This is an automated email from the ASF dual-hosted git repository.
critas pushed a commit to branch main
in repository https://gitbox.apache.org/repos/asf/iotdb-docs.git
The following commit(s) were added to refs/heads/main by this push:
new 18826fbe add notes in docker compose yml (#874)
18826fbe is described below
commit 18826fbe0c882ef62da8d77b6c42640a8a9454c9
Author: leto-b <[email protected]>
AuthorDate: Fri Sep 12 15:06:57 2025 +0800
add notes in docker compose yml (#874)
---
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
.../Docker-Deployment_apache.md | 21 +++++++++++++++++++++
.../Docker-Deployment_timecho.md | 21 +++++++++++++++++++++
24 files changed, 504 insertions(+)
diff --git
a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
index 1cf921fd..fb89ecfa 100644
---
a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -126,6 +126,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -287,6 +294,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -321,6 +335,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 Start ConfigNode for the First Time
diff --git
a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 78c9ead8..33af0eee 100644
---
a/src/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -138,6 +138,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -319,6 +326,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -354,6 +368,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 Start ConfigNode for the First Time
diff --git
a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_apache.md
index b0407e2c..2bc67515 100644
---
a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -286,6 +293,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -320,6 +334,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 Starting Confignode For The First Time
diff --git
a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 9b274abd..ff6e6eaf 100644
---
a/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 Starting Confignode For The First Time
diff --git
a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_apache.md
index 66c1b2c9..5b2204c4 100644
---
a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -286,6 +293,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -320,6 +334,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### Starting Confignode For The First Time
diff --git
a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 4aec6d8e..0c22cc53 100644
---
a/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### Starting Confignode For The First Time
diff --git
a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_apache.md
index 66c1b2c9..5b2204c4 100644
---
a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -286,6 +293,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -320,6 +334,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### Starting Confignode For The First Time
diff --git
a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 4aec6d8e..0c22cc53 100644
---
a/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### Starting Confignode For The First Time
diff --git
a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
index 1cf921fd..fb89ecfa 100644
---
a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -126,6 +126,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -287,6 +294,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -321,6 +335,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 Start ConfigNode for the First Time
diff --git
a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 78c9ead8..33af0eee 100644
---
a/src/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -138,6 +138,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -319,6 +326,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -354,6 +368,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 Start ConfigNode for the First Time
diff --git
a/src/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_apache.md
index b0407e2c..2bc67515 100644
---
a/src/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -286,6 +293,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -320,6 +334,13 @@ services:
- ./iotdb/logs:/iotdb/logs
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 Starting Confignode For The First Time
diff --git
a/src/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 9b274abd..ff6e6eaf 100644
---
a/src/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #Using the host network
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 Starting Confignode For The First Time
diff --git
a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
index e45f2b41..b9f352b0 100644
---
a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -284,6 +291,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -316,6 +330,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 首次启动confignode
diff --git
a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 155a1991..04cd2111 100644
---
a/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/zh/UserGuide/Master/Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 首次启动confignode
diff --git
a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_apache.md
index 283f7308..ddbfff14 100644
---
a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -284,6 +291,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -316,6 +330,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 首次启动confignode
diff --git
a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 155a1991..04cd2111 100644
---
a/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/zh/UserGuide/Master/Tree/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 首次启动confignode
diff --git
a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_apache.md
index cb609ca7..63f0a929 100644
---
a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -284,6 +291,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -316,6 +330,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 首次启动confignode
diff --git
a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 8d98b0f4..74123890 100644
---
a/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/zh/UserGuide/V1.3.x/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 首次启动confignode
diff --git
a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_apache.md
index cb609ca7..63f0a929 100644
---
a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -284,6 +291,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -316,6 +330,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 首次启动confignode
diff --git
a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 8d98b0f4..74123890 100644
---
a/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/zh/UserGuide/dev-1.3/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 首次启动confignode
diff --git
a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
index e45f2b41..b9f352b0 100644
---
a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -284,6 +291,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -316,6 +330,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 首次启动confignode
diff --git
a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 155a1991..04cd2111 100644
---
a/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/zh/UserGuide/latest-Table/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 首次启动confignode
diff --git
a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_apache.md
b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_apache.md
index b09d7ece..e31ef506 100644
---
a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_apache.md
+++
b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_apache.md
@@ -125,6 +125,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -284,6 +291,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -316,6 +330,13 @@ services:
- ./iotdb/data:/iotdb/data
- ./iotdb/logs:/iotdb/logs
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 首次启动confignode
diff --git
a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_timecho.md
b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_timecho.md
index 155a1991..04cd2111 100644
---
a/src/zh/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_timecho.md
+++
b/src/zh/UserGuide/latest/Deployment-and-Maintenance/Docker-Deployment_timecho.md
@@ -142,6 +142,13 @@ services:
networks:
iotdb:
ipv4_address: 172.18.0.6
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
networks:
iotdb:
external: true
@@ -329,6 +336,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
**datanode.yml：**
@@ -364,6 +378,13 @@ services:
- /usr/sbin/dmidecode:/usr/sbin/dmidecode:ro
- /dev/mem:/dev/mem:ro
network_mode: "host" #使用host网络
+ # Note: Some environments set an extremely high container nofile limit
(~2^30 = 1073741824).
+ # This can make the startup step "Checking whether the ports are already
occupied..." appear to hang (lsof slow).
+ # If you see that line for a long time, lower the nofile limit by
uncommenting below:
+ # ulimits:
+ # nofile:
+ # soft: 1048576
+ # hard: 1048576
```
### 3.4 首次启动confignode
