mintisan edited a comment on issue #1287: blinky demo for STM32F4-Discovery not works on STM32F429I-Discovery URL: https://github.com/apache/mynewt-core/issues/1287#issuecomment-406872408 I tried to use `stm32f429discovery ` to re-build, but I can't load successfully after building. ``` ➜ blinking newt load stm32f429disc_blinky Loading app image into slot 1 Error: Downloading /Users/linjinhui/Github/mynewt/blinking/bin/targets/stm32f429disc_blinky/app/apps/blinky/blinky.img to 0x8020000 Open On-Chip Debugger 0.10.0 Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD adapter speed: 2000 kHz adapter_nsrst_delay: 100 none separate srst_only separate srst_nogate srst_open_drain connect_deassert_srst Info : Unable to match requested speed 2000 kHz, using 1800 kHz Info : Unable to match requested speed 2000 kHz, using 1800 kHz Info : clock speed 1800 kHz Error: open failed in procedure 'init' called at file ".openocd_cmds", line 2 in procedure 'ocd_bouncer' load - Load application image on to the board for <target-name> Usage: newt load <target-name> [flags] Flags: --extrajtagcmd string Extra commands to send to JTAG software Global Flags: -h, --help Help for newt commands -j, --jobs int Number of concurrent build jobs (default 4) -l, --loglevel string Log level (default "WARN") -o, --outfile string Filename to tee output to -q, --quiet Be quiet; only display error output -s, --silent Be silent; don't output anything -v, --verbose Enable verbose output when executing commands ➜ blinking ```
---------------------------------------------------------------- This is an automated message from the Apache Git Service. To respond to the message, please log on GitHub and use the URL above to go to the specific comment. For queries about this service, please contact Infrastructure at: [email protected] With regards, Apache Git Services
