDB health check returned status {status}: {body}" + ))); + } + + Ok(()) + } + + // Retry connectivity check with exponential backoff + jitter + // instead of failing hard on the first attempt. + async fn check_connectivity_with_retry(&self) -> Result<(), Error> { + let max_open_retries = self + .config + .max_open_retries + .unwrap_or(DEFAULT_MAX_OPEN_RETRIES) + .max(1); + + let max_delay = parse_duration( + self.config.open_retry_max_delay.as_deref(), + DEFAULT_OPEN_RETRY_MAX_DELAY, + ); + + let mut attempt = 0u32; + loop { + match self.check_connectivity().await { + Ok(()) => { + if attempt > 0 { + info!( + "InfluxDB connectivity established after {attempt} retries \ + for sink connector ID: {}", + self.id + ); + } + return Ok(()); + } + Err(e) => { + attempt += 1; + if attempt >= max_open_retries { + error!( + "InfluxDB connectivity check failed after {attempt} attempts \ + for sink connector ID: {}. Giving up: {e}", + self.id + ); + return Err(e); + } + // Exponential backoff, with jitter + let backoff = jitter(exponential_backoff(self.retry_delay, attempt, max_delay)); + warn!( + "InfluxDB health check failed (attempt {attempt}/{max_open_retries}) \ + for sink connector ID: {}. Retrying in {backoff:?}: {e}", + self.id + ); + tokio::time::sleep(backoff).await; + } + } + } + } + + fn get_client(&self) -> Result<&Client, Error> { + self.client + .as_ref() + .ok_or_else(|| Error::Connection("InfluxDB client is not initialized".to_string())) + } + + fn measurement(&self) -> &str { + self.config + .measurement + .as_deref() + .unwrap_or("iggy_messages") + } + + fn payload_format(&self) -> PayloadFormat { + PayloadFormat::from_config(self.config.payload_format.as_deref()) + } + + fn timestamp_precision(&self) -> &str { + self.config + .precision + .as_deref() + .unwrap_or(DEFAULT_PRECISION) + } + + fn get_max_retries(&self) -> u32 { + self.config + .max_retries + .unwrap_or(DEFAULT_MAX_RETRIES) + .max(1) + } + + fn to_precision_timestamp(&self, micros: u64) -> u64 { + match self.timestamp_precision() { + "ns" => micros.saturating_mul(1_000), + "us" => micros, + "ms" => micros / 1_000, + "s" => micros / 1_000_000, + _ => micros, + } + } + /// Serialise one message as a line-protocol line, appending directly into + /// `buf` with no intermediate `Vec<String>` for tags or fields. + /// + /// # Allocation budget (per message, happy path) + /// - Zero `Vec` allocations for tags or fields. + /// - Zero per-tag/per-field `format!` allocations. + /// - One `Vec<u8>` for `payload_bytes` (unavoidable — payload must be + /// decoded/serialised before it can be escaped into the buffer). + /// - The caller's `buf` grows in place; if it was pre-allocated with + /// `with_capacity` it will not reallocate for typical message sizes. + fn append_line( + &self, + buf: &mut String, + topic_metadata: &TopicMetadata, + messages_metadata: &MessagesMetadata, + message: &ConsumedMessage, + ) -> Result<(), Error> { + let include_metadata = self.config.include_metadata.unwrap_or(true); + let include_checksum = self.config.include_checksum.unwrap_or(true); + let include_origin_timestamp = self.config.include_origin_timestamp.unwrap_or(true); + let include_stream_tag = self.config.include_stream_tag.unwrap_or(true); + let include_topic_tag = self.config.include_topic_tag.unwrap_or(true); + let include_partition_tag = self.config.include_partition_tag.unwrap_or(true); + + // ── Measurement ────────────────────────────────────────────────────── + write_measurement(buf, self.measurement()); + + // ── Tag set ────────────────────────────────────────────────────────── + // Tags are written as ",key=value" pairs directly into buf. + // The offset tag is always present — it makes every point unique in + // InfluxDB's deduplication key (measurement + tag set + timestamp), + // regardless of precision or how many messages share a timestamp. + if include_metadata && include_stream_tag { + buf.push_str(",stream="); + write_tag_value(buf, &topic_metadata.stream); + } + if include_metadata && include_topic_tag { + buf.push_str(",topic="); + write_tag_value(buf, &topic_metadata.topic); + } + if include_metadata && include_partition_tag { + use std::fmt::Write as _; + write!(buf, ",partition={}", messages_metadata.partition_id) + .expect("write to String is infallible"); + } + // offset tag — always written, ensures point uniqueness + { + use std::fmt::Write as _; + write!(buf, ",offset={}", message.offset).expect("write to String is infallible"); + } + + // ── Field set ──────────────────────────────────────────────────────── + // First field: no leading comma. All subsequent fields: leading comma. + buf.push(' '); + + buf.push_str("message_id=\""); + write_field_string(buf, &message.id.to_string()); + buf.push('"'); + + // offset as a numeric field (queryable in Flux) in addition to the tag + { + use std::fmt::Write as _; + write!(buf, ",offset={}u", message.offset).expect("write to String is infallible"); + } + + // Optional metadata fields written when the corresponding tag is + // disabled (so the value is still queryable as a field). + if include_metadata && !include_stream_tag { + buf.push_str(",iggy_stream=\""); + write_field_string(buf, &topic_metadata.stream); + buf.push('"'); + } + if include_metadata && !include_topic_tag { + buf.push_str(",iggy_topic=\""); + write_field_string(buf, &topic_metadata.topic); + buf.push('"'); + } + if include_metadata && !include_partition_tag { + use std::fmt::Write as _; + write!( + buf, + ",iggy_partition={}u", + messages_metadata.partition_id as u64 + ) + .expect("write to String is infallible"); + } + if include_checksum { + use std::fmt::Write as _; + write!(buf, ",iggy_checksum={}u", message.checksum) + .expect("write to String is infallible"); + } + if include_origin_timestamp { + use std::fmt::Write as _; + write!(buf, ",iggy_origin_timestamp={}u", message.origin_timestamp) + .expect("write to String is infallible"); + } + + // ── Payload field ──────────────────────────────────────────────────── + // try_as_bytes() serialises in-place without cloning the Payload tree. + let payload_bytes = message.payload.try_as_bytes().map_err(|e| { + Error::CannotStoreData(format!("Failed to convert payload to bytes: {e}")) + })?; + + match self.payload_format() { + PayloadFormat::Json => { + let value: serde_json::Value = + serde_json::from_slice(&payload_bytes).map_err(|e| { + Error::CannotStoreData(format!( + "Payload format is json but payload is invalid JSON: {e}" + )) + })?; + let compact = serde_json::to_string(&value).map_err(|e| { + Error::CannotStoreData(format!("Failed to serialize JSON payload: {e}")) + })?; + buf.push_str(",payload_json=\""); + write_field_string(buf, &compact); + buf.push('"'); + } + PayloadFormat::Text => { + let text = String::from_utf8(payload_bytes).map_err(|e| { + Error::CannotStoreData(format!( + "Payload format is text but payload is invalid UTF-8: {e}" + )) + })?; + buf.push_str(",payload_text=\""); + write_field_string(buf, &text); + buf.push('"'); + } + PayloadFormat::Base64 => { + let encoded = general_purpose::STANDARD.encode(&payload_bytes); + buf.push_str(",payload_base64=\""); + write_field_string(buf, &encoded); + buf.push('"'); + } + } + + // ── Timestamp ──────────────────────────────────────────────────────── + // message.timestamp is microseconds since Unix epoch. + // Fall back to now() when unset (0) so points are not stored at the + // Unix epoch (year 1970), which falls outside every range(start:-1h). + let base_micros = if message.timestamp == 0 { + SystemTime::now() + .duration_since(UNIX_EPOCH) + .unwrap_or_default() + .as_micros() as u64 + } else { + message.timestamp + }; + let ts = self.to_precision_timestamp(base_micros); + + { + use std::fmt::Write as _; + write!(buf, " {ts}").expect("write to String is infallible"); + } + + debug!( + "InfluxDB sink ID: {} point — offset={}, raw_ts={}, influx_ts={ts}", + self.id, message.offset, message.timestamp + ); + + Ok(()) + } + + async fn process_batch( + &self, + topic_metadata: &TopicMetadata, + messages_metadata: &MessagesMetadata, + messages: &[ConsumedMessage], + ) -> Result<(), Error> { + if messages.is_empty() { + return Ok(()); + } + + // Single buffer for the entire batch — reused across all messages. + // Pre-allocate a generous estimate (256 bytes per message) to avoid + // reallocation in the common case. The buffer is passed into + // append_line() which writes each line directly, with '\n' separators + // between lines. No per-message String is allocated. + let mut body = String::with_capacity(messages.len() * 256); + + for (i, message) in messages.iter().enumerate() { + if i > 0 { + body.push('\n'); + } + self.append_line(&mut body, topic_metadata, messages_metadata, message)?; + } + + self.write_with_retry(body).await + } + + async fn write_with_retry(&self, body: String) -> Result<(), Error> { + let client = self.get_client()?; + let url = self.write_url.clone().ok_or_else(|| { + Error::Connection("write_url not initialised — was open() called?".to_string()) + })?; + let max_retries = self.get_max_retries(); + let token = self.config.token.clone(); + + // Cap for per-write backoff — cached in open(), no re-parse needed. + let max_delay = self.write_retry_max_delay; + + // Convert once before the loop — Bytes is a reference-counted view over + // the same allocation. Every .clone() inside the loop is a pointer bump + // (O(1)), not a deep copy of the string data (O(n)). + let body: Bytes = Bytes::from(body); + + let mut attempts = 0u32; + loop { + let response_result = client + .post(url.clone()) + .header("Authorization", format!("Token {token}")) + .header("Content-Type", "text/plain; charset=utf-8") + .body(body.clone()) + .send() + .await; + + match response_result { + Ok(response) => { + let status = response.status(); + if status == StatusCode::NO_CONTENT || status == StatusCode::OK { + return Ok(()); + } + + // Honour Retry-After on 429 before our own backoff + let retry_after = if status == StatusCode::TOO_MANY_REQUESTS { + response + .headers() + .get("Retry-After") + .and_then(|v| v.to_str().ok()) + .and_then(parse_retry_after) + } else { + None + }; + + let body_text = response + .text() + .await + .unwrap_or_else(|_| "failed to read response body".to_string()); + + attempts += 1; + if is_transient_status(status) && attempts < max_retries { + // Use server-supplied delay when available + let delay = retry_after.unwrap_or_else(|| { + // Exponential, with jitter + jitter(exponential_backoff(self.retry_delay, attempts, max_delay)) + }); + warn!( + "Transient InfluxDB write error (attempt {attempts}/{max_retries}): \ + {status}. Retrying in {delay:?}..." + ); + tokio::time::sleep(delay).await; + continue; + } + + return Err(Error::CannotStoreData(format!( + "InfluxDB write failed with status {status}: {body_text}" + ))); + } + Err(e) => { + attempts += 1; + if attempts < max_retries { + // Exponential, with jitter + let delay = + jitter(exponential_backoff(self.retry_delay, attempts, max_delay)); + warn!( + "Failed to send write request to InfluxDB \ + (attempt {attempts}/{max_retries}): {e}. Retrying in {delay:?}..." + ); + tokio::time::sleep(delay).await; + continue; + } + + return Err(Error::CannotStoreData(format!( + "InfluxDB write failed after {attempts} attempts: {e}" + ))); + } + } + } + } +} + +// --------------------------------------------------------------------------- +// Sink trait implementation +// --------------------------------------------------------------------------- + +#[async_trait] +impl Sink for InfluxDbSink { + async fn open(&mut self) -> Result<(), Error> { + info!( + "Opening InfluxDB sink connector with ID: {}. Bucket: {}, org: {}", + self.id, self.config.bucket, self.config.org + ); + + self.client = Some(self.build_client()?); + + // Cache once here — both are derived purely from config fields that + // never change at runtime, so recomputing them on every batch write + // is wasteful. + self.write_url = Some(self.build_write_url()?); + self.write_retry_max_delay = parse_duration( + self.config.retry_max_delay.as_deref(), + DEFAULT_RETRY_MAX_DELAY, + ); + + // Use retrying connectivity check instead of hard-fail + self.check_connectivity_with_retry().await?; + + info!( + "InfluxDB sink connector with ID: {} opened successfully", + self.id + ); + Ok(()) + } + + async fn consume( + &self, + topic_metadata: &TopicMetadata, + messages_metadata: MessagesMetadata, + messages: Vec<ConsumedMessage>, + ) -> Result<(), Error> { + let batch_size = self.config.batch_size.unwrap_or(500) as usize; + let total_messages = messages.len(); + + // Skip writes entirely if circuit breaker is open + if self.circuit_breaker.is_open().await { + warn!( + "InfluxDB sink ID: {} — circuit breaker is OPEN. \ + Skipping {} messages to avoid hammering a down InfluxDB.", + self.id, total_messages + ); + // Return an error so the runtime knows messages were not written + return Err(Error::CannotStoreData( + "Circuit breaker is open — InfluxDB write skipped".to_string(), + )); + } + + // Collect the first batch error rather than silently dropping + let mut first_error: Option<Error> = None; + + for batch in messages.chunks(batch_size.max(1)) { + match self + .process_batch(topic_metadata, &messages_metadata, batch) + .await + { + Ok(()) => { + // Successful write — reset circuit breaker + self.circuit_breaker.record_success(); + self.write_success + .fetch_add(batch.len() as u64, Ordering::Relaxed); + } + Err(e) => { + // Failed write — notify circuit breaker + self.circuit_breaker.record_failure().await; + self.write_errors + .fetch_add(batch.len() as u64, Ordering::Relaxed); + error!( + "InfluxDB sink ID: {} failed to write batch of {} messages: {e}", + self.id, + batch.len() + ); + + // Capture first error; continue attempting remaining + // batches to maximise data delivery, but record the failure. + if first_error.is_none() { + first_error = Some(e); + } + } + } + } + + let total_processed = self + .messages_processed + .fetch_add(total_messages as u64, Ordering::Relaxed) Review Comment: Though messages_processed may mean same but could be presumed as success.messages_attempted makes more clear for understanding , will change to messages_attempted. -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
