lawrence-king commented on issue #15: URL: https://github.com/apache/mynewt-mcumgr-cli/issues/15#issuecomment-668692368
Yes this did work for me, same problem, however there are many other variables involved (windows version, driver for BT adapter, BT adapter chipset, laptop manufacturer, just to name a few). Sorry to hear it didn’t work for you. As I mentioned my longer term solution was to not share the BT adapter with the laptop OS. Lawrence King Principal Developer +1(416)627-7302 From: CaCO3 <[email protected]> Sent: Tuesday, August 4, 2020 11:37 AM To: apache/mynewt-mcumgr-cli <[email protected]> Cc: Lawrence King <[email protected]>; Mention <[email protected]> Subject: Re: [apache/mynewt-mcumgr-cli] Fails to upload over BLE using Zephyr with SMP Server Sample (#15) Hi @lawrence-king<https://github.com/lawrence-king> Try moving the Zephyr target about 15ft away from the laptop. This worked for me (Lenovo laptop with built-in Intel bluetooth chip USB\VID_8087&PID_0A2B&REV_0010). So you want to say you had the SAME error and you could fix it by moving away 5 meters? That sounds rater odd, because the other commands worked fine, so the BLE link should be ok! Nevertheless, I tried it 😄 but had sadly no improvements 😒 — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub<https://github.com/apache/mynewt-mcumgr-cli/issues/15#issuecomment-668669678>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AOG3YIBOZV54FABZU44LBHLR7ATLNANCNFSM4PTTHQMQ>. ---------------------------------------------------------------- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. For queries about this service, please contact Infrastructure at: [email protected]
