http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/kernel/errors.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/kernel/errors.jam b/ext/kenlm/jam-files/boost-build/kernel/errors.jam deleted file mode 100644 index 9563396..0000000 --- a/ext/kenlm/jam-files/boost-build/kernel/errors.jam +++ /dev/null @@ -1,287 +0,0 @@ -# Copyright 2003 Dave Abrahams -# Copyright 2004 Vladimir Prus -# Distributed under the Boost Software License, Version 1.0. -# (See accompanying file LICENSE_1_0.txt or copy at -# http://www.boost.org/LICENSE_1_0.txt) - -# Print a stack backtrace leading to this rule's caller. Each argument -# represents a line of output to be printed after the first line of the -# backtrace. -# -rule backtrace ( skip-frames prefix messages * : * ) -{ - local frame-skips = 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 73 77 81 ; - local drop-elements = $(frame-skips[$(skip-frames)]) ; - if ! ( $(skip-frames) in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ) - { - ECHO "warning: backtrace doesn't support skipping $(skip-frames) " - "frames; using 1 instead." ; - drop-elements = 5 ; - } - - local args = $(.args) ; - if $(.user-modules-only) - { - local bt = [ nearest-user-location ] ; - if $(bt) - { - ECHO $(prefix) at $(bt) ; - } - for local n in $(args) - { - if $($(n))-is-defined - { - ECHO $(prefix) $($(n)) ; - } - } - } - else - { - # Get the whole backtrace, then drop the initial quadruples - # corresponding to the frames that must be skipped. - local bt = [ BACKTRACE ] ; - bt = $(bt[$(drop-elements)-]) ; - - while $(bt) - { - local m = [ MATCH ^(.+)\\.$ : $(bt[3]) ] ; - ECHO $(bt[1]):$(bt[2]): "in" $(bt[4]) "from module" $(m) ; - - # The first time through, print each argument on a separate line. - for local n in $(args) - { - if $($(n))-is-defined - { - ECHO $(prefix) $($(n)) ; - } - } - args = ; # Kill args so that this never happens again. - - # Move on to the next quadruple. - bt = $(bt[5-]) ; - } - } -} - -.args ?= messages 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ; -.disabled ?= ; -.last-error-$(.args) ?= ; - - -# try-catch -- -# -# This is not really an exception-handling mechanism, but it does allow us to -# perform some error-checking on our error-checking. Errors are suppressed after -# a try, and the first one is recorded. Use catch to check that the error -# message matched expectations. - -# Begin looking for error messages. -# -rule try ( ) -{ - .disabled += true ; - .last-error-$(.args) = ; -} - - -# Stop looking for error messages; generate an error if an argument of messages -# is not found in the corresponding argument in the error call. -# -rule catch ( messages * : * ) -{ - .disabled = $(.disabled[2-]) ; # Pop the stack. - - import sequence ; - - if ! $(.last-error-$(.args))-is-defined - { - error-skip-frames 3 expected an error, but none occurred ; - } - else - { - for local n in $(.args) - { - if ! $($(n)) in $(.last-error-$(n)) - { - local v = [ sequence.join $($(n)) : " " ] ; - v ?= "" ; - local joined = [ sequence.join $(.last-error-$(n)) : " " ] ; - - .last-error-$(.args) = ; - error-skip-frames 3 expected \"$(v)\" in argument $(n) of error - : got \"$(joined)\" instead ; - } - } - } -} - - -rule error-skip-frames ( skip-frames messages * : * ) -{ - if ! $(.disabled) - { - backtrace $(skip-frames) error: $(messages) : $(2) : $(3) : $(4) : $(5) - : $(6) : $(7) : $(8) : $(9) : $(10) : $(11) : $(12) : $(13) : $(14) - : $(15) : $(16) : $(17) : $(18) : $(19) ; - EXIT ; - } - else if ! $(.last-error-$(.args)) - { - for local n in $(.args) - { - # Add an extra empty string so that we always have something in the - # event of an error. - .last-error-$(n) = $($(n)) "" ; - } - } -} - -if --no-error-backtrace in [ modules.peek : ARGV ] -{ - .no-error-backtrace = true ; -} - - -# Print an error message with a stack backtrace and exit. -# -rule error ( messages * : * ) -{ - if $(.no-error-backtrace) - { - local first-printed ; - # Print each argument on a separate line. - for local n in $(.args) - { - if $($(n))-is-defined - { - if ! $(first-printed) - { - ECHO error: $($(n)) ; - first-printed = true ; - } - else - { - ECHO $($(n)) ; - } - } - } - EXIT ; - } - else - { - error-skip-frames 3 $(1) : $(2) : $(3) : $(4) : $(5) : $(6) : $(7) : - $(8) : $(9) : $(10) : $(11) : $(12) : $(13) : $(14) : $(15) : $(16) - : $(17) : $(18) : $(19) ; - } -} - - -# Same as 'error', but the generated backtrace will include only user files. -# -rule user-error ( messages * : * ) -{ - .user-modules-only = 1 ; - error-skip-frames 3 $(1) : $(2) : $(3) : $(4) : $(5) : $(6) : $(7) : $(8) : - $(9) : $(10) : $(11) : $(12) : $(13) : $(14) : $(15) : $(16) : $(17) : - $(18) : $(19) ; -} - - -# Print a warning message with a stack backtrace and exit. -# -rule warning -{ - backtrace 2 warning: $(1) : $(2) : $(3) : $(4) : $(5) : $(6) : $(7) : $(8) : - $(9) : $(10) : $(11) : $(12) : $(13) : $(14) : $(15) : $(16) : $(17) : - $(18) : $(19) ; -} - - -# Convert an arbitrary argument list into a list with ":" separators and quoted -# elements representing the same information. This is mostly useful for -# formatting descriptions of arguments with which a rule was called when -# reporting an error. -# -rule lol->list ( * ) -{ - local result ; - local remaining = 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ; - while $($(remaining)) - { - local n = $(remaining[1]) ; - remaining = $(remaining[2-]) ; - - if $(n) != 1 - { - result += ":" ; - } - result += \"$($(n))\" ; - } - return $(result) ; -} - - -# Return the file:line for the nearest entry in backtrace which correspond to a -# user module. -# -rule nearest-user-location ( ) -{ - local bt = [ BACKTRACE ] ; - - local result ; - while $(bt) && ! $(result) - { - local m = [ MATCH ^(.+)\\.$ : $(bt[3]) ] ; - local user-modules = ([Jj]amroot(.jam|.v2|)|([Jj]amfile(.jam|.v2|)|user-config.jam|site-config.jam|project-config.jam|project-root.jam) ; - - if [ MATCH $(user-modules) : $(bt[1]:D=) ] - { - result = $(bt[1]):$(bt[2]) ; - } - bt = $(bt[5-]) ; - } - return $(result) ; -} - - -# If optimized rule is available in Jam, use it. -if NEAREST_USER_LOCATION in [ RULENAMES ] -{ - rule nearest-user-location ( ) - { - local r = [ NEAREST_USER_LOCATION ] ; - return $(r[1]):$(r[2]) ; - } -} - - -rule __test__ ( ) -{ - # Show that we can correctly catch an expected error. - try ; - { - error an error occurred : somewhere ; - } - catch an error occurred : somewhere ; - - # Show that unexpected errors generate real errors. - try ; - { - try ; - { - error an error occurred : somewhere ; - } - catch an error occurred : nowhere ; - } - catch expected \"nowhere\" in argument 2 ; - - # Show that not catching an error where one was expected is an error. - try ; - { - try ; - { - } - catch ; - } - catch expected an error, but none occurred ; -}
http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/kernel/modules.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/kernel/modules.jam b/ext/kenlm/jam-files/boost-build/kernel/modules.jam deleted file mode 100644 index 4258225..0000000 --- a/ext/kenlm/jam-files/boost-build/kernel/modules.jam +++ /dev/null @@ -1,359 +0,0 @@ -# Copyright 2003 Dave Abrahams -# Copyright 2003, 2005 Vladimir Prus -# Distributed under the Boost Software License, Version 1.0. -# (See accompanying file LICENSE_1_0.txt or copy at -# http://www.boost.org/LICENSE_1_0.txt) - -# Essentially an include guard; ensures that no module is loaded multiple times. -.loaded ?= ; - -# A list of modules currently being loaded for error reporting of circular -# dependencies. -.loading ?= ; - -# A list of modules needing to be tested using their __test__ rule. -.untested ?= ; - -# A list of modules which have been tested using their __test__ rule. -.tested ?= ; - - -# Runs internal Boost Build unit tests for the specified module. The module's -# __test__ rule is executed in its own module to eliminate any inadvertent -# effects of testing module dependencies (such as assert) on the module itself. -# -local rule run-module-test ( m ) -{ - local tested-modules = [ modules.peek modules : .tested ] ; - - if ( ! $(m) in $(tested-modules) ) # Avoid recursive test invocations. - && ( ( --debug in $(argv) ) || ( --debug-module=$(m) in $(argv) ) ) - { - modules.poke modules : .tested : $(tested-modules) $(m) ; - - if ! ( __test__ in [ RULENAMES $(m) ] ) - { - local argv = [ peek : ARGV ] ; - if ! ( --quiet in $(argv) ) && ( --debug-tests in $(argv) ) - { - ECHO warning: no __test__ rule defined in module $(m) ; - } - } - else - { - if ! ( --quiet in $(argv) ) - { - ECHO testing module $(m)... ; - } - - local test-module = __test-$(m)__ ; - IMPORT $(m) : [ RULENAMES $(m) ] : $(test-module) : [ RULENAMES $(m) - ] ; - IMPORT $(m) : __test__ : $(test-module) : __test__ : LOCALIZE ; - module $(test-module) - { - __test__ ; - } - } - } -} - - -# Return the binding of the given module. -# -rule binding ( module ) -{ - return $($(module).__binding__) ; -} - - -# Sets the module-local value of a variable. This is the most reliable way to -# set a module-local variable in a different module; it eliminates issues of -# name shadowing due to dynamic scoping. -# -rule poke ( module-name ? : variables + : value * ) -{ - module $(<) - { - $(>) = $(3) ; - } -} - - -# Returns the module-local value of a variable. This is the most reliable way to -# examine a module-local variable in a different module; it eliminates issues of -# name shadowing due to dynamic scoping. -# -rule peek ( module-name ? : variables + ) -{ - module $(<) - { - return $($(>)) ; - } -} - - -# Call the given rule locally in the given module. Use this for rules accepting -# rule names as arguments, so that the passed rule may be invoked in the context -# of the rule's caller (for example, if the rule accesses module globals or is a -# local rule). Note that rules called this way may accept at most 18 parameters. -# -rule call-in ( module-name ? : rule-name args * : * ) -{ - module $(module-name) - { - return [ $(2) : $(3) : $(4) : $(5) : $(6) : $(7) : $(8) : $(9) : $(10) : - $(11) : $(12) : $(13) : $(14) : $(15) : $(16) : $(17) : $(18) : - $(19) ] ; - } -} - - -# Given a possibly qualified rule name and arguments, remove any initial module -# qualification from the rule and invoke it in that module. If there is no -# module qualification, the rule is invoked in the global module. Note that -# rules called this way may accept at most 18 parameters. -# -rule call-locally ( qualified-rule-name args * : * ) -{ - local module-rule = [ MATCH (.*)\\.(.*) : $(qualified-rule-name) ] ; - local rule-name = $(module-rule[2]) ; - rule-name ?= $(qualified-rule-name) ; - # We pass only 18 parameters here since Boost Jam allows at most 19 rule - # parameter positions and the call-in rule already uses up the initial - # position for the module name. - return [ call-in $(module-rule[1]) : $(rule-name) $(args) : $(2) : $(3) : - $(4) : $(5) : $(6) : $(7) : $(8) : $(9) : $(10) : $(11) : $(12) : $(13) - $(14) : $(15) : $(16) : $(17) : $(18) : $(19) ] ; -} - - -# Load the indicated module if it is not already loaded. -# -rule load ( - module-name # Name of module to load. Rules will be defined in this - # module. - : filename ? # (partial) path to file; Defaults to $(module-name).jam. - : search * # Directories in which to search for filename. Defaults to - # $(BOOST_BUILD_PATH). -) -{ - # Avoid loading modules twice. - if ! ( $(module-name) in $(.loaded) ) - { - filename ?= $(module-name).jam ; - - # Mark the module loaded so we do not try to load it recursively. - .loaded += $(module-name) ; - - # Suppress tests if any module loads are already in progress. - local suppress-test = $(.loading[1]) ; - - # Push this module on the loading stack. - .loading += $(module-name) ; - - # Remember that it is untested. - .untested += $(module-name) ; - - # Insert the new module's __name__ and __file__ globals. - poke $(module-name) : __name__ : $(module-name) ; - poke $(module-name) : __file__ : $(filename) ; - - module $(module-name) - { - # Add some grist so that the module will have a unique target name. - local module-target = $(__file__:G=module@) ; - - local search = $(3) ; - search ?= [ modules.peek : BOOST_BUILD_PATH ] ; - SEARCH on $(module-target) = $(search) ; - BINDRULE on $(module-target) = modules.record-binding ; - - include $(module-target) ; - - # Allow the module to see its own names with full qualification. - local rules = [ RULENAMES $(__name__) ] ; - IMPORT $(__name__) : $(rules) : $(__name__) : $(__name__).$(rules) ; - } - - if $(module-name) != modules && ! [ binding $(module-name) ] - { - import errors ; - errors.error "Could not find module" $(module-name) in $(search) ; - } - - # Pop the loading stack. Must happen before testing or we will run into - # a circular loading dependency. - .loading = $(.loading[1--2]) ; - - # Run any pending tests if this is an outer load. - if ! $(suppress-test) - { - local argv = [ peek : ARGV ] ; - for local m in $(.untested) - { - run-module-test $(m) ; - } - .untested = ; - } - } - else if $(module-name) in $(.loading) - { - import errors ; - errors.error loading \"$(module-name)\" - : circular module loading dependency: - : $(.loading)" ->" $(module-name) ; - } -} - - -# This helper is used by load (above) to record the binding (path) of each -# loaded module. -# -rule record-binding ( module-target : binding ) -{ - $(.loading[-1]).__binding__ = $(binding) ; -} - - -# Transform each path in the list, with all backslashes converted to forward -# slashes and all detectable redundancy removed. Something like this is probably -# needed in path.jam, but I am not sure of that, I do not understand it, and I -# am not ready to move all of path.jam into the kernel. -# -local rule normalize-raw-paths ( paths * ) -{ - local result ; - for p in $(paths:T) - { - result += [ NORMALIZE_PATH $(p) ] ; - } - return $(result) ; -} - - -.cwd = [ PWD ] ; - - -# Load the indicated module and import rule names into the current module. Any -# members of rules-opt will be available without qualification in the caller's -# module. Any members of rename-opt will be taken as the names of the rules in -# the caller's module, in place of the names they have in the imported module. -# If rules-opt = '*', all rules from the indicated module are imported into the -# caller's module. If rename-opt is supplied, it must have the same number of -# elements as rules-opt. -# -rule import ( module-names + : rules-opt * : rename-opt * ) -{ - if ( $(rules-opt) = * || ! $(rules-opt) ) && $(rename-opt) - { - import errors ; - errors.error "Rule aliasing is only available for explicit imports." ; - } - - if $(module-names[2]) && ( $(rules-opt) || $(rename-opt) ) - { - import errors ; - errors.error "When loading multiple modules, no specific rules or" - "renaming is allowed" ; - } - - local caller = [ CALLER_MODULE ] ; - - # Import each specified module - for local m in $(module-names) - { - if ! $(m) in $(.loaded) - { - # If the importing module is not already in the BOOST_BUILD_PATH, - # prepend it to the path. We do not want to invert the search order - # of modules that are already there. - - local caller-location ; - if $(caller) - { - caller-location = [ binding $(caller) ] ; - caller-location = $(caller-location:D) ; - caller-location = [ normalize-raw-paths - $(caller-location:R=$(.cwd)) ] ; - } - - local search = [ peek : BOOST_BUILD_PATH ] ; - search = [ normalize-raw-paths $(search:R=$(.cwd)) ] ; - - if $(caller-location) && ! $(caller-location) in $(search) - { - search = $(caller-location) $(search) ; - } - - load $(m) : : $(search) ; - } - - IMPORT_MODULE $(m) : $(caller) ; - - if $(rules-opt) - { - local source-names ; - if $(rules-opt) = * - { - local all-rules = [ RULENAMES $(m) ] ; - source-names = $(all-rules) ; - } - else - { - source-names = $(rules-opt) ; - } - local target-names = $(rename-opt) ; - target-names ?= $(source-names) ; - IMPORT $(m) : $(source-names) : $(caller) : $(target-names) ; - } - } -} - - -# Define exported copies in $(target-module) of all rules exported from -# $(source-module). Also make them available in the global module with -# qualification, so that it is just as though the rules were defined originally -# in $(target-module). -# -rule clone-rules ( source-module target-module ) -{ - local r = [ RULENAMES $(source-module) ] ; - IMPORT $(source-module) : $(r) : $(target-module) : $(r) : LOCALIZE ; - EXPORT $(target-module) : $(r) ; - IMPORT $(target-module) : $(r) : : $(target-module).$(r) ; -} - - -# These rules need to be available in all modules to implement module loading -# itself and other fundamental operations. -local globalize = peek poke record-binding ; -IMPORT modules : $(globalize) : : modules.$(globalize) ; - - -rule __test__ ( ) -{ - import assert ; - import modules : normalize-raw-paths ; - - module modules.__test__ - { - foo = bar ; - } - - assert.result bar : peek modules.__test__ : foo ; - - poke modules.__test__ : foo : bar baz ; - assert.result bar baz : peek modules.__test__ : foo ; - - assert.result c:/foo/bar : normalize-raw-paths c:/x/../foo/./xx/yy/../../bar ; - assert.result . : normalize-raw-paths . ; - assert.result .. : normalize-raw-paths .. ; - assert.result ../.. : normalize-raw-paths ../.. ; - assert.result .. : normalize-raw-paths ./.. ; - assert.result / / : normalize-raw-paths / \\ ; - assert.result a : normalize-raw-paths a ; - assert.result a : normalize-raw-paths a/ ; - assert.result /a : normalize-raw-paths /a/ ; - assert.result / : normalize-raw-paths /a/.. ; -} http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/options/help.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/options/help.jam b/ext/kenlm/jam-files/boost-build/options/help.jam deleted file mode 100644 index b507e1e..0000000 --- a/ext/kenlm/jam-files/boost-build/options/help.jam +++ /dev/null @@ -1,212 +0,0 @@ -# Copyright 2003 Dave Abrahams -# Copyright 2003, 2006 Rene Rivera -# Copyright 2003, 2006 Vladimir Prus -# Distributed under the Boost Software License, Version 1.0. -# (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) - -# This module is the plug-in handler for the --help and --help-.* -# command-line options -import modules ; -import assert ; -import doc : do-scan set-option set-output set-output-file print-help-usage print-help-top ; -import sequence ; -import set ; -import project ; -import print ; -import os ; -import version ; -import path ; - -# List of possible modules, but which really aren't. -# -.not-modules = - boost-build bootstrap site-config test user-config - -tools allyourbase boost-base features python stlport testing unit-tests ; - -# The help system options are parsed here and handed off to the doc -# module to translate into documentation requests and actions. The -# understood options are: -# -# --help-disable-<option> -# --help-doc-options -# --help-enable-<option> -# --help-internal -# --help-options -# --help-usage -# --help-output <type> -# --help-output-file <file> -# --help [<module-or-class>] -# -rule process ( - command # The option. - : values * # The values, starting after the "=". - ) -{ - assert.result --help : MATCH ^(--help).* : $(command) ; - local did-help = ; - switch $(command) - { - case --help-internal : - local path-to-modules = [ modules.peek : BOOST_BUILD_PATH ] ; - path-to-modules ?= . ; - local possible-modules = [ GLOB $(path-to-modules) : *\\.jam ] ; - local not-modules = [ GLOB $(path-to-modules) : *$(.not-modules)\\.jam ] ; - local modules-to-list = - [ sequence.insertion-sort - [ set.difference $(possible-modules:D=:S=) : $(not-modules:D=:S=) ] ] ; - local modules-to-scan ; - for local m in $(modules-to-list) - { - local module-files = [ GLOB $(path-to-modules) : $(m)\\.jam ] ; - modules-to-scan += $(module-files[1]) ; - } - do-scan $(modules-to-scan) : print-help-all ; - did-help = true ; - - case --help-enable-* : - local option = [ MATCH --help-enable-(.*) : $(command) ] ; option = $(option:L) ; - set-option $(option) : enabled ; - did-help = true ; - - case --help-disable-* : - local option = [ MATCH --help-disable-(.*) : $(command) ] ; option = $(option:L) ; - set-option $(option) ; - did-help = true ; - - case --help-output : - set-output $(values[1]) ; - did-help = true ; - - case --help-output-file : - set-output-file $(values[1]) ; - did-help = true ; - - case --help-doc-options : - local doc-module-spec = [ split-symbol doc ] ; - do-scan $(doc-module-spec[1]) : print-help-options ; - did-help = true ; - - case --help-options : - print-help-usage ; - did-help = true ; - - case --help : - local spec = $(values[1]) ; - if $(spec) - { - local spec-parts = [ split-symbol $(spec) ] ; - if $(spec-parts) - { - if $(spec-parts[2]) - { - do-scan $(spec-parts[1]) : print-help-classes $(spec-parts[2]) ; - do-scan $(spec-parts[1]) : print-help-rules $(spec-parts[2]) ; - do-scan $(spec-parts[1]) : print-help-variables $(spec-parts[2]) ; - } - else - { - do-scan $(spec-parts[1]) : print-help-module ; - } - } - else - { - EXIT "Unrecognized help option '"$(command)" "$(spec)"'." ; - } - } - else - { - version.print ; - ECHO ; - # First print documentation from the current Jamfile, if any. - # FIXME: Generally, this duplication of project.jam logic is bad. - local names = [ modules.peek project : JAMROOT ] - [ modules.peek project : JAMFILE ] ; - local project-file = [ path.glob . : $(names) ] ; - if ! $(project-file) - { - project-file = [ path.glob-in-parents . : $(names) ] ; - } - - for local p in $(project-file) - { - do-scan $(p) : print-help-project $(p) ; - } - - # Next any user-config help. - local user-path = [ os.home-directories ] [ os.environ BOOST_BUILD_PATH ] ; - local user-config = [ GLOB $(user-path) : user-config.jam ] ; - if $(user-config) - { - do-scan $(user-config[1]) : print-help-config user $(user-config[1]) ; - } - - # Next any site-config help. - local site-config = [ GLOB $(user-path) : site-config.jam ] ; - if $(site-config) - { - do-scan $(site-config[1]) : print-help-config site $(site-config[1]) ; - } - - # Then the overall help. - print-help-top ; - } - did-help = true ; - } - if $(did-help) - { - UPDATE all ; - NOCARE all ; - } - return $(did-help) ; -} - -# Split a reference to a symbol into module and symbol parts. -# -local rule split-symbol ( - symbol # The symbol to split. - ) -{ - local path-to-modules = [ modules.peek : BOOST_BUILD_PATH ] ; - path-to-modules ?= . ; - local module-name = $(symbol) ; - local symbol-name = ; - local result = ; - while ! $(result) - { - local module-path = [ GLOB $(path-to-modules) : $(module-name)\\.jam ] ; - if $(module-path) - { - # The 'module-name' in fact refers to module. Return the full - # module path and a symbol within it. If 'symbol' passed to this - # rule is already module, 'symbol-name' will be empty. Otherwise, - # it's initialized on the previous loop iteration. - # In case there are several modules by this name, - # use the first one. - result = $(module-path[1]) $(symbol-name) ; - } - else - { - if ! $(module-name:S) - { - result = - ; - } - else - { - local next-symbol-part = [ MATCH ^.(.*) : $(module-name:S) ] ; - if $(symbol-name) - { - symbol-name = $(next-symbol-part).$(symbol-name) ; - } - else - { - symbol-name = $(next-symbol-part) ; - } - module-name = $(module-name:B) ; - } - } - } - if $(result) != - - { - return $(result) ; - } -} http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/site-config.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/site-config.jam b/ext/kenlm/jam-files/boost-build/site-config.jam deleted file mode 100644 index 6afe526..0000000 --- a/ext/kenlm/jam-files/boost-build/site-config.jam +++ /dev/null @@ -1,11 +0,0 @@ -# Copyright 1999-2012 Gentoo Foundation -# Distributed under the Boost Software License, Version 1.0. -# (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) - -# Define two new variants to be used when building boost (or separate boost-libs) -# on Gentoo. The two variants make use of Gentoo-specific optimization and debug-symbols -# values "none" which are not part of the official boost distribution. -# DO NOT RELY ON THE FOLLOWING VARIANTS TO BE PRESENT ON OTHER OS! -variant gentoorelease : release : <optimization>none <debug-symbols>none <runtime-link>shared ; -variant gentoodebug : debug : <optimization>none <debug-symbols>on <runtime-link>shared ; - http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/tools/acc.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/tools/acc.jam b/ext/kenlm/jam-files/boost-build/tools/acc.jam deleted file mode 100644 index f04c9dc..0000000 --- a/ext/kenlm/jam-files/boost-build/tools/acc.jam +++ /dev/null @@ -1,118 +0,0 @@ -# Copyright Vladimir Prus 2004. -# Copyright Toon Knapen 2004. -# Copyright Boris Gubenko 2007. -# Distributed under the Boost Software License, Version 1.0. -# (See accompanying file LICENSE_1_0.txt -# or copy at http://www.boost.org/LICENSE_1_0.txt) - -# -# Boost.Build V2 toolset for the HP aC++ compiler. -# - -import toolset : flags ; -import feature ; -import generators ; -import common ; - -feature.extend toolset : acc ; -toolset.inherit acc : unix ; -generators.override builtin.lib-generator : acc.prebuilt ; -generators.override acc.searched-lib-generator : searched-lib-generator ; - -# Configures the acc toolset. -rule init ( version ? : user-provided-command * : options * ) -{ - local condition = [ common.check-init-parameters acc - : version $(version) ] ; - - local command = [ common.get-invocation-command acc : aCC - : $(user-provided-command) ] ; - - common.handle-options acc : $(condition) : $(command) : $(options) ; -} - - -# Declare generators -generators.register-c-compiler acc.compile.c : C : OBJ : <toolset>acc ; -generators.register-c-compiler acc.compile.c++ : CPP : OBJ : <toolset>acc ; - -# Declare flags. -flags acc CFLAGS <optimization>off : ; -flags acc CFLAGS <optimization>speed : -O3 ; -flags acc CFLAGS <optimization>space : -O2 ; - -flags acc CFLAGS <inlining>off : +d ; -flags acc CFLAGS <inlining>on : ; -flags acc CFLAGS <inlining>full : ; - -flags acc C++FLAGS <exception-handling>off : ; -flags acc C++FLAGS <exception-handling>on : ; - -flags acc C++FLAGS <rtti>off : ; -flags acc C++FLAGS <rtti>on : ; - -# We want the full path to the sources in the debug symbols because otherwise -# the debugger won't find the sources when we use boost.build. -flags acc CFLAGS <debug-symbols>on : -g ; -flags acc LINKFLAGS <debug-symbols>on : -g ; -flags acc LINKFLAGS <debug-symbols>off : -s ; - -# V2 does not have <shared-linkable>, not sure what this meant in V1. -# flags acc CFLAGS <shared-linkable>true : +Z ; - -flags acc CFLAGS <profiling>on : -pg ; -flags acc LINKFLAGS <profiling>on : -pg ; - -flags acc CFLAGS <address-model>64 : +DD64 ; -flags acc LINKFLAGS <address-model>64 : +DD64 ; - -# It is unknown if there's separate option for rpath used only -# at link time, similar to -rpath-link in GNU. We'll use -L. -flags acc RPATH_LINK : <xdll-path> ; - -flags acc CFLAGS <cflags> ; -flags acc C++FLAGS <cxxflags> ; -flags acc DEFINES <define> ; -flags acc UNDEFS <undef> ; -flags acc HDRS <include> ; -flags acc STDHDRS <sysinclude> ; -flags acc LINKFLAGS <linkflags> ; -flags acc ARFLAGS <arflags> ; - -flags acc LIBPATH <library-path> ; -flags acc NEEDLIBS <library-file> ; -flags acc FINDLIBS <find-shared-library> ; -flags acc FINDLIBS <find-static-library> ; - -# Select the compiler name according to the threading model. -flags acc CFLAGS <threading>multi : -mt ; -flags acc LINKFLAGS <threading>multi : -mt ; - -flags acc.compile.c++ TEMPLATE_DEPTH <c++-template-depth> ; - - -actions acc.link bind NEEDLIBS -{ - $(CONFIG_COMMAND) -AA $(LINKFLAGS) -o "$(<[1])" -L"$(RPATH_LINK)" -L$(LIBPATH) -L$(STDLIBPATH) "$(>)" "$(NEEDLIBS)" "$(NEEDLIBS)" -l$(FINDLIBS) $(OPTIONS) -} - -SPACE = " " ; -actions acc.link.dll bind NEEDLIBS -{ - $(CONFIG_COMMAND) -AA -b $(LINKFLAGS) -o "$(<[1])" -L"$(RPATH_LINK)" -Wl,+h$(<[-1]:D=) -L$(LIBPATH) -L$(STDLIBPATH) "$(>)" "$(NEEDLIBS)" "$(NEEDLIBS)" -l$(FINDLIBS) $(OPTIONS) -} - -actions acc.compile.c -{ - cc -c -I$(BOOST_ROOT) -U$(UNDEFS) -D$(DEFINES) $(CFLAGS) -I"$(HDRS)" -I"$(STDHDRS)" -o "$(<)" "$(>)" $(OPTIONS) -} - -actions acc.compile.c++ -{ - $(CONFIG_COMMAND) -AA -c -Wc,--pending_instantiations=$(TEMPLATE_DEPTH) -I$(BOOST_ROOT) -U$(UNDEFS) -D$(DEFINES) $(CFLAGS) $(C++FLAGS) -I"$(HDRS)" -I"$(STDHDRS)" -o "$(<)" "$(>)" $(OPTIONS) -} - -actions updated together piecemeal acc.archive -{ - ar ru$(ARFLAGS:E="") "$(<)" "$(>)" -} http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/tools/auto-index.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/tools/auto-index.jam b/ext/kenlm/jam-files/boost-build/tools/auto-index.jam deleted file mode 100644 index 41d0482..0000000 --- a/ext/kenlm/jam-files/boost-build/tools/auto-index.jam +++ /dev/null @@ -1,204 +0,0 @@ - -import feature ; -import generators ; -import "class" ; -import toolset ; -import targets ; -import "class" : new ; -import project ; - -feature.feature auto-index : off "on" ; -feature.feature auto-index-internal : off "on" ; -feature.feature auto-index-verbose : off "on" ; -feature.feature auto-index-no-duplicates : off "on" ; -feature.feature auto-index-script : : free path ; -feature.feature auto-index-prefix : : free path ; -feature.feature auto-index-type : : free ; -feature.feature auto-index-section-names : "on" off ; - -toolset.flags auto-index.auto-index FLAGS <auto-index-internal>on : --internal-index ; -toolset.flags auto-index.auto-index SCRIPT <auto-index-script> ; -toolset.flags auto-index.auto-index PREFIX <auto-index-prefix> ; -toolset.flags auto-index.auto-index INDEX_TYPE <auto-index-type> ; -toolset.flags auto-index.auto-index FLAGS <auto-index-verbose>on : --verbose ; -toolset.flags auto-index.auto-index FLAGS <auto-index-no-duplicates>on : --no-duplicates ; -toolset.flags auto-index.auto-index FLAGS <auto-index-section-names>off : --no-section-names ; - -# <auto-index-binary> shell command to run AutoIndex -# <auto-index-binary-dependencies> targets to build AutoIndex from sources. -feature.feature <auto-index-binary> : : free ; -feature.feature <auto-index-binary-dependencies> : : free dependency ; - -class auto-index-generator : generator -{ - import common modules path targets build-system ; - rule run ( project name ? : property-set : sources * ) - { - # AutoIndex invocation command and dependencies. - local auto-index-binary = [ modules.peek auto-index : .command ] ; - local auto-index-binary-dependencies ; - - if $(auto-index-binary) - { - # Use user-supplied command. - auto-index-binary = [ common.get-invocation-command auto-index : auto-index : $(auto-index-binary) ] ; - } - else - { - # Search for AutoIndex sources in sensible places, like - # $(BOOST_ROOT)/tools/auto_index - # $(BOOST_BUILD_PATH)/../../auto_index - - # And build auto-index executable from sources. - - local boost-root = [ modules.peek : BOOST_ROOT ] ; - local boost-build-path = [ build-system.location ] ; - local boost-build-path2 = [ modules.peek : BOOST_BUILD_PATH ] ; - - local auto-index-dir ; - - if $(boost-root) - { - auto-index-dir += [ path.join $(boost-root) tools ] ; - } - - if $(boost-build-path) - { - auto-index-dir += $(boost-build-path)/../.. ; - } - if $(boost-build-path2) - { - auto-index-dir += $(boost-build-path2)/.. ; - } - - #ECHO $(auto-index-dir) ; - auto-index-dir = [ path.glob $(auto-index-dir) : auto_index ] ; - #ECHO $(auto-index-dir) ; - - # If the AutoIndex source directory was found, mark its main target - # as a dependency for the current project. Otherwise, try to find - # 'auto-index' in user's PATH - if $(auto-index-dir) - { - auto-index-dir = [ path.make $(auto-index-dir[1]) ] ; - auto-index-dir = $(auto-index-dir)/build ; - - #ECHO $(auto-index-dir) ; - - # Get the main-target in AutoIndex directory. - local auto-index-main-target = [ targets.resolve-reference $(auto-index-dir) : $(project) ] ; - - #ECHO $(auto-index-main-target) ; - - # The first element are actual targets, the second are - # properties found in target-id. We do not care about these - # since we have passed the id ourselves. - auto-index-main-target = - [ $(auto-index-main-target[1]).main-target auto_index ] ; - - #ECHO $(auto-index-main-target) ; - - auto-index-binary-dependencies = - [ $(auto-index-main-target).generate [ $(property-set).propagated ] ] ; - - # Ignore usage-requirements returned as first element. - auto-index-binary-dependencies = $(auto-index-binary-dependencies[2-]) ; - - # Some toolsets generate extra targets (e.g. RSP). We must mark - # all targets as dependencies for the project, but we will only - # use the EXE target for auto-index-to-boostbook translation. - for local target in $(auto-index-binary-dependencies) - { - if [ $(target).type ] = EXE - { - auto-index-binary = - [ path.native - [ path.join - [ $(target).path ] - [ $(target).name ] - ] - ] ; - } - } - } - else - { - ECHO "AutoIndex warning: The path to the auto-index executable was" ; - ECHO " not provided. Additionally, couldn't find AutoIndex" ; - ECHO " sources searching in" ; - ECHO " * BOOST_ROOT/tools/auto-index" ; - ECHO " * BOOST_BUILD_PATH/../../auto-index" ; - ECHO " Will now try to find a precompiled executable by searching" ; - ECHO " the PATH for 'auto-index'." ; - ECHO " To disable this warning in the future, or to completely" ; - ECHO " avoid compilation of auto-index, you can explicitly set the" ; - ECHO " path to a auto-index executable command in user-config.jam" ; - ECHO " or site-config.jam with the call" ; - ECHO " using auto-index : /path/to/auto-index ;" ; - - # As a last resort, search for 'auto-index' command in path. Note - # that even if the 'auto-index' command is not found, - # get-invocation-command will still return 'auto-index' and might - # generate an error while generating the virtual-target. - - auto-index-binary = [ common.get-invocation-command auto-index : auto-index ] ; - } - } - - # Add $(auto-index-binary-dependencies) as a dependency of the current - # project and set it as the <auto-index-binary> feature for the - # auto-index-to-boostbook rule, below. - property-set = [ $(property-set).add-raw - <dependency>$(auto-index-binary-dependencies) - <auto-index-binary>$(auto-index-binary) - <auto-index-binary-dependencies>$(auto-index-binary-dependencies) - ] ; - - #ECHO "binary = " $(auto-index-binary) ; - #ECHO "dependencies = " $(auto-index-binary-dependencies) ; - - return [ generator.run $(project) $(name) : $(property-set) : $(sources) ] ; - } -} - -# Initialization of toolset. -# -# Parameters: -# command ? -> path to AutoIndex executable. -# -# When command is not supplied toolset will search for AutoIndex directory and -# compile the executable from source. If that fails we still search the path for -# 'auto_index'. -# -rule init ( - command ? # path to the AutoIndex executable. - ) -{ - if ! $(.initialized) - { - .initialized = true ; - .command = $(command) ; - } -} - -toolset.flags auto-index.auto-index AI-COMMAND <auto-index-binary> ; -toolset.flags auto-index.auto-index AI-DEPENDENCIES <auto-index-binary-dependencies> ; - -generators.register [ class.new auto-index-generator auto-index.auto-index : DOCBOOK : DOCBOOK(%.auto_index) : <auto-index>on ] ; -generators.override auto-index.auto-index : boostbook.boostbook-to-docbook ; - -rule auto-index ( target : source : properties * ) -{ - # Signal dependency of auto-index sources on <auto-index-binary-dependencies> - # upon invocation of auto-index-to-boostbook. - #ECHO "AI-COMMAND= " $(AI-COMMAND) ; - DEPENDS $(target) : [ on $(target) return $(AI-DEPENDENCIES) ] ; - #DEPENDS $(target) : [ on $(target) return $(SCRIPT) ] ; -} - -actions auto-index -{ - $(AI-COMMAND) $(FLAGS) "--prefix="$(PREFIX) "--script="$(SCRIPT) "--index-type="$(INDEX_TYPE) "--in="$(>) "--out="$(<) -} - - http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/tools/bison.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/tools/bison.jam b/ext/kenlm/jam-files/boost-build/tools/bison.jam deleted file mode 100644 index 0689d4b..0000000 --- a/ext/kenlm/jam-files/boost-build/tools/bison.jam +++ /dev/null @@ -1,32 +0,0 @@ -# Copyright 2003 Vladimir Prus -# Distributed under the Boost Software License, Version 1.0. -# (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) - -import generators ; -import feature ; -import type ; -import property ; - -feature.feature bison.prefix : : free ; -type.register Y : y ; -type.register YY : yy ; -generators.register-standard bison.bison : Y : C H ; -generators.register-standard bison.bison : YY : CPP HPP ; - -rule init ( ) -{ -} - -rule bison ( dst dst_header : src : properties * ) -{ - local r = [ property.select bison.prefix : $(properties) ] ; - if $(r) - { - PREFIX_OPT on $(<) = -p $(r:G=) ; - } -} - -actions bison -{ - bison $(PREFIX_OPT) -d -o $(<[1]) $(>) -} http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/tools/boostbook-config.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/tools/boostbook-config.jam b/ext/kenlm/jam-files/boost-build/tools/boostbook-config.jam deleted file mode 100644 index 6e3f3dd..0000000 --- a/ext/kenlm/jam-files/boost-build/tools/boostbook-config.jam +++ /dev/null @@ -1,13 +0,0 @@ -#~ Copyright 2005 Rene Rivera. -#~ Distributed under the Boost Software License, Version 1.0. -#~ (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) - -# Automatic configuration for BoostBook tools. To use, just import this module. -# -# This module is deprecated. -# using boostbook ; -# with no arguments now suffices. - -import toolset : using ; - -using boostbook ; http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/tools/boostbook.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/tools/boostbook.jam b/ext/kenlm/jam-files/boost-build/tools/boostbook.jam deleted file mode 100644 index de83dec..0000000 --- a/ext/kenlm/jam-files/boost-build/tools/boostbook.jam +++ /dev/null @@ -1,773 +0,0 @@ -# Copyright 2003, 2004, 2005 Dave Abrahams -# Copyright 2003, 2004, 2005 Douglas Gregor -# Copyright 2005, 2006, 2007 Rene Rivera -# Copyright 2003, 2004, 2005 Vladimir Prus -# Distributed under the Boost Software License, Version 1.0. -# (See accompanying file LICENSE_1_0.txt or copy at -# http://www.boost.org/LICENSE_1_0.txt) - -# This module defines rules to handle generation of documentation from BoostBook -# sources. -# -# The type of output is controlled by the <format> feature which can have the -# following values: -# * html: Generates html documentation. This is the default. -# * xhtml: Generates xhtml documentation. -# * htmlhelp: Generates html help output. -# * onehtml: Generates a single html page. -# * man: Generates man pages. -# * pdf: Generates pdf documentation. -# * ps: Generates postscript output. -# * docbook: Generates docbook XML. -# * fo: Generates XSL formating objects. -# * tests: Extracts test cases from the boostbook XML. -# -# <format> is an implicit feature, so for example, typing pdf on the command -# line is a short-cut for format=pdf. - -import build-system ; -import "class" : new ; -import common ; -import feature ; -import generators ; -import make ; -import modules ; -import os ; -import path ; -import print ; -import project ; -import property ; -import property-set ; -import regex ; -import scanner ; -import sequence ; -import targets ; -import type ; -import virtual-target ; -import xsltproc ; - -# Make this module into a project. -project.initialize $(__name__) ; -project boostbook ; - -.debug-configuration = [ MATCH ^(--debug-configuration)$ : [ modules.peek : ARGV - ] ] ; - -feature.feature format - : html xhtml htmlhelp onehtml man pdf ps docbook fo tests - : incidental implicit composite propagated ; - -type.register DTDXML : dtdxml ; -type.register XML : xml ; -type.register BOOSTBOOK : boostbook : XML ; -type.register DOCBOOK : docbook : XML ; -type.register FO : fo : XML ; -type.register PDF : pdf ; -type.register PS : ps ; -type.register XSLT : xsl : XML ; -type.register HTMLDIR ; -type.register XHTMLDIR ; -type.register HTMLHELP ; -type.register MANPAGES ; -type.register TESTS : tests ; - - -# Initialize BoostBook support. -# -rule init ( - docbook-xsl-dir ? # The DocBook XSL stylesheet directory. If not provided, - # we use DOCBOOK_XSL_DIR from the environment (if - # available) or look in standard locations. Otherwise, - # we let the XML processor load the stylesheets - # remotely. - - : docbook-dtd-dir ? # The DocBook DTD directory. If not provided, we use - # DOCBOOK_DTD_DIR From the environment (if available) or - # look in standard locations. Otherwise, we let the XML - # processor load the DTD remotely. - - : boostbook-dir ? # The BoostBook directory with the DTD and XSL subdirs. -) -{ - if ! $(.initialized) - { - .initialized = true ; - - check-boostbook-dir $(boostbook-dir) ; - find-tools $(docbook-xsl-dir) : $(docbook-dtd-dir) : $(boostbook-dir) ; - - # Register generators only if we were called via "using boostbook ;" - local reg-gen = generators.register-standard ; - $(reg-gen) boostbook.dtdxml-to-boostbook : DTDXML : XML ; - $(reg-gen) boostbook.boostbook-to-docbook : XML : DOCBOOK ; - $(reg-gen) boostbook.boostbook-to-tests : XML : TESTS ; - $(reg-gen) boostbook.docbook-to-onehtml : DOCBOOK : HTML ; - $(reg-gen) boostbook.docbook-to-htmldir : DOCBOOK : HTMLDIR ; - $(reg-gen) boostbook.docbook-to-xhtmldir : DOCBOOK : XHTMLDIR ; - $(reg-gen) boostbook.docbook-to-htmlhelp : DOCBOOK : HTMLHELP ; - $(reg-gen) boostbook.docbook-to-manpages : DOCBOOK : MANPAGES ; - $(reg-gen) boostbook.docbook-to-fo : DOCBOOK : FO ; - - # The same about Jamfile main target rules. - IMPORT $(__name__) : boostbook : : boostbook ; - } - else - { - if $(docbook-xsl-dir) - { - modify-config ; - .docbook-xsl-dir = [ path.make $(docbook-xsl-dir) ] ; - check-docbook-xsl-dir ; - } - if $(docbook-dtd-dir) - { - modify-config ; - .docbook-dtd-dir = [ path.make $(docbook-dtd-dir) ] ; - check-docbook-dtd-dir ; - } - if $(boostbook-dir) - { - modify-config ; - check-boostbook-dir $(boostbook-dir) ; - local boostbook-xsl-dir = [ path.glob $(boostbook-dir) : xsl ] ; - local boostbook-dtd-dir = [ path.glob $(boostbook-dir) : dtd ] ; - .boostbook-xsl-dir = $(boostbook-xsl-dir[1]) ; - .boostbook-dtd-dir = $(boostbook-dtd-dir[1]) ; - check-boostbook-xsl-dir ; - check-boostbook-dtd-dir ; - } - } -} - - -local rule lock-config ( ) -{ - if ! $(.initialized) - { - import errors ; - errors.user-error BoostBook has not been configured. ; - } - if ! $(.config-locked) - { - .config-locked = true ; - - if $(.error-message) - { - print-error $(.error-message) ; - } - } -} - - -local rule modify-config ( ) -{ - if $(.config-locked) - { - import errors ; - errors.user-error BoostBook configuration cannot be changed after it has - been used. ; - } -} - -rule print-error ( location message * ) -{ - ECHO error: at $(location) ; - ECHO error: $(message) ; - EXIT ; -} - -rule make-error ( message * ) -{ - return [ errors.nearest-user-location ] $(message) ; -} - - -rule find-boost-in-registry ( keys * ) -{ - local boost-root ; - for local R in $(keys) - { - local installed-boost = [ W32_GETREG - "HKEY_LOCAL_MACHINE\\SOFTWARE\\$(R)" : "InstallRoot" ] ; - if $(installed-boost) - { - boost-root += [ path.make $(installed-boost) ] ; - } - } - return $(boost-root) ; -} - - -rule check-docbook-xsl-dir ( ) -{ - if $(.docbook-xsl-dir) - { - if ! [ path.glob $(.docbook-xsl-dir) : common/common.xsl ] - { - import errors ; - .error-message = [ make-error BoostBook: could not find docbook XSL stylesheets - in: [ path.native $(.docbook-xsl-dir) ] ] ; - } - else if $(.debug-configuration) - { - ECHO notice: BoostBook: found docbook XSL stylesheets in: [ - path.native $(.docbook-xsl-dir) ] ; - } - } -} - - -rule check-docbook-dtd-dir ( ) -{ - if $(.docbook-dtd-dir) - { - if ! [ path.glob $(.docbook-dtd-dir) : docbookx.dtd ] - { - import errors ; - .error-message = [ make-error BoostBook: could not find docbook DTD in: [ - path.native $(.docbook-dtd-dir) ] ] ; - } - else if $(.debug-configuration) - { - ECHO notice: BoostBook: found docbook DTD in: [ path.native - $(.docbook-dtd-dir) ] ; - } - } -} - - -rule check-boostbook-xsl-dir ( ) -{ - if ! $(.boostbook-xsl-dir) - { - .error-message = [ make-error BoostBook: could not find boostbook XSL stylesheets. ] ; - } - else if ! [ path.glob $(.boostbook-xsl-dir) : docbook.xsl ] - { - .error-message = [ make-error BoostBook: could not find docbook XSL stylesheets in: - [ path.native $(.boostbook-xsl-dir) ] ] ; - } - else if $(.debug-configuration) - { - ECHO notice: BoostBook: found boostbook XSL stylesheets in: [ - path.native $(.boostbook-xsl-dir) ] ; - } -} - - -rule check-boostbook-dtd-dir ( ) -{ - if ! $(.boostbook-dtd-dir) - { - .error-message = [ make-error BoostBook: could not find boostbook DTD. ] ; - } - else if ! [ path.glob $(.boostbook-dtd-dir) : boostbook.dtd ] - { - .error-message = [ make-error BoostBook: could not find boostbook DTD in: [ - path.native $(.boostbook-dtd-dir) ] ] ; - } - else if $(.debug-configuration) - { - ECHO notice: BoostBook: found boostbook DTD in: [ path.native - $(.boostbook-dtd-dir) ] ; - } -} - - -rule check-boostbook-dir ( boostbook-dir ? ) -{ - if $(boostbook-dir) && ! [ path.glob $(boostbook-dir) : xsl ] - { - import errors ; - .error-message = [ make-error BoostBook: could not find boostbook in: [ path.native - $(boostbook-dir) ] ] ; - } -} - - -rule find-tools ( docbook-xsl-dir ? : docbook-dtd-dir ? : boostbook-dir ? ) -{ - docbook-xsl-dir ?= [ modules.peek : DOCBOOK_XSL_DIR ] ; - docbook-dtd-dir ?= [ modules.peek : DOCBOOK_DTD_DIR ] ; - boostbook-dir ?= [ modules.peek : BOOSTBOOK_DIR ] ; - - # Look for the boostbook stylesheets relative to BOOST_ROOT and Boost.Build. - local boost-build-root = [ path.make [ build-system.location ] ] ; - local boostbook-search-dirs = [ path.join $(boost-build-root) .. .. ] ; - - local boost-root = [ modules.peek : BOOST_ROOT ] ; - if $(boost-root) - { - boostbook-search-dirs += [ path.join [ path.make $(boost-root) ] tools ] - ; - } - boostbook-dir ?= [ path.glob $(boostbook-search-dirs) : boostbook* ] ; - - # Try to find the tools in platform specific locations. - if [ os.name ] = NT - { - # If installed by the Boost installer. - local boost-root = ; - - local boost-installer-versions = snapshot cvs 1.33.0 ; - local boost-consulting-installer-versions = 1.33.1 1.34.0 1.34.1 ; - local boostpro-installer-versions = - 1.35.0 1.36.0 1.37.0 1.38.0 1.39.0 1.40.0 1.41.0 1.42.0 - 1.43.0 1.44.0 1.45.0 1.46.0 1.47.0 1.48.0 1.49.0 1.50.0 ; - - local old-installer-root = [ find-boost-in-registry - Boost.org\\$(boost-installer-versions) ] ; - - # Make sure that the most recent version is searched for first. - boost-root += [ sequence.reverse [ find-boost-in-registry - Boost-Consulting.com\\$(boost-consulting-installer-versions) - boostpro.com\\$(boostpro-installer-versions) ] ] ; - - # Plausible locations. - local root = [ PWD ] ; - while $(root) != $(root:D) { root = $(root:D) ; } - root = [ path.make $(root) ] ; - local search-dirs ; - local docbook-search-dirs ; - for local p in $(boost-root) - { - search-dirs += [ path.join $(p) tools ] ; - } - for local p in $(old-installer-root) - { - search-dirs += [ path.join $(p) share ] ; - docbook-search-dirs += [ path.join $(p) share ] ; - } - search-dirs += [ path.join $(root) Boost tools ] ; - search-dirs += [ path.join $(root) Boost share ] ; - docbook-search-dirs += [ path.join $(root) Boost share ] ; - - docbook-xsl-dir ?= [ path.glob $(docbook-search-dirs) : docbook-xsl* ] ; - docbook-dtd-dir ?= [ path.glob $(docbook-search-dirs) : docbook-xml* ] ; - boostbook-dir ?= [ path.glob $(search-dirs) : boostbook* ] ; - } - else - { - # Plausible locations. - - local share = /usr/local/share /usr/share /opt/share /opt/local/share ; - local dtd-versions = 4.2 ; - - docbook-xsl-dir ?= [ path.glob $(share) : docbook-xsl* ] ; - docbook-xsl-dir ?= [ path.glob $(share)/sgml/docbook : xsl-stylesheets ] - ; - docbook-xsl-dir ?= [ path.glob $(share)/xsl : docbook* ] ; - - docbook-dtd-dir ?= [ path.glob $(share) : docbook-xml* ] ; - docbook-dtd-dir ?= [ path.glob $(share)/sgml/docbook : - xml-dtd-$(dtd-versions)* ] ; - docbook-dtd-dir ?= [ path.glob $(share)/xml/docbook : $(dtd-versions) ] - ; - - boostbook-dir ?= [ path.glob $(share) : boostbook* ] ; - - # Ubuntu Linux. - docbook-xsl-dir ?= [ path.glob /usr/share/xml/docbook/stylesheet : - nwalsh ] ; - docbook-dtd-dir ?= [ path.glob /usr/share/xml/docbook/schema/dtd : - $(dtd-versions) ] ; - - # SUSE. - docbook-xsl-dir ?= [ path.glob /usr/share/xml/docbook/stylesheet/nwalsh - : current ] ; - } - - if $(docbook-xsl-dir) - { - .docbook-xsl-dir = [ path.make $(docbook-xsl-dir[1]) ] ; - } - if $(docbook-dtd-dir) - { - .docbook-dtd-dir = [ path.make $(docbook-dtd-dir[1]) ] ; - } - - if $(.debug-configuration) - { - ECHO notice: Boost.Book: searching XSL/DTD "in" ; - ECHO notice: [ sequence.transform path.native : $(boostbook-dir) ] ; - } - local boostbook-xsl-dir ; - for local dir in $(boostbook-dir) - { - boostbook-xsl-dir += [ path.glob $(dir) : xsl ] ; - } - local boostbook-dtd-dir ; - for local dir in $(boostbook-dir) - { - boostbook-dtd-dir += [ path.glob $(dir) : dtd ] ; - } - .boostbook-xsl-dir = $(boostbook-xsl-dir[1]) ; - .boostbook-dtd-dir = $(boostbook-dtd-dir[1]) ; - - check-docbook-xsl-dir ; - check-docbook-dtd-dir ; - check-boostbook-xsl-dir ; - check-boostbook-dtd-dir ; -} - - -rule xsl-dir -{ - lock-config ; - return $(.boostbook-xsl-dir) ; -} - - -rule dtd-dir -{ - lock-config ; - return $(.boostbook-dtd-dir) ; -} - - -rule docbook-xsl-dir -{ - lock-config ; - return $(.docbook-xsl-dir) ; -} - - -rule docbook-dtd-dir -{ - lock-config ; - return $(.docbook-dtd-dir) ; -} - - -rule dtdxml-to-boostbook ( target : source : properties * ) -{ - lock-config ; - xsltproc.xslt $(target) : $(source) - "$(.boostbook-xsl-dir)/dtd/dtd2boostbook.xsl" : $(properties) ; -} - - -rule boostbook-to-docbook ( target : source : properties * ) -{ - lock-config ; - local stylesheet = [ path.native $(.boostbook-xsl-dir)/docbook.xsl ] ; - xsltproc.xslt $(target) : $(source) $(stylesheet) : $(properties) ; -} - - -rule docbook-to-onehtml ( target : source : properties * ) -{ - lock-config ; - local stylesheet = [ path.native $(.boostbook-xsl-dir)/html-single.xsl ] ; - xsltproc.xslt $(target) : $(source) $(stylesheet) : $(properties) ; -} - - -rule docbook-to-htmldir ( target : source : properties * ) -{ - lock-config ; - local stylesheet = [ path.native $(.boostbook-xsl-dir)/html.xsl ] ; - xsltproc.xslt-dir $(target) : $(source) $(stylesheet) : $(properties) : html - ; -} - - -rule docbook-to-xhtmldir ( target : source : properties * ) -{ - lock-config ; - local stylesheet = [ path.native $(.boostbook-xsl-dir)/xhtml.xsl ] ; - xsltproc.xslt-dir $(target) : $(source) $(stylesheet) : $(properties) : - xhtml ; -} - - -rule docbook-to-htmlhelp ( target : source : properties * ) -{ - lock-config ; - local stylesheet = [ path.native $(.boostbook-xsl-dir)/html-help.xsl ] ; - xsltproc.xslt-dir $(target) : $(source) $(stylesheet) : $(properties) : - htmlhelp ; -} - - -rule docbook-to-manpages ( target : source : properties * ) -{ - lock-config ; - local stylesheet = [ path.native $(.boostbook-xsl-dir)/manpages.xsl ] ; - xsltproc.xslt-dir $(target) : $(source) $(stylesheet) : $(properties) : man - ; -} - - -rule docbook-to-fo ( target : source : properties * ) -{ - lock-config ; - local stylesheet = [ path.native $(.boostbook-xsl-dir)/fo.xsl ] ; - xsltproc.xslt $(target) : $(source) $(stylesheet) : $(properties) ; -} - - -rule format-catalog-path ( path ) -{ - local result = $(path) ; - if [ xsltproc.is-cygwin ] - { - if [ os.name ] = NT - { - drive = [ MATCH ^/(.):(.*)$ : $(path) ] ; - result = /cygdrive/$(drive[1])$(drive[2]) ; - } - } - else - { - if [ os.name ] = CYGWIN - { - local native-path = [ path.native $(path) ] ; - result = [ path.make $(native-path:W) ] ; - } - } - return [ regex.replace $(result) " " "%20" ] ; -} - - -rule generate-xml-catalog ( target : sources * : properties * ) -{ - print.output $(target) ; - - # BoostBook DTD catalog entry. - local boostbook-dtd-dir = [ boostbook.dtd-dir ] ; - if $(boostbook-dtd-dir) - { - boostbook-dtd-dir = [ format-catalog-path $(boostbook-dtd-dir) ] ; - } - - print.text - "<?xml version=\"1.0\"?>" - "<!DOCTYPE catalog " - " PUBLIC \"-//OASIS/DTD Entity Resolution XML Catalog V1.0//EN\"" - " \"http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd\";>" - "<catalog xmlns=\"urn:oasis:names:tc:entity:xmlns:xml:catalog\">" - " <rewriteURI uriStartString=\"http://www.boost.org/tools/boostbook/dtd/\"; rewritePrefix=\"file://$(boostbook-dtd-dir)/\"/>" - : true ; - - local docbook-xsl-dir = [ boostbook.docbook-xsl-dir ] ; - if ! $(docbook-xsl-dir) - { - ECHO "BoostBook warning: no DocBook XSL directory specified." ; - ECHO " If you have the DocBook XSL stylesheets installed, please " ; - ECHO " set DOCBOOK_XSL_DIR to the stylesheet directory on either " ; - ECHO " the command line (via -sDOCBOOK_XSL_DIR=...) or in a " ; - ECHO " Boost.Jam configuration file. The DocBook XSL stylesheets " ; - ECHO " are available here: http://docbook.sourceforge.net/ " ; - ECHO " Stylesheets will be downloaded on-the-fly (very slow!) " ; - } - else - { - docbook-xsl-dir = [ format-catalog-path $(docbook-xsl-dir) ] ; - print.text " <rewriteURI uriStartString=\"http://docbook.sourceforge.net/release/xsl/current/\"; rewritePrefix=\"file://$(docbook-xsl-dir)/\"/>" ; - } - - local docbook-dtd-dir = [ boostbook.docbook-dtd-dir ] ; - if ! $(docbook-dtd-dir) - { - ECHO "BoostBook warning: no DocBook DTD directory specified." ; - ECHO " If you have the DocBook DTD installed, please set " ; - ECHO " DOCBOOK_DTD_DIR to the DTD directory on either " ; - ECHO " the command line (via -sDOCBOOK_DTD_DIR=...) or in a " ; - ECHO " Boost.Jam configuration file. The DocBook DTD is available " ; - ECHO " here: http://www.oasis-open.org/docbook/xml/4.2/index.shtml"; ; - ECHO " The DTD will be downloaded on-the-fly (very slow!) " ; - } - else - { - docbook-dtd-dir = [ format-catalog-path $(docbook-dtd-dir) ] ; - print.text " <rewriteURI uriStartString=\"http://www.oasis-open.org/docbook/xml/4.2/\"; rewritePrefix=\"file://$(docbook-dtd-dir)/\"/>" ; - } - - print.text "</catalog>" ; -} - - -# Returns information about the global XML catalog target, creating it lazily if -# needed. To get the global catalog generated only once we do not create it in -# every project that requests it but instead only create it based on the first -# project requesting it and then reuse it from there for any later requests. -# -# To get 'as close as possible' to having the global catalog stored in the same -# location independent of which folder our build was run from, we assign its -# target to the given project's base Jamroot project. This works correctly as -# long as we know the passed project is not standalone or one of Boost Build's -# configuration module projects, as those to not have a Jamroot project in their -# parent chain. Note also that we can still get our targets generated in -# different folders in case when one build project references a target from -# another build project with its own separate Jamroot. -# -# FIXME: Ideally the catalog target should be created as part of the boostbook -# project and stored in some central location for all used standalone pojects, -# shared between all builds made on that system. This however would require much -# more though to add the necessary changes to Boost Build's internal design. -# -local rule xml-catalog ( project ) -{ - if ! $(.xml-catalog) - { - local project-module = [ $(project).project-module ] ; - local root-module = [ project.get-jamroot-module $(project-module) ] ; - if ! $(root-module) - { - import errors ; - if [ project.is-config-module $(project-module) ] - { - errors.user-error boostbook targets can not be declared in Boost - Build's configuration modules. ; - } - else - { - errors.user-error boostbook targets can not be declared in - standalone projects. : use a Jamfile/Jamroot project - instead. ; - } - } - local root-project = [ project.target $(root-module) ] ; - - .xml-catalog = [ virtual-target.register [ new file-target - boostbook_catalog : XML : $(root-project) : [ new action : - boostbook.generate-xml-catalog ] ] ] ; - .xml-catalog-file = [ $(.xml-catalog).path ] [ $(.xml-catalog).name ] ; - .xml-catalog-file = $(.xml-catalog-file:J=/) ; - } - return $(.xml-catalog) $(.xml-catalog-file) ; -} - - -class boostbook-target-class : basic-target -{ - import generators ; - import property-set ; - import virtual-target ; - - rule construct ( name : sources * : property-set ) - { - # Generate the catalog, but only once. - IMPORT boostbook : xml-catalog : $(__name__) : boostbook.xml-catalog ; - local global-catalog = [ boostbook.xml-catalog [ project ] ] ; - local catalog = $(global-catalog[1]) ; - local catalog-file = $(global-catalog[2]) ; - local targets ; - - # Add the catalog to the property set. - property-set = [ $(property-set).add-raw <catalog>$(catalog-file) ] ; - - local type = none ; - local manifest ; - local format = [ $(property-set).get <format> ] ; - switch $(format) - { - case html : type = HTMLDIR ; manifest = HTML.manifest ; - case xhtml : type = XHTMLDIR ; manifest = HTML.manifest ; - case htmlhelp : type = HTMLHELP ; manifest = HTML.manifest ; - case onehtml : type = HTML ; - case man : type = MANPAGES ; manifest = man.manifest ; - case docbook : type = DOCBOOK ; - case fo : type = FO ; - case pdf : type = PDF ; - case ps : type = PS ; - case tests : type = TESTS ; - } - - local target ; - if $(manifest) - { - # Sources --> DOCBOOK. - local docbook-target = [ generators.construct [ project ] : DOCBOOK - : $(property-set) : $(sources) ] ; - docbook-target = $(docbook-target[2]) ; - $(docbook-target).depends $(catalog) ; - - # DOCBOOK --> type. - target = [ generators.construct [ project ] $(name)_$(manifest) : - $(type) : [ $(property-set).add-raw - <xsl:param>manifest=$(name)_$(manifest) ] : $(docbook-target) ] - ; - target = $(target[2]) ; - local name = [ $(property-set).get <name> ] ; - name ?= $(format) ; - $(target).set-path $(name) ; - } - else - { - # Sources --> type. - target = [ generators.construct [ project ] : $(type) : - $(property-set) : $(sources) ] ; - target = $(target[2]) ; - if ! $(target) - { - import errors ; - errors.error Cannot build documentation type '$(format)'. ; - } - } - $(target).depends $(catalog) ; - - return [ property-set.empty ] $(target) ; - } -} - - -# Declare a boostbook target. -# -rule boostbook ( target-name : sources * : requirements * : default-build * ) -{ - return [ targets.create-metatarget boostbook-target-class : - [ project.current ] : $(target-name) : $(sources) : $(requirements) : - $(default-build) ] ; -} - - -rule boostbook-to-tests ( target : source : properties * ) -{ - lock-config ; - local boost_root = [ modules.peek : BOOST_ROOT ] ; - local native-path = [ path.native [ path.join $(.boostbook-xsl-dir) testing - Jamfile ] ] ; - local stylesheet = $(native-path:S=.xsl) ; - xsltproc.xslt $(target) : $(source) $(stylesheet) : $(properties) - <xsl:param>boost.root=$(boost_root) ; -} - - -############################################################################# -# Dependency scanners -############################################################################# -# XInclude scanner. Mostly stolen from c-scanner. :) -# Note that this assumes an "xi" prefix for XIncludes. This is not always the -# case for XML documents, but we assume it is true for anything we encounter. -# -class xinclude-scanner : scanner -{ - import scanner ; - - rule __init__ ( includes * ) - { - scanner.__init__ ; - self.includes = $(includes) ; - } - - rule pattern ( ) - { - return "xi:include[ ]*href=\"([^\"]*)\"" ; - } - - rule process ( target : matches * : binding ) - { - local target_path = [ NORMALIZE_PATH $(binding:D) ] ; - - NOCARE $(matches) ; - INCLUDES $(target) : $(matches) ; - SEARCH on $(matches) = $(target_path) $(self.includes:G=) ; - - scanner.propagate $(__name__) : $(matches) : $(target) ; - } -} - -scanner.register xinclude-scanner : xsl:path ; -type.set-scanner XML : xinclude-scanner ; http://git-wip-us.apache.org/repos/asf/incubator-joshua/blob/6da3961b/ext/kenlm/jam-files/boost-build/tools/borland.jam ---------------------------------------------------------------------- diff --git a/ext/kenlm b/ext/kenlm new file mode 160000 index 0000000..56fdb5c --- /dev/null +++ b/ext/kenlm @@ -0,0 +1 @@ +Subproject commit 56fdb5c44fca34d5a2e07d96139c28fb163983c5 diff --git a/ext/kenlm/jam-files/boost-build/tools/borland.jam b/ext/kenlm/jam-files/boost-build/tools/borland.jam deleted file mode 100644 index 6e43ca9..0000000 --- a/ext/kenlm/jam-files/boost-build/tools/borland.jam +++ /dev/null @@ -1,220 +0,0 @@ -# Copyright 2005 Dave Abrahams -# Copyright 2003 Rene Rivera -# Copyright 2003, 2004, 2005 Vladimir Prus -# Distributed under the Boost Software License, Version 1.0. -# (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) - -# Support for the Borland's command line compiler - -import property ; -import generators ; -import os ; -import toolset : flags ; -import feature : get-values ; -import type ; -import common ; - -feature.extend toolset : borland ; - -rule init ( version ? : command * : options * ) -{ - local condition = [ common.check-init-parameters borland : - version $(version) ] ; - - local command = [ common.get-invocation-command borland : bcc32.exe - : $(command) ] ; - - common.handle-options borland : $(condition) : $(command) : $(options) ; - - if $(command) - { - command = [ common.get-absolute-tool-path $(command[-1]) ] ; - } - root = $(command:D) ; - - flags borland.compile STDHDRS $(condition) : $(root)/include/ ; - flags borland.link STDLIBPATH $(condition) : $(root)/lib ; - flags borland.link RUN_PATH $(condition) : $(root)/bin ; - flags borland .root $(condition) : $(root)/bin/ ; -} - - -# A borland-specific target type -type.register BORLAND.TDS : tds ; - -# Declare generators - -generators.register-linker borland.link : OBJ SEARCHED_LIB STATIC_LIB IMPORT_LIB : EXE : <toolset>borland ; -generators.register-linker borland.link.dll : OBJ SEARCHED_LIB STATIC_LIB IMPORT_LIB : SHARED_LIB IMPORT_LIB : <toolset>borland ; - -generators.register-archiver borland.archive : OBJ : STATIC_LIB : <toolset>borland ; -generators.register-c-compiler borland.compile.c++ : CPP : OBJ : <toolset>borland ; -generators.register-c-compiler borland.compile.c : C : OBJ : <toolset>borland ; -generators.register-standard borland.asm : ASM : OBJ : <toolset>borland ; - -# Declare flags - -flags borland.compile OPTIONS <debug-symbols>on : -v ; -flags borland.link OPTIONS <debug-symbols>on : -v ; - -flags borland.compile OPTIONS <optimization>off : -Od ; -flags borland.compile OPTIONS <optimization>speed : -O2 ; -flags borland.compile OPTIONS <optimization>space : -O1 ; - -if $(.BORLAND_HAS_FIXED_INLINING_BUGS) -{ - flags borland CFLAGS <inlining>off : -vi- ; - flags borland CFLAGS <inlining>on : -vi -w-inl ; - flags borland CFLAGS <inlining>full : -vi -w-inl ; -} -else -{ - flags borland CFLAGS : -vi- ; -} - -flags borland.compile OPTIONS <warnings>off : -w- ; -flags borland.compile OPTIONS <warnings>all : -w ; -flags borland.compile OPTIONS <warnings-as-errors>on : -w! ; - - -# Deal with various runtime configs... - -# This should be not for DLL -flags borland OPTIONS <user-interface>console : -tWC ; - -# -tWR sets -tW as well, so we turn it off here and then turn it -# on again later if we need it: -flags borland OPTIONS <runtime-link>shared : -tWR -tWC ; -flags borland OPTIONS <user-interface>gui : -tW ; - -flags borland OPTIONS <main-target-type>LIB/<link>shared : -tWD ; -# Hmm.. not sure what's going on here. -flags borland OPTIONS : -WM- ; -flags borland OPTIONS <threading>multi : -tWM ; - - - -flags borland.compile OPTIONS <cxxflags> ; -flags borland.compile DEFINES <define> ; -flags borland.compile INCLUDES <include> ; - -flags borland NEED_IMPLIB <main-target-type>LIB/<link>shared : "" ; - -# -# for C++ compiles the following options are turned on by default: -# -# -j5 stops after 5 errors -# -g255 allow an unlimited number of warnings -# -q no banner -# -c compile to object -# -P C++ code regardless of file extention -# -a8 8 byte alignment, this option is on in the IDE by default -# and effects binary compatibility. -# - -# -U$(UNDEFS) -D$(DEFINES) $(CFLAGS) $(C++FLAGS) -I"$(HDRS)" -I"$(STDHDRS)" -o"$(<)" "$(>)" - - -actions compile.c++ -{ - "$(CONFIG_COMMAND)" -j5 -g255 -q -c -P -a8 -Vx- -Ve- -b- $(OPTIONS) -D$(DEFINES) -I"$(INCLUDES)" -I"$(STDHDRS)" -o"$(<)" "$(>)" -} - -# For C, we don't pass -P flag -actions compile.c -{ - "$(CONFIG_COMMAND)" -j5 -g255 -q -c -a8 -Vx- -Ve- -b- $(OPTIONS) -D$(DEFINES) -I"$(INCLUDES)" -I"$(STDHDRS)" -o"$(<)" "$(>)" -} - - -# Declare flags and action for linking -toolset.flags borland.link OPTIONS <debug-symbols>on : -v ; -toolset.flags borland.link LIBRARY_PATH <library-path> ; -toolset.flags borland.link FINDLIBS_ST <find-static-library> ; -toolset.flags borland.link FINDLIBS_SA <find-shared-library> ; -toolset.flags borland.link LIBRARIES <library-file> ; - -flags borland.link OPTIONS <linkflags> ; -flags borland.link OPTIONS <link>shared : -tWD ; - -flags borland.link LIBRARY_PATH_OPTION <toolset>borland : -L : unchecked ; -flags borland.link LIBRARY_OPTION <toolset>borland : "" : unchecked ; - - - -# bcc32 needs to have ilink32 in the path in order to invoke it, so explicitly -# specifying $(BCC_TOOL_PATH)bcc32 doesn't help. You need to add -# $(BCC_TOOL_PATH) to the path -# The NEED_IMPLIB variable controls whether we need to invoke implib. - -flags borland.archive AROPTIONS <archiveflags> ; - -# Declare action for archives. We don't use response file -# since it's hard to get "+-" there. -# The /P256 increases 'page' size -- with too low -# values tlib fails when building large applications. -# CONSIDER: don't know what 'together' is for... -actions updated together piecemeal archive -{ - $(.set-path)$(.root:W)$(.old-path) - tlib $(AROPTIONS) /P256 /u /a /C "$(<:W)" +-"$(>:W)" -} - - -if [ os.name ] = CYGWIN -{ - .set-path = "cmd /S /C set \"PATH=" ; - .old-path = ";%PATH%\" \"&&\"" ; - - - # Couldn't get TLIB to stop being confused about pathnames - # containing dashes (it seemed to treat them as option separators - # when passed through from bash), so we explicitly write the - # command into a .bat file and execute that. TLIB is also finicky - # about pathname style! Forward slashes, too, are treated as - # options. - actions updated together piecemeal archive - { - chdir $(<:D) - echo +-$(>:BS) > $(<:BS).rsp - $(.set-path)$(.root)$(.old-path) "tlib.exe" $(AROPTIONS) /P256 /C $(<:BS) @$(<:BS).rsp && $(RM) $(<:BS).rsp - } -} -else if [ os.name ] = NT -{ - .set-path = "set \"PATH=" ; - .old-path = ";%PATH%\" - " ; -} -else -{ - .set-path = "PATH=\"" ; - .old-path = "\":$PATH - export PATH - " ; -} - -RM = [ common.rm-command ] ; - -nl = " -" ; - -actions link -{ - $(.set-path)$(.root:W)$(.old-path) "$(CONFIG_COMMAND)" -v -q $(OPTIONS) -L"$(LIBRARY_PATH:W)" -L"$(STDLIBPATH:W)" -e"$(<[1]:W)" @"@($(<[1]:W).rsp:E=$(nl)"$(>)" $(nl)$(LIBRARIES) $(nl)"$(LIBRARY_OPTION)$(FINDLIBS_ST:S=.lib)" $(nl)"$(LIBRARY_OPTION)$(FINDLIBS_SA:S=.lib)")" -} - - -actions link.dll bind LIBRARIES RSP -{ - $(.set-path)$(.root:W)$(.old-path) "$(CONFIG_COMMAND)" -v -q $(OPTIONS) -L"$(LIBRARY_PATH:W)" -L"$(STDLIBPATH:W)" -e"$(<[1]:W)" @"@($(<[1]:W).rsp:E=$(nl)"$(>)" $(nl)$(LIBRARIES) $(nl)"$(LIBRARY_OPTION)$(FINDLIBS_ST:S=.lib)" $(nl)"$(LIBRARY_OPTION)$(FINDLIBS_SA:S=.lib)")" && "$(.root)implib" "$(<[2]:W)" "$(<[1]:W)" -} - -# It seems impossible to specify output file with directory when compiling -# asm files using bcc32, so use tasm32 directly. -# /ml makes all symbol names case-sensitive -actions asm -{ - $(.set-path)$(.root:W)$(.old-path) tasm32.exe /ml "$(>)" "$(<)" -} -
